A2, exe close button does not

Similar Questions

• Minimize/maximize/close buttons does not...

  Minimize/maximize/close buttons do not work when you run Aero.  Whenever I change my Aero, reduce it and expand buttons work but the close button still does not work.  This happens with all the windows and I'll have to use the Task Manager to close the windows and I have to close the task with the exit button Manager because the close button does not work on either.

  Hello

  Thank you for using the Microsoft Windows Vista Forums.

  I will need some additional information to help you best.

  O if it works well before?

  Ø summers - get you any error message?

  O have changes made to your computer recently?

  In the meantime, follow the instructions below that may help you resolve the issue.

  Method 1:

  To perform the clean boot procedure, follow the instructions in the link below.

  Step 1: Perform a clean boot

  Step 2: Enable half the services

  Step 3: Determine whether the problem returns

  Step 4: Enable half of the startup items
  Step 5: Determine whether the problem returns

  Step 6: Resolve the problem

  Step 7: Reset the computer to start as usual

  How to troubleshoot a problem by performing a clean boot in Windows Vista

  http://support.Microsoft.com/kb/929135

  After checking the problem, turn the computer back to the Normal mode.

  Uninstall or update the program that is causing the problem.

  Method 2:

  Windows Live OneCare safety scanner is a free service designed to help ensure the health of your PC.

  • Check and remove viruses
  • Get rid of junk on your hard disk
  • Improve the performance of your PC

  Click on the link below for Online Virus scanner.

  http://safety.live.com/

  Check whether the problem is resolved.

  Method 3:

  Analysis of auditor of file system (CFS) that might help you resolve the issue.

  To determine if the problem you are experiencing is caused by one or more system files that are used by Windows Vista, run the System File Checker tool. The System File Checker tool analyzes the system files and replaces incorrect versions of system files by using the correct versions.

  To determine if the problem you are experiencing is caused by one or more system files that are used by Windows Vista, run the System File Checker tool. The System File Checker tool analyzes the system files and replaces incorrect versions of system files by using the correct versions.

  To run the System File Checker tool, follow these steps:

  1. Click Start and type cmd in the box start the search.

  2. right click on cmd in the list programs and then click Run as administrator.

  If you are prompted for an administrator password or a confirmation, type your password or click on continue

  3. at the command prompt, the following line, and then press ENTER:

  sfc/scannow

  When the analysis is complete, test to see if the problem you are experiencing is resolved. If the problem you are experiencing is not resolved, use the procedure that is described in the section "the System Restore tool.

  Follow the instructions in the link below for more information on scan SFC.

  http://support.Microsoft.com/kb/936212/

  Please post back and let us know if it helped to solve your problem.

  Kind regards

  KarthiK TP

• Replacement drive DVD open/close button does not reach (model HP p6110f)

  Hi all

  I replaced my DVD drive on my P6110F desktop with a model from Asus. Everything works fine * except * the fact that existing teeth of the open/close Panel button do not reach the real button on the disc itself, me leaving no option but to use a desktop widget to open the CD tray.

  I searched on the net and can't seem to find a solution. Any ideas on how to make this work? Thanks for your suggestions.

  Czar

  I had the same problem with my P6-2371ea, so what I did adjust the screw until it touches, then tighten them, if it is not an option due to too much of a gap to take the front off the PC and put a match with adhesive tape double sided on the DVD button or something similar it has worked for me in the past

• Close button does not work

  I've updated to Windows 10, all good, then I updated to the latest version of Thunderbird Beta (40.0) (or so I think) and after I've updated if I remember correctly, he told me that that would cause my Silverlight plug-in to stop functioning properly due to be unsupported.

  After having said all that, the question is that none of the buttons on the top right of the working window. I can go out with Alt + F4 and File > Exit and Max with double click on which must close the application, but it doesn't. Everything else works correctly, as far as I am concerned except this.

  Thank you

  Aiox

  Too bad then, it did not work. Wonder what could be another way to solve this problem. Maybe it's a bug that is already present in their tracker?

  Hmm. interesting, it seems that by changing the false mail.tabs.drawInTitleBar in the fixed configuration editor. Maybe I should have tried that first. So bad, I don't remember so far. But no matter, the issue has been resolved, now it would be nice if it was not present on the future for future users versions since it could make their experience of Thunderbird to go awry.

