Acano server 1.9 error of handshake with Lync/S4B

Similar Questions

• "Error 105: connection with a token to MaxUni" error when you add a server Essbase

  I was sent Hyperion Planning and Essbase 11.1.2.3 with Embedded WebLogic HTTP server under Windows 2008 Server R2. Then I applied the patch #17767309 (this is for server EAS - free 500). Then after connecting to the EAS web console as "admin", I added a knot of Essbase server and then trying to develop it, I get nothing underneath and the following message in the box at the bottom: "error 105: connection with a token to MaxUni.

  I have stopped all services of the EMP, deleted "tmp" folder "Oracle\Middleware\user_projects\domains\EPMSystem\servers\AdminServer" / I redeployed EAS server and Essbase using the EPM system configurator - it is the sequel to advice found in this thread: https://community.oracle.com/message/11325472#11325472

  Then I restarted all services of EPM and logged on to the console of Regional service as admin, once again, deleted and added an Essbase server again and I get the same "error 105: connection with a token to MaxUni ' when you try expand the Essbase server node again.

  How can I solve this? I'd appreciate a lot of clues!

  I saw something similar bez Essbase RTC was not updated to match the version of Essbase and EAS server. Download and apply the 17767299 hotfix that is Essbase RTC 500. This should solve the problem.

  THX

  Vivek

• I can't reactivate my e-reader with my existing Adobe ID and password which are both correct. I alwayss get the message "the server activation Code error: E_AUTH_NOT_READY" what kind of problem is this and what is more important, how can I resolve it quic

  I can't reactivate my e-reader with my existing Adobe ID and password which are both correct. I alwayss get the message "the server activation Code error: E_AUTH_NOT_READY" what kind of problem is this and what is more important, how can I resolve it quickly. I'm on vacation and you want to read. Thanks for the quick response.

  Yes, actually I talk about digital editions. Do you know how to solve the problem, as stated in my first mail of Digital Editions? Thank you for your kind cooperation.

• plugin VMware update manager returns with "the remote server returned an error: (404) not found."

  Hello

  We have recently updated our virtual Center Server to version 4 and now when I try to download and install from the page manager plugin vmware update manager plugin is back with "the remote server returned an error: (404) not found"

  Has anyone had this problem before and eventually worked out how to fix this?

  Gregg Robertson, VCP, MCSE, MCSA, MCTS, MCITP

  You are welcome!!

• Firefox Version 27 Action Menu error in Reporting Services. An error has occurred with the extraction of data.

  Hello, since I've updated for Firefox 27.0.1 on Windows 7, I have a problem with Reporting Services on a Sharepoint site. It is a site of Sharepoint 2010 with SQL Server Reporting Services 2012 Sharepoint integrated mode. I was already on Firefox version 26 and didn't meet with this problem.

  When a report is opened and you use the Actions link on the Reporting Services toolbar, I get the following error messages.

  An error has occurred with the extraction of data. Please, refresh the page and try again.

  I tried updating to the beta version of Firefox 28 but the same error occurs. I see that someone else is having the same problem here. http://SharePoint-community.NET/forum/topics/reporting-service-and-Firefox-27

  Any help would be appreciated. Thank you!

  Ryan

  Firefox version 28.0 has corrected this problem. Thank you!

• Unable to connect to the server... error code 0 x 80070043

  Hey you all.

  We have a server on the network that contains the software and the data we use in a client/server parameter. To install the client side, we do the following from the workstation:

  START / RUN / \\10.20.0.77 which opens a window on the software on this server. Run us Setup.exe and everything is good on the client computer after installation is completed successfully.

  I have not had any problems to access to the / mapping for this server to Windows XP and Windows Vista Business 32 b, but on a Windows Vista Business 64-b system, I am no longer able to connect to the server via the net use or net shareor the map network drive feature. The following error occurs:

  "10.20.0.77" is not set up to establish a connection on port "File and printer sharing (SMB)" with this computer.

  It is possible to access this server by using a web browser, but the software install that way. The error code associated with the start was 0 x 80070043.

