How do I to the previous screen in android using phonegap and store data in ios

Similar Questions

• How to return to the previous screen on Pre apps? THETE´s no back button... just close the application and start over?

  for example with text messages once im in a conversation can how to return to the screen with all my converdations? It's the same with any of the apps, West no way to go back? should I always close the app and start again to go to the previous screen?

  You must not yet be aware of the gesture «back» It goes like this, the straight shot, left on the gesture area (the area below the screen, left and right of the Center button). You enter only at half way, and you can start on the right edge, or just left of the Center button.

  Become very familiar with this gesture he used all the time.

  There is also an option that you can activate by allowing a complete sweep in any direction will take you to the adjacent open card. I think that this gesture is set to off by default.

  Good luck.

  PS - In the application of Navigation of Sprint, I can't seem to leave the navigation once it starts. In other words, you must close the application and open again to define a new topic. I know two ways to issue the command to stop the navigation, but none of them work effectively.

  Message edited by Mrolesen on 21/06/2009 20:17

• How to navigate to the previous screen (as opposed to the previous page)?

  Hello

  I looked in the manual online where the back to the previous screen"" button. I can't find that, but I saw that "previous screen" is listed in the list of keyboard shortcuts. The keystrokes for this command are separate from those to go to the previous page. If I navigate to a page via a hyperlink, I want a sequence of button or the button to return to the page containing the link hypertext, not the previous page.

  Here are the shortcuts:

  Previous screen: PG. Prev or shift + enter

  Previous page: arrow left or Ctrl + PG. Prev

  So on page 41 in my document, I have a list of hyperlinks to the pages in the section. I click on one of the links and it takes me on page 77. Now, I want to go back to the list of topics, so I tried all four of the keyboard shortcuts, and they all were doing exactly the same thing: they all went to page 76. How can I navigate directly to the list on page 41?

  Application: Acrobat DC STD, bought in 2015.

  OS: Windows 10

  Thank you

  Joyce

  It's the "previous view":

  

• How can you restore the previous character that you used?

  Nice day!

  I accidentally clicked another character and it moved quickly, how to restore my previous character. I couldn't find something like
  "My characters" so thank you

  In order to switch to another character that you had previously installed, follow these steps:

  1. Go to Tools , then click on Add-ons (or click on the Firefox button in the top left, then click on Add ons).
  2. Switch to the appearance tab. You should find your personas previously used in the list.
  3. Find the one you want to use and click on the Activate button.

  To uninstall the other you can click on the button delete on them and they will be uninstalled immediately.

  Tobbi-

• How can I get the Photo screen saver to use sub folders?

  In XP, it would display all the photos on the hard drive, or if I chose "My pictures" he would use all the photos in this main folder, as well as all photos in sub folders. With Win7 I can't get to use the photos in a specific folder. IIRC, in XP, you can even select the files to include and exclude?

  My HD is partitioned and I use C: for OS and programs and D: for docs, FYI.

  It's working now. I have a click with the right button on the D: drive, wriggling on "Include in the library" and clicked on "Images". Not positive this is what fixed it, because I'm not sure how to UN - include it in the Library A - b test. But as long as it works...

• How do you see the System.out.println (without using Eclipse and BlackBerry JDE)

  Hi all

  I just want to know if there is no solution to see System.out.println.

  I use neither Eclipse nor BlackBerry JDE for my development.

  I have my jar, jad files. I convert my jar file using the CAP tool. The .cod files are generated.

  I start the trainer. Now I have 2 windows: Windows Simulor and the output (see picture).

  Then I load my .cod files. But I see not all System.out.println ("...") in the output windows.

  

  How can I see these System.out.println ("...")?

  Please help me.

  Thank you all.

  Thanks for your help.

  I try your solution EventLogger.

  But I have another problem:

  My request is not a native application (it is a midlet in J2ME, not a UIApplication). Do you think that it will work with EventLogger?

  How can I make a registry for EventLogger:

  static boolean	register(long guid, String name)  Registers the name and the guid of the calling application.
  static boolean	register(long guid, String name, int viewerType)

• How to revert to the previous version. Last update makes the new windows appear less of a complete new window should appear.

  I have my system tell me when a new update is available. Happened today. I downloaded the latest update. My Firefox now sits at 38.0.1.

  I use no legs. I want a new separate window for all that I opened. Since the upgrade this morning... when I open a new window, it is fine. But when I click on something in that window when a new opens up and it doesn't seem to be an entirely new window. There is no tool bar and it doesn't seem to be a way to have displayed toolbars. So I have no control over this new window except to reduce to a minimum or nearby. That's all. It does not appear as a tab either.

