AC monitor does not not because of the Lexmark Incompatibilty

Similar Questions

• Monitor does not work, and the also.when of keyboard that I turn on my screen a message appears saying monitor going to sleep, then it goes into sleep mode.

  monitor going to sleep, cant access windows because I have several times to get this message.

  Connect the computer to another monitor. If the problem goes away, replace the original monitor. Make troubleshooting even for the keyboard. If the problems do not go away, you probably have malfunctions in hardware on the computer itself. You can fix yourself:

  http://www.elephantboycomputers.com/page2.html#Hardware_Tshoot

  On tests of hardware failures often alleged swapping parts by parts checked. If you can not do the test yourself and/or are uncomfortable opening your computer, take the machine to a professional computer repair shop (not your local equivalent of BigComputerStore/GeekSquad). If possible, have all your data backed up before taking the machine into a shop.
  MS - MVP - Elephant Boy computers - don't panic!

• HP Envy: Monitor does not respond to the connection of Windows, so I can't access BIOS

  I recently bought a hp desktop computer and installed a Sapphire double-X 270 of R9. After installation, I noticed six long beeps BIOS at startup. I have this attached to caused by the UEFI who need Legacy mode. The real problem here is that I can't get to the BIOS, my keyboard and the monitor do not respond until it starts with windows sign in screen. Until then the monitor is in standby. The same thing happens if I boot from the BIOS through windows. I have 10 windows to be clear. Here is the pc http://www.officedepot.com/a/products/848252/HP-Envy-Desktop-Computer-With-6th/

  Remove the new graphics card and the original graphics on Board allows to boot in the BIOS/UEFI. Change your Legacy for UEFI, install your new graphics card and you should now have access to the BIOS/UEFI during the amorçage using the new graphics card.

  Don't know if your original post on six beeps at startup meant that you had already tried to start with the new card in UEFI mode but that he was still unable to see anything pre-seed?

• interactive report in APEX does not, because of the function "allowed to read.

  Hello
  
  I discovered that an interactive report does not work due to the permitted reading function.
  I have oracle 10.2.0.3 (database and analytical workspce Manager).
  I installed the overall sample to AWM.
  I've updated the spfile (setting an Always).
  
  In a query against the table of product_dim the APEX gives: no records found. In SqlPlus or SqlDeveloper returns 36 lines.
  
  At the TOP, I installed a workspace on the overall scheme.
  
  I read on the read function, effective for the product_dim table permits.
  
  How to solve this problem: paying (and how) the APEX and the environment, of removing permission read function?
  Or removing the IsInvisible column?
  
  Where is this feature?
  
  Any response will be appreciated.
  
  Leo

  Can you post the SQL, you use by APEX?

  Try using this:

  SELECT... from table (OLAP_TABLE(' GLOBAL.) An OVERALL duration session '

  Thank you
  Brijesh

  Published by: Brijesh Gerard on October 28, 2009 15:53

• Application that was open on the second monitor does not open on the main screen without the second monitor attached

  At my office, I have a second monitor. One of my apps has been posted on this subject. I think I left the application; disconnected the monitor; and stop Windows XP.

  Now, my application wants to open on the second monitor which is not present.

  Is it possible to open the laptop monitor? Charles Allen Managing Consultant BKD Technologies

  Start the application, right click of its mosaic in the taskbar and click move .  Use the arrow keys to move to the first monitor, and then press enter .

• Monitor does not work during the recovery after the night before

  A few weeks ago I started having a problem where, after falls of PC mode 'sleep' (or I put manually), recovery... the monitor fits 'no signal', while the PC itself looks and sounds like he turned on.  I am running Windows Vista Home Premium and have updated with the Service Pack 1 - which did not help.  If I manually quit the PC and reboot - everything turns on and works fine.  If this will be as a kind of software problem.  Pls help...

  Hi Jofano,

  1. did you of recent changes on the computer?

  I suggest you to install the updated drivers for the graphics card installed on the computer by visiting the card manufacturer or the computer manufacturer's website, the Coachman, if it helps.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

   

  If the previous step fails, look in the event viewer to determine the cause and after return with details.

  What are the information contained in the logs of the event (Event Viewer)?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-Viewer

   

  I would also say that you update your computer with the latest service pack for Windows vista.