  I say "originally" because after researching on the net, a single thread suggested changing the NetBIOS default value " Enabled" for this network card Protocol. After you make this change, the error code as amended in 0 x 80070035, but the description remained the same as those listed above.

  Another thread said the server was to port 139 for mapping research, but Vista has been maps on port 445. Since I can't access 10.20.0.77 server to carry out changes, its installation rinetd solution and implement a file etc/rinetd.cfg to it remapped 445 to 139 is not possible, especially since our network is ENORMOUS and it could affect workstations running without any problem.

  Anyone here heard, or familiar with this type of problem for helping to find a solution?

  Thank you muchly. :)

  Cole

  A teacher affects eternity: he can never tell where its influnce judgments.

  Hello Aj. Cole,.

  I have a couple of thoughts for you, but since you're talking about server and workstation, I guess that you are in a domain environment. If so, then your problem of not being able to connect to a server would be better served in a forum that would be dealing with server and domain issues.

  However, the error message, 0 x 80070043 - the network name cannot be found

  Ensure that you have sufficient access to SMB file transfers (this requires ports NetBIOS open because SMBS use the NetBIOS protocol to transfer data).

  You can also check to see if the Vista workstation has a gigabit card. If so, look for the following local strategy.

  Enable the policy local to always wait for the network at the start of the computer and logon . To do this, follow these steps:

  1. Start the Group Policy Editor (gpedit.msc).
  2. Expand Local Computer Policy\Computer Configuration\Administrative Templates\System\logon.
  3. In the results pane, click always wait for the network when starting the computer and logon and then click Properties.
  4. On the setting tab, click active, and then click OK.
  5. Restart the workstation.

  You don't specify what your domain environment, so I don't know which forum send you as Windows 2003 SBS etc. Use the following link to find a good forum for you.

  http://social.technet.Microsoft.com/forums/en-us/categories/

  Hope this helps

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• E3000 won't handshake with the edge router

  Recently, I bought new E3000. I place the E3000 with edge router static IP address rather DCHP which seemed failing at the same IP address and DNS. Associated with the E3000 laptops have their own IP which differ from the IP address of the border router. E3000 is configured with firewall No. minimum protection, for now. The reason for a minimum protection was to get the handshake between the two routers. The border router is a product of Verizon. The old router I was using is a Netgear who did the handshake with the edge router. I have the latest firmware for the E3000 version of the Firmware: 1.0.04)is build 6. Router will not handshake with wired connections or wireless. Used to connect to the E3000 laptop is running Windows 7 Ultimate.  In fact, all laptops here use the same OS and connect wirelessly. I've tried the package of software provided on the site, which housed a diagnosis that apparently could not solve the problem as well. I have not idea about why E3000 not handshake with the edge router. Can we make a few suggestions. Thank you to all those who respond.

  What is the IP address of the router Verizon? What you write suggests that the Verizon router uses 192.168.1.1. If this is the case, establish the E3000 as a switch simple ethernet access point as follows:

  1. disconnect the E3000 from the Verizon router.
  2 wire a single computer in the E3000.
  3. open the web interface at http://192.168.1.1/ (or whatever the IP address you put it now).
  4. on the main configuration page, make sure that your type of internet connection is on "auto/DHCP.
  5. on the same page, set the LAN IP address to 192.168.1.2.
  6. on the same page, disable the DHCP server.
  7. save the settings.
  8 unplug the computer and one of the LAN ports numbered from the E3000 wireless to your router to Verizon.

  That's all. Now, you can use the E3000 as access point and you can use the remaining 3 LAN ports for wired devices.

• Smartphones blackBerry SERVER RETURNS the ERROR / PIRATE ACCT...

