Abandonment of the Internet Explorer Web sites

Similar Questions

• Whenever I try to download a file from the internet it get the same message everytime "he could not open the Internet Explorer Web site.

  Loading of the Internet

  Whenever I try to download a file from the internet it get the same message everytime "he could not open the Internet Explorer Web site.  The site requested is either not available or cannot be found.  "Please try again later ' this happens for all sites, I try to download from... Please help.

  Hello

  To work around this problem, follow these steps:

  1. start Internet Explorer.
  2. on the view menu, click Internet Options.
  3. on the Advanced tab, clear the do not save encrypted pages on the
  disk check box.
  4. go to the page where you received the error.
  5. right click on the file link, click on save target under, select one
  destination and then click Save.
  Good luck!

• Is text quality of significantly lower than Internet Explorer Web sites, there a solution for this?

  The quality of the text on Web sites is pretty poor thin type and definition blurred, but images are good. The quality is much worse than IE8 on the same computer.

  Firefox uses your setting at the level of the system for ClearType anti-aliasing fonts. Internet Explorer has a separate setting, so you can use ClearType in IE even if you don't use it - the system-wide. Which is why you see a difference.

  You can check your setting of ClearType by following the steps in this article:

  HOW to: Use ClearType to enhance screen fonts in Windows XP (MSKB 306527)

• I use to be able to access farmville 2 on my laptop with no problems. However for the last week I get, it's the Internet Explore cannot display the Web page.

  I ran the scan of the internet Explorer and it says to make sure that the ssl 2 and 3 more tls is checked and they are but still no luck. Does anyone have a solution to this problem

  Hi Robert,.

  1. This does happen with all the other sites?

  2 have had any changes made to the computer before the show?

  Please follow the steps from the link and check that it works very well.

  See the link.

  "Internet Explorer cannot display the webpage" error in Internet Explorer

  http://support.Microsoft.com/kb/956196/en-us

  NOTE: The Reset Internet Explorer Settings feature might reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  For all windows questions do not hesitate to contact us and we will be happy to help you.

• C4580 all-in-one does not print the page Web of the internet explore 9 64-bit

  C4580 all-in-one does not print the page Web of the internet explore 9 64-bit

  Message: Script error...

  OK if you use IE9 32-bit

  Latest version of the driver from HPupdate

  Same problem on 2 different PC - running Win7 Home premium, another the proff of Win7, both 64-bit

  Hello borisgit,

  As you have noticed one solution is to run IE9 in 32-bit mode. You can also try running the 64-bit version of IE9 as administrator to work around this problem.

  Script error when you try to print from Internet Explorer 9

• using IE8 WINDOWS XP pro only some websites display the internet Explorer cannot display this Web page

  Especially the McDonald's Web site when you click on the first time career site. 2nd time, if you click on it will open

  is also very slow. Most of the other sites are ok.

  I had saw compatibility does not, since I checked put display up-to-date lists from microsoft

  & display intranet sites in compatibility mode I can view this website 2nd time round now

  I used to be able to display at all.

  Thank you

  Hello

  You can connect with McDonald's here: http://www.mcdonalds.com/us/en/contact_us.html

  Thank you.

• 0x800A0046 0 x 80248011 0x80072EE7 0x8024402C 0x8024502D 0x800A01AD site Web Microsoft Windows Update or connect to the Microsoft Update Web site

  • 0x800A0046 0 x 80248011 0x80072EE7 0x8024402C 0x8024502D 0x800A01AD? Regds, 'a journey of a thousand miles begins with a first step."

  Resolution for the error Code:

  0 x 80248011, 0x80072EE7, 0x8024402C, 0x8024502D, 0x800A0046, 0x800A01AD

   

  When you try to connect to the Microsoft website Windows Update or connect to the Microsoft Update Web site, you may receive one of the following error codes:

  • 0x800A0046
  • 0 x 80248011
  • 0x80072EE7
  • 0x8024402C
  • 0x8024502d
  • 0x800A01AD

  CAUSE The 0x800A0046 error code may occur if one of the following conditions is true:...

  • The 0x800A0046 error code may occur if one of the following conditions is true:
    • The logon user account belongs to the guests or limited account groups.
    • The security descriptor does not have authenticated users run Windows Update or Microsoft Update.
    • The impersonate a client after authentication policy is missing the account administrator and Service in the list of users and groups.
  • Error code 0 x 80248011 may occur when there is a problem with the database that stores Windows Update or Microsoft Update information on your computer.
  • The 0x80072EE7 error code may occur if the client computer cannot find the correct IP address when it tries to resolve a URL for the Windows Update Web site or the Microsoft Update Web site. This error can occur if the Hosts file contains a static IP address.
  • The 0x8024402C or 0x8024502D error codes typically occur because there is an incorrect character in substitution of proxy settings.
  • The 0x800A01AD error code may occur if the c:\windows\system32\wuaueng.dll file is missing or is not registered correctly.

