Access a table/vector by domain name

Similar Questions

• Configuration remote access VPN (IPSec) using FULL domain name

  Hi friends of Cisco,

  We have the DNS (only the internal IP) within our network, right now that we have configured VPN for remote access using public IP address and connect us with the same public IP address. I need help to use the domain name FULL rather than use public IP.

  Can you please provide the configuration for this.

  Feature: ASA 5520

  Type of configuration: IPSec

  Thank you

  Estel

  Hi Philippe,.

  You can use one of the free Web of DNS dynamic sites and configure ASA to dynamic DNS.

  Reference - http://www.cisco.com/en/US/docs/security/asa/asa84/configuration/guide/basic_ddns.html

  HTH,

  -Dieng

• Once my domain name expires will I still be able to access my old email on thunderbird

  My domain name is about to expire, I am trading is no longer. However, I may I remind the old emails for the invoices, documents, orders, info etc etc. I will be able to access once the domain has expired?

  You must first upload everything to your server
  Export a complete file will contain all of your (local) settings, address book, etc., but also your emails with attachments as long that you do not move them elsewhere. Perfect for if things go wrong.

  If it is an IMAP account please move all your emails into local folders. As we do not know if you downloaded them on your pc or just look a headers.

  If it comes from a pop account, your only worry would be if your messages are still on the server.
  Even in this case I offered them to local folders

  And you don't have to use the addon on full profile, you can export a folder and its subfolder as mboxes, i.e. the TB-format natively. It's files without extension, .msd is the directory and .msf 's index

• Network error mystery - Windows cannot access \\server\users when you use the netbios name, but works fine when you use the full domain name.

  Hi all:

  Mystery - I have a Win 7 work company that cannot access a particular action.  I get the following error-"you are not allowed to access \\server\users.  Contact your network administrator to request access.  However, these users can access these files successfully on other computers, and also if I use the fqdn or the IP instead of the "netbios name server", it connects successfully.

  Environment:

  -Workstation and server at the same time in the same AD Windows 2008 r2 domain.

  -All users, admin and non admin, cannot access this share when connecting to this computer only.

  -ACCESS to the other actions on the same server, as well as actions on other servers.

  -The biggest mystery to me - if I type the FQDN, \\server.domain.local\users, it works!  What the?

  I tried:

  -Deletion of the domain and add it again, no improvement.

  -Check Event Viewer, nothing jumps (not red or yellow).

  -Enabled auditing for access to objects on the server, it does not show a failure in the security event log.

  -Turn off the firewall of my computer.

  -UN-share and re - share the directory.

  -Give everyone full control (the fact that it works well with de facto authorities a little full domain name, a candidate little likely, but I have an open mind).

  For anyone wishing to offer their 'help' by asking me to make some sort of workaround as re - install windows or turn off netbios or use only of the full domain name here on out or whatever, please Don ' t bother.  I appreciate your help, but I am quite able to reinstall and I'm not interested unique hacks that affect this otherwise network well managed, I'm looking for a solution that will allow me to save time and is a long-term solution.

  In my view, that a key point here maybe I can connect successfully using \\server.domain.local\users, but not \\server\users.  Someone at - it some thoughts?

  In DNS server of youe, go to the area in question and in the use of select search before Wins wins tab and enter the address of your wins server if you have one. If not, install one.

• I have a site designed iWed which I can't = up to date. I want to design a new Web site with a different place (everweb?) How can I get rid of the current site? I want to use the same domain name.

  I have a designed iWeb site I need to update. I know I can't use iWeb so want to design and publish a new Web site. I want to use my current domain name. How can I get rid of the existing site?

  So, you want to delete this Web site. That's right?
  If so, you can make trought accessing the website 'admin panel' or 'FTP '.

  An administration panel (or "administration panel") is a site that your host/domain provides to you, where you can change everything you want - even is for 'FTP', 'FTP' is a server where you access your Web site and change what you want, and that includes delete the current Web site.

  Questions please ask.

