Accept incoming calls in Windows 7

Similar Questions

• Is it possible to programmatically accept an incoming call?

  I'm trying to pick up an incoming call by program by injecting the key event to SEND it, but that doesn't seem to work (without exception, the event is simply ignored. The correct permissions are defined as and other must-have injections work just fine). The incoming call screen doesn't seem like inevitable injection at all.

  Just to be safe, I have the following code in the callIncoming() of the PhoneListener method:

            EventInjector.KeyCodeEvent ev = new EventInjector.KeyCodeEvent(
                      EventInjector.KeyCodeEvent.KEY_DOWN,
                      ((char) Keypad.KEY_SEND),
                      KeypadListener.STATUS_NOT_FROM_KEYPAD, 100);
              EventInjector.invokeEvent(ev);
  

  Please correct me if I'm wrong, but I think that this code is correct but ignored (apparently on purpose) by blackberry.

  Is there another way to do this? (I really hope that, because it sounds like a sticking point for us, which means that we must stick with Symbian & WinMo for our product where it works very well).

  I test on a BlackBerry 9000 "BOLD".

  the call method is called before the incoming call screen. If you inject the send key, nothing happens because the modal screen is not yet there.
  Here is the code I use to accept the call. To be on the safe side, I use, I create a new Thread in sleep (500) callincoming and call for a break of half a second for the overall screen to show.

  UiApplication.getUiApplication().invokeLater(new Runnable() {   public void run() {       ApplicationPermissions permissions = ApplicationPermissionsManager.getInstance().getApplicationPermissions();     if (permissions.getPermission(ApplicationPermissions.PERMISSION_EVENT_INJECTOR) == ApplicationPermissions.VALUE_ALLOW) {          EventInjector.KeyCodeEvent pressEndKey = new EventInjector.KeyCodeEvent(EventInjector.KeyCodeEvent.KEY_DOWN,                  (char) Keypad.KEY_SEND, KeypadListener.STATUS_NOT_FROM_KEYPAD, 100);          EventInjector.KeyCodeEvent releaseEndKey = new EventInjector.KeyCodeEvent(EventInjector.KeyCodeEvent.KEY_UP,                  (char) Keypad.KEY_SEND, KeypadListener.STATUS_NOT_FROM_KEYPAD, 100);          EventInjector.invokeEvent(pressEndKey);           EventInjector.invokeEvent(releaseEndKey);     } }});
  

  use invokelater to inject the key and it should work.

• 7 Windows fax and scan-error message "incoming call cannot be answered as a fax call.

  I use a U.S. Robotics 56 K Fax Modem model 5686 G v.92 and when a fax is sent it tells me that the call has been answered as a fax call and then during treatment, I get "incoming call cannot be answered as a fax call.  I've been working on this for 3 days now and just can't seem to get this point.  Any suggestions would be greatly appreciated.

  Hey Joe,

  You must ensure that your computer (or your external fax modem) is connected to an analog phone line, and that the phone line has a dial tone so that you can place and receive phone or fax calls.

  Method 1:

  Turn on send and receive options for a modem

  
  
  Check the modem settings to see if send and receive options are turned on.

  Turn on send and receive options for a modem

  1. click the Windows Start button, click all programs and then click Windows Fax and Scan.

  2. to use the fax at the bottom of the left pane, click Fax.

  3. click on the Tools menu and then click fax settings. Need administrator permission if you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  4. click the general tab and then, under device name, make sure that the modem is selected.

  5. under send/receive options, make sure that allow it the device to send faxes check box is selected.

  6 make sure that allow it the device to receive fax calls check box is selected, and then choose how to receive faxes:

  * To answer phone calls as incoming fax calls manually by using Windows Fax and Scan, click on manually answer, and then click OK.

  * To have Windows automatically answer phone calls as incoming fax calls, click on answer automatically after X rings, select the number of rings after which Windows can try to answer phone calls as incoming fax calls, and then click OK.

  If someone else set up the computer to send and receive faxes, you might not have permission to use the built-in or external fax modem.

  Method 2:

  
  

  Give all users permission to send and receive faxes

  1. click the Windows Start button, click all programs and then click Windows Fax and Scan.

  2. to use the fax at the bottom of the left pane, click Fax.

  3. click on the Tools menu and then click fax settings. Need administrator permission if you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  4. click on the Security tab and then, in the names box, any user or group, click everyone.

  5. in the permissions for everyone box, select the check box allow next to permission to Fax and then click OK.

  For more information, access the link below

  The problems of fax (valid also for Windows 7)

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-fax-problems#EJBAC

  Additional information:

  Configure your computer to send and receive faxes

  http://Windows.Microsoft.com/en-us/Windows7/set-up-your-computer-to-send-and-receive-faxes

  Fax and scan Windows

  http://Windows.Microsoft.com/en-us/Windows7/products/features/Windows-fax-and-scan

  Fax: Frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/faxing-frequently-asked-questions

  Please post back with the State of the question and we will be happy to help you.

