About adding Ram

Similar Questions

• Confused about adding RAM for my computer.

  Hi, I have a Dell Dimension E310 hepatitis has. And I want to add 1 GB of RAM for my comp. However, by reading the instructions on how to install a part of comfused me: it says that "If you install a mixed pair of DDR2 400 MHz (PC2-3200) and memory DDR2 533 MHz (PC2-4300), the modules function at the slowest speed installed.
  Be sure to install a single module of memory in DIMM 1 connector, closest to the processor, before you install modules in the other connectors connector. ». So this means that i hav to get rid of my old RAM failure (2 chips equivalent to about 504 MB of RAM) and only install 1 new? In simple terms, can I install a chip of 1 GB of RAM (the an im about to purchase) on a slot and keep a 200 er something MB of RAM on the others (only 2 openings avaiable RAM on my computer)? If im see evil in my train of thought please tell me...

  Another question is grounded yourself from electrical static. Can someone please explain to me how to do that on 'unpainted metal. as you just rub your fingers er somehting about this "unpainted metal. wat is 'unpainted metal.

  
  

• HP Presario CQ60-211DX: Question about adding ram

  My moms HD took a dump and I'll replace it and update the ram.  After defining and entry model information site, she came back with a couple different options.  He says that I can use PC2-5300 or PC2-6400.  The PC processor is a Celeron 585 2.6 single core with a 667 Mhz FB.  As I understand it, requires PC2-5300 667 Mhz FSB of the processor?  (This is what I guess I)  PC2-6400 runs at 800 Mhz FSB?  I just think?  And what advantage would I using the PC2-6400 on the 5300 with my current set in place?  He said that the two are compatible and they are at the same price.  Help, please.

  Thank you

  Ricky Brown

  Your a chipset GL40, which culminates in the DDR2-667. Also known under the name of PC2-5300 (same thing). So you can install DDR2-800, but it will run at the same speed that is 667 mhz DDR2-667. If they are both the same price get the DDR2-667. DDR2-800 is generally a bit more available and a little less money, believe it or not, but apparently not where you found it.

• Mac Pro early 2008 adding ram problems

  I recently added RAM to my Mac Pro early 2008. The Mac Pro recognizes only 4 of 8 memory locations. I moved the slots and moved the memory and all slots and all the memories are good. No matter where I put them, or what memory I use, the Mac Pro will see 4 of 8. Any suggestions? Yosemite run 10.10.5, trying to fill all 8 locations with 800 mhz 2 GB DDR2 FB - DIMM.

  Ron

  How are new?

  Where have you bought the new?

  All new are identical?

  All the 'old' are the same?

  What is the size of the old and new?

• I want a NEW computer, but I want Windows XP on it. I don't like about adding new fangled to it. I just want to use my OLD stuff. Is this possible?

  I want a NEW computer, but I want Windows XP on it.  I don't like about adding new fangled to it.  I just want to use my OLD stuff.  Is this possible?

  Hello

  If you are considering buying new PCs, you can go ahead and buy Windows 7 Professional, Ultimate or enterprise. These editions of Windows 7 supports Windows XP Mode, where you can use all programs Windows XP. You can also use the Windows compatibility mode to run Windows XP programs in Windows 7. For more information, see:

  Buy Windows 7: main questions

  http://Windows.Microsoft.com/en-us/Windows/shop/buying-Windows-7-top-questions

• LaserJet2300dn: "disk not initialized" on HP4240N after adding RAM

  Hello

  After adding RAM 48 MB on my HP2300DN, on the control panel appear 'uninitialized disk '.  I tried to do a cold reset and replace DIMM Slot2 and Slot3, but without success.  Any help would be really appreciated.

  Specifications:

  Printer: HP LaserJet 2300DN

  1 DIMM Slot:

  Side 1: 8 MB Flash

  Side 02:48 MB of SDRAM

  DIMM location 2:

  Side 1: 1 MB of ROM memory

  Side 2: empty

  DIMM location 3:

  Side 1: 8 MB Flash

  Side 02:48 MB of SDRAM

  EIO 1: HP JetDirect J4169A

  RAM DISK storage: 45Mo

  FLASH storage capacity: 3 MB capacity

  Total memory 96 MB

  Hard drive: No.

  Model number: Q2475A

  Dmitry

  You probably confuse the printer. You seem to be using 2 DIMMS that are 48Mo and each also 8 mb flash. These chips contain the firmware in the flash section and the memory in the other. Since you're probably using a chip LJ2300 another dimm, you confuse the printer with 2 firmwares. You must use a barrette of memory 32, 64 or 128 in the 3rd slot. Only 1 chip 8/48 MB can be used in this printer.

