Abnormal (?) rownum

Similar Questions

• Safari came out abnormally: Bus error running under El Capitan

  Processor 1.6 GHz PowerPC G5 machine

  El Capitan of OS X 10.5.8

  Could not launch Safari, get the following message: ".com.apple.Safari [371]) came out abnormally: Bus error."

  Time Machine has never been setup (so I can't restore from time machine).

  Tried to re - install the OS X El Capitan: reboot 'Command & R' key does not work (just restart the computer as usual). Using the key Options on the re-start appear three icons in the middle is the OS X disk icon (by clicking on it or by double-clicking on it doesn't do a thing), below left is an icon reload (a semicircle arrow, re-load OS X a drive icon), below right a right arrow pointing to the right (this brings back you to the normal running user mode screen). Cannot get any menu to launch the reload of the OS X.

  No idea what I'm doing wrong?

  The El Capitan OS X can be loaded on a Flash DRIVE or a DVD from another machine and then loaded on the computer problem?

  Thanks for all the points or help you.

  Wait, 10.5.8 is not El Capitan, 10.5.8 Leopard & the hifgest that you can run on a G5.

  Usually the PPC Macs as G5s cannot start OSX USB, although there may be a work around Open Firmware.

  CMD + r only works in 10.7 & upwards.

  See if it works...

  Startup, (now shift key at startup), run disk utility in Applications > utilities, then highlight your reader, click on repair permissions, restart when done.

  (Secure boot can remain on the gray radian for a long time, let go, he tries to repair the hard drive & clear the caches)

• When he puts an end to Firefox 3.6.6 firefox.exe continues to turn, visible in the Manager of tasks (XP) and stimulates the activity of the CPU up to 60% with the danger of overheating. Have not found an appropriate response with the search term "abnormal

  When he puts an end to Firefox 3.6.6 firefox.exe continues to turn, visible in the Manager of tasks (XP) and stimulates the activity of the CPU up to 60% with the danger of overheating. Have not found an appropriate response with the search term "abnormal termination of the program."

  This has happened

  A few times a week

  is after update of Firefox 3.6.4

  I have the same problem with Firefox 3.6.6 except that it also consumes massive amounts of CPU during the race. This version also adds a new process on your system. I am running XP and in the beginning I tried to disable some plug-ins. Always consumed too much memory. I went back to version 3.6 and the new process went, and the CPU consumption is way down. Something is wrong with the latest version of Firefox, I never saw behave this way. Revert to a previous version (Filehippo) and you will see the difference.

• HP Photosmart C6180 with abnormal shutdown Message

  My HP Photosmart C6180 began to make a loop of continuous restart with error of abnormal termination. I've now tried # and 6 at startup to do a reset, but that only solves the problem for about 30 minutes.

  I read on other forums on the internet that this is due to faulty capacitor anyone else managed to solve this problem?

  I notice seven other users seem to have this problem on the forum.

  TTL79 wrote:
  

  I have the same problem. Is it possible to fix once and for all?

  Hi, yes I managed to fix my printer and it is working normally again! However, it is a bit complex - I had to remove the circuit board and replace the capacitors. I put the instructions on this site below as a method step by step for fixing.

  http://www.roshgaind.com/?p=200

  You will need to have a soldering iron, torx screwdriver and buy new capacitors. The whole process takes about 1 to 2 hours, I had limited experience with soldering, but I am familiar with disassemble computers.

  Attempt at your own risk - soldering irons are very hot and can cause injury if not done properly this can permanently damage your printer If in doubt ask a service center to fix your printer or buy a new one.

• Satellite P850 / 02C "Shut down" causes the reset and commissioning in an abnormal state

  My laptop P850/02c meets Shut down by resetting and return upward in an abnormal state.
  Abnormal state is that wifi is connecting is no longer an error message comes up - which I assume never happens to Microsoft.

  The machine is running 64-bit Windows 8 with the latest Windows updates and is two weeks with this problem that may occur on the first day.

  After advice from the dealer, I now tried shift while selecting Shut down - it works, the laptop shuts down as it should.

  Does anyone know how to solve this problem so that the laptop responds correctly to Shut down?

  See you soon

  Phil

  > After advice from the dealer, I now tried shift while selecting Shut down - it works, the laptop shuts down as it should.

  This procedure completely stops the laptop

  The point is that Win 8 past in hybrid mode, choose the option stop in the charm bar
  To completely turn off, you must press SHIFT + X and have to choose Shut Down.