   

  RESOLUTION

  0x800A0046 error code to resolve this error, use one of the following methods: me...

  0x800A0046 error code

  To resolve this error, use one of the following methods:

  Method 1: Remove the user account that is experiencing difficulties for customers or account groups

  1. Click Start and run, type control admintools, and then click OK.
  2. Click on computer management.
  3. Expand local users and groups.
  4. Select users.
  5. Open the account used to access Windows Update or Microsoft Update.
  6. Click on the Member tab of.
  7. Select the user account you want to remove, and then click on remove.

  Method 2: Set the security descriptor

  1. Click Start, run, type cmd, and then click OK.
  2. Type sc tisb wuauserv D: (A; CCLCSWRPWPDTLOCRRC; SELLERS) (A; CCDCLCSWRPWPDTLOCRSDRCWDWO; (BA) (A; CCLCSWLOCRRC; AU) (A; CCLCSWRPWPDTLOCRRC; CENTRAL unit), and then press ENTER.

     You will receive a message of 'Success'

     Note the Sc.exe tool is not available in a default Windows 2000 installation. The Sc.exe tool is from the Microsoft Windows 2000 Server Resource Kit.

  3. Type Exit to close the command prompt.
  4. Try Windows Update or Microsoft Update again.

  Method 3: Add the Local Administrator and accounts Service him impersonate a client after authentication

  1. Click Start, click Run, type secpol.msc and press ENTER.
  2. Expand local policies.
  3. Click user rights assignment.
  4. Double-click to open the impersonate a client after authentication
  5. On the local security settings tab, click on add a user or group, and then add the administrator and the Service to the list of users and groups.
  6. Click OK and restart the computer.

  Method 4: Configure the remote procedure call (RPC) service to log on under a Local System account

  1. Click Start and run, type services.msc, and then click OK.
  2. Find and right-click the remote procedure call (RPC) service and then click Properties.
  3. On the connection tab, click Local System account, click on apply and then click OK.
   

  error code 0 x 80248011 before solve you this problem, clear the Microsoft Internet Explorer cache. To do this, follow these steps:

  1. In the Internet Explorer Tools menu, click Internet Options.
  2. On the general tab, click on delete files in the temporary Internet files section.
  3. Click OK, and then click OK again.

  To resolve this error, recreate the database that stores Windows Update or Microsoft Update information on your computer. To do this, follow these steps:

  1. Click Start, click Run type cmd in the Open box, and then click OK.
  2. At the command prompt, type the following command and press ENTER: net stop wuauserv
  3. At the command prompt, type the following command and press ENTER: cd /d c:\Windows\SoftwareDistribution

     Where c:\Windows is the folder where Windows is installed.

  4. At the command prompt, type the following command with the quotation marks and press ENTER: rd /S /Q DataStore
  5. At the command prompt, type the following command and press ENTER: net start wuauserv.
  6. Close the command prompt window.
   

  0x80072EE7 error code to resolve this error, examine the Hosts file. (This file can also be hosts. Sam.) Make sure that the file lists all the entries IP static for the Windows Update Web site or the Microsoft Update Web site.

  The Hosts file is located in the C:\Windows\system32\drivers\etc folder. To view the Hosts file, you may need to associate the file with Notepad. To do this, follow these steps:

  1. Right-click the Hosts file.
  2. Click Open with, and then select Notepad from the list of programs.

  If the Hosts file contains a static IP address that is associated with Windows Update or Microsoft Update, comment the entry by adding the sign # at the beginning of the entry. You can also delete the whole line and save the changes to the Hosts file.

  Note programs, such as Web accelerators, accelerators DNS, utilities of caching DNS and Spyblockers, can add static IP entries for the Windows Update Web site or the Microsoft Update Web site to your Hosts file. This scenario can cause Windows Update or Microsoft Update to fail.