  I made Yahoo my home page it was not so long ago on my camera and was a lot of work... Last night, I received a message that my password has been changed... I think that someone had used the password software to hack my account... I went into the bolt to change my password and the link to do so has been sent to my Hotmail account... Well, I can connect to bolt with my new password but when I try to login on my homepage, I get a message that the server returned an error... I made the changes to the good connection with my email settings in my camera and I have reset the device as well but continue to receive this message... I have a curve 8530 and Boost Mobile is my carrier... I'm running on v5.0.0.654 (1108 bundle platform 4.2.0.298) if that tells you anything... Someone at - it a fix for this problem on the mobile site to yahoo? I can provide more information if necessary. Just do not know what ya need to help me...
  Thank you

  OK like I said, thanks for trying, but never heard from you again so I took care of him, my way, and it worked and I still keep my account... Once again thanks for trying...

• Download Manager "Server returned an Error" when you try to reinstall SQL Server 2008 R2 180-day free trial

  I'm trying to install the trial version of SQL Server 2008 R2 on my computer for the second time within the period of 180 days, because last time it has installed without Analysis Services, I needed. The first time it installed fine.

  I do not get a specific error message - once the Download Manager comes to extract the SQLFULL_x86_ENU.exe file, a box opens and says "the server returned an error. Would you like to try again? "and continues to appear if I try again and block the Download Manager.

  I have Windows 7 and a 32-bit computer. Is the question the fact that it is the second time that I install, or something else? I would have thought that the error would have been more accurate, if that were the case. If so, what can I do to get the software installed on my machine for the rest of the trial period?

  Thanks please help!

  Hello RobPeterscheck,

  If this is your 2nd time to install, did you uninstall the original SQL version until you tried to reinstall?

  You can temporarily disable the download manager in Internet Explorer and then activate once you have installed the download you want. This will help to highlight if Download Manager is the problem.
  Log on with an account that has privileges Administrativer.
  Open Internet Explorer.

  Click on 'Tools' on 'Internet Options'.
  Go to the Security tab.
  Go to custom level.
  Go to the downloads Section.
  Find the file downloads tab and disable the option button.
  Click OK.

  Restart to save the changes.

  Please reply back and let us know if this can help.

  Sincerely,

  Marilyn

• vCenter Server displays the error message: unable to connect to the host

  vCenter Server displays the error message: unable to connect to the host

  Symptoms

  • vCenter Server cannot connect to a host when you perform operations such as:

  •

  o Storage vMotion

  o cold migration

  o cloning a virtual machine

  o the model deployment

  • Newspapers vpxd that contains an entry similar to:

  [2009-06-04 19:27:16.326 error "App" 4444] [VpxdInvtHost] IP address change for 10.223.122.143 to 10.223.127.197 unhandled, verification of the SSL certificate is not enabled.

  • You see errors similar to:

  Unable to connect to the host o

  o [2009-06-04 19:27:09.952 'Libs' 3902384 WARNING] [NFC ERROR] NfcNewAuthdConnectionEx: unable to connect to peer (numRetries = 2). Error: Unable to connect to the host 10.223.122.143: connection timed out

  • vCenter Server shows the VMS as being disconnected then connected.

  Hello

  Resolution

  Cause

  This problem can occur if an ESX host's IP address is changed while being managed by vCenter Server.

  Check the cause

  To check the cause of the problem:

  1. Log in as root to the ESX host using a SSH client.
  1. In the file etc/opt/vmware/vpxa/vpxa.cfg, find the IP address of the host. The entry looks like:

     
     10.21.48.121
     

     Note: for more information about editing the files, see installation in VMware ESX configuration files (1017022).

  Troubleshooting

  If the IP address is incorrect, perform the following steps in order. If the operation does not resolve the problem, continue to the next step. Don't skip a step.

  1. Disconnect and then reconnect the host:
  1. Right click on the ESX host in vCenter Server and click Disconnect.
  1. Reconnect the ESX host in vCenter Server.
  1. Restart the VirtualCenter agent on the ESX host:
  1. Stop the service of vpxa with the command:

     # service vmware-vpxa stop

  1. Open the /etc/opt/vmware/vpxa/vpxa.cfg file in a text editor and correct the IP address of the ESX host.
  1. Start the service of vpxa with the command:

     # service vmware-vpxa start

     Note: for VMware ESXi, you may have to restart all the management agents. For more information, see restart the agents on an ESX or ESXi Server (1003490) management .