  It sucks! This was?

  How to return to the previous version before upgrading this morning? Otherwise I'll have to find another application to use other than Firefox, because I don't like it at all.

  Thank you

  ksburrus

  Another solution is to modify some hidden settings related to windows dialog style. Should not you make changes to the way you use Firefox, but sometimes you need to enlarge some small pop-up windows that have been sized for a window with no toolbar displayed.

  Here are the steps:

  (1) in a new tab, type or paste Subject: config in the address bar and press ENTER. Click on the button promising to be careful.

  (2) in the search above the list box, type or paste feat and make a pause so that the list is filtered

  (3) for each preference that begins with dom.disable_window_open_feature. , if it is not 'true', double-click it to true.

  You may find that you prefer this anyway, given that sites can band is more these pop-up windows features.

• How to return to the main screen after watching downloads?

  This such a stupid question, but I have forgotten how to return to the main screen after watching downloads.

  Close the window or tab to download (if you are using some addon) or only to change the tab:

  • Use the tabs to organize a lot of Web sites in a single window

  Downloads:

  • Find and manage downloaded files

• How to return to the previous version?

  I hate this UI! How to return to the previous version?

  I don't know if it's course, but here's the January release: http://ftp. . Mozilla org/pub/mozilla. org/mobile/releases/10.0/Android/

• In the latest version of MF, there is a missing button, who was in the previous version: between backward/forward buttons and the bar hits there was little flash, who showed a few recent pages I just went through. How can I restore it?

  In the latest version of MF, there is a missing button, who was in the previous version: between backward/forward buttons and the bar hits there was little flash, who showed a few recent pages I just went through. How can I restore it?

  If you mean the drop marker so you can always get history buttons front and rear, if necessary by left clicking and for a second, or by right-clicking on them.

  If you want to continue the brand drop there too there is that Extension to https://addons.mozilla.org/en-US/firefox/addon/backforward-dropmarker/

  Also the abbreviation for Firefox is Fx

• I installed Firefox 4 Mobile on my N900, but I am not satisfied. How to return to the previous version?

  While Firefox 4 is a commuter application, it does not play Flash videos and there is no add-on for this and so she won't let me watch videos on various news sites I visit.

  Supported the previous version of Firefox Mobile made a version of Flash that was enough to play Flash videos, but I can't find the previous version of Firefox anywhere on the web.

  My question is: How can I install the previous version of Firefox mobile on my N900?

  To enable Flash in Firefox 4.0 for N900:

  1. Enter about: config in the address bar and press return.
  2. Find the preference "plugin.disable".
  3. Press the rocker switch to set the value "false".

  If you want to download the previous version, you can find it here:

  http://FTP.Mozilla.org/pub/mozilla.org/Mobile/releases/1.1/maemo/

  (Choose your language, for example "en-US" is English us.)

• How can I remove the Bing screen? I uninstalled Bing, but it appears again every time as I start Mozilla Firefox.

  How can I remove the Bing screen? I uninstalled Bing, but it appears again every time as I start Mozilla Firefox.

  original title: Bing appears when I start firefox

  Hi RowingRVer,

  ·         The issue is only with Firefox?

  ·         What are the States of pop-up message?

  You can try to use Internet Explorer and check to see if the problem still persists.

  If the issue is only with Firefox so you can contact Firefox Support for assistance.

   

  Firefox Support Forum

  http://support.Mozilla.org/en-us/questions

  Let us know the results.

• How can I recover the previous games loaded (Freecell, Spider, Pinball, etc.) on Win XP/SP3 in the start menu

  How can I recover the previous games loaded (Freecell, Spider, Pinball, etc.) on Win XP/SP3 in the games from the start menu. Somehow they must be deleted. If I go to the disc cleaner and click on games to again install it says for me to show the way to C:\i386 and something zclientm. I hope you understand my explanation.

  Hello

  I'm happy to help.

  See you soon!

• How can I stop the "Splash Screen" to appear please.

  Hello
  I have two monitors, model S230HLbd. How can I stop the "Splash Screen" to appear please.

  By Splash Screen, I mean the 'Acer' and 'Energy Star' logos that appear when you turn on the screens. I think they slow down the display of what you want to see.

  There is no way to stop the boot process.

• I uninstalled the touchsmart from hp on vista and then tried the system restore, dad will kill me, how can I get the touch screen to work again?

  I uninstalled the touchsmart from hp on vista and then tried the system restore, dad will kill me, how can I get the touch screen to work again?

  Hello

  You have a specific question for HP, it may be better if you ask in the Forums of HP's Support.

  http://h30434.www3.HP.com/

  See you soon.