Ability to burn 60 fps on Bluray?

Similar Questions

• GarageBand doesn't give me the ability to burn a cd once a project is completed. It is listed in the drop down menu, but it won't work.

  GarageBand doesn't give me the ability to burn a cd. But it is on the list of options.

  Y at - it an update to provide this option?

  Is your Mac has a CD player?  The option is grayed out, until you have inserted a blank CD in your optical drive.  But it is clickable.

  

• Ability to burn a DVD with factory WIN7 Pro 64 from a USB?

  Recently bought a Compaq Elite 8200 SFF, after a few hours of use that I urged to create a WIN7 DVD factory as soon as possible. Had only DVD - RW empty records at the time (not good to burn the file WIN7), so I chose the alternative of the installfile from the factory on a USB and burn the DVD from the USB key later. My 8 GB key was little short KB of space, so I used a key to 32 GB... However, this does not work, the file WIN7 does not appear on the USB key (even if I enable hidden files). Maybe something was wrong, during the copy process because I can not boot from USB with the factory alleged WIN7 version, however, check the USB shows that about 8 GB of space (corresponding roughly to the drive WIN7 factory) is "occupied" by something. I´d like to use the 32 GB key for other purposes. However, the files on the USB factory settings are corrupt, or it is not possible to make a DVD (license problems?) once the default WIN7 was copied on the USB key? Any ideas?

  Hello:

  Unless your specific PC came with a bunch of software such as MS Office 2010 that you paid for a license and other software, all you really need is to be able to reinstall windows 7 on a new hard drive or your existing, correct?

  All drivers and most of the software except for CD and DVD burning programs are on the support page and driver Elite SFF 8200.

  So, all this...

  If you can read the Microsoft windows 7 25-character product key, you can download simple Windows 7 ISO files to burn on a DVD for the version of windows that is installed on your PC, and which is listed on the Microsoft COA sticker on your PC case.

  Burn the ISO with the option to burn the ISO on your DVD burning program and burn it at the slowest possible speed that will allow your program. This will create a bootable DVD.

  Use 25 characters on the PC product key to activate the installation.

  The key will activate a 32 or 64 bit installation.

  Then go to the support of the PC and driver page to install the drivers you need.

  Link to downloads ISO of W7 is below.

  http://www.mydigitallife.info/official-Windows-7-SP1-ISO-from-Digital-River/

  You can then get a portable hard drive and after installing all of your programs and drivers, etc., you can use the windows backup tool 7 and create a system image that you store on your portable hard drive. You can update this image any time you want and if you need to reinstall the operating system for a reason, you plug your storage device USB with the backup to this topic image, you use the W7 DVD do you, boot from it, select Repair in the lower left corner of the Setup screen , select restore backup, that it points to your image on the device of portable storage and you go.

  Worst case scenario, is that you will always have your installation of W7 plain DVD you did, which will install on any size of HARD, including an SSD drive.

  You can test that the DVD you made work by starting her and just do not proceed with the installation.

  BTW, you can install up to 32 GB of memory in your PC.

  Paul

• Hello! I have a laptop HP Compaq 6730 s with a windows XP SP2 OS. I need help with my drive burning/writing speed CD/DVD and its ability to play DVD. __

  There an Optiac DVD RW AD-7561 pilot. Before it used to have a 8 X read speed and a 8 X write speed, I can see via NERO everytime I have will burn a DVD. But now the writing speed has become 2 X and therefore more adjustable from a NERO software. And also I tried to burn a DVD every time, he finished but it does'nt displays data that has been burnt at all... I already tried to uninstall this software, rebooted and installing it, thinking that this might well be the cause of the problem, but it's always the same. I even tried to install Roxio 9, hoping that this will solve the problem, but it still shows the same write speed 2 X... His ability to read and burn to a CD is fine, but the problem is when it comes to DVD's just makes a strange noise and takes a long time before displaying the content of the DVD and its ability to burn a data file on a DVD...

  Before this problem occurred, I remember I have inserted a DVD and tried to copy paste its content on my desktop. But while the copy is in progress, I accidentally typed on the eject button while trying to reach for my cell phone, which was placed next to the my laptop cd/dvd drive.

  IM desperate and I need an experts'advise on what to do...

  Thanking you in advance,
  Kirby baki
  KSA

  Hello k. Baki.

  Thank you for your message.  Click HERE to download/install the driver for your device.  There is also a link available at HP that is specifically for the update software to use the Service Pack 2.  Please let us know if it did or did not help to solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Xps420 bluray player BD - RE of PLDS DH - 4B1S burn BD - RE discs, but fails to burn BD - R discs

  I have a XPS420 running Windows Vista (32) Ultimate with SP1.  My blu - ray burner is BD - RE of PLDS DH - 4B1S.  All the drivers for my system are up-to-date, including the latest firmware 7 13 for the burner, and all the bluray, engraving software is up to date.