   

  error codes 0x8024402C or 0x8024502d to resolve these errors, remove the characters from the list of exceptions to the proxy, and then clear the proxy cache. To do this, follow these steps:

  1. Open Internet Explorer.
  2. On the Tools menu, click Internet Options.
  3. Click the Connections tab, click LAN settings, and then advance.
  4. Delete any entry in the Exceptions section.
  5. Exit Internet Explorer.
  6. Click Start, run, type cmd, and then click OK.
  7. Type the following commands. Press ENTER after each command.
     • proxycfg d
     • net stop wuauserv
     • net start wuauserv

  0x800A01AD error code to resolve this error, use one of the following methods. Method 1: Register the MSXML program files to register the MSXML files, follow these steps.

  Note You may not have installed the files listed in steps 3 and 5 on your computer. If you don't have one of these files, when you try to save the file, you will receive an error message similar to the following error message:

  LoadLibrary (".dll") has failed - the specified file name could not be found.

  You can ignore this error message and continue to the next step.

  1. Click Start, click Run, type regsvr32 Msxml.dll in the Open box, and then click OK.
  2. When you receive the following message appears, click OK:
     DllRegisterServer in Msxml.dll successful.
  3. Click Start, click Run, type regsvr32 Msxml2.dll in the Open box, and then click OK.
  4. When you receive the following message appears, click OK:
     DllRegisterServer in Msxml2.dll successful.
  5. Click Start, click Run, type regsvr32 Msxml3.dll in the Open box, and then click OK.
  6. When you receive the following message appears, click OK:
     DllRegisterServer in Msxml3.dll successful.

  Method 2: Save the file c:\windows\system32\wuaueng.dll to save the c:\windows\system32\wuaueng.dll file, follow these steps:

  1. Click Start, click Run, type regsvr32 c:\windows\system32\wuaueng.dll and then click OK.
  2. When you receive the following message appears, click OK:
     DllRegisterServer in successful c:\windows\system32\wuaueng.dll.

  Kind regards
  Sohail Patel

  Regds, 'a journey of a thousand miles begins with a first step."

• Error message blocking the use of Web sites

  When I go to some of my registered websites I get a pop up box message "Message from Web page! (error object) "I'm OK to click and it keeps just return / the same phenomenon occurs when I click on the X to X out of it, he keeps returning, how to fix it from preventing me to go to my trusted sites?

  Hi Hardy,

  Welcome to the Microsoft Community and thanks for posting the question.

  According to the description its looks like you is facing a problem while accessing the Web site little.

  It would be great if you could answer these questions to help you further.

  1. have you made changes on the computer before this problem?

  2 is the issue limited to any particular Web site?

  3. what version of IE are you using?

  Try the following and see if it helps.

  Method 1:

  I suggest you to see the steps in the following Microsoft article and check if it helps.

  How to resolve script errors in Internet Explorer on Windows computers
  http://support.Microsoft.com/kb/308260

  Method 2:

  Add the particular site as a trusted site

  Security zones: adding or removing websites: http://windows.microsoft.com/en-US/windows-vista/Security-zones-adding-or-removing-websites
  NOTE: There is for Windows XP as well.

  Method 3:

  Can't access some Web sites in Internet Explorer

  http://support.Microsoft.com/kb/967897

  NOTE: The Reset Internet Explorer Settings feature might reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  If you need Windows guru, do not hesitate to post your questions and we will be happy to help you.

• Update problems, I just reinstalled XP pro and I can't get the updates from the windows update web site

  I just reinstalled XP pro and I can't get the updates from the windows update web site. Whats up with this please help

  There is no way that anyone might be able to help without more. My initial guess and it is just a guess, is that you have to update Internet Explorer .v8. Click HERE and download IE8 and install it. Try again updates once the installation is complete.

• Try to use the Windows Update Web site

  I try to use the microsoft update Web site.  Whenever I try to start the update process I get a message asking me to please change your Internet Explorer security settings / persistence under Userdata, select Enable.

  When I check, the option is already set that way.  I am running Windows XP.  Can someone help me get the Microsoft update Web site to check that the setting is correct?

  http://update.Microsoft.com/windowsupdate/v6/showarticle.aspx?articleid=3&ln=en&IsMu=false

  Description of the problem

  This error appears when you attempt to save advanced settings on the site to update with Internet Explorer Userdata persistence disabled.

  Applicable operating systems
  • Windows 2000
  • Windows XP
  • Windows Server 2003

  Resolutions

  1. make sure that the Local Administrator account and the Service are added to the security policy 'impersonate a client after authentication ". Click Start. Point to programs. Point to Administrative Tools. Choose local security policy. Expand local policies. Select the user rights assignment. Double-click to open the impersonate a client after authentication. On the local security setting tab, add the Service and the administrator of the list of users and groups. Click OK. Restart the system.