  How to obtain the latest Windows Vista service pack

  http://support.Microsoft.com/kb/935791

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Portege R500: external monitor does not work with the Port Replicator Port 2 and DVI

  I have a Portege R500 running Vista with a slim Port Replicator II and digital monitor Viewsonic.
  I connected the monitor to the DVI port on the port replicator and got it to work OK.
  Press fn + F5 would switch between the computer screen and the external monitor.

  Then it stopped working, and I can't make it work at all. F5 recognizes just the laptop screen.

  If I connect an analog display, it is fine, and I can pass between the two screens without difficulty.

  The strangest thing is that, if I reboot when the Portege R500 is docked, the digital monitor begins by displaying the boot sequence, but then the signal is lost as soon as the screen stops the display of the progress (in low resolution) bar.

  I spent an hour on the phone to support Friday, and he made me nowhere.
  They finished by saying that he should never have worked! So what is the DVI port because then?

  Any ideas?

  David

  Connect your monitor directly to your laptop and see if it is recognized and you can go through FN + F5 between the two views.
  If it works, then connect with port replicator, and then try again.

  It's probably best if you reinstall display drivers. Maybe there are new too on the download page.

• Firefox does not start after the 3.0.1 update

  I have Firefox 3.0.1. I would like to upgrade to 3.6, but if I try to upgrade to any version, I can't open Firefox. It is not like the other problems "Does not", because in the Task Manager, firefox.exe appears, then disappears instantly. I tried in Safe Mode, do a clean install of uninstall Firefox and my profile, cleaning the registry, then using CCleaner, then try reinstalling but the problem persists. Sometimes firefox.exe is not even appear in the Task Manager. I can also use any version of IE (even if I wanted to), Safari or Chrome. They have all the same results. I suspect that this isn't a problem with Firefox, but with my computer, but I don't what is wrong. Can someone help me?

  This has happened

  Each time Firefox opened

  == I upgraded from 3.0.1

  Thanks for your tip on the killer of program. There was a program on my computer called Naomi Filter. I didn't know what it was until I saw this and he looked up. It turned out to be an internet filter which automatically closes the browser. I don't know why 3.0.1 works, but I deleted it and Firefox and Chrome work perfectly now. Thank you!

• F1503 - led blue monitor does not power available. Unable to turn

  Hello

  I had my f1503 monitor into storage for a while and it finally worked its use. Properly connected all power and PC connections and changed the tension but no blue led light work and impossible to turn on the monitor. Checked the power adapter - green led on the power and 12,33 volts transformer showed at the end of the output of the power supply monitor.  The monitor plug was inserted into the grip. Help, please?

  That the monitor has a fuse that needs to be replaced?

  Hello Bruce123456,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I understand that you are having problems when your flat screen HP Pavilion f1503 monitor does not come. The problem you describe seems to be a physical problem, and I think it would be better if you contact HP Support for service options.

  I want to thank you for display on the HP Forums. Have a great day!

• WUSB54GC - WLAN monitor does not not on Windows 2000 SP4 computer laptop

  I have a WUSB54GC v3 and I tried to install the drivers and the WIFI monitor on a Gateway Solo 5300 laptop running Windows 2000 SP4.  When I put the disc, the installation automatically started, but stopped after a few seconds with a pop message saying, "this version of windows is not supported" (or something similar to that).  I read in this forum and learned how to manually install the driver from the disk I did.  I checked the device using troubleshooting in Device Manager and shows the driver to be installed correctly and the device works correctly.

  My big problem is that the monitor WLAN (the little green square in the bottom right of the screen) will not illuminate.  There are no available wireless networks and the monitor does not respond to the "Refresh" or anything else.  It seems to be "dead".  How can I get the monitor to work?

  Thank you!

  Mike

  WUSB54GC is not compatible with Window2000... So either you can upgrade your operating system to Windows XP, or you can go for different cards as WUSB54G.

• Dell monitor does not stay on

  * original title - my monitor does not work *.

  OK so I bought this computer about 4 years ago and it worked just fine until when I tried to turn it on this morning it does not turn on. Then I tried again and it was the case, then half an hour later he died. After that, I tried to put it on the back again but this time, when I press the button it lights but when I let go of it, it turns off the coast. I tried unpluging but it does the same thing.

  My Dell flat screen monitor

  The computer does not work

  Also I umpluged computer from the monitor and the same thing happened

  Help, please

  Hi Uther 9,.

  If the monitor does not remain during the self test, it is defective.

