A80:it guard beep until I press F2, when turned on.

Similar Questions

• I won't be able to listen to music instead of that there will be an annoying noise resembles: 'TOOOOOOOOOOOOOOOOOOOOOOOOOOOT' until I press the mute.

  original title: sound problems

  whenever I have to listen to music or anything like that and my laptop speakers are on... I won't be able to listen to music instead of that there will be an annoying noise resembles: 'TOOOOOOOOOOOOOOOOOOOOOOOOOOOT' until I press the mute. But if I listen to music through headphones, I can hear perfectly but I also hear of my fingers typing on the keyboard and if there was someone I talk I'd listen to the echo and and if there was a TV on, the sound of the TV will be higher. I took it to a professional man to fix it and he did. But he continues to go on and on. Any help?

  Hi elionassar,

  ·         Did you do changes on the computer before the show?

  Follow the steps in the article.

  Tips for solving common audio problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems

  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

• Satellite P10 504: continuous beep when turned on

  My P10 504 beeps continuous shortly after it is turned on. It will stop beeping and will restart but return to the continuous beep. So he can start consists of hit the F2 and go into the BIOS and quit, then it start OK.

  I pressed the keys during startup to see if it could be sticky keys, but that has no effect.
  If I take the entire memory when you start it beeps to tell me that I have no recollection. If a bank is in the continuous beep back.

  One, then it tends to make Windows to automatically display the search tool and update constantly the screen except esc is hit.

  Any ideas or other tests to be done?

  Hello

  I don't know where the problem is, but maybe you should try to reinstall the BIOS.
  If this does not help, please contact the ASP in your country.

  Good bye

• tried to install a new copy of Windows XP Home. Everything is OK until the final phase, when the "blue-screen" appeared during the installation of the drivers.

  Installation of xp and blue screen of death

  Hello

  I recently formatted the partition boot and recovery of a laptop Medion2230, then merged the two partitions in a single NTFS partition.  Don't ask why, it's a long story.

  Then, tried to install a new copy of Windows XP Home.  Everything is OK until the final phase, when the "Blue Screen of death" appeared during the installation of the drivers. Restarted and installing XP as normal to repeat the first onboard staged and went to the "blue screen" at the same point as before.

  Using some diagnostic software, I reformatted the drive again, loaded XP set up and I had the same problem.

  Someone knows what to do?

  Thank you allionii123

  Now solved and pc with Windows XP home.

  Discovered a trick online, who said that at the beginning of XP installation, press F5, and this leads to a screen option - select 'standard pc' and continue with the installation of XP.

  (Again), formatted hard drive ran XP installation and followed above point.

  Worked the first time.

  Thank you very much for your advice.

  I think you can pressing F5 or F7...

  How to impose a layer of HAL during an upgrade or an installation of Windows XP

  Impose a HAL

  To prevent Windows XP to automatically determine the system HAL during the upgrade or installation of Windows XP, you can manually force in a system HAL. To impose an Abstraction Layer HAL during a upgrade or installation of Windows XP, follow these steps:

  1. During the phase in text mode of Setup, when you receive the message at the bottom of the screen, press F5:
     Press F6 if you need to install a third-party RAID or SCSI driver.

     Note If you press F7, the Standard PC HAL loads and the ACPI enforcement is bypassed.

  I would not need this except in the systems of many older and low end... :-(  After all, in the same article, for Standard PC they say: "the CPU can be a 386, 486, Pentium, Pentium II, or Pentium III '...

  Thanks for letting us know what you were doing.  Do you have all the necessary drivers after loading Windows XP?  I would not recommend using the default drivers for any hardware - always see what the manufacturer offers on their web page for each component of your system - card motherboard chipset, audio, video, network devices, etc.

• Until the latest update when the AutoComplete bar has been selected, he "went" no other by clicking. I must now click the refresh arrow. It won't work even with the return. How can I operate the old way easier?

  Until the latest update when the url I wanted in the address bar of AutoComplete has been selected, it "accompanies" no more further by clicking on. I must now click the refresh arrow. It won't work even with the return. How can I operate the old way easier?

  You can disable this extension in tools > Modules > Extensions and close and restart Firefox normally.

• After pressing F2 when I enter setup it resets date August 20, 2009 12:00 am one here it shows also the bios: video bios with a shadow: obscured. What is a problem for me?

  Hello

  I have a dell studio 1558 laptop, core i5, 7(home premium), 64-bit, 4 GB ram operating system windows, I bought it in 2010.Now I get a poblem when starting after each time that I stopped him. It shows a msg for installation or recovery and after pressing F2 when I enter setup it resets date August 20, 2009 12:00 am one here it shows also the bios: video bios with a shadow: obscured. What is a problem for me? and why the date changes it self with the precedent1 every time at startup? How solveb this problem?

