AAA w/RSA: "any type of permission...". »
I've set up a router and a switch to AAA using a server RADIUS of RSA. Both are RSA 'Agent hosts' with identical configurations. Router (2621XM/EntServ Version 12.4 (18)) and switch (3560-24PS/IPBase - 12.2 (25) SEB2) have identical configs AAA, and RADIUS/RSA is very well regarding the access code will be accepted. But the switch won't let me:
**********************
User name:
Password: PASSWORD accepted % Failed authorization. ************************** When I do "deb radius authentication" on each, the outputs are the same until the last 2 lines. The router that works says: 000055.: Jan 16 12:22:51 CEST: RADIUS (00000005): receipt of id 1645/3 000056:. Jan 16 12:22:51 IS: RADIUS/DECODE: fragments of response Message, 19, total 19 bytes But the switch says: 000284: Jan 16 12:20:47 UTC: RADIUS: saved the authorization for user 3030220 to 3034440 data 000285: Jan 16 12:20:47 UTC: RADIUS: no type of permission for the user. The only other difference I can think of is that I use ssh for router and switch telent (IPBase apparently no habla "crypto", I could use another IOS I think.) Any clue? TIA Paul If I were you, I would like to 'disable' permission on the catalyst 3560. I n an identical Setup like yours on mine Catalyst 2960 and it works very well. See below: [[email protected] / * / root] # telnet 192.168.0.5 192.168.0.5 by train... Connected to 192.168.0.5 (192.168.0.5). [Escape character is ' ^]'. C ***************** User access audit Username: test4 Password: Enter your new PIN, containing 4-8 digit. or to cancel the procedure of the new PIN: Please re - enter new PIN code: Wait for the code on your card to change, and then sign in with the new PIN code Enter the PASSWORD: C2960 #sh worm Cisco IOS software, software C2960 (C2960-LANBASEK9-M), Version 12.2 (25) SEE4, RELEASE SOFTWARE (fc1) Copyright (c) 1986-2007 by Cisco Systems, Inc. Updated Tuesday 16 July 07 02:53 by myl Image text-base: 0 x 00003000, database: 0x00CC0000 ROM: Bootstrap program is C2960 boot loader BOOTLDR: C2960 Boot Loader (C2960-HBOOT-M) 12.2 (25r) the SEE1, release SOFTWARE (fc1) C2960 uptime is 2 weeks, 6 days, 14 hours, 10 minutes System to regain the power ROM System restarted at 23:20:30 GMT Wednesday, December 26, 2007 System image file is "flash: c2960-lanbasek9 - mz.122 - 25.SEE4.bin". This product contains cryptographic features and is under the United States States and local laws governing the import, export, transfer and use. Delivery of Cisco cryptographic products does not imply third party approval to import, export, distribute or use encryption. Importers, exporters, distributors and users are responsible for compliance with U.S. laws and local countries. By using this product you agree to comply with the regulations and laws in force. If you are unable to satisfy the United States and local laws, return the product. A summary of U.S. laws governing Cisco cryptographic products to: http://www.Cisco.com/WWL/export/crypto/tool/stqrg.html If you need assistance please contact us by mail at processor of WS-C2960G-24TC-L (PowerPC405) Cisco (revision B0) with 61440K / 4088K bytes of memory. Card processor ID FOC1036X0F1 Last reset of tension 2 virtual Ethernet interfaces 24 gigabit Ethernet interfaces Password recovery mechanism is activated. 64K bytes of memory simulated by flash not volatile configuration. Basic Ethernet MAC address: 00:19:55:1 B: D6:00 Number of the motherboard: 73-10015-05
Power supply part number: 341-0098-02 Motherboard serial number: FOC10352NF2 Power supply serial number: AZS103402ZF Revision number of the model: B0 Motherboard revision number: B0 Model number: WS-C2960G-24TC-L System serial number: FOC1036X0F1 Top Assembly part number: 800-26673-02 Top of page revision number of the Assembly: C0 Version ID: V02 CLEI Code number: COM3G00BRA Revision number of hardware consulting: 0x01 SW Version SW Image model switch ports ------ ----- ----- ---------- ---------- * 1 WS-C2960G-24TC-L 12.2 24 (25) SEE4 C2960-LANBASEK9-M Configuration register is 0xF C2960 #sh run | AAA Inc. AAA new-model AAA RADIUS local group authentication connection test
AAA authentication login test1 group Ganymede + local AAA authentication login notac local Group AAA dot1x default authentication RADIUS AAA - the id of the joint session C2960 #. CCIE Security Tags: Cisco Security My Weblogic 12 c StartWeblogic.cmd failed after that I configured the migration of the cluster to the database with the name of the table as none. I can't even to the Server Admin page. Before that, I remove the. log.lck, process.id, process.lck files in the nodemanager directory Help, please! Thank you! Joe **************************************************************************** # < October 1, 2015 4:18:20 PM CDT > < Info > < security > < NAP1D692 > <>< Home > <><><>< 1443734300986 > < BEA-090905 > < disable provider JCE CryptoJ self-intégrité for better startup performance. To allow this control, enter - Dweblogic.security.allowCryptoJDefaultJCEVerification = true. > # < October 1, 2015 4:18:21 PM CDT > < Info > < security > < NAP1D692 > <>< Home > <><><>< 1443734301049 > < BEA-090906 > < change the default Random Number Generator in RSA CryptoJ of ECDRBG128 to FIPS186PRNG. To disable this change, specify - Dweblogic.security.allowCryptoJDefaultPRNG = true. > # < October 1, 2015 4:18:21 PM CDT > < opinion > < WebLogicServer > < NAP1D692 > <>< Home > <><><>< 1443734301064 > < BEA-000395 > < the following extensions added at the end of the classpath directory content: C:\oracle\Middleware\Oracle_Home\user_projects\domains\joe12c_domain\lib\log4j-1.2.15.jar; C:\oracle\Middleware\Oracle_Home\user_projects\domains\joe12c_domain\lib\wllog4j.jar. > # < October 1, 2015 4:18:21 PM CDT > < Info > < WebLogicServer > < NAP1D692 > <>< Thread-4 > <><><>< 1443734301361 > < BEA-000377 > < since Java hotspot 