• No sound on the hands-free car on incoming calls after upgrade iOS 10

  I recently updated my iPhone to iOS 10 6s. With one of the versions iOS 9 it makes my hands-free connection in my Toyota 'agitated', but this time I could call people without problem, so I thought everything was ok. That was, until I got a call and didn't hear a thing after accepting it.

  Seems iOS 10 has broken my audio on incoming calls. I can't hear the caller, and the caller does not hear me. I tried to reset network and matching settings once again, but unfortunately which didn't help either (this resolved the problem of stuttering last time).

  Anyone got tips on how to solve this problem?

  DelGurth salvation!

  I see that your car radio on your iPhone Bluetooth connection no longer works correctly.  I know it's important to have this job just so I'm happy to offer assistance.  Please follow the instructions in this article, and it may be necessary to contact Toyota to see if there is an update of the firmware available for your car stereo.

  Help to connect your iPhone, iPad or iPod touch with your car radio

  Thank you for using communities of Apple Support.

  See you soon!

• Why El Capitan 10.11.6 wonder to accept incoming network connections to iTunes12.5.1?

  WHENEVER I'm starting iTunes12.5.1, I wonder by El Capitan "do you want the application"iTunes.app"to accept incoming network connections?

  "Authorized" it the first time, why is it happen again?

  This isn't a small problem of snitch I deleted all the rules of LS for iTunes. Start iTunes and get two windows permissions. The small window reproduced every time I restart iTunes.

  I reinstalled the OS X 10.11.6 and downloaded iTunes from the iTunes site and reinstalled. I always get the menu 'accept' whenever I start iTunes.

• Cannot answer incoming calls

  So, recently, I tried to open Skype and he said "I was already logged on another computer" and I wasn't so I went into the Task Manager and found a Skype program still running and I closed it. Ran of Skype. Put Skype to date. THEN more problems arise. I can answer now is no more incoming calls and I can't call someone. If I try to call someone I'm stuck on the call screen and it never sounds and if they call me im stuck on the screen where they claim even if they are no longer. Now, I can't talk to my friends on Skype and they didn't and don't won't use any other program. Ive tried EVERY Solution I've seen on the posts related to this issue and none of them works.

  Try to update driver Audio Realtek

  http://www.ASUS.com/Tower-PCs/K30BF/HelpDesk_Download/

  Be sure to select the option of 64-bit Windows 10.

• Skype reciveing not incoming calls

  I use Skype 7.24 on win 10

  I can't receive incoming calls if I get a group call, a conversation Untitled window appears and I can't join the call as it just keeps ringing at the other end

  This problem persists on the Office of Skype and Skype web

  However this does not happen on my phone is not my ISP

  I tried

  uninstall reinstall

  running compatibility mode

  admin mode works

  change all alert settings

  I also checked the firewall

  I also checked mutable forum messages none having the same problem

  It turns out that I just had to not actually have with the microsoft account

• Skype crashing the program and the PC when making or accepting a call?

  Recently, my Skype crashing and freezing my PC when I make or accept a call, so the only thing I could do was to reset my computer. It's never happened before and talk to my friends a pain when they call me will freeze, it will make me sometimes in the call so I can talk but not able to do anything on my computer. Any help to fix this would be greatly appreciated.

  Try to uninstall the currently installed version of Skype and install the previous 6.14.0.104 version by using the download links provided here:

  http://community.Skype.com/T5/Windows-desktop-client/ASUS-USB2-0-webcam-not-recognized-by-Skype-6-18...

  Be sure to turn off the automatic updates:

  Tools-> Options-> Advanced-> automatic updates-> turn off automatic updates

• Skype rejects all incoming calls.

  I have major problems with incoming calls.

  When an incoming call arrives, my client desktop computer immediately rejects the call. Basically the same as picking up the phone and immediately hanging up on the caller.

  However, I can shout to the people, and the call works normally. I can even use the video when calling other people.

  Reset the client by following the directions listed elsewhere on this site I give one call in which he tries to connect, but never quite finished the connection and hang up. After that, he immediately goes to immediate disconnection.

  It's really very annoying because I am currently unemployed and must be able to receive calls from employers and potential employers.

  Currently using Skype 7.0.0.102 for the desktop on Windows 8.1.

  Is it possible I can get support on this issue?

  In fact, I just a little more research and found that, apparently, the first call after starting Skype will go, however, Skype will be "think" are you still in this first call, even though you could have ended it already and therefore show that you are 'busy' and reject an incoming call.

  There seems to be a problem with many users of Skype 7.0.0.102 and Support of Skype is apparently downgrade to Skype 6.9 and disabling automatic updates, which I won't do. (I like the new design of Skype 7.0: happy)

  I guess the only solution for you is to go back to an older version of Skype, so you can receive your important phone calls to potential employers (good luck!), but my solution is to simply suck it up and wait for an official update of Skype/Microsoft.