  Original title: shady BIOS, video bios with a shadow

  You must reset the default BIOS and change the BIOS utility setup time. In most cases, it will solve this problem.

  More information about the BIOS: http://www.dell.com/support/troubleshooting/us/en/19/KCS/KcsArticles/ArticleView?docid=DSN_148562

  If this does not resolve the problem, I think that the main problem is the battery from motherboard or Ram problem.

  It is best if you go to the Dell service center and tell about this problem.

• I bought an Adobe CS6 to win and I used it until yesterday. Now when I open it is the testing of the CC.

  I bought an Adobe Creative Suite 6 victory and I used it until yesterday. Now, when I opened it seems: Creative Suite 6 Design Standard 29 days in the trial of Adobe CC. But we already have a serial number: removed serial number >.  What can I do?

  [Forum show moved to a more appropriate forum and shorten the title - Mod]

  Have you ever had a trial of any Cloud program?

  Cloud of reading resumes https://forums.adobe.com/thread/2089127 for ideas (see answer #1).

• Try to install purchased box.  Alls well until the last window when this message appears. INCONSISTENCY IN THE DATABASE OF THE INSTALLER. RESTART YOUR COMPUTER AND INSTALL IT AGAIN. Fact as stated several times and redisplays but same message?

  Try to install purchased box.  Alls well until the last window when this message appears. INCONSISTENCY IN THE DATABASE OF THE INSTALLER. RESTART YOUR COMPUTER AND INSTALL IT AGAIN. Fact as stated several times and redisplays but same message?

  Run the cleanup tool and manually delete the caps.db file.

  Important directories | Error postal codes of Mylenium

  Use the CC cleaning tool to resolve installation problems. CC, CS3 - CS6

  When you reinstall, make sure that you run with user privileges sufficient and external tools like virus scanners do not interfere. This is why you have the question in the first place.

  Mylenium

• I have several websites in Muse. Everything was fine until last night. When publishing to Business Catalyst I get a message, teling me the following: unknown authentication problem - shared unknown error: 80. What should do?

  I have several websites in Muse. Everything was fine until last night. When publishing to Business Catalyst I get a message, teling me the following: unknown authentication problem - shared unknown error: 80. What should do?

  Hello

  To resolve this problem, you will need to disconnect muse and connect again.

  Here are the steps to the disconnection of Muse:

  1. help > log out.

  2. Once signed on restart Muse (please sign using Adobe ID if she invites to connect)

  You should be all set.

  Concerning

  Vivek

• HP Compaq Dx 7300 open then guard beep 4 times and stop beep

  HP Compaq Dx 7300 does not open my pc guard then 4times and stop beep beep, I don't know what I will do now change the RAM and then nothing at all changes plss help newbie here T__T

  Do not ignore it please I need now.

• 15-P157SA HP: HP 15-P157SA guard beep randomly since bought there is a little more than 7 days.

  Hi all, I hope someone can help me with this problem that I have because technical support of curry have been so far no help for me either, and I'm at the point now where I have to request a refund if I can't fix it.

  As I set up my HP 15 - P157SA, I had these beeps randomly that I can't understand why I get them. I did a lot of things that have not worked, in any case, here's the list of things I've tried so far:

  (1) I went to the page of diagnosis hp (where you press f2 on start up) I conducted a test of component (suggested by technician) to see if there no beeps during this time to work if it's a hardware problem. I did a quick test, there is no beeps. I then ran a test expanded to an hour and a half, and during this time, autour laptop does not beep. The technician said that this meant it was unlikely to be a hardware problem causing the beeps and more likely to be a software problem.

  (2) I unplugged my power cable to see if it was the power cord making the beep, but unfortunately still a sound signal.

  (3) the next thing I tried was to keep the power supply cord plugged but removed the battery to see if it was a problem with the battery. Yet once, it did not help and the laptop kept randomly beep.

  (4) another suggestion of many of the technician I spoke was to unplug my usb mouse and try again with just the trackpad. I tried this and found that the laptop still beeps.

  (5) I did a search on the internet and found that other people have had this problem but it seems to be no solution to the problem, someone had replaced their laptop 5 times and each laptop had the same problem, I think it was replaced by a different model in the end. I found another brand of HP with the same problem and the proposed fix was to run quietHDD. I thought a lot! A fix! But alas, that doesn't work anymore, my laptop beeps still randomly home.