64-bit Server VM WebLogic Server Version 24.60 - b09 of Oracle Corporation. > # < October 1, 2015 4:18:21 PM CDT > < Info > < management > < NAP1D692 > <>< Thread-5 > <><><>< 1443734301610 > < BEA-141107 > < Version: WebLogic Server 12.1.3.0.0 Wed May 21 18:53:34 PDT 2014 1604337 > # < October 1, 2015 4:18:22 PM CDT > < opinion > < WebLogicServer > < NAP1D692 > <>< Thread-6 > <><><>< 1443734302702 > < BEA-000365 > < Server State has changed at the START. > # < October 1, 2015 4:18:22 PM CDT > < Info > < WorkManager > < NAP1D692 > <>< Thread-6 > <><><>< 1443734302702 > < BEA-002900 > < init > self-adjustable thread pool. # < October 1, 2015 4:18:22 PM CDT > < Info > < WorkManager > < NAP1D692 > <>< ExecuteThread [ASSET]: '0' for the queue: "(self-adjusting) weblogic.kernel.Default" > <><><>< 1443734302733 > < BEA-002942 > < CMM level memory becomes 0. Sleep thread pool to 256. > # < October 1, 2015 4:18:22 PM CDT > < Info > < WebLogicServer > < NAP1D692 > <>< Thread-6 > <><><>< 1443734302733 > < BEA-000214 > < WebLogic Server "AdminServer" version: WebLogic Server 12.1.3.0.0 Wed May 21 18:53:34 PDT 2014 1604337 Copyright (c) 1995,2014, Oracle and/or its affiliates. All rights reserved. > # < October 1, 2015 4:18:23 PM CDT > < Info > < Server > < NAP1D692 > <>< Thread-6 > <><><>< 1443734303264 > < BEA-002622 > < Protocol 't3' is now configured. > # < October 1, 2015 4:18:23 PM CDT > < Info > < Server > < NAP1D692 > <>< Thread-6 > <><><>< 1443734303264 > < BEA-002622 > < Protocol "t3s" is now configured. > # < October 1, 2015 4:18:23 PM CDT > < Info > < Server > < NAP1D692 > <>< Thread-6 > <><><>< 1443734303264 > < BEA-002622 > < the 'http' Protocol is now configured. > # < October 1, 2015 4:18:23 PM CDT > < Info > < Server > < NAP1D692 > <>< Thread-6 > <><><>< 1443734303264 > < BEA-002622 > < the "https" Protocol is now configured. > # < October 1, 2015 4:18:23 PM CDT > < Info > < Server > < NAP1D692 > <>< Thread-6 > <><><>< 1443734303264 > < BEA-002622 > < Protocol "iiop" is now configured. > # < October 1, 2015 4:18:23 PM CDT > < Info > < Server > < NAP1D692 > <>< Thread-6 > <><><>< 1443734303264 > < BEA-002622 > < Protocol 'iiops' is now configured. > # < October 1, 2015 4:18:23 PM CDT > < Info > < Server > < NAP1D692 > <>< Thread-6 > <><><>< 1443734303264 > < BEA-002622 > < "ldap" Protocol is now configured. > # < October 1, 2015 4:18:23 PM CDT > < Info > < Server > < NAP1D692 > <>< Thread-6 > <><><>< 1443734303264 > < BEA-002622 > < Protocol "ldaps" is now set up. > # < October 1, 2015 4:18:23 PM CDT > < Info > < Server > < NAP1D692 > <>< Thread-6 > <><><>< 1443734303264 > < BEA-002622 > < Protocol "cluster" is now configured. > # < October 1, 2015 4:18:23 PM CDT > < Info > < Server > < NAP1D692 > <>< Thread-6 > <><><>< 1443734303264 > < BEA-002622 > < Protocol 'clusters' is now configured. > # < October 1, 2015 4:18:23 PM CDT > < Info > < Server > < NAP1D692 > <>< Thread-6 > <><><>< 1443734303264 > < BEA-002622 > < the "SNMP" is now configured. > # < October 1, 2015 4:18:23 PM CDT > < Info > < Server > < NAP1D692 > <>< Thread-6 > <><><>< 1443734303264 > < BEA-002622 > < Protocol "admin" is now configured. > # < October 1, 2015 4:18:23 PM CDT > < Info > < Server > < NAP1D692 > <>< Thread-6 > <><><>< 1443734303264 > < BEA-002624 > < administration Protocol is "t3s" and is now configured. > # < October 1, 2015 4:18:23 PM CDT > < Info > < RJVM > < NAP1D692 > <>< Thread-5 > <><><>< 1443734303264 > < BEA-000570 > < Network Configuration for channel "AdminServer. Listening address: 7001 Address public n/a True active http Tunneling Enabled false Outgoing Enabled false Admin traffic enabled true fake license to ResolveDNSName > # < October 1, 2015 4:18:23 PM CDT > < Debug > < RJVM > < NAP1D692 > <>< Thread-5 > <><><>< 1443734303264 > < BEA-000571 > < retail network for channel "AdminServer. Weight of the channel 50 Accept the rear 300 Timeout 5000ms Message Max Size 10000000 Timeout message 60 years Timeout of 65 Tunneling Timeout 40 s Tunneling Ping 45 s > # < October 1, 2015 4:18:23 PM CDT > < Info > < Server > < NAP1D692 > <>< Thread-5 > <><><>< 1443734303279 > < BEA-002609 > < channel Service initialized. > # < October 1, 2015 4:18:23 PM CDT > < opinion > < Log Management > < NAP1D692 > <>< ExecuteThread [pending]: '1' for the queue: "(self-adjusting) weblogic.kernel.Default" > <><><>< 1443734303357 > < BEA-170019 > < C:\oracle\Middleware\Oracle_Home\user_projects\domains\joe12c_domain\servers\AdminServer\logs\AdminServer.log server log file is opened. All events in the log server-side will be written to this file. > # < October 1, 2015 4:18:23 PM CDT > < Info > < Log Management > < NAP1D692 > <>< ExecuteThread [pending]: '1' for the queue: "(self-adjusting) weblogic.kernel.Default" > <><><>< 1443734303404 > < BEA-170023 > < logging of the server is initialized with the Java application logging API. > # < October 1, 2015 4:18:23 PM CDT > < Info > < IIOP > < NAP1D692 > <>< [STANDBY] ExecuteThread: '2' for the queue: "(self-adjusting) weblogic.kernel.Default" > <><><>< 1443734303404 > < BEA-002014 > < subsystem enabled IIOP. > # < October 1, 2015 4:18:23 PM CDT > < Info > < Log Management > < NAP1D692 > < AdminServer > < [pending] ExecuteThread: '1' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734303404 > < BEA-170025 > < initialized Logging area. Events in the field log will be written to C:\oracle\Middleware\Oracle_Home\user_projects\domains\joe12c_domain\servers\AdminServer\logs/joe12c_domain.log. > # < October 1, 2015 4:18:23 PM CDT > < Info > < Diagnostics > < NAP1D692 > < AdminServer > < [pending] ExecuteThread: '1' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734303451 > < BEA-320001 > < ServerDebug The service initialized successfully. > # < October 1, 2015 4:18:23 PM CDT > < Info > < Store > < NAP1D692 > < AdminServer > < [pending] ExecuteThread: '1' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734303513 > < BEA-280008 > < open the persistent store of file 'WLS_DIAGNOSTICS' for recovery: directory = C:\oracle\Middleware\Oracle_Home\user_projects\domains\joe12c_domain\servers\AdminServer\data\store\diagnostics requestedWritePolicy = "Disabled" fileLockingEnabled = true driver = "wlfileio3." > # < October 1, 2015 4:18:23 PM CDT > < Info > < Store > < NAP1D692 > < AdminServer > < [pending] ExecuteThread: '1' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734303529 > < BEA-280103 > < storage of persistent files "WLS_DIAGNOSTICS" puts in cache in weblogic.store.io.file.direct.FileMapping [granularity = 65536 io mapped =]. > # < October 1, 2015 4:18:23 PM CDT > < Info > < management > < NAP1D692 > < AdminServer > < [pending] ExecuteThread: '2' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734303529 > < BEA-141278 > < Java configuration entropy is: property system "java.security.egd = null; File JRE java.security "securerandom.source = file:/dev/urandom" property Blocking of the Config = false; Version of the JDK = 1.7.0_60; Operating system = Windows 7. > # < October 1, 2015 4:18:23 PM CDT > < Info > < management > < NAP1D692 > < AdminServer > < [pending] ExecuteThread: '2' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734303545 > < BEA-141280 > < configuration detected NON-BLOCKING of entropy of java. This setting you will give the best performance on machines with limited sources of entropy, but is less secure than a blocking entropy configuration. > # < October 1, 2015 4:18:23 PM CDT > < Info > < management > < NAP1D692 > < AdminServer > < [pending] ExecuteThread: '2' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734303545 > < BEA-141187 > < Java System properties are defined as follows: awt. Toolkit = sun.awt.windows.WToolkit leader. Encoding = Cp1252 leader. Encoding.pkg = sun.io leader. Separator =. Java.awt.graphicsenv = sun.awt.Win32GraphicsEnvironment Java.awt.PrinterJob = sun.awt.windows.WPrinterJob Java.class.Path = C:\JDK17~1.0_6\lib\tools.jar; C:\oracle\MIDDLE~1\ORACLE~1\wlserver\server\lib\weblogic_sp.jar; C:\oracle\MIDDLE~1\ORACLE~1\wlserver\server\lib\weblogic.jar; C:\oracle\MIDDLE~1\ORACLE~1\oracle_common\modules\net. SF.antcontrib_1.1.0.0_1-0b3\lib\ant-contrib.jar; C:\oracle\MIDDLE~1\ORACLE~1\wlserver\modules\features\oracle.WLS.common.nodemanager_2.0.0.0.jar; C:\oracle\MIDDLE~1\ORACLE~1\oracle_common\modules\com. Oracle.Cie.config - WLS - online_8.1.0.0.jar; C:\oracle\MIDDLE~1\ORACLE~1\wlserver\common\derby\lib\derbyclient.jar; C:\oracle\MIDDLE~1\ORACLE~1\wlserver\common\derby\lib\derby.jar; C:\oracle\MIDDLE~1\ORACLE~1\wlserver\server\lib\xqrl.jar; C:\oracle\MIDDLE~1\ORACLE~1\wlserver\server\lib\weblogic.jar; C:\Progra~2\IBM\RATION~1\CLEARQ~1\cqjni.jar Java.class.version = 51.0 Java.endorsed.dirs = C:\JDK17~1.0_6\jre\lib\endorsed; C:\oracle\MIDDLE~1\ORACLE~1\oracle_common\modules\endorsed Java.ext.dirs = C:\JDK17~1.0_6\jre\lib\ext; C:\Windows\Sun\Java\lib\ext Java.Home = C:\JDK17~1.0_6\jre Java.IO.TMPDIR = Java.Library.Path = C:\JDK17~1.0_6\bin; C:\Windows\Sun\Java\bin; C:\Windows\System32; C:\Windows; C:\oracle\MIDDLE~1\ORACLE~1\wlserver\server\native\win\x64; C:\oracle\MIDDLE~1\ORACLE~1\wlserver\server\bin; C:\oracle\MIDDLE~1\ORACLE~1\oracle_common\modules\org. Apache.ant_1.9.2\bin; C:\JDK17~1.0_6\jre\bin; C:\JDK17~1.0_6\bin; C:\Progra~2\IBM\RATION~1\common; C:\Progra~3\Oracle\Java\javapath; C:\oracle\product\102~1.0\client_1\BIN; C:\Progra~2\BUSINE~1\Common\3.5\bin\NOTES\; C:\Windows\System32; C:\Windows; C:\Windows\System32\wbem; C:\Windows\System32\WINDOW~1\v1.0\; C:\Progra~2\HEAT\;\\nap-lvip-047\scmref\bin; C:\JDK17~1.0_5;\\nap-lvip-047\maven\M3R1SW~N.9\bin; C:\Progra~2\CODECO~1;\\nap-lvip-047\scmref\bin; C:\Windows\System32; C:\Progra~2\IBM\gsk8\lib; C:\Progra~2\IBM\gsk8\bin; C:\Progra~2\IBM\RATION~1\CLEARC~1\Bin; C:\Progra~2\IBM\RATION~1\CLEARC~1\REMOTE~1\cteapis; C:\oracle\MIDDLE~1\ORACLE~1\wlserver\server\native\win\x64\oci920_8;. Java.naming.Factory.initial = weblogic.jndi.WLInitialContextFactory Java.naming.Factory.URL.pkgs = weblogic.jndi.factories:weblogic.corba.j2ee.naming.url:weblogic.jndi.factories:weblogic.corba.j2ee.naming.url Java.Runtime.Name = Java (TM) SE Runtime Environment Java.Runtime.version = 1.7.0_60 - b19 Java.Security.Policy = C:\oracle\MIDDLE~1\ORACLE~1\wlserver\server\lib\weblogic.policy Java.Specification.Name = Java Platform API Specification Java.Specification.Vendor = Oracle Corporation Java.Specification.version = 1.7 Java.Vendor = Oracle Corporation Java.vendor.URL = http://Java.Oracle.com/ Java.vendor.URL.bug = http://bugreport.Sun.com/bugreport/ Java.version = 1.7.0_60 Java.VM.info = mixed mode Java.VM.Name = VM Server Java hotspot 64-Bit Java.VM.Specification.Name = specification of Machine Java virtual Java.VM.Specification.Vendor = Oracle Corporation Java.VM.Specification.version = 1.7 Java.VM.Vendor = Oracle Corporation Java.VM.version = 24, 60 - b09 javax. Management.Builder.initial = weblogic.management.jmx.mbeanserver.WLSMBeanServerBuilder javax.rmi.CORBA.PortableRemoteObjectClass = weblogic.iiop.PortableRemoteObjectDelegateImpl javax.rmi.CORBA.UtilClass = weblogic.iiop.UtilDelegateImpl org.omg.CORBA.ORBClass = weblogic.corba.orb.ORB org.omg.CORBA.ORBSingletonClass = weblogic.corba.orb.ORB OS. Arch = amd64 OS. Name = Windows 7 OS.version = 6.1 Path.Separator =; Sun.Arch.Data.Model = 64 Sun.Boot.class.Path = C:\oracle\MIDDLE~1\ORACLE~1\oracle_common\modules\endorsed\javax-xml-bind.jar; C:\oracle\MIDDLE~1\ORACLE~1\oracle_common\modules\endorsed\javax-XML-WS.jar; C:\oracle\MIDDLE~1\ORACLE~1\oracle_common\modules\endorsed\jsr250-API.jar; C:\JDK17~1.0_6\jre\lib\resources.jar; C:\JDK17~1.0_6\jre\lib\rt.jar; C:\JDK17~1.0_6\jre\lib\sunrsasign.jar; C:\JDK17~1.0_6\jre\lib\jsse.jar; C:\JDK17~1.0_6\jre\lib\jce.jar; C:\JDK17~1.0_6\jre\lib\charsets.jar; C:\JDK17~1.0_6\jre\lib\jfr.jar; C:\JDK17~1.0_6\jre\classes