Problem with the viewport printer

Similar Questions

• HP officejet 4620 there is a problem with the system printer or ink 1000008 0x6

  PTR does not print page alighn.  keep saying "there is a problem with the printer or ink system 0 x 6 1000008' I turned market several times."  I unplugged.  I remove and reinsert the ink cartridges. I removed and reinserted the paper AND

  I always get the same message!

  This article should help to resolve the error you get:
  http://support.HP.com/us-en/document/c03081973

  Try the steps and tell us if it helps.

  Good luck!

• Tecra A8: Problem with the USB printer connected to the Port Replicator III

  Hi all

  I have a problem with my Tecra A8, year Advanced Port Replicator III and a USB printer. With the printer connected to a USB port on the Port Replicator, I have to wait 2 minutes for printing to start. When it is connected directly to a USB port on the laptop and the laptop disconnected from the Port, printing starts immediately. I have the latest drivers from the Isensys of Canon LBP 2900 installed and Windows Vista professional as the operating system.

  I called the technical support of my country, but her is not recorded similar problems.

  A person with similar problem? Some help would be very appreciated.

  Thanks in advance.

  Hello

  Seems like a strange question... Already done the standard procedure in the event of such errors? :)

  The standard procedure is somehow similar to the following:

  -Update your BIOS
  -Update all the drivers for your machine
  -Update your printer drivers
  -Update your operating system

  If all else fails, then try an another Portrep if available, maybe you need to contact your dealer for an another portrep for the test.

  Something like this should be your way. And then you sucessfully made a TROUBLESHOOTIN´ ;)

  I'd be happy to hear feedback from you on your situation...

  Welcome them

• HP LaserJet 4100: Problem with the universal print driver

  Desktop: HP Envy 700-214

  OS: 10 64-bit Windows

  Printer: HP LaserJet 4100 (with a USB to parallel cable)

  I was able to properly use my LaserJet for Windows 8.1 through my Windows 10 crossing (which I upgraded to about 18 months ago).  Quite recently, I welcomed Windows Installer a upgrade, and at this time there, I lost my ability to print.   It has been on my default printer, but gave an error message when I tried to print.

  I tried to "Add a printer" and selected the HP 4100 connected to the LPT1 port.  It would not print a test page, and the printer does not like in the reception of data.

  I then tried to install the (PCL6 and Postscript) universal print driver with similar lack of results.

  I tried uninstallinDeg and reinstall the drivers, but once again no joy.  Incidentally, although I'm going to Device Manager > printing queues and remove the drivers, when I set up an application like Word and select the Menu printing, many copies of drivers rest yet.  When I go to remove them using the printui/s/T2, it is said that they are currently in use and cannot be deleted.

  Yet once again, I repeat - it is not a hardware problem because everything worked well before Windows upgrade.  I just need to find a way to reinstall a driver who will speak to my printer.  It of frustrating because I was able to do that before, but may not know what I am doing wrong.

  Thanks in advance.

  Hello GaryLynn,

  You saw did a lot of things to try to solve this issue.

  However the USB to parallel isn't anHP officially supported connection type.

  in any case, what suggests I´d, is that you try this:

  • Unplug the hybrid cable that you use
  • Uninstall all copies of the printer and its duplicates.
  • Stop the print spooler by using the services on windows (type on cortana services.msc) locate print spooler and stop it
  • Go to run and coil type, look at the Printers folder and delete all the files that are there (if any)
  • Restart the spooler to print services.
  • Download and install this driver package
    http://h20564.www2.HP.com/hpsc/SWD/public/detail?swItemId=FP-148007-1
  • Turn on your printer and connect the cable.

  After this exercise, check to see if windows 10 has managed to find the best driver to use your printer.
  If widows did not automatically find it, try the manual on add a Printer Wizard.

  If not reading as LPT1, check ports either USB00 ' # ' or a port DOT4, those who should be the ports to use.