  2. enable the Userdata persistence in Internet Explorer Start Internet Explorer. On the Tools menu, click Internet Options. Select the Security tab. Select the Internet Web zone icon. To adjust the security level, click custom level. Under Miscellaneous enable the Userdata persistence. Opens the dialog box are you sure you want to change the security settings for this zone . Click Yes. Click OK. Try Windows Update again.

• Glitch in the Internet Explorer browser? Do not know what question is...

  Hello

  There is a reason, that I was frustrated by the design of web sites over the years because of various browser issues.  So I hope someone can help me with this.

  I use CC of Muse.  I am re-doing a Web site for the customer.  I do most of the design on my Alienware home computer, and until today, I had no problem with Chrome, IE or FF on this computer.

  You can see the site live at:

  http://hissign.com/newdevelopment/index.html

  When I go to the Office of the client to work, his computer is obviously different from mine.  It's a Dell XPS.  So, I saw the site above on his computer.  So far, in FF and Chrome, it just seems like it should.  Video playback and button works brilliant.  Here are 2 screenshots in each of these browsers from the computer:

  

  

  But when I looked in Internet Explorer, the button on the side, it's weird looking - text is not where it should be.  In addition, the video does not load and I get the message "browser does not support.  I put the IE version on the screenshot below:

  

  Keep in mind when I look at this site on my Alienware with IE I do not get this weird problem you see above.  It works exactly as it should.

  So any help is appreciated.  Is that its Internet Explorer browser settings?  There is a glitch of Muse (I don't see how it can be if the site works on my Alienware IE)?  Could the cache of the browser IE need clean?

  Please notify.

  Thank you.

  the first thing I tried: played fine.

• Cannot synchronize windows security 8 for the family with Web site

  I already have a security account for the family windows on pc windows 7 of my son.  We just got him a windows Tablet 8 for school and I want to add this device to his account with the same settings.  I went through the installation on windows 8 (creation of a local child account for him, which allows security for the family for the account).  When I hit the button to manage the settings on the family safety website, it tells me that the service is not available.  My Internet as fine (since I'm on this site), so I doubt that it is a temporary problem.  On the family safety website, it shows its Windows 7 PC, but not the tablet of windows 8.  Someone has ideas of how do I synchronize the security settings for the windows family 8 with the site?

  Hi Mike,.

  Do you get the error message when you press the button "manage settings on the family safety Web site?

  You can check the status of the safety of the family here: https://status.live.com/detail/fss

  It is possible that your Microsoft Account needs a form of additional verification.

  Follow these steps:

  1 1 glisser slide from the right side of the screen, then select settings

  2. Select change PC settings.

  3. Select accounts

  4. Select your account

  Now, you can see some indications that your account or the machine needs additional checks. If you could click on the link and follow the instructions provided, this might solve your problem.

  Once you are done, follow these steps:

  1. go in other accounts (under accounts where you were previously).

  2. Select the account you want to have a child, and then click change

  3. change the account to a child account, then select OK.

  To ensure that you are connected to the parental control service, follow these steps:

  1. press on the button of the window on your keyboard

  2. tap parental controls and select parental control

  3. press on the large enough to Manage settings on the Family Safety website button.

  4. you should see a list of people who can manage these settings online.

  Let us know the result. If you have any other questions, we will be happy to help you.

• The small icons to the left of Web site names (for example the white boy 'f' in a blue box for Facebook) on my list of bookmarks disappeared for that I now only have the names themselves, making it more difficult to navigate.

  Normally, when I click on the bookmarks at the top of my screen, the list of Web sites that appears contains a small icon to the left of each bookmark. Now I get only a list. No icons. What happened to the little flag four colors for Hotmail, the 'f' in a blue box for facebook and all the rest? It is now much more difficult to navigate.

  https://support.Mozilla.org/en-us/questions/910682

  Thank you

• IE has a function of right click to "Create a shortcut" on the desktop for Web sites... FF has something like that?

  IE has a feature done right click to "Create a shortcut on the desktop" for Web sites... FF has a function simalr?

  No, but there is an extension that adds this functionality in Firefox.
  deskCut
  https://addons.Mozilla.org/en-us/Firefox/addon/66/

• Each icon on the desktop is subject to the same picture of the internet Explorer and everyone goes to windows media player

  I don't know what I was doing, every icon on the desktop has the same picture of the internet Explorer on it and everyone goes to windows media player. I hit itunes, he goes to the same place, I hit the internet Explorer, it goes to the same place?

  Hi Ali,

  See the article after some troubleshooting:

  http://support.Microsoft.com/kb/950505

  I hope this helps!