Sun.Boot.Library.Path = C:\JDK17~1.0_6\jre\bin Sun.CPU.endian = little Sun.CPU.isalist = amd64 Sun.Desktop = windows Sun.IO.Unicode.Encoding = UnicodeLittle Sun.java.Command = weblogic. Server Sun.java.Launcher = SUN_STANDARD Sun.JNU.Encoding = Cp1252 Sun.Management.Compiler = HotSpot 64 bits compilers Tiered Sun.OS.patch.Level = Service Pack 1 User.country = en User.dir = C:\oracle\Middleware\Oracle_Home\user_projects\domains\joe12c_domain User.Home = User.language = en User.Name = User.TimeZone = VDE. Home = C:\oracle\Middleware\Oracle_Home\user_projects\domains\joe12c_domain\servers\AdminServer\data\ldap WebLogic. Name = AdminServer WebLogic.Home = C:\oracle\MIDDLE~1\ORACLE~1\wlserver\server WLS. Home = C:\oracle\MIDDLE~1\ORACLE~1\wlserver\server . > # < October 1, 2015 4:18:23 PM CDT > < Info > < Store > < NAP1D692 > < AdminServer > < [pending] ExecuteThread: '1' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734303545 > < BEA-280009 > < storing files persistent "WLS_DIAGNOSTICS" (75765a60-c009-403f-a7ed-c6a75a86e1c8) has been opened: blockSize = 512 actualWritePolicy = "Disabled(single-handle-non-direct)" explicitIOEnforced = false files = 25. " > # < October 1, 2015 4:18:23 PM CDT > < Info > < XML > < NAP1D692 > < AdminServer > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734303592 > < BEA-130036 > < XMLRegistry initialization > # < October 1, 2015 4:18:23 PM CDT > < Info > < Socket > < NAP1D692 > < AdminServer > < [pending] ExecuteThread: '2' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734303662 > < BEA-000436 > < allocate 4 player son. > # < October 1, 2015 4:18:23 PM CDT > < Info > < Socket > < NAP1D692 > < AdminServer > < [pending] ExecuteThread: '2' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734303662 > < BEA-000446 > < active native to IO. > # < October 1, 2015 4:18:23 PM CDT > < Info > < security > < NAP1D692 > < AdminServer > < ExecuteThread [pending]: '3' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734303849 > < BEA-000000 > < OpenJPA starting 1.1.1 - SNAPSHOT > # < October 1, 2015 4:18:24 PM CDT > < Info > < security > < NAP1D692 > < AdminServer > < ExecuteThread [pending]: '3' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304005 > < BEA-000000 > < StoreServiceImpl.initJDO - StoreService is initialized with Id = ldap_PyMqKeZifftJZ2SHXoWLnh4Ldn4 = > # < October 1, 2015 4:18:24 PM CDT > < Info > < security > < NAP1D692 > < AdminServer > < ExecuteThread [pending]: '3' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304021 > < BEA-090516 > < authenticator provider has already given LDAP. > # < October 1, 2015 4:18:24 PM CDT > < Info > < security > < NAP1D692 > < AdminServer > < ExecuteThread [pending]: '3' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304114 > < BEA-090516 > < provider authorized person a pre-existing LDAP data. > # < October 1, 2015 4:18:24 PM CDT > < Info > < security > < NAP1D692 > < AdminServer > < ExecuteThread [pending]: '3' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304301 > < BEA-090516 > < CredentialMapper a pre-existing LDAP provider data. > # < October 1, 2015 4:18:24 PM CDT > < Info > < security > < NAP1D692 > < AdminServer > < ExecuteThread [pending]: '3' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304317 > < BEA-090516 > < RoleMapper a pre-existing LDAP provider data. > # < October 1, 2015 4:18:24 PM CDT > < Info > < security > < NAP1D692 > < AdminServer > < ExecuteThread [pending]: '3' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304379 > < BEA-090093 > < no pre - WLS 8.1 Keystore provider is configured for server security realm myrealm AdminServer. > # < October 1, 2015 4:18:24 PM CDT > < opinion > < security > < NAP1D692 > < AdminServer > < ExecuteThread [pending]: '3' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304379 > < BEA-090082 > < security initialization using security realm myrealm. > # < October 1, 2015 4:18:24 PM CDT > < Info > < connector > < NAP1D692 > < AdminServer > < [pending] ExecuteThread: '1' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304457 > < BEA-190000 > < J2EE Connector Service initialization. > # < October 1, 2015 4:18:24 PM CDT > < Info > < connector > < NAP1D692 > < AdminServer > < [pending] ExecuteThread: '1' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304457 > < BEA-190001 > < Service connector J2EE initialized successfully. > # < October 1, 2015 4:18:24 PM CDT > < Info > < Store > < NAP1D692 > < AdminServer > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304473 > < BEA-280008 > < opening persistent store file '_WLS_AdminServer' for recovery: directory = C:\oracle\Middleware\Oracle_Home\user_projects\domains\joe12c_domain\servers\AdminServer\data\store\default requestedWritePolicy = fileLockingEnabled 'Direct entry' = true driver = "wlfileio3." > # < October 1, 2015 4:18:24 PM CDT > < Info > < JMX > < NAP1D692 > < AdminServer > < [pending] ExecuteThread: '2' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304504 > < BEA-149512 > < JMX connector server started service: jmx:iiop://10.29.11.182:7001/jndi/weblogic.management.mbeanservers.runtime. > # < October 1, 2015 4:18:24 PM CDT > < Info > < JMS > < NAP1D692 > < AdminServer > < ExecuteThread [pending]: '3' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304535 > < BEA-040305 > < JMS service is initialized and standby mode. > # < October 1, 2015 4:18:24 PM CDT > < Info > < JMS > < NAP1D692 > < AdminServer > < ExecuteThread [pending]: '3' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304567 > < BEA-040090 > < 8 deployed by default connection factories. > # < October 1, 2015 4:18:24 PM CDT > < Info > < JMS > < NAP1D692 > < AdminServer > < ExecuteThread [pending]: '3' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304567 > < BEA-040407 > < connection factory default 'DefaultXAConnectionFactory2' with 'weblogic.jms.XAConnectionFactory2' JNDI