  Here are more details:
  + Perform a complete shutdown in Windows 8 +.
  http://APS2.toshiba-tro.de/KB0/TSB2B03EY0002R01.htm

• HP officejet pro 8500 has 910 with windows vista to abnormal termination that don't resolve

  My printer was given to me and will loop continuously: it starts and displays the progress bar, operates the head printer port.

  poster 'abnormal termination' and stops and resumes the same loop again and again. I tried both the soft reset and hard reset with no results or editing, he keeps just loop. I checked for paper jams, removed covers and clean the printer replaced the cartridges of ink and cleaned printer heads, made a complete Visual inspection, nothing helps. (I'm a computer technician).

  I am at a loss here and any help would be greatly appreciated!

  Thank you!

  Well, I received my new adapter (the correct one) and it solved the problem! Only now I have a jam to carriage of mystery that I will work on next.

  I'm going to mark it as RESOLVED, because it fixed the issue I was addressing. Yep! Make sure you have the right adapter.

• abnormal termination

  Photosmart HP 6510 - instructions on the screen for the transport jam, I have now subsequently get abnormal shutdown at startup message and message transport jam later. Can see no obstacles but I can't erase a message and I am unable to print.

  jjts,

  The abnormal termination could have any number of causes (flicker of power etc.), unless we him Let's happen, we may be able to ignore it for now. However, this article should address the transport jam and back you on track. Give the steps a shot and let me know the results:
  http://goo.GL/gjLou

  Good luck!

• Output digital NI 6224, acting abnormal when the PC off.

  Dear all,

  I use NI 6224 to control cylinders, light turn and etc.

  Just output port Act abnormal during PC power off, and it return to its original position, which he assumed to be when PC power on.

  Is where all the parameters available in MAX be able to solve this problem?

  Thank you.

  Anson,

  The PCI card is powered by the PC.  When the PC is turned off, the card has no power. Without power, it is in an undefined state.  Most likely, it presents an impedance moderately high what whether at its release.  If external devices by default entries = high when not actively pulled low (which is the case for the TTL), then the power off of the State of the 6224 may resemble high logic for external devices.

  There is no way that the PCI-6224 (or any other logic device standard) can control his outputs when it has no power.

  If these devices may still have power when the computer is turned off, then you need to add a couple of circuits integrated between exit security digital and external devices.  The details depend on what these devices require, how fast you need to disconnect and other factors.

  Lynn

• HP Pavilion dv6 Notebook: abnormal noise out of the body of the laptop

  HP Pavilion dv6 Notebook (bought year 2009 I was working in Qingdao in China as corporate PC) has started making a noise when using, it started about a month there is early December.

  I tried restarting several times but its abnormal continues and I am concerned about it a lot--feeling that it will be broken, sooner or later.

  Sound is like coming out of the rotating hard disk not smoothly, but very difficult to... not too big but very irritating...

  Can you help me what I do to fix this noise?

  Hi @SHKeum,

  Thank you for visiting the Forums HP's Support and welcome. I read your thread on your HP Pavilion dv6 Notebook and the fan works not properly.

  Try later in this document on an overheat could be at the origin of the fan not working do not or no longer work. If the laptop has dust on the fans, it might be overheating and noises.

  Here is a link to restore the BIOS. Restore the BIOS allows an incorrect update on the BIOS that could cause the fan noise is harder.

  Here is a link to how to make a hardware test .

  I hope this helps.

  Thank you.

• I want to run ams 4.3 on my laptop and it says end abnormal program, what could be the cause

  After you have installed ams.4.3 on my laptop if I want to run it, it says end abnormal program, what could be the cause

  Hello

  1. what operating system do you use?
  2. have you checked if this program is compatible with your operating system?
  3. What is the full and exact error message?

  Please answer these questions that might help us helping you better. If you use windows 7 or vista you can try to install this program in compatibility mode and check.

  Reference:
  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program
  http://Windows.Microsoft.com/en-us/Windows7/install-a-program
  http://Windows.Microsoft.com/en-us/Windows7/what-is-program-compatibility

• KOTOR 2 execution runtime error: abnormal termination of the program in Windows 7.

  Original title: GOD HELP

  I run windows 7 and I installed star wars KOTOR 2 sith lords...

  I opened the game from the menu and press play and this message appears

  error when starting

  endpoint abnormal ptrogram

  I tried the patches updates and running in fashion styling program and nothing works

  Please help its killing me here

  --------------------

• abnormal termination of the program Microsoft visual c ++ runtime library error

  When I try to run the dawn of the war on my computer I get "error microsoft visual c ++ runtime library.