  Kind regards
  
  Jasper

• Incoming calls

  On my iPhone and Samsung phones, when I get an incoming call, I get a display full screen caller and my meeting options. On the Moto G all I get is a small notification at the top of the screen. Y at - it another way to get notification of full screen. Thank you

  This isn't a problem; It is a much appreciated feature of Lollipop Android.

  -If the phone is not in use, all incoming calls will be displayed in full screen

  -If you use your phone - whether any application or game, incoming calls will be alerted as a heads-up display.

  You can accept or reject the call; or simply he slip away and continue to play the candy crush continuously

• Send faxes to incoming calls

  In windows 2008 role fax server is it possible to send a file that is predefined as pdf or docx as outgoing faxes for incoming calls?

  OTHERWISE, there is a third party application like fax server that have this ability?

  Thank you

  Thank you for your attention

  Hello

  Welcome to the Microsoft community.

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  http://social.technet.Microsoft.com/forums/en-us/winserverfiles/threads

  Hope this information helps.

• Multifunction color HP LaserJet Pro CM1415fnw - notice of incoming call

  I use the above multifunction device on a network with Windows 7 (and Vista) machines and Mac OS X Lion (v10.7.2).  For some reason, the main screen constantly displays the message 'call '.  It is connected to an incoming phone line (downstream from a Vonage Linksys router, so I use IOPV), and there is an exit of a Panasonic KX - TG6441 phone without phone/answering machine phone line.

  Is it normal that the screen displays 'Incoming call' with the key 'Start Fax' down right under the screen stardard of?

  Thank you for all the advice!

  You can configure this value higher.  The minimum standard ring of Bellcore is 40 volts, typical is from 70 to 90 volts RMS.  I would like to try 40 and 50.  Make sure that it does not always meet the rings.  If you have a voltmeter and adapter in small groups, you can measure the voltage of ringing to see what is generated.

• Get the message of incoming call on HP 7520 all-in-one Photosmart

  I had a professional hook up my HP Photosmart 7520 wireless all in one.  I have a special ringtone that is put in place for faxes and also

  I get phone calls on this line. Everything works fine, but lately I've noticed when I get a phone call

  a message appears on the screen of the printer saying incoming call Auto answer on ignore or accept. I also get this messge

  for incoming faxes. If you do not click on ignore or accept that everything works well. You will get your phone call and also the

  Fax will print. I do not know if this message appeared on the screen of the printer or I'm just noticing.

  I think I started to get this message calls and faxes. Can someone tell me if this message should always

  appear when you get an incoming call or a fax or is there a setting I need to change to get rid of the message? The message really is not hurt anything if you pretend it isn't there, for incoming call example, message, leave it alone and pick up phone and all is well. The same thing with the fax. I have a distinctive ring of a fax, a double ring, but the message remains displayed "call auto answer incoming on ignore or Accept." If you do not click on ignore or accept the fax starts printing and the message disappears.  I swear I've never seen this message before.  Can anyone share any light

  on this subject? I don't know if I make a mountain out of a hill of the mole, because everything still works, but I

  never remember just to see this message on the printer display screen before and I would like to know if it comes from an update, or if I've accidentally changed something, or if it was always like that and I just noticed. Please, if anyone can shed some light on this, I would be grateful, because I really think that this message has begun to appear even if everything seems to be in working condition. All answers would be appreciated. I know I'm old, but I hope I don't get senile no also. The only thing that has happened between the time wherever I noticed this message is I needed a Java Update and I got a fake virus. This was my tech support-assisted and supported.

  Thank you in advance.

  Hi go_pens,

  Your printer has a feature that allows automatic updates. There was actually a patch last week or the week before for this printer. These updates to the firmware of the printer. I think that your mind is still intack, I believe, you're not senile.

  I don't think the message appeared on the printer before, I guess you're right, and that the update made this change. In addition to the automatic response accepting faxes for you, you now have the possibility to accept or ignore the fax before that the automatic response accepts the fax.

  I hope that this addresses and solves your request! Thanks for joining the HP Forums. If there is anything else, we can help do not hesitate to ask.

• How to answer a video call in windows live/messenger?

  I am running Windows XP with the updates Windows Live / Messenger with video of telephone services. My webcam works and when I video call my contact, he can't see my Visual incoming call.

  How answer us a video call?

  Polly

  Hello Polly,

  Try the steps listed in the article below and check if it helps you to fix the problem.

  Impossible to establish a webcam with Windows Live Messenger conversation

  If this does not help, post your request in the instances of Windows Live for assistance on this issue.

  Windows Live Messenger Support Forums

  Live Messenger Audio call or video support

• When I plug my HP Officejet 6500 E709a in my telephone jack incoming calls, get a busy signal.

  I have Brighthouse for my phone, internet and television. I recently moved and in my previous House, I have brighthouse and the same in one and same phone. I have a new computer with windows 7.

  If I pull the phone line I can get incoming calls. If I plug the phone line, I get only a busy on the incoming signal. Disconnection of the power or usb it makes no difference.

  I found the problem. When I used the calls a 2 line phone incoming cord has got a busy signal. When I changed to a 1 line cord phone incoming calls came through. I have only 1 line.