  I hope this helps you get your printer going again.

  Thank you

• Problem with the new printer print only some word from the quarterdeck documents

  I hope someone can help. I have a Dell Vostro and had 8 happy years print on a Canon printer. I just upgraded to a Canon Pixma iP4600 printer. I think that with some (not all) MS word documents it prints the rear tray (mean't for photo paper) by opposition to the tape before (designated for plain paper), for which I set the properties of the printer.

  Canon tech support say there is a Windows problem. I already reinstalled the printer driver but sill the same problem. Hope someone can advise.
  Happy Days!
  Bryan

  Hello
   
  This phenomenon only occurs with word documents?
  Have you checked if this happens with any other application?
   
  As you have already defined the properties of the printer and the problem is only with a few word documents. The first step would be to check if the word printing settings are defined in law.
  To fix printing on word problems, see the steps mentioned in this link:
  http://Office.Microsoft.com/en-us/Word/HP051887411033.aspx
   
  Sometimes this also happens if the printer settings are ignored when you print a Word document. To check if these settings are correct, try the steps mentioned in this article: http://support.microsoft.com/kb/904805
   
  If you still find difficulties in printing, run the Microsoft Fix it to reset the settings: http://windows.microsoft.com/en-us/windows-vista/Troubleshoot-printer-problems
   
  Post back with the results, so that we can help you better.
   
  I hope this helps.
   
  Kind regards
  Syed V
  Answers from Microsoft supports the engineer.

• Problems with the Epson print e-mail

  When I try to print all I get is numbers and letters l it happens when I try to print from the net, as my email address. I think I just need to change a setting, but I don't have the slightest idea what to do for the changes

  I already got in touch with EPSON, cost the problem has something to do with the HTML text

• HP 5742: Problem with the new printer 5740

  Printer will not recognize Photo tray when the touch screen works, even if the photo paper is inserted. No print of the main paper tray.

  Hi @Eddiethe12,

  Welcome to the HP Forums!

  I noticed that your HP 5742 printer will not recognize the Photo tray when the touch screen works, even if the photo paper is inserted, and that it will print from the main paper tray. I'm sorry to hear that, but happy to help!

  What is the size of paper is you try printing on photo paper?

  In the meantime, please go through these guides:

  1. Print Photos with HP ENVY 5640 5660, 7640 e - all - in - one, HP Officejet 5740 and 8040 e - all-in - One Printer Series.
  2. Print of Photos stored on your computer (Windows).

  Hope these help guides and hope to hear from you soon!

• Problems with the wireless printer, keep losing the connection by modem

  I keep the bad connection Wireless between my laptop and my wireless printer, a friend and I have tried many things to start, but nothing helped.

  Hello

  1. What is the brand and model of the computer?

  2 did you receive an error message?

  3 did you changes to the computer?

  Method 1:

  I suggest you to see link and check.

  I suggest you to perform troubleshooting services and check if they list any error messages-
  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 2: Run the Fixit tool from the link of the article below.

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 3: Perform the steps in the below article mentioned.

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Method 4: Update the printer from the printer manufacturer's drivers.

  Update drivers: recommended links

  http://Windows.Microsoft.com/en-us/Windows7/update-drivers-recommended-links

  Reference: http://windows.microsoft.com/en-US/windows7/Install-a-printer

  See also:

  Wireless network card: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/wireless-networking-frequently-asked-questions

• Problem with the default printer setting.

  My default printer setting is changed without doing me it. This can be avoided?

  Thank you. I did this. I also installed the Thirdring app and it works a treat, so I'll see how things are going in the future. Thanks for your helpful tips.

  Ian

• Problem with the HP printer Installation.

  My HP6500 printer requires: Windows XP pack 2; Windows Vista; or Windows 7. How do install when my operating system is Windows 8? Thanks in advance for any help.