  Dow.exe

  "abnormal program termination".
  i ' v tried registry cleaners, updated library visual c ++ but nothing works. Help, please!

  Hi secretagentstv,

  Welcome to the Microsoft Answers Forum!

  I would recommend t try this method

  Try running the game in compatibility mode. Steps to follow:

  i. right click on the game (on the .exe file)

  II. click on properties

  III. click on the Compatibility tab

  IV. Select run this program in compatibility mode and select windows vista

  Link for reference below: make older programs run in this version of Windows

  As you have already updated to Visual C++, you can try check the game Web site if they have a patch available for it. Here is the link for reference: http://social.technet.microsoft.com/Forums/en-US/w7itproappcompat/thread/a60b9694-3f3b-404d-94fb-4f84c72fd076

  Thank you, and in what concerns:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Battle of abnormal termination of the program 2142 (bf2142)

  I have recently upgraded to Windows 7 Beta, I have had no problems running all my favorite games.  Once I've upgraded to Windows 7 Pro, I had some problems with games.  I'll stick to the subject and only discuss 2142.  After my Windows 7 Pro upgrade, I initially installed BF 2142 and new patches.  He played for a few days with no problems.  Then, I received the Microsoft Visual C++ Runtime Error "abnormal termination of the program."  I get this right after the splash screen for the program ends.  This is not a consistent error.  Sometimes, the game will run for days and then suddenly, without any installation or known Exchange I got the error once.  I tried rebooting, uninstall and reinstall the game, change the resolution options specified in the icon and other things.  Not really interested in blame it on the BONE or the game.  I just want to play my game on the system I built with consistency.    Really hope someone can help.  Thank you in advance!

  I suggest that you put your system in clean boot and see if the problem occurs.  With it being so random, it may be another program that is confilicting with BF2142.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• HP Envy 4500th: abnormal termination: black does not print

  4500th HP Envy printer gave "abnormal termination, possible damage" message only once , when I recently turned printer (I think that I had previously disabled the front strip of the printer had completed the stop).  Since then, (almost brand new XL cartridge) black ink prints--I can't make copies or print from a document.  I have unplugged, replugged connections, removed and reinstalled black ink cartridge.  Page of Test print head print color ink [perfectly but no black ink, alignment same page.]  I also clicked clean printhead, restoration or the faculty.  Should I try a 'hard reset '?    Or what?  I've been helping HP for 4 hours.  Staples has recommended uninstall then reinstall the printer.   All, it's very hard for this old lady-.    Printer is 19 months old, is more under warranty.

  Try here.

  http://support.HP.com/us-en/product/HP-envy-4500-e-all-in-one-printer-series/5304875/model/5304876/document/c03768188/

  Let us know.

• NI USB box problem when Labview ends abnormally

  Hi all

  recently, I had a problem with the NI USB box used in Labview.

  I wrote a very simple program and it runs in Labview 2011. Basically, it reads data from a NI USB box and also send data back. According to my knowledge (I don't know if it's good or bad), when the Labview is arrested shortly how it is completed, the USB box should also stop working. But the thing is, when the Labview program ends abnormally, let's say I directly terminate from the windows task manager when it is running, all the ports of the box USB will hold their final statements until I restart Labview and write new values to them.

  This could be very dangerous. For example, when I use the USB box to control the power of a power supply, the Labview program crashes (which happens often), the power supply box and USB power will continue to work until I restart the program again. I tried several different types of boxes NI USB on PC and the problem still occurred. So I was wondering if there is no mechanism that prevents such problems or if I can do something programmatically to avoid it.

  I thank very you much for your help and your time.

  Best regards

  Sun

  Sun,

  Another area where you can have a misconception: LabVIEW is not control USB DAQ device. The LabVIEW program called the DAQ driver program (typically DAQmx or DAQmx Base) and pilots say the OS to send messages via the USB port of the DAQ hardware. So stop the program LV, intentionally or accidentally, does not say the data acquisition driver and the OS USB driver to put the DAQ hardware in a State course.

  If you have a configuration where the LV program can be stopped before it can send orders "Safe state" DAQ hardware, you cannot ensure the DAQ hardware stops correctly.

  There are a few screws that have been written in LV "watchdog", but even those who depend on the operation of LV execution engine.

  You should carefully rethink the entire system, make security issue, one of the main objectives at the beginning.  Most likely, you will find that you need to a separate device, hardware clock or PLC, if the software fails to stop him.  You should also consider whether you need a real-time operating system to avoid some of the problems associated with the standard desktop operating systems.

  Lynn