• Cannot 'Sign in Windows Live' in WHS2011 to set up a domain name

  I'm putting in place on WHS2011 remote Web access. Router is configured correctly, but when I go to set up a custom Microsoft domain name using my outlook.com account, I get an error that says "the user name or password is incorrect. Retype your user name and password'. I KNOW I'm entering the correct name and password. Why is everything happening? How should I do?

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• I want to move or archive all logs of all the computers in my domain name in one place

  Original title: more details

  Thanks for the reply, but it did not entirely of my concern. I want a way to automatically archive all the event logs of all computers in the domain to a place or location so that everytime I want to view logs from any computer I have to go to the centralized location and view it instead of going on this computer
  Hope I made my concern more clearly now.
  Hope to hear from you soon
  The sub steps might help you better understand my point of view
  1. I want to move or archive all logs of all the computers in my domain name in one place
  2. I want to be able to access any newspaper of the events from any computer by simply contacting this central location
  Thank you

  Hello

  Given that the problem is related to the domain network, I suggest you post this question in the TechNet forum.
  http://social.technet.Microsoft.com/forums/en-us/categories/

• There might be a problem with the configuration of your DOMAIN NAME SERVER

  Last week one, I noticed some problems with my internet connection. I have a BSNL broadband connection. I am connected to the internet, and after some time all of a sudden, I'm not able to connect. My modem lights are all on and on my laptop, I see the symbol of 2 computers with a note on it, which means that I'm connected. But still the pages not displayed. When I run Network Diagnostics (I Windown Vista) I get the error message saying: "there could be a problem with the configuration of your DOMAIN NAME server. I turned off the computer and the modem and switch it on after a long time... He would return but loses the connection with the same error message again. What can I do? I tried to reset the modem, also tried the system restore. What can I do? Please help me. I have laptop Dell Insipiron with Windows Vista and I connect wireless.

  We do not know how your system should be set up - including the DNS configuration and settings.  I recommend you contact your ISP's technical support group and get help from them in the configuration of your computer (and test lines and modem - the problem could be the modem and not on the computer or it could even be the service provider itself).  It can be something as simple as a typo or a box checked or not checked - I do not know because I do not know their settings (different for each access provider).  Give them a call.  I do so often when I have connection problems, and they are almost always useful, or schedule a service call if they cannot help.  I think it's your best chance to solve this problem.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Windows 7 cannot resolve the ip addresses of domain names

  I have a desktop computer that I built components purchased in a major computer store.  I got this system works well for several months, now.  Recently, however, I met a problem with one of the modules of memory of 2 GB.  I deleted (because it turned out to be defective) and, shortly AFTER his withdrawal, have another problem with the resolution of Internet domain name.  I have to say that I also installed my old Windows XP as an alternative OS and updated to sp3 (it is, in fact, that I use to access the internet and write this query).  As you can see, XP I have no problem with internet access or name resolution.  There are two other systems connected to the home network via wi - fi (one equipped with Windows Vista and the other a tablet PC running Windows XP Tablet Edition) and none of them have no access to the internet problem.  I ran ipconfig/release and / renew without any result.