  I thank you for your help Matt, have a nice day,

  Aiox

• CLOSE first button does not work, but the second is

  Hi, I'm working on a new web site using Flex 3, but I have a weird problem where I got no information yet on the issue. I opened a TitleWindow to display a full-size image where I want to show a close button at the top and bottom of the image, a close button (some images are very huge and it is the purpose of the TitleWindow). The close button in the button works fine, but one upstairs work not at all (but it appears correctly). What I tried to do was to create 2 HBox inside an HBox. The two HBox are called hbox1a and hbox1b. In the hbox1a, I put a tag that contains the title of the image. In the hbox1b, I put the close button. But the "close" button down is not inside an hbox, pay only the next component in the TitleWindow.
  
  If anyone can help me to understand why the first close the (top) button does not work, I appreciate to understand.
  
  Thanks for any help!
  

  Well! It is always good to be able to respond to ourselves, but it was fast! Maybe because to explain on this forum has been a good thing to clean the idea!

  In any case, I decided to create a new function to close the TitleWindow where I decided to pass the ID (name) of the TitleWindow instead of the event.currentTarget.parent and it works! So I think that I can reduce this to a single function and use my second function for the two close button.

• iPhone 5 home button does not work after ios 10

  My 5 Iphone Home button does not work after update final IOS version of 10.

  The home button works on the first push to wake the phone but it will not open the phone the second button.

  I activated the assist button, which does not work either. But what I discover is if I open device for assistance then touch and lock screen click on the button home will work once to open the phone. If I open any app I can't close it unless I go through the same routine.

  You attempted to restart your phone?

  You can do so by holding the sleep/wake button and the Home button simultaneously until the Apple logo appears

• Firefox automatically updated itself, would not add new bookmarks, then deleted all mine, will not always add new, now the back button does not work. I'm Livid.

  I think I'm on Firefox 13.0. He put itself as part of the update of my computer up to date (at least I guess that's what happened, because it has changed). I noticed yesterday that he would not favorite Web sites, but I thought it was just the website or bookmarks have been full-time or something. Today, I tried to remove a few bookmarks to make more, but they would not remove. I tried to register a new site, and it wouldn't work. I tried to close/exit firefox and re-opening of the program. While the program was closed, I installed the next set of updates on my computer. When I have opened firefox, all my favorites, and the tab menu (or what you call personal small bar on the actual tabs) were gone. I can't always favorite of new sites, so I can't even re-do all my favorites (and I got a lot, all of them arranged so it's a big loss and incredibly annoying). Then I realized that the back button does not work. And the cursor remains on the typing that I symbol, it does not change the arrow, when I click on a link.

  One possible cause is a problem with the places.sqlite file that stores the bookmarks and history.

  • http://KB.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
  • https://support.Mozilla.org/KB/bookmarks+not+saved#w_fix-the-bookmarks-file

  You can also try to repair the database of places with this extension:

  • https://addons.Mozilla.org/firefox/addon/places-maintenance/

• "back" button does not work and the home page does not display on startup

  My buttons next and previous no longer work. They show just gray and I cannot click on them.
  Also my home page does not appear when I launch firefox.
  I reinstalled firefox 4 and then I went back to firefox 3.6.16 and have the same problem in both versions.
  Don't know what to do anymore
  I just found out that when I opened a second window everything works well in the second window, but it still does not work in the first window.
  The same thing happens when I close both windows. The first window of my home page does not appear and the back button does not work, but the second window is operating normally. Including my home page.

  Try:

  • http://KB.mozillazine.org/Corrupt_localstore.RDF

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the Add-ons is the cause of the problem (switch to the DEFAULT theme: Tools > Modules > appearance/themes).

  • Makes no changes on the start safe mode window.

  See:

  • Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox

• Satellite A300 - 1GN PASGCE - LED light button does not work with Win 7

  I improve my laptop for windows 7 everything works fine but the touchpad multimedia light led power button does not work.
  Play, stop, next work earlier but not the light / off does not work.

  No idea why?

  Hello

  Maybe it's a question of s a Win 7.
  I mean that the software is not intended for Win 7 but only for Vista.

  But you should check if you can reconfigure this button again.
  In Toshiba Assist-> optimize, you can find the Support of Toshiba Button tool.
  This tool can be used for the new configuration of the control buttons.

  First click on the button that you want to reconfigure and target path you can then choose the path to the exe file that must be executed by pressing this button.

  As far as I know that the exe files are placed in the program files/Toshiba/TSB folder.

  You will find different applications and one of these applications control the light on/off.

• Satellite A300-15J: touch button does not work properly from standby

  Recently I bought this laptop, works great except one problem...

  There is touchbutton for LED switching power.
  When I close or put the laptop in sleep, this button does not work like that but activates or disables the sound.

  I'm using Vista, I wonder if there is any patch or something for this problem.
  Thank you

  Andrew

  Can you please tell me if that happen after the day before, or after using the hibernation mode too?