  1. Rebuild the VirtualCenter agent on the ESX host configuration file:

     Attention: this step removes all the Statistics counters historical host and the virtual machine. If VMware ESX host is running in virtual machines that starts in a permitted CVS environment, you maybe won't be able to add the host without stopping the virtual machines first.

  1. Right click on the ESX host in vCenter Server and click Disconnect.
  1. Remove the ESX host disconnected from vCenter Server.
  1. Backup the file vpxa.cfg with the command:

     # mv /etc/opt/vmware/vpxa/vpxa.cfg /etc/opt/vmware/vpxa/vpxa.oldcfg

  1. Add the ESX host disconnected to the server vCenter inventory.
  1. Run the following command to view the contents of /etc/opt/vmware/vpxa/vpxa.cfg and confirm that the host IP address is correct:

     # cat /etc/opt/vmware/vpxa/vpxa.cfg

• Cannot add host to vCenter server as data store is shared with an existing host to vCenter

  Recently, I removed a physical host to a virtual appliance of vCenter Server and am not able to add it to vCenter Server because I get an error message on the existing data store.  I run a simple server vCenter environment with two physical hosts and shared storage.  I've only been administering vCenter for a few months, so I'm relatively new on the technology and processes.  I searched the Internet for a few days now, but have not found documentation everyone has the same problem I have (which I find strange considering the simplicity my problem and configuration), so I tried to get help from the community of VMware.

  I received an error message a day this vCenter Server cannot connect to either of the two hosts so I removed the host (rather than disconnect and plug as I should have done).  Now, I am not able to connect to the host to vCenter server because the shared storage data store comes into conflict with the same data store used by the host in vCenter Server.  I get the error message is ' "Datastore"datastore_name"is in conflict with a store of data that exists in the data center which has the same URL (ds: / / / vmfs/volumes/UUID /), but is supported by different physical storage." "  I try to remove the host data store, but get the following error message: "resource" data store name: datastore_name VMFS uuid: UUID' is in use. ".  The error stack said: "'HostStorageSystem.UnmountVmfsVolume' call failed for object 'storage system' on ESXi"IP address"."  Cannot unmount volume ' data store name: datastore_name VMFS uuid: 'UUID' because the file system is busy. Correct the problem and retry the operation. "I tried to delete all virtual machines of the inventory, put the hosts in maintenance mode, restart physical hosts, but none of my troubleshooting contributes.

  I don't know what steps to take to get this data store driving with the host so that I can add it in vCenter Server.  You can provide me with any help is appreciated.

  Good thing you already moved the VMs on.  For what is 'disconnect', 'remove' or 'delete' might work anyway.  You should maybe put the host in maintenance mode or even reboot the host before you can remove data warehouses.  In an extreme case, I even had to remove the host and the hypervisor installed completely rebuild on the spot.  It is not that difficult or does not take long to reinstall, so be not afraid on this subject.  A clean reinstall could still save time compared to the deletion of data warehouses.

• SRM 5.5 - the remote server returned an error: (503) server unavailable, could not create SSL/TLS secure channel

  Design:

  2 vCenter VMs version 5.5 on new W2k12. x. related and the same use facilities key SSO (default installation)

  2 x fresh install of the SRM VMs version 5.5

  20 + hosts vSphere 5.5 with DR/HA configured and working. Two dvSwitches (one per site) configured with the groups of port / VLAN work

  Question:

  Installation goes well until I needed to activate the Plugin SRM in vCenter.  Plugin called "Plug-ins available" and I click on the link 'download and install '.

  I had two separate fouls on both servers vCenter, both with same errors if it is compatible.

  Errors:

  (attached file viclient-3 - 000.log)

  The request has been aborted: could not create SSL/TLS secure channel.

  (attached file viclient-3 - 000.log)

  The remote server returned an error: (503) server unavailable

  I guess that the two are linked and probably something with SSO.  Post installation on each server vCenter vCenter, at the level of the vCenter, I added the "Domain Admins" AD Group with all permissions and then properly connected and built the group with this set of credentials.

  I need help to debug this further.