  I did all the following: netsh winsock reset catalog
  netsh int ip reset reset.log
  netsh int ipv6 reset reset.log.
  Still no access.
  I opened regedit and went to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters and set the following registry value:
  Value name: IPEnableRouter
  Value type: REG_DWORD
  Value data: 1 (this is the only value I changed - from 0 to 1)
  I then exit regedit and reboot... still no access.  BTW: I noticed now that this entry (IPEnableRouter), nor any of its values, is no longer even exist in my registry.  I think it has something to do with my changing parameters of Cisco Linksys E1000 router to allow me access to my home network.  In addition, even if she says that I'm connected to my home network and the router, I don't see two other computers in the network, only the items that I share my desktop.
  I changed the "Preferred DNS server" to 208.67.222.222 as instructed in a possible solution I found on the web (in XP, of course) and, when it does not, changed to 208.67.220.220 instructions, but no.  Still nothing.
  I can access any Web site... IF I KNOW THE IP ADDRESS!  Unfortunately, my mind is not enough powerful or with enough RAM to remind all the IP addresses that I never go, not to mention every single IP address in the internet.
  If I had remembered to I have copied to Notepad (so I could then copy here) the results of an ipconfig/all command, but I didn't.  If this will help, let me know and I'll get it and post it.  I know that some errors I have received are 'Windows could not automatically detect the network proxy settings"and"registration of the DNS records failed.  The parameter is incorrect"and" an error occurred during the liberation interface Loopback Pseudo-Interface 1: the system cannot find the specified file. "
  Some of the results of an ipconfig/command all, I write down, such as those that came out as strange or maybe wrong.  They are as follows:
  Active IP routing: NO
  WINS proxy enabled: NO
  Host name: (empty)
  Suffix primary DNS: (empty)
  Node type: hybrid
  DNS suffix search list: News:[email protected] (Yes, I use Road Runner by Time Warner, and no, they were not able to help at all)
  Other results:
  ISATAP.KC.RR.com tunnel adapter
  State of the media: Media disconnected
  Card tunnel Teredo Tunneling Pseudo-Interface
  State of the media: Media disconnected
  Please keep in mind that all computers connected to this wireless router have no problem with access to the internet and this computer can access in Windows XP but not Windows 7.  In other words, is there anything wrong with the router and nothing wrong with the wireless network adapter.  Besides, I tried to reboot the router and even resetting (much to the chagrin of my other significant because she was not happy with not being able to access the internet until I was finally able to re - install the router)
  !).  I have also turned off my system, removed the card wireless adapter, waited for about 15 minutes, re-inserted in the PCI slot and return to market the system.  This, of course, did nothing, either.
  After the search for several days and trying various tactics and bugs as suggested all over the web, I'm at the end of my limited knowledge and patience with this problem.  Any help that will solve this problem and allow my Windows 7 to access, once again, the internet would be greatly appreciated.  As a last resort, I might have to re - install Windows 7, but I also read the posts where others have done so, but nothing helped. :(
  Thank you
  Lakusus
  The system configuration:
  Windows 7 64 bit Home Premium 32-bit of Windows XP Home Edition operating systems and in a dual-boot configuration
  Card mother ASUS M4A89GTD PRO series
  AMD Athlon (TM) II X 4 640 clocked at 3.49 GHz
  2.00 GB of RAM
  Linksys Wireless-G PCI adapt
  Graphics card XFX ATI Radeon HD 5750 card w/1 GB GDDR5 memory
  Two hard drives 1 TB SATA and a 250 GB HARD drive partitioned into a total of 10 discs
  Burner DVD HL-DT-ST DVDRAM

  In fact, I have since fixed my problem.  Believe it or not, it wasn't any major and detailed process.  It was a very simple thing that NONE of the resolutions on that I read even suggested might be the cause, so I don't even think to check it out.  Apparently, at any given time a week ago, or NAME of the COMPUTER, something erased my!  I forgot how I found this, but I think that I went to my device manager by double-clicking on the icon "Computer" and select 'Properties' and happened to notice that, under 'Settings of computer name, domain, and workgroup', the ' computer name: "and" full computer name: "fields were empty!

  SO, I clicked on 'Advanced system settings' on the left of the window properties, select the "computer name" tab (1st one at the top left of the window that has popped up) and down to "to rename this computer, click on change." I clicked on the button 'change... '. ».
  In the next window which displayed I got the name I initially chose for my desktop, clicked the button "More"... ' and 'News:[email protected]' in the ' suffix main DNS on this computer: "on the ground (as is my Internet service provider - others may be different) and ensured that the box"Change the suffix main DNS when the domain membership changes"has been checked.
  Then, I clicked OK on this window.  I then made sure that the "Working Group:" radio button was selected and typed "WORKGROUP" in the field below, then click 'OK '.
  Return to the window' system properties 'original, I clicked 'Apply' and 'OK' and then restarted my system.
  Windows 7 being loading, all of a sudden all these programs that were inactive for the past few days began to appear and load and update!  YAY! Laughing out loud
  So, the reason I went into detail about how I solved it is in case anyone else has this same problem, they can check and, if the computer name has also been deleted, follow these steps to correct the problem. Of course, you will need to contact your service provider (if other than the Road Runner by Time Warner) in order to obtain the primary DNS suffix.  I hope this will help others I do not go through the terror I lived not having access to the internet.  Aaaaarrrrggghh!  I MUST have my internet! LMAO

• Difference between "Home network" and "Business Network" WITHOUT a domain name in Windows 7?

