Ability to store data

Similar Questions

• Ability to store data when thin provisioned

  Hi all

  VSphere 4.1 running in a cluster of two hosts, this cluster uses a Dell Equalogic PS4000 SAN for storage.

  Confusion I have is with thin configured data stores and my Exchange Server (2010) - running on MS Server 2008 R2 Ent.

  Exchange server uses three data warehouses on the San, one for the OS, one for data and one for newspapers.

  The data of databases store is the one that gives me problems, it has been defined as thin provisioned 750 GB, when I look on the SAN & via VCenter he said 90% full until she went to 100% after the SAN sent several alerts - the virtual machine then crashed with out-of-space error.

  To cut a long story short, I have twol questions

  (1) in this case why the SAN & VMWare say the data store is full, BUT when I connect to the virtual Windows computer it was about 50% in use?

  (2) when the data store that contains the databases filled I don't understand Exchange has fallen more but why why the crash of the VM?  The OS data store still had plenty of free space.

  I got this error by increasing the space of 100 GB to 850 GB data store while the virtual machine is very well (even if Windows was complaining to a stop suddenly unexpected).

  Thanks in advance for your help.

  K

  And without perspective, as it was put in service end and touch 750 GB, 300 GB, then was removed, it would not 750Go because it may not decrease in size - is that correct?

  (This would answer why the SAN says he uses 750Go of 750 GB, but Windows thinks there ish 300 GB free).

  Yes, that's correct... the recovery of unused/dead/removed space don't is not automatically made.

• Ability to store data about the free space is not the same in VMware and 3PAR

  Hello

  I'm running vSphere version 5.1.0 Server build 799731 and all my ESXi hosts running the same version: 5.1.0 799733.

  I use 3PAR as a storage system for my VMware environment, but on some of my LUN created, I get a different number on what is currently available as a free space on the LUN.

  On a LUN (LUN2_R5), vmware says that is has a capacity of 3 to and free pace on TB 2.08 (and it has been updated this morning).

  But if I look in my view of 3PAR system, the same number of unit logic (LUN2_R5) has a size of 3 TB, but the size of the user used in 85% (2.6 TB of data).

  If I do a look of VMware in the LUN, corresponds to the size on the LUN with the VMware view server, but I do not understand why 3PAR has another number.

  Can you help me?

  Kind regards

  Carl-Marius

  Your storage system only "knows" what's on the VMFS file system. As soon as the space is allocated, it is marked as used from the point of view to the storage.

  André

• Misdisplay the ability of the data store

  Hello

  I have an IBM Fibre Channel disk (table) with 3.64 TB of capacity.

  I create a data store to use all areas of this lun.

  But the ability of this data store is 1.64 TB, not Mr 3.64. And also, the value of the free space is bad either.

  What is outside the capacity display problems?

  Thank you.

  I think because the maximum size of the LUN to the CF's 2 TB less than 512 bytes.

  See the attachment for the maximum configuration.

  Concerning

• A Web site can store data for offline use without asking?

  In options, advanced, network, web content offline and the user data, I 'tell me when a website asks to store data for use in offline mode"checked

  And then in the box below that lists Web sites that are allowed to store data for offline use there is an entry "https://forecast.io".

  This site never asked me to store data offline, and I never did anything to him. The website showed there before, I removed it and now it's back.

  So, since I have the box checked to tell me when a site asks you, means that there is not just ask?

  Yes, a Web site can store data for offline use without asking and can do even if you have checked the option 'tell me when a website asks to store data for use in offline mode', because this option does not work correctly. See the bug: https://bugzilla.mozilla.org/show_bug.cgi?id=959985

  As far as I know, it does not mean that the site simply "did not", it's just that the option does not work (or maybe only works in the case where the data are larger than the pref in offline mode - apps.quota.warn?)

  The workaround given by cor - el above, must currently off - apps.allow_by_default set to false.

• When the Profile Manager stores data profiles created?

  I have several profiles of Firefox that I created with the Profile Manager, but I find no where the Profile Manager stores data for profiles created because even if I delete all the firefox location of C:\Users\user\AppData\Local\Mozilla user data files and all the data in the registry though Firefox I start the Profile Manager still lists all created profiles.

  Then, where the data for profiles created is stored?

  Hello, these data are stored in subfolders of \Mozilla\Firefox\Profiles\ C:\Users\user\AppData\Roaming- profiles - where Firefox stores your bookmarks, passwords and other user data

• When Adobe flashplayer wants to store data firefox won't let me respond to the dialog box? / flash player fiadobe settings dialog boxes not reponding

  After you install Adobe Flash 14.0.0.0.25 when I go to a site that wants to store data locally, I am presented with a dialog box that gives me options: allow, deny, specify the isite. However, no matter what I click nothing happens. It's almost as if Firefox is not 'see' the click. I went into settings Adobe manage and added that the site as being approved, but it did nothing...

  Best is to allow a Flash local storage in the world and use the default values.

  See also:

  Flash Website storage settings panel:

  • http://www.Macromedia.com/support/documentation/en/flashplayer/help/settings_manager07.html

  Global storage settings panel:

  • http://www.Macromedia.com/support/documentation/en/flashplayer/help/settings_manager03.html

• Need help to store data

  Hello. I came here for advice how to store data. What I'm trying to do is to take the gains given by my DAQ and store all in a table as it is acquired in an organized manner (3-columns, with a time stamp.) So far, I looked at writing text .vi and write on the worksheet, along various other fired that I found here, and I was not able to answer to my problem. Helping to Write the text, I was able to record things in text format and add future data to them, but I ran the problem do not know how to add commas to keep organized and give the time (I'd love for the data to look at as the writing text file charges of).

