I use to be able to access farmville 2 on my laptop with no problems. However for the last week I get, it's the Internet Explore cannot display the Web page.
I ran the scan of the internet Explorer and it says to make sure that the ssl 2 and 3 more tls is checked and they are but still no luck. Does anyone have a solution to this problem
Hi Robert,.
1. This does happen with all the other sites?
2 have had any changes made to the computer before the show?
Please follow the steps from the link and check that it works very well.
See the link.
"Internet Explorer cannot display the webpage" error in Internet Explorer
http://support.Microsoft.com/kb/956196/en-us
NOTE: The Reset Internet Explorer Settings feature might reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.
For all windows questions do not hesitate to contact us and we will be happy to help you.
Tags: Windows
Similar Questions
-
Especially the McDonald's Web site when you click on the first time career site. 2nd time, if you click on it will open
is also very slow. Most of the other sites are ok.
I had saw compatibility does not, since I checked put display up-to-date lists from microsoft
& display intranet sites in compatibility mode I can view this website 2nd time round now
I used to be able to display at all.
Thank you
Hello
You can connect with McDonald's here: http://www.mcdonalds.com/us/en/contact_us.html
Thank you.
-
"Internet Explorer cannot display the webpage" when you try to use the CAC reader
When I try to open a session on the site of the army AKO with my CAC reader and card chip that I allowed to choose my credientials. When I hit enter I get "Internet Explorer cannot display the webpage". My internet provider is Mediacom. I can log on with the same drive ACC when I use a Web service provided by a hotel close to my arsenal. Where is the conflict? Mediacom IT did not.
Hi TommyZB,
Welcome to the Microsoft answers site.
· What is the version of Internet Explorer installed on the computer?
· What is the operating system installed on the computer?
· Is this the same computer \laptop that you use to connect to the site?
· The problem is specific to this Web site or with other sites as well?
You can try to add this site to the trusted sites and check.
1. open Internet Explorer.
2. click on tools.
3. click on Internet Options.
4. click on the Security tab.
5. click on Trusted Sites
6. click on Sites.
7. Add Web site.
8. click on OK.
Now, check if you are able to connect to the site.
This could be a problem with the settings of Internet Explorer on the computer; You can try to optimize internet Explorer settings and check, follow the procedure described in the link below:
How to optimize Internet Explorer: http://support.microsoft.com/kb/936213
Try disabling the security software and firewall temporarily on the computer and check. Make sure that enable the security software on the computer.
Understanding Windows Firewall settings: http://windows.microsoft.com/en-US/windows7/Understanding-Windows-Firewall-settings#section_4
Disable the anti-virus software: http://windows.microsoft.com/en-US/windows7/Disable-antivirus-software
Swathi B - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think. -
Hi allDB: 11.2.0.3.0
EBS:12.1.3
O / S:Solaris 64-bit SPARC
IE browser: 9.0
Description of the problem
Cloned target database TEST1 TEST2 source RMAN full backup database. But the access to the url https EBS R12.1.3 leads to "Internet Explorer cannot display the webpage"?
AutoConfig results on DB and Apps Tier and also ran ojspcompile, but still the same issue.
$ perl ojspCompile.pl - compile - hunting Pei 2
set of log file: / t000/test1/inst/apps/TEST1_Hostname/logs/appl/rgf/ojsp/ojsp
from... (by him compiling all)
using 10i internal ojsp worm: 10
synchronization of dependency:
deplist loading... 8095
enumeration of JSP pages... 8095
update dependency... 0
initialization of compilation:
eliminating the children... 6024 (-2071)
translation and compilation:
translate JSP pages... 6024/6024 in 7m50s
the jsp compilation... 6024/6024 in 35m17s
Finished!
Bounced A services after always the same question. Could someone please share the fix if encountered such a problem before.
Thanks for your time,
Problem is solved.
-
I was an active member of this forum for more than a year and was just on the site yesterday. Yet, for some reason, today, I can not access the site. I tried clicking on a search link, manually type in the name of the site... nothing works. All I ever get is the message "Internet Explorer cannot display this webpage"; no error codes... no nothing!
I have no trouble access to other sites with the exception of the McAfee site. I know that the site is running.
UPDATE: for some strange reason, now all of a sudden I can again access McAfee Forum site this morning. Still have no idea what happened here, but at least that the problem is now solved... I hope!
Thnks a lot for your time!
Hello
I am happy to know that your problem is solved. In case, if you need help, you can always post your questions as well as your valuable suggestions in this forum.