  I'm paranoid and always try to choose security options more high.  In preparation for the implementation of a small Windows 7 network behind a NAT router wireless and wired, I'm working through "Microsoft Windows 7 in depth" by Cowart and Knittel (what, rights of copyright 2010).  I fell right on the following steps (mentioned verbatim in p. 446-447), that I don't understand.  (The steps are clear enough but the real difference between the first two choices is not.) :

  «.. . Click on change settings, click Network ID...  You are prompted to select the option that best describes your computer:

  • This computer belongs to a network of business; I use it to connect to other computers at work.
  • This computer is a computer at home; It is not part of a corporate network.

  «That one you choose made a significant difference...»  If you choose the option "Business Network", Windows configures your computer for a better level of security it will be for domestic use [my underlining].  The wizard then asks you choose one of the following responses:

  • My company uses a network with a domain name
  • My company uses a network without a domain name

  «.. . If you build your own network as described in this chapter, select a field, then click Next.  The last question asks a name for the network working group.  Leaving the WORKING group by default in place".

  It seems that you can set up a "Business Network" 'without a domain' that outward behaves as a similar "home network".  If Yes, what is this 'higher standard of security' that will result? -JCW2

  There is only one difference between home network and profiles work that appears when you sign in for the 1st time.

  A profile of home network allows to create or join a homegroup, on a job profile that you can not. So what it means actually using the term "business" is false and the differences in security are limited.

  One of the limitations of a workgroup can access one action requires the credentials of all users to set up on the host pc, setting up a homegroup automatically creates a common user between computers that could be considered a low security setting...

• Political DAP to check the domain name for MAC OS users!

  Hi all

  How can we configure DAP for Mac OS users, to allow access by the validation of the configuration of the domain name in the MacOS?

  I was able able to configure the same for Windows users by using the domain name 'Register' value in the DAP. However, as MacOS do not have to 'Register', I'm trying to find a solution on how would be the authorized user by looking at the entrance to domain somewhere in the MacOS.

  I heartily thank you &.

  Ameya diabate

  Registry check	Looking for a registry key (Microsoft Windows only)
  File check	Verification of a file
  Verification of the BONE	Check the operating system
  Verification of certificate	Verification of a certificate (Microsoft Windows only)
  IP address control	Check the IP address of the interface

• Domain name of ISE, certificates and portal comments

  Hello world

  We have a deployment ISE using our internal domain for its FULL domain name (example: ise01.private.local). Now, we want to use for authentication of access as a guest and have noticed that the default redirect URL uses the FULL of the ISE Server domain name.

  It works very well for our business machines that we have our own generated certificates and internal certification authority. As we don't want a certificate, that the errors that occur for our clients, we need to use a public domain FULL name.

  Are we better off by changing the domain name used by the servers of the ISE, or is it possible to change the redirect URL to use a custom domain?

  I've heard suggestions that change the domain name is not supported, but I can't find another way.

  Thank you
  Mark

  Mark,

  You already have a public domain FULL name pointing to your ISE?  If so, let's assume that you authenticate you if you use a CWA.  First creat a new profile authorization, under common tasks, select redirect Web (CWA, DRW, MDM, DK, RPC), choose the authentication method (in this case, CWA) and set the ACL to use.  Just below, select the name of the static host/IP and enter the COMPLETE public domain name that points to your ISE.

  

  From there, you can create a permission policy to reference the profile that you just created.

  Please rate useful messages and mark this question as answered if, in fact, does that answer your question.  Otherwise, feel free to post additional questions.