• Flickering screen 17 Alienware r3 after adding ram

  I have a new r3 Alienware 17 it came with 8 GB of ram, I just added ram 2x16gb 2133 corsair.  When I put power back on the screen started to Flash, it is very pronounced in the office when I open the start menu.  I checked the BIOS is updated.  I put the old RAM in and flicker went.

  I checked that this computer is rated for 32 GB, so I wonder what I do wrong or if I need to update other elements to make this work.

  Any help is appreciated!

  Could be many things, software packages to the specifics of the hardware. We usually use Kingston, Toshiba, Samsung and Hynix.

• About the RAM, I have 32 GB...... is there any advantage to allocate a large amount of this, or is there a limit that really MAKES a DIFFERENCE...?

  About the RAM, I have 32 GB...... is there any advantage to allocate a large amount of this, or is there a limit that really MAKES a DIFFERENCE...?

  @

  It depends on what you are doing and the rest of your system.  Eventually, if you like the video, it will impact.  But for still images, it is unlikely you will come anywhere close to that.  You can check it by placing the bar at the bottom left of the screen to show effectiveness.  As long as you use only RAM it will say 100%.  If you go below, you use your drive to work.  But even in this case, use to scratch a little, if you have an SSD, is not a big deal.

  Even my laptop 8 GB rarely gets bogged down (but I close the old files).  My 16 GB Office doesn't happen nearby.  But I'm not video.

• Inspiron 530 - adding RAM

  Hello

  I want to buy a memory to my inspiron 530! Here > http://accessories.euro.dell.com/sna/category.aspx?c=uk&l=en&s=dhs&cs=ukdhs1&category_id=4325&mfgpid=1226170&chassisid=-1<- the="" 1="" gb="" module="" (28="">

  I read on documentation (http://support.dell.com/support/edocs/systems/inspd530/en/OM/HTML/parts.htm#wp1580857) when I install memory I need to remove the PCI Express x 16 card... I don't understand. I thought adding ram was simple and all you had to do is open the case, insert the ram and secure them correctly and then close the case. Start the pc and it's done.

  I know that my inspiron 530 can have only 4 GB of ram. I have 2 GB of ram for now.

  Is there something I need to know? Is there something different?

  Dell is not offering Win7 drivers for this model. I suggest you go here and read some of the links on the upgrade to Windows 7. Run the Win 7 Upgrade Advisor first to see what it says on your system.

  Without knowing what equipment you have (for example, video card, sound card, network adapter, etc.), it is impossible for anyone to tell you exactly what drivers you need. In some cases, but not all cases, Vista 64-bit drivers can work. The Vista 64 drivers are here. (Confirms that he says again Vista 64-bit upstairs when you load the page!) And if you use your Service tag (do not post here!) you can find a list of drivers installed Dell, so at least you will know what hardware you have, but keep in mind these drivers for Vista 32 bit.

  You can also go here for links to the hardware and instructions to install Win 7. And you can search these forums for discussions on installing Win 7 on the Inspiron 530 to see which other users may have met problems.

  Ron

• Please tell us about adding more RAM for my dell optiplex GX755

  I have this computer with an OGM819 motherboard and 2 GB of ram, can I buy more ram for this pc and do better, Dell said I could take up to 8 GB with 4 2 GB, that could help me and you would do. also should name of ram I buy. Thank you very much.

  What type of ram you have: see: http://uk.crucial.com/gbr/en/ it will scan your computer and give you a price.

• Satellite S50T-B - adding RAM and swapping HDD to SSD

  Hello

  I recently bought portable satellite S50t-B and have a few questions about the upgrade:

  1. What is the recommended RAM to add (8 GB)

  2. What is the DVAR to add?

  3 are there instructions for adding more RAM and an SSD for my laptop?

  4. I void my warranty by installing more RAM and exchanging the current hard drive for an SSD?

  Thank you for your help

  Can you please send name of full model of your laptop? (S50T-B-xxx)

• Windows Vista, adding RAM

  Hi im running Windows Vista SP2 with 4 GB of RAM so I play games on my PC because I have no consoles and bytime my computer will run slowly at the origin it is are the RAM came to put my PC's come with with only 2 GB of RAM so I bought a "ATI RADEON 5450" GPU with 1 GB of RAM I know that the GPU is not a total beast but with overclock, he was able to play up to 1600 x 900. He wasn't fast enough to fuly depict gameplay fast and annoyed that I was, I decided to buy a stick of 1 GB of RAM equal to 3 GB of RAM, so the next time I bought another 1 GB RAM and Vista has proved he is not recognized as showing only 3.22 GB of RAM but my BIOS showed 4000MB "a number with 4000 but I can not remember" it was weird because my BIOS did read the corect my Vista amount no has not turned out that I never had no new Service Packs so I added the SP1, it doesn't have the first 3 times I did Windows Update he installed several random things and I tried to install SP1 it worked, asked to contact successful activation to activate the product... Fun adventure hehehe... So now I have SP2 and since SP1 my PC reads 4 GB like it should him so now is it possible to add more RAM to speed up this guy even more? Whether or not please let me know thanks guys.