  * Turn off the monitor
  * Remove all cables from the computer monitor
  * Turn on the monitor
  * The floating red/green/blue/white dialog box should appear on-screen on a black background and stay on

  However, it seems that you already have, is most likely a hardware problem:

  http://support.Dell.com/

  Thanks and good luck!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Monitor does not work after installing Windows 7.

  I have a Dell laptop with a Dell S1709W Flat Panel screen.  After replacing the Windows Vista came with the laptop for Windows 7, the monitor does not work.  The monitor said that he does not any signal from the computer.  The computer does not show that it has detected the monitor.  The monitor's cable and the connections are good.  What should I do to get the monitor to work?

  You have a graphic external connector for a secondary monitor, if yes attach it and then go to the Dell support web site and download Windows 7 drivers for your laptop model. Install the driver chipset first, then the driver graphics/video, network/LAN and drivers of the potential.

  If you do not have an external graphics connector, call Dell Tech support. They have a method to recover your system without losing data or applications.

  JS
  http://www.PAGESTART.com
  Never be afraid to ask. This forum has some of the best people in the world to help.

• HP Envy laptop monitor does not light

  Just bought this HP Envy with Windows 8 just over a month ago.

  Today, after the installation of an HP recommended that Windows Update the monitor does not light.  The power led is on the internet led is activated and the CAP turns on if you press.  Still no monitor.

  Bought it at best buy and it's a drive of 1 1/2 at this store if I have to take it to Geek Squad

  If you have windows 8.1 on it then it looks like the update of kb2903939 killed. I fight with this problem since Christmas.

  Power cycle the cell several times without leaving start completely. It should bring up a screen of recovery. If you can find the path to start safe mode, you can uninstall kb2903939 and then restart. That fixed my problem.

  Otherwise, it should be a call to HP or Microsoft support.

• The e-mail application does not connect to the Dreamhost servers. Perhaps because of how they configure their SSL certificate for their subdomains.

  http://wiki.DreamHost.com/Certificate_Domain_Mismatch_Error

  Certificate SSL of Dreamhost for their mail servers only at one level of subdomain while many of their clusters of e-mail exist on a second level subdomain. In my view, this translates into an error message 'bad security' of the e-mail application.

  I contacted DreamHost and they say they are unable to solve this problem, or that they will allow me to install an SSL certificate on my virtual domain pointing to my cluster e-mail (even if I had to buy a).

  I understand, it is possible to manually add certificates via adb in a way similar to this: http://www.pending.io/add-cacert-root-certificate-to-firefox-os/

  However what I read this: 1. does not work on the ZTE Open 2. Can only fix only navigation not the web mail client.

  Is there any option that is available to me short of switching hosts?

  Fabian,

  Are you familiar with Firefox OS? The reason why I say this is because the e-mail client cannot create an excaption certificate. In fact, it's design. It's design: https://wiki.mozilla.org/Gaia/Email/Features#Security

  This request for support to Mozilla was placed specifically for the product Firefox OS, for which there is only a single mail client.

  That said many people in the Mozilla Bugzilla, have been able to show me how to find another alias for those servers that actually works and in fact corresponds to SSL certificates. Although Dreamhost support could not provide me with any such information, and such information is not actually in the DreamHost wiki.

  I have a repeated insistence of Dreamhost possibility I should just live with the exceptions of SSL certificate, when there is real existing valid server names to match the certificates in question, silly.

  The fact that you post this solution for one product, so that it is not yet applicable beyond useless. It serves to muddy waters.

• Firefox has only display problems in the upper left region of only my Dell U3011 monitor; the monitor does not have these problems with any other application

  Some parts of the Firefox window are translucent, allowing the image of the desktop to show through. These regions are anything but great internet site central image which behaves normally. Unless the desktop is completely black this problem makes reading the tabs, address bar and the bookmark are difficult if not impossible. I encounter this problem only on my new Dell U3011 monitor. Firefox is the only application that has this issue on the Dell monitor. The monitor built into the laptop that animates the Dell monitor does not exhibit this problem. The laptop is a Lenovo W540 running Windows 7 64-bit. Thank you very much for your help. Steve Schupbach

  Hello stevesch

  first see : problem with Firefox going transparent troubleshoot and find a solution

  then with patience to see:

  questions/940393

  questions/940389

  questions/940374

  questions/940377

  questions/940384

  questions/940395

  Thank you