  Thank you

  ************

  < < Updated > >

  Seems the features and functions are NOT present so you don't not sign in as '[email protected]' (SSO account by default for this "basic" configuration)

  But even with this connection, I have noticed that there is NO option in the webclient service, to perform the installation of a vCenter plug-in.  It does not appear in the vSphere Client (see images).

  I also found it weird that the web client to vCenter illustrates SRM roles but the traditional client does not work.

  Maybe it's a clue to the root cause of...

  Post edited by: ArrowSIVAC 2013-10-07 to provide more details and attachments

  Post edited by: ArrowSIVAC, this is related to the case of support for vmware 13384832210 This problem is solved.  Several pieces here. (1) vCenters were installed secretly with local account as own databases, and this is how I usually do things (2) MRS. servers were built as separate virtual machines, VMWare vs guides guess and documents in anticipation of your SRM installation on the same server as vCenter Documentation / Installer is not clarified that you MUST use domain for MRS accounts in the multiplayer linked site facilities and if you do not, the installation is completed without error, but resources will not work. Errors have for client plugin does not work. It was the symptom, the reason was that the SRM service did not work.  The service would not start and only an error in the Windows event log is 'vmware-dr stopped service' is because the connectivity issue of MRS to vCenter hosted the new SQL instance database SRM. The SRM database has been installed on the instance of vCenter server as vCenter database.  And just like the installation of default vCenter I chose localhost\administrator for database owner.  The database was filled with tables, but SRM has connectivity problems.   The fix for this was to add "domain\user" (called mine SRMAdmin and added as a member of domain admin), add this user in SQL in the list of database users and then promoted as the owner of SRM database and define the rights on DBO. This fixed the first issue. Second issue was that SRM installation set the DSN system identification information, but does not specify that they must also be domain based accounts.  The installation program is not not clear here and should only allow user domain\username when installing. After several attempts because of the root and installation methods different tried, how to get the installation complete and properly configure was to log on to the system AS the example domain account: domain\srmadmin = > Configuration System DSN by selecting "How should SQL Server verify the authenticity of the login ID?"  "with integrated Windows authentication', and then the installation of SRM to the"Enter Database user credentials"value"domain\srmadmin ".  Then and communication services to the vCenter SRM hosted DB database will work correctly. < See images attached benchmarks >

  attached files

• form e-mail server encounterd an error

  Please help it happened at a point where I have to go elsewhere for a work e-mail form...

  I have a form, contact to train me, a widget that comes from muse which refuses to work.

  The site is hosted on the servers of BC. All I have is the accommodation, no further installation CC version.

  I fill in the form and the error I get at the bottom of the form is "Server encounted an error", I guess that's the BC server have been the site is hosted.

  I have 3 sites, there are the works of form, the other two refuse to. I am in fear of ruin the work like this for a client and it seems to work very well. I copied the settings from the form of the working site for others and nothing, the error continues.

  I tried the verious addresses in Setup for the contact form, each one I own, jusdt in case wherever it was a mistake when the email is analyzed by the BC server. No change.

  I turned on and off BC Capture, I enabled and disabled Googles ReCapture. No change. It still does not.

  This is supposed to work with the CC of Muse and BC accommodation basic version (I guess that's as one of the sites work).

  Any ideas or alternatives will be very beautiful.

  On your page with your form to do a "select all" to highlight all the elements on your page. Make sure you don't have any other elements that overlap your text boxes on the form.

• Linux for SQL Server: ORA-28545: error diagnosed by Net8

  Hi guys,.

  I am getting confused with the steps to follow for this because the Oracle documentation is less than the normal ("HS_FDS_CONNECT_INFO = dns" is not enough for example) and different Articles/forum messages saying different things.

  I am trying to connect to Oracle 11.2.0.3 on Linux (64) to a SQL Server 2008 R2 on x 64 with a database named DBA_Housekeeping. Does anyone have a clear guide to the steps (and where)? Can you see what I'm doing wrong here?