  Hello

  Vista 32 bit takes a maximum of 4GBs of RAM; with only about 3.22GBs is available for use.

  The rest is used for different hardware features and use of the system by the operating system.

  Windows Vista (32-bit)

  Ultimate: 4 GB

  Company: 4 GB

  Company: 4 GB

  Home Premium: 4 GB

  Home Basic: 4 GB

  Starter: 1 GB

  Vista 64 bit can be used much more RAM.

  Windows Vista (64-bit)

  Ultimate: 128 GB

  Company: 128 GB

  Company: 128 GB

  Home Premium: 16 GB

  Home Basic: 8 GB

  But at this point, your motherboard RAM capacity dictates how you can install the RAM.

  Running Analyzer RAM Crucial to inform you of the capabilities of your motherboard and the corresponding type of RAM, you must acquire.

  http://www.crucial.com/UK/systemscanner/

  See you soon.

• Questions about upgrading RAM on Satego X 200-21 L

  Ok. i've got the Satego X 200-21 L (as the Satellite X 205 except the screen resolution) and I want to upgrade my memory to work up to 3 or 4 GB.

  1 What is more profitable? An increase of 4 GB or 3 GB? I need it because Vista makes my Latptop very slowly sometimes, and for games.
  I've heard Vista only detect / 3 GB (I have a 32 Bit system) - is this true?

  2. where could I install and build in this helping hand storage work? What I have to go to a toshiba - authorized reseller or I could do in the next electronic market close to home?

  3 should I know something important about him - as a guarantee - it could run out if I increase my working memory?

  THANK YOU SO MUCH FOR YOUR ANSWERS!

  Hello

  You can upgrade your laptop up to 4 GB of RAM. The compatible RAM 2 GB module has PA3513U-1M2G part number. I heard that the problem in recognizing/3 GB should only be solved with SP1.

  Upgrade of RAM do not negate the warranty valid. It is also described in the manuals page 123 s user document. Check it out.

• Satellite Pro 4600: Question about upgrade RAM, CPU, motherboard

  Hello

  I have a SP4600 and because I love this machine, I want to give him the chance to stay with me - but unfortunately, it will only work by increasing its performance...

  Is anyone here has made some experiences in upgrading a SP4600 more than 512 MB of RAM?
  I know that this machine uses PC100 SD - RAM that is available up to 256 MB.
  But someone has tried successfully to put in PC133 memory? And if so, to were the limit?

  And more: what about the upgrade of the rest, for example, the CPU or the whole motherboard?
  Currently, his heart beats with 700 Mhz (Celeron). Would it be as easy as just another graft?
  Or would it be easier to exchange the whole motherboard?
  I've never done anything like this before and I'm not sure how the rest of the system can react on these interventions, in particular because the we-board-video and sound on board...

  I would be delighted if someone could give me some positive feedback on these issues...

  Hello

  You can only use the memory 100 Mhz modules because the FSB is limited to 100 MHz.
  If you use 133 Mhz modules, they will work only at 100 Mhz.

  You can upgrade the satellite Pro 4600 until 512 MB (2x256MB)
  http://www.orcalogic.co.UK/ASP/ProdType.asp?ProdType=28447&ft=m&St=3

  Other devices such as the CPU or GPU are not extensible and the motherboard may be replaced only with the same motherboard

  Finally, you should know that the laptop technology is a little different and you can't compare it with any desktop computer. You can update some parts such as the memory or HARD drive, but that s all the

• Question about upgrading RAM in Equium P200

  Are there disadvantages to the insertion of a 2 GB module (one of the 2 slots left empty) instead of insert two modules of 1 GB (so using the two slots).
  Also, can I insert two modules of 2 GB 4 GB total to give me?
  I have an express chipset Intel (r) 945. If I can, I should update the bios?

  Thank you in anticipation of an answer.

  Hello

  aren´t there are disadvantages - just install 1 x 2 GB module, if you hesitate. Alternatively, you can install 4 GB of RAM, but you won´t be able to use all of the 4 GB due to a limitation of the operating system.

  To learn more about the limitation of 4 GB, see this post:
  http://Channel9.msdn.com/ShowPost.aspx?PageIndex=1&PostID=42545

  Welcome them