name is started >. # < October 1, 2015 4:18:24 PM CDT > < Info > < JMS > < NAP1D692 > < AdminServer > < ExecuteThread [pending]: '3' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304567 > < BEA-040407 > < connection factory default 'MessageDrivenBeanConnectionFactory' with 'weblogic.jms.MessageDrivenBeanConnectionFactory' JNDI name is started >. # < October 1, 2015 4:18:24 PM CDT > < Info > < JMS > < NAP1D692 > < AdminServer > < ExecuteThread [pending]: '3' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304567 > < BEA-040407 > < connection factory default 'DefaultConnectionFactory' with 'weblogic.jms.ConnectionFactory' JNDI name is started >. # < October 1, 2015 4:18:24 PM CDT > < Info > < JMS > < NAP1D692 > < AdminServer > < ExecuteThread [pending]: '3' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304567 > < BEA-040407 > < connection factory default 'TopicConnectionFactory' with his "javax.jms.TopicConnectionFactory" JNDI name is started >. # < October 1, 2015 4:18:24 PM CDT > < Info > < JMS > < NAP1D692 > < AdminServer > < ExecuteThread [pending]: '3' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304567 > < BEA-040407 > < connection factory default 'DefaultXAConnectionFactory' with 'weblogic.jms.XAConnectionFactory' JNDI name is started >. # < October 1, 2015 4:18:24 PM CDT > < Info > < JMS > < NAP1D692 > < AdminServer > < ExecuteThread [pending]: '3' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304567 > < BEA-040407 > < connection factory default 'DefaultXAConnectionFactory0' with 'weblogic.jms.XAConnectionFactory0' JNDI name is started >. # < October 1, 2015 4:18:24 PM CDT > < Info > < JMS > < NAP1D692 > < AdminServer > < ExecuteThread [pending]: '3' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304567 > < BEA-040407 > < default connection factory is started 'Factory' with his "javax.jms.QueueConnectionFactory" JNDI name >. # < October 1, 2015 4:18:24 PM CDT > < Info > < JMS > < NAP1D692 > < AdminServer > < ExecuteThread [pending]: '3' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304567 > < BEA-040407 > < connection factory default 'DefaultXAConnectionFactory1' with 'weblogic.jms.XAConnectionFactory1' JNDI name is started >. # < October 1, 2015 4:18:24 PM CDT > < Info > < JMS > < NAP1D692 > < AdminServer > < ExecuteThread [pending]: '3' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304567 > < BEA-040306 > < JMS service is now active. > # < October 1, 2015 4:18:24 PM CDT > < Info > < JMX > < NAP1D692 > < AdminServer > < ExecuteThread [pending]: '3' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304629 > < BEA-149512 > < JMX connector server started service: jmx:iiop://10.29.11.182:7001/jndi/weblogic.management.mbeanservers.domainruntime. > # < October 1, 2015 4:18:24 PM CDT > < Info > < Store > < NAP1D692 > < AdminServer > < ExecuteThread [ASSETS]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304676 > < BEA-280009 > < file persistent store "_WLS_AdminServer" (c54c7ab9-2eab-4095-ba3c-5abb38f06231) has been opened: blockSize = 512 actualWritePolicy = "Direct-Write(read-buffered)" explicitIOEnforced = false documents = 21. " > # < October 1, 2015 4:18:24 PM CDT > < Info > < JMX > < NAP1D692 > < AdminServer > < ExecuteThread [pending]: '3' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304691 > < BEA-149512 > < JMX connector server started service: jmx:iiop://10.29.11.182:7001/jndi/weblogic.management.mbeanservers.edit. > # < October 1, 2015 4:18:24 PM CDT > < Info > < JDBC > < NAP1D692 > < AdminServer > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304769 > < BEA-001135 > < init > the JDBC service. # < October 1, 2015 4:18:24 PM CDT > < Info > < JDBC > < NAP1D692 > < AdminServer > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304785 > < BEA-001137 > < full initialization >. # < October 1, 2015 4:18:24 PM CDT > < Info > < JDBC > < NAP1D692 > < AdminServer > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304785 > < BEA-001138 > < Recovery > JDBC service. # < October 1, 2015 4:18:24 PM CDT > < Info > < JDBC > < NAP1D692 > < AdminServer > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304785 > < BEA-001140 > < complete resume >. # < October 1, 2015 4:18:24 PM CDT > < Info > < messaging.interception > < NAP1D692 > < AdminServer > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304816 > < BEA-400000 > < initialization message interception service. > # < October 1, 2015 4:18:24 PM CDT > < Info > < Server > < NAP1D692 > < AdminServer > < ExecuteThread [pending]: '3' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304863 > < BEA-002622 > < Protocol "[https, t3, snmp, cluster-broadcast-secure, ldaps, cluster-broadcast, ldap, http, iiop, admin, t3s '. "[, iiops]" is now set up. > # < October 1, 2015 4:18:24 PM CDT > < Info > < HTTP > < NAP1D692 > < AdminServer > < [pending] ExecuteThread: '1' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304863 > < BEA-101128 > < HTTP initialization services. > # < October 1, 2015 4:18:24 PM CDT > < Info > < HTTP > < NAP1D692 > < AdminServer > < [pending] ExecuteThread: '1' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304894 > < BEA-101135 > < AdminServer is the default Web server. > # < October 1, 2015 4:18:24 PM CDT > < Info > < HTTP > < NAP1D692 > < AdminServer > < [pending] ExecuteThread: '1' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304894 > < BEA-101052 > < [HttpServer (defaultWebserver) name: AdminServer] Initialized > # < October 1, 2015 4:18:24 PM CDT > < Info > < HTTP > < NAP1D692 > < AdminServer > < [pending] ExecuteThread: '1' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304894 > < BEA-101129 > < init > the container of the Web application. # < October 1, 2015 4:18:24 PM CDT > < Info > < JMX > < NAP1D692 > < AdminServer > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304972 > < BEA-149513 > < JMX Connector Server stopped