-
I am not able to access the MS Update site and receive page cannot be displayed error when I browse them directly or search results. I am able to navigate without problems to other web sites. Any ideas? I see all kinds of references to this in all directions, but the solutions that have been suggested do not work for me. I use McAfee anti-virus following personal firewall installed - version 10.15. I tried to disable the firewall (some messages indicate that this is what keeps me to access the update site), but still cannot access the MS. Update site
Any ideas?
Ian Robertson
Repost:
Cleaning a compromised system
http://TechNet.Microsoft.com/en-us/library/cc700813.aspx~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
Any attempt to access Microsoft Update leads to "Internet Explorer Cannot Display the Webpage"
No error message appears. "Analyze the network connection" does not work.
I have XP with SP3, IE7, automatic updates on, no firewall other than Windows, all other work on Web sites, including updates for antivirus (Avira Antivirus personal), I've deleted browsing history and disabled the unrecognized programs modules. I have tried to run a UpdateFix.bat one of these positions without result. Help!15 + months your computer of late on the Windows updates. Do not waste time trying to solve it: the computer must not be connected to the internet or networks in its current state.
Backup of personal data (which none should be considered 100% reliable at this point) then do a format and clean install of Windows. Please note that a repair installation (upgrade AKA on-site) won't fix this!
CF. http://michaelstevenstech.com/cleanxpinstall.html#steps
Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or a network otherwise and before using a USB key that is not brand new, or has not been freshly formatted:
5 steps to help protect your new computer before going online
http://www.Microsoft.com/protect/computer/advanced/XPPC.mspxOther useful references include:
HOW to get a computer that is running Windows XP Gold (no Service Pack) fully patched (after a clean install)
http://groups.Google.com/group/Microsoft.public.windowsupdate/MSG/3f5afa8ed33e121cHOW TO get a computer that is running Windows XP SP1 (a) or SP2 fully patched (after a clean install)
http://groups.Google.com/group/Microsoft.public.WindowsXP.General/MSG/a066ae41add7dd2bSee also:
Measures to help prevent spyware
http://www.Microsoft.com/security/spyware/prevent.aspxMeasures to help prevent computer worms
http://www.Microsoft.com/security/worms/prevent.aspxAvoid fake security software!
http://www.Microsoft.com/security/antivirus/rogue.aspxGood luck! You should be able to accomplish all of this in a few hours or more.
~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
When I try to access gmail or goole I get the edict 'internet exploer cannot display the webpage '. Not sure why this happens, it happens for all search engines.
Hello
1. are you in a position to able to view other Web pages outside the search engines?
2 How long have you been faced with this problem?
3 did you recent hardware or software changes to your computer before this problem?
4. what version of internet explore do you use?Please answer these questions, that could help us help you better.
Try the troubleshooting steps provided in the article below.
You receive an error message in Internet Explorer: "Internet Explorer cannot display the webpage".
http://support.Microsoft.com/kb/956196 -
share external hard drive
I am able to access my desktop to my laptop as part of a homegroup, but can not access the external hard drive that is attached to my office. I want to be able to back up my laptop hard disk external. Advice please.
geraintjo
I do not use homegroups, but 'true' to share, so I don't know how this is supposed to work with homegroups. But usually he should share a drive or folder, first before you can access it from another machine. (for example, click on the drive/folder properties and go to the sharing tab)
-
WNR2020 - setting up the Web page that appears when you can access the guest network
Someone knows how to set the Web page that appears when you access the network of comments? I use the WNR2020 router. Thank you very much.
It can be done by using a different material.
Above all, you will be able to find this feature in our product business and it's called the HTTP redirect.
-
Internet Explorer not able to display the web page
When I try to do Windows Update or try to access updated using microsoft.com, I get the cannot display the message on the Web page. I have no other problems, browse the web.
If you want to check the updates manually, follow these steps:
1. open Windows Update by clicking Start , all programsand then click Windows Update.
2. in the left pane, click check for updates.
For this version of Windows (Vista), the site has been replaced by Windows Update in Control Panel
TaurArian [MVP] 2005-2010 - Update Services
-
I installed a Dell Wireless 1505 low-profile carrier 1.2 antenna dim/insp in desktop. Its a PCIe wireless lan card. But since last Tuesday patches have been installed I had problems with access to the web pages, email, video, etc., even when I have 4-5 bars. Someone at - it an idea of what's going on.
Hi William e. Swann
1. what web browser do you use?
Method 1:
You can read the following article and check.
Method 2:
You can also read the following article.
How to troubleshoot network connectivity problems in Internet Explorer
Hope this information is useful.
-
I want to access and control my other laptop with wifi.