• ProBook 430 G2 - left trackpad button does not respond intermittently

  I have a brand new ProBook. G2 430 (SKU # G6W35EA #ABB) with Windows 8.1, completely up to date. I find that every 10-15 minutes, the left button on the trackpad becomes unresponsive. The trackpad still moving the mouse pointer and the right button will continue to operate, but the left button does not react. This takes several minutes, perhaps 3-4. Then the left button it will start again to work as if nothing had happened. Because the button back to work, I suspect it's more likely to be a problem with the driver software or the Windows 8.1.

  I have Synaptics TouchPad driver version 18.1.8.1, the current version of the driver.

  I have Windows 8.1 version 6.3.9600.

  I have the HP M74 Bios version 1.03 version (07/07/2014)

  Anyone have any ideas?

  I have a minor breakthrough! So, until now the best solution that we had found was close the lid and open it upwards and the button would start working again. Not very good when you are in the middle of something.

  The new workaround is to do a tap two fingers on the touchpad and that seems to work. I tried now on 3-4 laptops with 100% success!

  I don't know if it is a 'feature' that detects the Palm of your hand when you type or something. I have not found anything about this either on the driver (haven't looked very hard tbh).

• The scan button does not work on Windows XP Media Center edition 2005

  Name of the printer: hp psc 1350 all-in-one

  Hi, this is happened since I reinstalled the operating system with an OEM disc, removing all the hp stuff. I got a new OEM drive that comes from hp (I think... well hp stuff works now) but the scan button does not always work. The old record was kind broken.

  I don't mind, but it will be useful, if it could be repaired. Don't want to do something big, would rather just not fix that to do something does not.

  Note: Scanning works, but I have to look somewhere else (e.g. opening scan in the Panel)

  OK, that explains why the scan button does not work.

  The complete software is required for the scan button to work, it is not a feature of the base software.

  Be sure to follow the steps below in order to get is torted:

  1. Unplug the USB from the printer.
  2. On the start menu, enter the HP folder. and follow the link to uninstall to remove the current software.
  3. If you don't find it there, go into control panel > add or remove programs, and remove any software installed HP PSC 1300 series.
  4. Download and install the full feature below:
     http://ftp.HP.com/pub/softlib/software10/COL8901/MP-23606-3/gc_w01_ENU_NB.exe
  5. You will find the Director of HP under the HP software. If you have problems using it, make sure you install the following hotfix:
     http://ftp.HP.com/pub/softlib/software8/COL17377/OJ-46104-1/CIT207355-HPCOM-patch-V8.exe

  Kind regards

  Shlomi

• Previous button does not

  Hi all

  I am building an application that uses the full screen as my main screen.

  On any of the screens, the previous button does not work. It has no effect.

  In my view, that the PREVIOUS key should work by default only.

  I am using JRE 5.0.0 and tests on the simulator of 8310...

  I also observed that the onClose() on my full screen is called when I press the BACK button on the Simulator, but I don't know wat to do in the method.

  Thanks in advance...

  Well, I work with the following:

  MyFullScreen:

  public boolean onClose() {
        close();
        return true;
      }
  

  Thanks for the help simon_hain...

• I'm locked out of my iphone5 not connected to my wifi at home and my home button does not work, any ideas on how to fix?

  I'm locked out of my iphone5 not connected to my wifi at home and my home button does not work, any ideas on how to fix?

  < re-titled by host >

  Take it to an Apple Store for repair or replacement.

• My mute button does not work

  The button does not work everytime I try to put my phone on silent. I turn it down and it will automatically return to the sound, it activates again upward. What can I do?

  Hello Jackie101foever,

  Thank you for using communities Support from Apple!

  As I understand it, you can't silence your iPhone.  I have a suggestion that should help you with this.

  The first thing we want to do is to make sure that you have a current backup of everything on your iPhone.  If you follow this link, you will find instructions on how to make a backup:

  The backup of your iPhone, iPad and iPod touch

  If the silent button moves upward on its own, so you must do this checked by a service representative.  You can find the nearest one by looking here:

  Find locations

  If the button is stay down, but do not silence the iPhone then we want to restore all settings.

  Reset preference files resets all parameters that may be problems. This step will not delete your contacts, photos or personal information. It deletes all your preferences for Wi - Fi, Bluetooth, do not disturb, Notifications, general, sounds, brightness & wallpaper and privacy and removes your Touch ID & password.

  Do you this by clicking on settings > general > reset > reset all settings.

  Once you have done this, restart the iPhone and see if you are able to turn off the sound.

  Have a great day!