  Charles Moreton

• IP domain name

  Can I set up a router with SSH access without specifying a domain ip?

  It is default to something?

  If I don't have, can I just pick any name?

  Thank you

  to configure ssh, it requires the creation of rsa keys, which are based on the domain name. If you are unable to configure ssh access without a domain name.

  No, by default it is empty. the domain name you set up on the router is local, it won't share/sync with any other device. so you can do until you want to.

  one thing needs to be noticed is that the rsa key is based on the domain name, so whenever you change the domain name on the router, you will need to re - generate the rsa to access ssh key.

• How to configure Apache to send the queries based on the domain name to the forms, www and Servlet directory?

  Hello

  I installed Oracle Forms 11.1.2.1.0 on a Linux server.

  This server will run a Forms application, a web site and a Servlet for a couple of unique clients.

  Each client accesses its own applications through its own domain name.

  For ex:

  http://Customer1.mydomain.com/forms/frmservlet?config=CUSTOMER1 -> Forwarding Port Weblogic 9001 (Forms)

  http://Customer1.mydomain.com/www -> Directory access... local/htdocs/customer1/www

  http://Customer1.mydomain.com/myservlet -> Weblogic 7101 port forwarding. This a new server created in the field of Weblogic to run Servlet. Each Servlet will be deployed with a specific context by customer: myservlet/customer1 /

  http://Customer2.mydomain.com/forms/frmservlet?config=CUSTOMER2 -> Forwarding Port Weblogic 9001 (Forms)

  http://Customer2.mydomain.com/www -> Directory access... local/htdocs/customer2/www

  http://Customer2.mydomain.com/myservlet -> Port forwarding Weblogic 7101 with PathPrepend: myservlet/customer2 /

  My idea is to configure the Apache Server using 1 VirtualHost by customer:

  < VirtualHost *: 80 >

  ServerName customer1.mydomain.com

  ServerAlias *. Customer1.mydomain.com

  DocumentRoot "/ u01/app/fmw/asinst_1/config/OHS/ohs1/htdocs/customer1/www.

  < /myservlet location >

  SetHandler weblogic-Manager

  WebLogicHost myhost

  7101 WebLogicPort

  PathPrepend /customer1

  < / location >

  < / VirtualHost >

  Is this a good approach?

  Can I place block < location > < VirtualHost > block?

  From what I've read on the web, it is the common way to request proxy based on URL.

  My first tests raised an error like: CONFIG_ERROR [line ap_proxy.cpp 1735]: 'WebLogicCluster' or 'WebLogicHost' specified in the parameters of

  That's why I wrote this question.

  Further more, can I add a specific redirect for forms inside the VirtualHost customer who will redirect

  http://Customer1.mydomain.com/forms -> Redirect to Weblogic Port 9001 (Forms) adding /frmservlet? config = CUSTOMER1 you URL?

  Thanks in advance.

  Your approach is correct, but there are a few details that need tweaking. Can take place inside VirtualHost. Have you enabled ability to host virtual by uncommentNameVirtualHost *:80 in httpd.conf?

  


• FULL ROUTING DNS DOMAIN NAME

  Hello world

  I have an FQDN object on our firewall, IP address of this Exchange every day so the firewall has a rule to allow access to it on a specified port number.

  Example:

  allowed to Access-list inside_access_in line 284 extended tcp host 192.168.0.25 eq 191.235.193.75 (database.windows.net) 1433 (hitcnt = 0) 0xeef0bf01

  It works very well, however I can not route traffic to the firewall of our series 6500 CORE switches if I do not know the IP address of the object.  I have a server that needs access to this purpose to FULL domain name.

  How to get traffic from our base at the firewall?

  CORE Cisco 6509 (s2t54-ipservicesk9-mz. Spa.150 - 1.SY2.bin)

  Firewall Cisco ASA 5540 v9.1 21 (5)

  If the IP address changes every day, so it seems that the use policy routing based on traffic for TCP 1433 forward could be the solution for you.

  HTH

  Rick