* Original title: remote access
I don't know anything then please help me from 0. I want to access and control my other laptop with wifi. I don't know where to start? Please? Reference Dell w7 while the other is toshiba w8.
(Moved from devices and drivers)
You can do this with Remote Desktop.
These can be useful:
Remote Desktop connection: frequently asked questions
The application of remote desktop help
John
-
cannot access the web page of WAP but can telnet
Can someone tell me why the following configuration won't let me access the web page of the WAP?
version 12.2
no service button
horodateurs service debug datetime localtime
Log service timestamps datetime localtime
encryption password service
!
hostname EwingWAP
!
logging buffered information
enable secret 5 $1$ z9vV$ M.rY40womPNf7YPOQqC8T.
!
username privilege 15 secret 5 careone $1$ nFXA$ ezjkiBAHeboaKYMzB4hpq.
clock timezone IS - 5
clock to summer time EDT recurring 2 Sun Mar 2:00 1 Sun Nov 02:00
IP subnet zero
!
!
Bridge IRB
!
!
interface Dot11Radio0
no ip address
no ip route cache
!
SSID tsunami
open authentication
Comments-mode
!
base speed - 1.0 2.0 basic basic-5, 5 6.0 9.0 basic-11, 0 12.0 18.0 24.0 36.0 48.0 54.0
threshold RTS 2312
root of station-role
Bridge-Group 1
Bridge-group subscriber-loop-control 1
Bridge-Group 1 block-unknown-source
No source of bridge-Group 1-learning
unicast bridge-Group 1-floods
Bridge-Group 1 covering-disabled people
!
interface FastEthernet0
no ip address
no ip route cache
automatic duplex
automatic speed
Bridge-Group 1
No source of bridge-Group 1-learning
Bridge-Group 1 covering-disabled people
!
interface BVI1
IP 172.18.86.5 255.255.255.0
no ip route cache
!
default IP gateway - 172.18.86.1
IP http server
IP http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag/ivor
y/1100
radius of the IP source-interface BVI1
1 channel ip bridge
!
!
Line con 0
line vty 0 4
local connection
line vty 5 15
local connection
!
NTP-period clock 2860650
NTP 208.90.144.53 Server
endHi Jason,
Have you tried the default user name and password?
Username - Cisco
Password - Cisco
Please try the commands below and let me know how it works...
en
conf t
AAA new-model
local IP http authentication
end
Try to open the WEB GUI by using the configured user name and password...
Concerning
Surendra -
Access to the Web Page on the local computer virtual
Hi all
I hope you can help.
I have an image of Suse Linux that I run in VMware player that hosts a web page.
The IP address of the physical machine is 192.168.0.8. The IP address of the VM image network port is 192.168.0.100
When I'm on my local network of the I can access the web page dedicated to the 192.168.0.100 with no problems.
However, when I visit a client and I don't have a network, I have run the local virtual machine on the machine but cannot access the web page.
I have install the virtual machine network as bridged so that it works on my local network.
Why can I not itself this when I do not have LAN connectivity?
What I need to change when I'm at a client site and I don't have access to the network and not a LAN access so that I can access the web pages hosted in the virtual machine?
The whole point of this is that I run the virtual machine when I'm at a client site so that I can demo of the software, but if I can't access the software, I can't demo it?
Any ideas on that?
Thanks in advance for your help.
Dave.
Use NAT on the NIC of the virtual machine, and then use the IP address that is assigned to the virtual computer by the server DHCP VMnet8.
Maybe you are looking for
-
iTunes not identify iphone or usb port
When you install Itunes on a new computer Windows 10, that's not identifies my iPhone. I tried the possible sollutions 'all' found on the web, but nothing makes any difference. When running the diagnostics on the computer it says that "Apple Mobile D
-
Having a hard time from Server Web of LabVIEW
Hi all I ran into some odd behavior in my environment LabVIEW 8.6.1. I have not used the web server within a certain time and now have a project where it is needed. First of all, I went to the Options dialog box in the category ": Configuration of t
-
Either the current offer of HONDA CIVIC and getails GENUINE credit card application
Is the current HONDA CIVIC offers truly MICROSOFT or is it a freud
-
Secure ACS Authentication and Authorization with SecurID
I am able to authenticate connection attempts using an external database (RSA SecurID). The problem is that everyone with a token is authorized to connect on any switch with priv15 or whatever I put (but no way to control who gets what access). How
-
Original title: Windows Live Mail How can I decode an 'undisclosed recipients' address on an email I sent? I had sent on a support requesting e-mail for a project with all the beneficiaries as part of a list of BCC addresses. The project was success