serving: jmx:iiop://10.29.11.182:7001/jndi/weblogic.management.mbeanservers.edit. > # < October 1, 2015 4:18:24 PM CDT > < Info > < JDBC > < NAP1D692 > < AdminServer > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304988 > < BEA-001144 > < Force suspending the JDBC service. > # < October 1, 2015 4:18:24 PM CDT > < Info > < JDBC > < NAP1D692 > < AdminServer > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304988 > < BEA-001146 > < Force suspend completed JDBC service >. # < October 1, 2015 4:18:24 PM CDT > < Info > < JDBC > < NAP1D692 > < AdminServer > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304988 > < BEA-001147 > < JDBC service stop. > # < October 1, 2015 4:18:24 PM CDT > < Info > < JDBC > < NAP1D692 > < AdminServer > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304988 > < BEA-001149 > < stopping the JDBC service performed. > # < October 1, 2015 4:18:24 PM CDT > < Info > < JMX > < NAP1D692 > < AdminServer > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304988 > < BEA-149513 > < JMX Connector Server stopped serving: jmx:iiop://10.29.11.182:7001/jndi/weblogic.management.mbeanservers.domainruntime. > # < October 1, 2015 4:18:24 PM CDT > < Info > < MessagingBridge > < NAP1D692 > < AdminServer > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304988 > < BEA-200001 > < messaging bridge has shut down successfully. > # < October 1, 2015 4:18:24 PM CDT > < Info > < JMS > < NAP1D692 > < AdminServer > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304988 > < BEA-040308 > < service JMS suspends >. # < October 1, 2015 4:18:24 PM CDT > < Info > < JMS > < NAP1D692 > < AdminServer > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304988 > < BEA-040107 > < 8 cancelled by default connection factories. > # < October 1, 2015 4:18:24 PM CDT > < Info > < JMS > < NAP1D692 > < AdminServer > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304988 > < BEA-040015 > < stop JMS is done >. # < October 1, 2015 4:18:24 PM CDT > < Info > < JMX > < NAP1D692 > < AdminServer > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734304988 > < BEA-149513 > < JMX Connector Server stopped serving: jmx:iiop://10.29.11.182:7001/jndi/weblogic.management.mbeanservers.runtime. > # < October 1, 2015 4:18:24 PM CDT > < critical > < WebLogicServer > < NAP1D692 > < AdminServer > < principal > < < WLS Kernel > > <><>< 1443734304988 > < BEA-000362 > <Server has failed. Reason: at least a migratable target is configured with automatic migration. Before the automatic migration of any type can be used, the MigrationBasis must be defined in the ClusterMBean. If database is chosen, must be set so DataSourceForAutomaticMigration. > # < October 1, 2015 4:18:25 PM CDT > < opinion > < WebLogicServer > < NAP1D692 > < AdminServer > < principal > < < WLS Kernel > > <><>< 1443734305003 > < BEA-000365 > < Server state changed to FAILED. > # < October 1, 2015 4:18:25 PM CDT > < error > < WebLogicServer > < NAP1D692 > < AdminServer > < principal > < < WLS Kernel > > <><>< 1443734305003 > < BEA-000383 > < is not an essential service. The server shuts itself down. > # < October 1, 2015 4:18:25 PM CDT > < opinion > < WebLogicServer > < NAP1D692 > < AdminServer > < principal > < < WLS Kernel > > <><>< 1443734305003 > < BEA-000365 > < Server state has changed to FORCE_SHUTTING_DOWN. > # < October 1, 2015 4:18:25 PM CDT > < Info > < WebLogicServer > < NAP1D692 > < AdminServer > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1443734305003 > < BEA-000236 > < stop run > discussions. # < October 1, 2015 4:18:25 PM CDT > < Info > < WebLogicServer > < NAP1D692 > < AdminServer > < principal > < < WLS Kernel > > <><>< 1443734305003 > < BEA-000238 > < judgment made. > It may sound crazy that I am answering my own post. As he complains about MigrationBasis. I tried to go to the config.xml file and changed
TO
And at least I was able to restart Server Admin and go to the Server Admin page. The Cluster-> Configuration-> Migration is always on view from database as the basis for Migration. Joe My superdrive drive don't bed not any type of disc, once I insert it in the drive Hi all My end 2011 edition iMac doesn't read any type of disc if I insert it in the drive. It automatically rejects the disk after one a wile and then the disc pushes. It allows me not even read the disc. What could be the problem? Thank you The drive could be faulty, but maybe it's nothing more that a lens is dirty. Lens cleaning products are inexpensive and should give it a shot. Equium A60-199 is not play or recognize any type of cd or dvd Hi all It's the first time I was in the unfortunate duty position post one problem-normally I can find a solution here and just fix it myself! I also tried the suggestion of microsoft to change IDE transfer parameters, and that no longer works. When I put a disk in it turns three times and the light on the cd drive flashes, but he can't find anything, and I get the message ' d: / is not accessible. the request could not be performed because of an i/o error "I also websearched that but found nothing else than the suggestions above that has not worked." Is it possible that the link between the motherboard and cd rom to be broken yet light and spinning cd happen? I am completely confused and would like to have suggestions from anyone! Thanks in advance, Hello Don't reset the system how you used recovery media to set to factory settings? If so, I think that there must be a hardware malfunction. The drive has power and I think that the problem is not connection but damaged drive. The drive is original and also compatible with this unit. The assignment of pins is just. Before trying anything, you can try to remove the disc and check the contacts. Maybe they should be cleaned. If nothing helps, I presume that the replacement should be performed. Tecra M1 will not read any type of SD card Help! I downloaded the latest drivers