  I can burn Blu - ray rewritable (BD - RE) discs without problem but the system still shuts down and restarts (but crashes then) with an error message when you try to burn Blu - ray rewritable (BD - R).  Medium used is Sony BD - RE 50 GB and Sony BD - R (25 GB) and Verbatim BD - R (25 GB).

  I get the error message is:

  "Drive 1 not found: Serial ATA, SATA-1".

  Disc 3 not found: Serial ATA, SATA-3

  The attention!  Impossible to detect one or more drives during POST. »

  BD - R discs, I can see changes in the color of die that the original file has probably been written to disk, but the problem is after this step.  Once I have restart Vista discs BD - R defective also show that they contain files and in, for example, ULead MovieFactory6 may be progressed throughout the process of 'close disc' but which are then struck with the message "this disc is unrecognizable.

  Any help is appreciated more.

  
  

• Drive DVD/Bluray & software for El Capitan

  I replace my imac with a 27 "iMac 2009 new arrival Monday. I have not bought an external hard drive. The Apple Superdrive comments have not been stellar.

  I also know that because Sony and Apple are not friends, Bluray will not soon to Apple products. I would also like the ability to burn at DVD, if not Bluray discs. Suggestions for readers and/or software (since some players do not understand the software) will be greatly appreciated. Thanks for reading!

  vtsue,

  I recommend contacting OWC (www.macsales.com) they specialize in Macs and can help you with a Blue Ray burner and then help you to choose the software you need for your application. You can call or do a live chat, according to your preference. Before contacting them please give a little thought to what you want a device capable of Blue Ray to do for you, in this way, they can steer you in the right direction.

• No Blue Ray in CS4 Media encode or burn to disc in Encore

  Hello everyone.

  I use CS4 on Vista 64 Dual AMD @ 3.0 with memory of 8 GB and 4 x WD 750 gig HD on Raid 1

  ATI 4890

  I had burned previously several Mpeg2 BluRay discs with menus and now have lost this ability, it seems.

  I have had some problems in the past and are reloaded Vista 64 as well as this time.

  The enocder of media stops almost immediately after Quebec with an exclaimation point

  on the file trying raw Mpeg2 BluRay or BluRay 264 mt2s conversion of the camera

  file from the hard drive.

  Thus, after a change of files mt2s on the editor and export in still, it affecting everything up with a

  menu etc. She to rendor a project until its time to write or burn, then I get an error about access

  and an error code 12. I use a LG GGW - H20L BlueRay recorder/player. Who has a problem

  do double layer writing with its latest firmware installed.

  I would like to modify, menu and burn my files mt2s to BluRay, however after reading here

  and other places recently, it seems that I need to Scenerist or something now to be able to reach

  This goal.

  Something to change lately to remove what I did or what I can do?

  I do only one or two blue beams of the same thing. I'm not reproducing the mass numbers of the same thing.

  I would like to have the best image of the camera AVCHD output as engraved on a Blue Ray mt2s files

  disc. It seems in any case for me better than the Mpeg2 BlueRay files.

  Anyone have any ideas?

  With gratitude appreicated. Bob.

  Regular DVDs look great and work some fines but from time to time someone wants a BlueRay. Impression is all I can

  say about it.

  Two suggestions:

  1. Easy - create a disk image in en, then burn the Spain on a disc with the free program ImgBurn.
  2. Harder - work your way through this FAQ entry:
     

     Things and software to avoid creating DVD - V

  In the future, don't worry so much about whether the subject is marked as answered or not.  Just go up the subject at the top of the list by adding a new post that says is not really answered your issue and you need more help.

  -Jeff

• Burn a disc to 1080 50 p

  I imported and edited a film in 1980 x 1080 50 p. How can I burn to a disc in this resolution? It is a short, and if I try to burn it as a BluRay to DVD does it automatically at a resolution of 720. When I used film to 25i, it allowed the 1080 resolution most important.

  toast, or a compressor do? And I would need a separate BluRay burner, or I would be able to do as a BluRay to DVD?

  Or, after getting to 50 p, can I reduce to 25 and burn it to 1080?

  I burn some kind of record for a film club showing, but I want to make the best possible record.

  I have just FCPX. IF I don't want to spend the extra money on programs and burners, I better stick to 25i or p for the filming of the future?

  The Blu - ray specification does not support the 50 p or p 59.94 HD, only in 4K.