  (6) I tried my sound to see if the beep came from my speakers, even with cut sound beeps inhibition happens again which suggested that there was not a sound system related issue.

  There is one thing I want to mention. I love this laptop and I would like to avoid having to return it. I had no problem with the closures or any performance of my apps. The laptop on a set runs very smoothly despite the beeps. I just need to know if it's a fault because I don't want to go through the process to fix it later down the line, if it fails completely on me. I want to sort my 21 days so that if I have to I can go back and either get a refund or Exchange for another phone. The beep is random, may occur every few minutes, the beeps are short, they are not continuous and sometimes it can be 30 minutes before it happens again, sometimes that they are very common and appear to be a sound signal every few minutes. I also noticed that one or two times the beep seems to meet, two beeps short one after the other. It happened only a few times, usually it's just a short beep at the same time.

  I tried to add as much information as possible, I hope I could explain everything clearly for you and that I have not confused you! I am also very frustrated if I want to apologize if I have sudden air somehow.  I, in no way mean to take on anyone and will be very grateful if someone can help me solve this problem.

  @Lekki2020 ,

  Hello and thanks for the display on the HP support forum.  If you this have had less than 15 days and called technical support.  Take it back to the place you bought it for Exchange.

  If this is not the case, contact the technical support for repair options.

  Please contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number.

  http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  Have a nice day and thanks for posting.

• New folder in Windows Explorer is not visible until I press refresh

  Hello!

  If I create a new folder in Windows Explorer to a network drive (which is a DFS share) under Windows 7 Professional 32 bit, the new folder is not visible until I have press F5 (refresh). Is there a fix or a solution to this problem?

  Thank you

  Kampi

  Hi kampi,.

  You can wait for a while and do not try to rush by pressing f5, because it can take a while to showup on network drive.

  To work around the problem, you can try to disable the Client of Microsoft Networks in the LAN connection properties

  a. open management of network and sharing Center.

  b. go to the Local network connection and click Properties.

  c. clear the Client for Microsoft Networks option and check.

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Using Windows 7 Ultimate. I have a weird problem with mode 'sleep'. My keyboard blocking button on what ever I finally pressed and it will type until I press another button to cancel it.

  Hey upond, wake up the system from standby by pressing a key on the keyboard the key I press continue at the entrance. For example the system goes to sleep and I wake up with the G button and open internet explore and click on the address bar it goes GGGGGGGGGGGGG until I hit another key to cancel it. After doing this it behaves normally. I use a wireless keyboard and the keyboard and mouse using set im is the Kensington Ci70. I was wondering if anyone else encountered this minor annoyance.

  Your wireless keyboard is probably a driver issue. It would be easy enough to use the SHIFT key to wake up to a better driver is available for your system. I expect it to be an update of the BIOS, or a chipset (by ACPI) driver.

  Messages rating helps other users

  Mark L. Ferguson MS - MVP

• JDev11g - prevention of query for the table running until ExecWithParams press

  JDev 11 g ADF-Faces with task flow creation web app - test a single page.
  
  I have five variable bind I have installed with reference LOV to display the name return ID's, two are dates that work now! I have the ExecWithParams button, then on a table that uses a VO with a custom query with the dregs.
  
  I need links to be filled, but the page takes a while to load, and my guess is that the request for the table tries to run, but does not receive all the data since the lie is empty at the start. The query runs great once I have complete binding and press the ExecWithParams button.
  
  How can I stop the query in the table to run until the ExecWithParams button is pressed? I'm guessing that this is the problem since it takes several minutes when the link to the browser is launched and makes the page actually. All requests for links are very simple, while the request of VO is very complex. Or maybe something else wrong that I'm not getting?
  
  Thank you, Ken

  Something that I use occasionally is the substitution of the VO executeQuery method.

      public void executeQuery() {
          if (getWhereClause() == null){
              setWhereClause("1=2");
          }
          super.executeQuery();
      }
  

  It works for running dynamic bind variable.

  For your case, you could do something like...

      public void executeQuery() {
          if (getNamedWhereClauseParam("YOUR_BIND_VARIABLE") == null){
              setWhereClause("1=2");
          }
          super.executeQuery();
      }
  

• Where is "Hide underlined letters for Keyboard Navigation until I press the alt key.

  She's hiding the letters underlined by default.
  I want to show the letters highlighted for navigation with the keyboard by default.

  Salvation will be

  Open Control Panel / ease of access Center / make the keyboard easier to use.

  This option is located at the bottom of the window.

  Note access keys and keyboard shortcuts.
  
  I hope this helps.

  Thank you for using Windows 7 Ronnie Vernon MVP