and installed according to the directives of the readme.txt file and even thought to copy the SDDEVMGR.dll in the System32 folder. Thank you very much. Craig Hello Usually, books are not all sizes of SD card and so you should be sure that the used SD card is supported and compatible with the Tecra M1 card reader. But if you are using a compatible SD card the laptop should be able to read/write on the SD card. PS: A registry cleaning would be desirable. CCleaner is a great registry cleaning applications Satellite A20 - CD/DVD doesn't read any type of disc I just got a used Satellite A20. Former owner uninstalled programs, and now the CD/DVD doesn't read any type of disc. It has worked well for the former owner. Satellite A20C - 0231Q Windows XP - Home drive SD-R2412 In the bios a cd-rom drive is listed Is there a way to locate the driver for an older machine, install it, without making a complete recovery (as the cd player does not work?)? I noticed that the driver Announces began with the Satellite A - 200. Any suggestions will be appreciated! Boarder's right. If the drive is listed in the device with the yellow exclamation point manager and the drive is not listed in Windows Explorer, you can resolve following the method described in the document of Microsoft. Cannot copy images from any type of disc. ?? Cannot copy pictures on any type of disc. the computer behaves as if she is unable to format the drive? I thought that this was done automatically. Hello · What is the exact error that you are experiencing when you try to burn the disk? · Outside photos, you are able to burn other files on the disk? · You use any burning software to burn the photos to disk? Note: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk. I suggest to format the drive and check if you are able to burn discs or not. Follow the steps mentioned below. a. be aware that Windows XP, in its native form, does not directly support CD formatting. Formatting a CD requires support for the ISO images that is missing from Windows XP. b. download or buy CD and formatting of third-party burning software. Third-party CD utilities include features like CD burning, imaging of CD and the CD put fit. c. install the third-party software, following specific instructions in accordance with the software documentation. Many programs will require you to restart Windows to complete the installation. Close all other applications and do it. d. place the disk you want to format in the drawer. Make sure that it is in the drawer of CD - R or CD - R/W and not another tray (tray of DVD) or a simple CD player. e. start the third-party application and follow the instructions on the screen as they appear. Choose the "Format CD" option on the file menu, or choose 'Create a new CD.' This application controls tend to vary an application to, so be sure to check the documentation. f. don't forget to leave the CD in the taskbar until the process is completely finished. If you remove the CD before the completion of the formatting, you will ruin the disc. g. give a volume name to your new CD. I also suggest you to check the article mentioned below. Should which CD or DVD format I use? http://Windows.Microsoft.com/en-us/Windows7/which-CD-or-DVD-format-should-I-use Note: This article also contains information about Windows XP. I suggest you run the fix it is present in the article below. Your CD or DVD drive cannot read or write media http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us Thanks and regards. Thahaseena M I have a blue screen I can't start and I don't have a boot disk I can't start in safe or any type of mode ccorr, What version of Windows and service pack level are you? Here are a few things to try: Disconnect all external devices (printers, USB Hub, drives external, etc.) and try to start. Post back with the error information and results. Mike - Engineer Support Microsoft Answers Original title: shutdown process When shut down you your PC is windows or any component, subcomponent, or applications are any type of updates during the closure of the process? Updated firmware updated? Wireless routers receive prior to updating the OS before finishing his closing process. What happens behind the scenes? It saves but does not update. The only thing that has updated during shutdown IMO is windows updates. What happens in Windows Mail? I can not send attachments with any type of graph. What happens in Windows Mail? I can not send attachments with any type of graph. People receiving my email with attachments receive between 60 and 70 copies. I called my provider, my safety, send the computer for a week for a Tech and no one can answer this problem for me. If I don't get this problem resolved I will never use Microsofts again e-mail programs. Have Dell Inspiron 1720, it doesn't read any type of dvd I have windows vista and my cd/dvd drive does not read or play any type of dvd. Hello Try the microsoft 'fix - it' for your problem below http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us and read this information too Original title: Windows Fax and Scan is unable to fax any type of attachment I am trying to send a PDF using Windows Fax and Scan Ver 6 Build 6002 SP2. Windows Vista Business SP2, Adobe Acrobat 9 Pro using Just ran the SFC system (C:\windows\systems32\sfc/scannow) and repair files corrrupt. WF & S now works well when you attach files. Z3 phone won't save any type of picture file For about five days now my Z3 phone won't save any type of photo file using any method I can think of. I deleted a lot of memory, tried to use the diagnosis Album (no joy), saved on my laptop (no problem detected during the process), cleared the cache and junk files, I don't know what to try next. It will save all the pictures taken by the camera, will not save the screenshots, wallpapers, downloads, transfers - any photo file type whatsoever. Help, please! Settings > apps > all > camera > clear data > restart the phone What do you see under Settings > storage > free memory? OfficeJet Pro 8600, Windows 7, any type of document with an image prints very slowly OfficeJet Pro 8600 Premium. Windows 7 32 bit, any type of document with an image prints very slowly including .doc. Docx, pdf. Even when printing in draft mode. Other documents are very well Take a look at this link. I'm not allowed to change any combination of files for any type of file... If I try to associate a file type with a program that I can't the box is grayed out to always open the file with this program, for example, if I try to open .py (programming in python language file) with python from another program whenever I have to right click and open with python, but if I want to choose the "always use". the selected program to open this type of file"is grayed on I can not change it... pls help Hi VikkHckrz, 1. you remember to make changes to the computer recently? Method 1: You can consult the following KB article and run the fix it tool available and check if you can assign file association. When you run an .exe on a Windows Vista-based or Windows 7 computer file, the file may start another program http://support.Microsoft.com/kb/950505 Also check out the link: http://Windows.Microsoft.com/en-us/Windows7/change-which-programs-Windows-uses-by-default After running the fixit so check the option is grayed out or not. Method 2: If you're still having problems, then you can try to change the settings in the registry only if it is present on your computer and check if it helps. a. Click Start, type regedit in the search box and press ENTER. b. navigate to the HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\policies\Explorer (c) in the right side of the screen, double click on "NoFileAssociate". d. change the value of "NoFileAssociate" from 1 to 0. e. exit the registry editor and restart the computer and check. Important: The above mentioned steps show you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, follow the steps from the link below: http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry Hope this information is useful. Jeremy K If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly. Opening screen on iPad 2 Air is shifted to the left with iOS 10 Anyone else facing this problem since installing iOS on iPad 10 2 air? The date and time are offset left on my logon screen. Did not have this problem with my iPhone SE. Apple pencil must be reconnected? Just got a pencil of Apple and the iPad Pro. I love! Used last night and went to use it this morning and the pencil did nothing. I had to connect to the iPad, then plug it back in Bluetooth settings. Is this normal? Should not always simply works wit Problem with the viewport printer I bought a LaserjetPro M125nw black and white printer and can't easily read the display screen because there is no light. I have the printer to print OK but I had to use a torch. Is it a fault or the display light can be enabled somehow? I've had th I discovered that my google chrome and internet explore have rocket tab and tablika malware on them. I went to the Add/Remove (or were) as well as the two browsers to reset. I was told that I had to delete these, there was no entry in the extensions, My Windows Vista Poduct key! Help Hello. I used to have an old pc which had vista windows on it. I threw. now I am building a gaming pc and I like windows vista so I want it there. How can I find the produckt key. I tried to buy windows vista at amazon, but he says his is univable. ISimilar Questions
I have an a60-199 on windows XP Home Edition. It is about 18 months and unfortunately out of warranty. The issue I'm having is that the cd rom drive (a carpet * s uj-830) is not play or recognize any type of cd or dvd. Finally, I used about a week ago and have tried resetting the system to forward, then nothing works.
Fyldelass.
According to the title, my M1 will not read any type of SD card. I'm running the SP2 of XP reloaded from original floppies, and it is fully up-to-date with Windows Update.
The little green light adjacent to the slot flashes briefly on the insertion of a card, but nothing happening for example no open option window and nothing visible in my computer.
I obviously lack something, so any help or pointers are welcome.
I try to remove the SD card in the Device Manager controller and remove the driver software malfunction. Restart the computer and install the latest drivers again.
In Control Panel, the drive is listed, but with a yellow triangle and a message indicating that the device cannot be used... driver problem?
Thank you!
After reboot everything should be ok again.
Microsoft Answers Support Engineer.
Visit ourMicrosoft answers feedback Forum and let us know what you think.
Thanks for posting on the Microsoft answers Forum. You will need to provide additional information.
Do you get any error messages?
If something has changed on your system prior to this issue (hardware or software)?
What "Startup disk" do you have? It is the manufacturer of PC?
The first thing to do is to boot your system and start pressing F8 as soon as it starts booting. You will get the Windows startup options screen. Select "Disable automatic restart in the event of system failure" and let it restart. When it starts, it can now stop with an error screen and give an error message and code.
Visit our Microsoft answers feedback Forum and let us know what you think.
I get "the message could not be sent. These data are incorrect. »
I can send a cover sheet, or something typed into the dialog box, so the modem works fine.
The problem is with an attachment to a fax. Tried to PDF, DOC, ZIP, JPEG, and TIFF.
I found lots of posts with the same problem, but no solutions or problem.
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you thinkMaybe you are looking for