  Hello

  There are several variations of "HP 6500" that could be your printer on the HP Web site. I suggest that you go to:

  http://WWW8.HP.com/UK/en/drivers.html

  Look for your printer, and then follow the instructions to install it in Windows 8. If there is full drivers/software available then use them *.

  * Make sure that you choose the drivers 32 or 64-bit according to your version of Windows 8. To find out if you are running Windows 32 or 64 bits 8, press The Windows Logo key + X on your keyboard, and then select System. Now look where it says, "System Type".

• Print problems with the recent update to Version 10.11.5

  Print problems with the recent update to the Version of El Capitan 10.11.5.  Cannot print to my Epson and Samsung printers after update to new IOS.  Print jobs get hooked on my Mac Pro.

  Roger 510 wrote:

  Print problems with the recent update to the Version of El Capitan 10.11.5.  Cannot print to my Epson and Samsung printers after update to new IOS.  Print jobs get hooked on my Mac Pro.

  Have you checked with Epson for an updated printer driver?

• HP Officejet Pro 8600 + "there is a problem with the printer or the ink system... »

  I have a HP Officejet Pro 8600 + which is coming up with an error message. This just happened out of the Blue yesterday. The printer is a little older than a year.

  It is said:

  "There is a problem with the printer or ink system. Printhead not missing not detected incorectly installed or incompatible.

  I've deleted and reinstalled ink cartridges, head, unplugged, cleaned up, etc etc.

  HP Officejet Pro 8600 +.

  Product number CM750A
  Sequence number {content removed}
  Not under warranty

  Please notify.

  I'm sorry that you are experiencing this issue. Here is a link that can help you with the ink system.
  http://goo.GL/BXDFf
  
  It seems to be a bad printhead, or it needs manually cleaned with water and lint. If these steps do not resolve the problem, contact HP (1800-474-6836) support.

• OfficeJet Pro 6835: Problem with the print head - Oxc19a0003

  Just bought the Pro Officejet 6835 this month of April and now the print screen shows "Oxc19a0003, there is a problem with the printhead". Had tried a hard reset of the e power cord does unplugging and is still showin the same error. Can't find a number of HP support, I can call or chat online. Help, please!

  Hello

  Its unfortunate to see this error on a new pritner.

  The error appear while you were setting up the printer for the first time, before installing the ink? (Yes/no)

  The error appear while you have been putting in place of the printer for the first time, after installation of ink? (Yes/no)

  Can I know if you had printed a few pages before the error appeared? (Yes / no)

  The error appear as soon as you switched on the printer? (Yes / no)

  However, please call HP Technical Support for assistance.

• HP Officejet 5740: there is a problem with the printer

  Every day the printer (not standby) turns on and shows "there is a problem with the printer. Turn the printer off, then on. "why what is happening every day?

  This problem got solved, later. Although tech hp sent me the ink HPInstant and that they "reset" of my printer, the error message returned in a few days and continues every day. Another call to Tech Support/InstantInk advised me to return the printer for an Exchange (it's 60 miles a way back). We decided to install Instant ink cartridges, as a last resort to resolve the error messages, and it worked. No error message. I put the original ink cartridges in the printer I can use those to the top. Still no error message and this printer now works well. PERSONAL OPINION: When we enrolled in instantink, hp tried to contact our printer via wireless (whatever) and when it failed an error occurred every DAY, after the installation of the instant ink cartridges a connection has been established at hpinstantink have finished the registration process.

• OfficeJet Pro 8600: message "problem with the printer or ink system.

  I replaced the magenta cartridge with a new cartridge genuine HP (end of warranty 2017/01), but now get a message "problem with the printer or the ink system.

  If I restore the old cartridge I get the message that it is empty, but all the other options of the printer are available.

  Online support does not give me any result of solution but suspect there may be a manufacturing error in the new cartridge.

  Does anyone else have this problem or advice?

  Hello
  
  Please click HEREto access the procedure which should solve the problem.