  Oracle hostname: gblabl76

  SQL Server hostname: UKAHES066

  I did all the steps are on the Oracle server. I didn't something on the SQL Server (am I supposed to install a client/drivers there?):

  1 created initDBA_Housekeeping.ora in $ORACLE_HOME/hs/admin /.

  HS_FDS_CONNECT_INFO = "UKAHES066\\UKAHES066.DBA_Housekeeping"
  HS_FDS_TRACE_LEVEL = OFF
  #HS_FDS_SHAREABLE_NAME =
  
  

  2 added something to the listener.ora on the oracle server & then start the listener (of the said State UNKNOWN):

  MSSQL = (DESCRIPTION =(ADDRESS = (PROTOCOL = TCP)(HOST = gblabl76)(PORT = 1523)))
  SID_LIST_MSSQL =
    (SID_LIST =
     (SID_DESC =
        (SID_NAME = DBA_Housekeeping)
        (ORACLE_HOME = /oracle/product/11.2.0.3/db_1)
        (PROGRAM = dg4odbc)
      )
    )
  
  

  3. Add a tnsnames file entry:

  DBA_Housekeeping =
    (DESCRIPTION =
      (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
      (CONNECT_DATA = (SID = DBA_Housekeeping))
          (HS=OK)
      )
    )
  
  

  4 creates a connection to the SQL Server default for this database instance. Then, I created a link of database in Oracle:

  CREATE PUBLIC DATABASE LINK DBA_Housekeeping CONNECT TO "hkadm" IDENTIFIED BY "hkadm" USING 'DBA_Housekeeping';
  
  

  But when I try to query the database through a db connection I get the error listed. Anyone see where I am going wrong?

  Do I need to install the drivers on Windows Server (and requires a reboot?)?

  I have to create this DNS thing or matches the string in the hs .ora enough?

  Thanks for the tips: s I hope to connect to our SQL instances server so they can be monitored by their SUMMIT.

  Mike

  Those who seek to connect to Oracle & SQL Server I want to give you the best solution to your problem.

  Use a server linked server SQL for Oracle (push rather than pull).

  If you do just a server then you could do directly. However, if you plan to use several servers, then you must create a SQL Server repository (it could be the free Express version) that will store the data of all your SQL Server databases and then passes Oracle.

  The reason why I did this original post is because I want to store data in our Oracle APEX SQL Server monitoring system. I lost a day trying to trawl through the net for specific instructions for setting up (before Klaus answered me here). It took me less than an hour to select from & insert into an Oracle database in the opposite direction.

  1 install the Oracle client on the instance of SQL Server

  2. If suppliers (under related servers) does not list Oracle then reboot the server (ideally your new repository SQL Server); If she's already then skip this step.

  3. Add an entry for your new DB Oracle TNSNames file

  4 create a server associated with the oracle credentials

  That's all that is needed for a working solution. Yesterday I had nothing, today, I have a link will:

  Many MSSQL isntances-> repository MSSQL-> repository Oracle APEX

  Mike

• Error in access with Essbase Studio Console

  We get the error to connect with Essbase Studio Console.
  
  "children for Root." Reason: Name of unknown package 'extraction '. Line = 1. »
  
  This is a new installation.
  
  E.M.P. 11.1.2.2

  Hello

  During the installation of Essbase Studio only, ess_es_server.jar and ess_japi.jar are missing. If you install Essbase and Studio, they have not disappeared.

  This is due to the new bug 14232814 - in the COURSE of the INSTALLATION ONLY STUDIO SOME. NOT INSTALLED JAR FILES

  Try the following:

  Stop Essbase Studio
  copy the files in EPMSystem11R1\common\EssbaseJavaAPI\11.1.2.0\lib
  ess_es_server.jar
  ess_japi.jar
  If the folder does not exist, create it.

  1. stop essbase Studio.
  2 remove the tables in relational database
  3 paintings to recreate.
  4. start Essbase Studio.

  Scripts to let fall & recreate the catalog located under
  oracle\middleware\EPMSystem11R1\products\Essbase\EssbaseStudio\Server\database\common\db_name

  It could be that useful...

  KosuruS
  PS: If the above information is useful, mark :)