  I could not write to the spreadsheet yet executed, that until very recently, I not was able to get rid of all the errors preventing from running, and I can not test it right now, but I prefer to have everything in a text format, such as the lack of the computer I use Excel.

  Hello

  To format the data you have in your table, you can use the table to spread sheet vi string to convert the data to a table in a text format... check this vi

• How to store data in slot - VI for the next race

  Hello

  I read a file csv and data read from the file in the form of tables (about 170000 pieces).  I'm processing the data in a Subvi.  Several times, I call the Subvi main VI treatment.  Because it takes a lot of time to read the file each time.  I'm storing the berries in local variables and when I call the Subvi next time, I read the data in local variable instead of reading the file.  This reduced the manyfolds execution time.  Since the applocation doesn't face crisis of memory right now, I don't deal with any problem.  But I don't know what happens when the application is running on the system with less RAM.  Will be the local variable be deallocated (which makes it unusable applications), or he will throw all memory error?

  Is there an other way better to store data in slot - VI that can be used the next time when it is called (without all the main data VI)?

  Hi Laurent,.

  See the attached screenshot of LV help for the effectiveness of the memory of the different elements of pass-through of LV

• Store data in a buffer of Labview

  Hello

  I was wondering if labview allows you to store data in a sort of buffer or temporary memory to wait all the complete test and then export them to excel using the report generation tool?

  If possible, I would like to know how can I implement, because I'm using the report generation tool, but it takes too long to open and close excel for each test record data.

  Thank you

  Hi lngenu,

  You can do this by using shift registers. Please go through the attached vi for more information.

  Kind regards

  Amine31

  (Give congratulations to good answers and Mark as a Solution If your problem is resolved)

• automatic change of files to store data

  Hello

  I have a stand-alone system that works with 7 serial ports.

  I need to store a huge amount of data (115,200 Kbaud / port) because the system must continue to work for a week.

  In two days, I have a file size of over 500Mbytes. The problem is that I'm storing the data in a .txt file and then, when I want to the process, with the data, the computer laptop can´t open a file so the size.

  I can´t find a way in which the vi can change in real-time (himself) the file to store the data.
  Maybe the way is to create 3-4 files before the while loop (in which I read the data), and then change the file in which to store the data, but I can´t find a way to do it. With the get_file_size.vi that I know when I need to change the file, but how I have to do without leaving the whole loop? In my view, necessary to ensure that the visa_read.vi works...

  maybe better or another format or way to store data?

  It does not matter of data loss while changing the file.

  Someone at - it an idea?

  Thank you

  A quick...

• When I try to use the Windows Update link for my XP computer I get a message indicating that the location where the Windows Update stores data has changed and it needs to be repaired. How can I solve this problem?

  When I try to use the Windows Update link for my XP computer and after using Windows Mr. Fix - It, I get a message indicating that the location where the Windows Update stores data has changed and must be repaired. How can I solve this problem?

  I'm not that computer literate and do not understand what needs to be fixed.

  This problem just started a few weeks when I noticed that I had any recent download automatic update that I regularly get. So I tried to do it manually through access via my control panel.

  I use ESET Antivirus Node32 software.

  Hello

  1. What is the error message or an exact error code?

  2 have you made changes on the computer before this problem?

  3. you try to check the updates?

  I would suggest trying the following methods and check if it helps.

  Method 1:

  Reset Windows Update components and then try to download the updates.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: http://support.microsoft.com/kb/322756

   

  Method 2:

  File system scan tool checker and then try to press Ctrl + Alt + Delete and check.

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe):

  http://support.Microsoft.com/kb/310747

  Please respond with more information so that we could help you more.

• It is a group policy setting that allows Silverlight store data for a roaming profile user limited account?

  We have customers that use our Silverlight application. Application off because errors that the software is not able to store data about user roaming profile folder. So far, developers have a setting which allows the application to be listened to, but that makes it real slow. We try to get out of that. So my question is there a group policy setting they are system administrator can setup to allow Silverlight to store data for a roaming profile user limited account? Maybe allow data to be written locally only to the specific folder that requires Silverlight?

  Thank you!
  Carlos.

  Hi Carlos,

  ·         Are these computers on the domain?

  If the computers are on the field then I suggest you to ask your question on the Microsoft TechNet Forums.

  Windows XP IT Pro category

  If this isn't the case, you can post your question on the forums of Microsoft SilverLight.

• How do I to the previous screen in android using phonegap and store data in ios

  Hello

  I use phone of gap technology, in android how previous screen.actually go, I used navigator.app.backHistory () orwindow.history.back () ' its fine for blackberry or ios .but does not not in android... Please suggest...

  Question 2) how to store data in ios?
  I used (window.localStorage, it works very well with android and blackberry not ios.why)
  Thank you

  Hello

  I think you'll have more chance of Phonegap Google Group for your Android questions as everyone is here to help specific BlackBerry.

  https://groups.Google.com/Forum/?fromgroups#! Forum/phonegap

• store data when no database

  Hello

  I have a problem on the data store when there is no database.

  first of all, I will write a file (not as a single file)

  Secondly, there are a few pages in this file

  Thirdly, there is some content in each page

  I'll look at all of the files that I want to but I don't know how to store data and use of these data.

  Thank you.

  Both persistent store and files SD Card connection will do what you want to do, but not for free, you have to deal with yourself.  As an example of implementation, in the persistent store, you can establish a relationship of object with references to the data included, alternatively on SD card, I suspect that the best way is to have several files and use a 'link' as a mechanism similar to the link between the html files.

  So whatever it is, you have to do, it is which of these options you want to choose.

  That decision will depend mainly on the size of the data allowing you to manage, and to a lesser extent, the performance you need.  Older data must go on SD card, but this will slow down the performance.