• I am suddenly unable to burn playlists to CD on my MacBook Air. Error message says "Disc burner or software not found" iTunes software is up to date: the current version is 12.4.1

  I am suddenly unable to burn playlists to CD on my MacBook Air. I burned a CD only 2 days ago.

  Error message says "Disc burner or software not found" iTunes software is up to date: the current version is 12.4.1

  Hi BVBigelow,

  I understand that you are not able to burn playlists in iTunes on your MacBook Air. Fortunately, we have an article (link below) which details a number of steps that can help to restore your ability to burn CDs of troubleshooting.

  12 iTunes for Mac: If you have trouble burning a disc

  Take care!

• burn in tc?

  can't see a way to do this in preparation - where I expect to do this kind of thing?

  I know, it is possible to change, but doing so is putting the cart before the horse.

  Hi ushere:

  Thanks for the suggestion. In fact, we get this suggestion a lot to prepare catalyst and are already planning it. It's really not a lot of sense to have the ability to burn timecode, as well as other metadata, in catalyst prepare.

  Keep coming suggestions!

  -Travis

• Burning an iso file in Windows 7

  I'm trying to burn an iso file with my 6 month old Windows 7 HP Office.  I googled how to make and I shoule be able to right click on the file and in the menu that appears have the ability to burn to disc.  But for some reason any my copy of Windows 7 doesn't have this option.  Why is this?  Also, I read on the site Web of Micorsofts that I should be able to double-click the iso file and it asks where I want to burn to a disc.  But instead he said: he can't open the file.  What is the problem with my Windows 7?  Or am I missing something?

  Jim Allen

  Hello

  My Windows 7 shows that when a right click an ISO file:

  

  Now please, try:

  Right click an ISO file.

  Select "properties."

  Select 'change '.

  Select "Windows Image Burner Dics;

  If it is not in the list, click Browse and select C:\Windows\System32\isoburn.exe.

  Press 'OK '.

  I hope this helps.

• Burning DVDs with HP pavilion slimline

  What is the HP pavilion slimline 35210Thave the ability to burn the DVD? The product is MXV95302WQ

  Place a blank DVD disc into the drive.  Then load Image burn.  Select the Tools tab, select the drive, select features.

  Or, press the chart of discovery and play the right side. The first line is the model # of this player. The second line should indicate «DVD + R or DVD-R (depends on the question of if you have inserted a + or - DVD disc.»

• How to reconneted windows media burner

  my player won't let me burn a cd

  Hello

  (1) what happens when you try to burn?

  You get an error message or error code? If so, specify the same

  Ask him if he was able to burn the CD/DVD before

  Method 1: I suggest you follow the steps mentioned in the links below http://windows.microsoft.com/en-us/windows7/Open-the-playing-and-burning-cds-dvds-and-bluray-discs-troubleshooter

  I hope this information is useful.

• Can't burn/wont burn?

  Hello, I have an IBM Thinkpad R51, who plays the CD but does not burn my pictures to them. Just repeat me disk insertion.  I use correct discs, not that this model does not have the ability to burn, anyone know? Thank you.

  Hello

  1. what type of DVD burner do you have? Is this a DVD burner with capacities of reading and writing?
  2. have you ever burned a DVD using this DVD player in the past?

  First check to see if your computer is equipped with CD - DVD-burning capability.
  http://www-307.IBM.com/PC/support/site.WSS/TPAD-matrix.html

  Method 1.
  To diagnose and repair problems with your CD or DVD drive when trying to read or burn media automatically.
  Reference:
  Your CD or DVD drive cannot read or write media
  http://support.Microsoft.com/mats/cd_dvd_drive_problems

  Method 2.
  The article below describes how to troubleshoot common problems that may occur when a Windows XP-based computer cannot read a CD or a DVD in a CD or DVD drive. This article contains several methods that you can use to try to solve these problems, and it also includes some advanced troubleshooting steps.
  How to troubleshoot common problems that occur when a Windows XP-based computer cannot read a CD or DVD
  http://support.Microsoft.com/kb/321641/

  See also:
  Windows XP CD Burning Secrets
  http://www.Microsoft.com/windowsxp/using/Setup/learnmore/bott_03september16.mspx

  I hope this helps.

• I just replaced my cd/dvd drive with a new TEAC one. I have Vista (32-bit) but iTunes Windows Media players, it is not recognized as a burner and won't read blank media. I need help!

  TEAC DV - 28 S - W model number

  Hello

  Try these steps and see if it helps.

  Step 1: Run the provided article fixit.

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  Step 2: Run the troubleshooter of CD/DVD burning.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-and-burning-CDs-DVDs-and-BluRay-discs-Troubleshooter

  For ITunes:

  http://support.Apple.com/kb/ts1436

  See also:

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/982116