Access control strategies

Similar Questions

• Console Bus service 12 c - cannot display/change access control strategy

  Using Weblogic 12.1.3 + FMW 12.1.3

  So I exported / imported all our existing material FMW GR 11, 1 objects in a new field of 12 c FMW.   Everything works - except that I can't click on the link for "transportation access control.  Contextual text says "connected to the role is not allowed to display/change access control strategies.

  In EM, the Application role 'MiddlewareAdministrators' shows the administrators as a member group.    Proxies that 11 g used the default "of the Everyone group" fail like proxies that can visit based on roles.

  Even if I create a new proxy, I'm stuck using the access of Transport control link.

  

  So I added the permission to my account, and the Transport link is available.  So I removed this policy and then added the authorization for the role of MiddlewareAdministrators, and it works

  Looks like I click on the 'OK' button the first time.

  But this seems to indicate a lack of permissions when fmw 12.1.3 is installed directly.  Since we are upgraded to 11g, I don't know if this authorization is also absent in 12.1.1 and 12.1.2

  I have

• Airport network guess without the access control list.

  In fact, on the page AirPort base stations: on the guest network feature, Apple write this:

  "If enabled, access control lists will be applied to both the main Wi - Fi network and the network of comments. If you use Access Control Lists, you will need to add your comments network clients to the list so that they can join. »

  I think that on previous versions of the airport, it was possible to use the network to guess without the access control list.

  The idea is that only the (primary) private network should use this access control list.

  The network presupposes that is give for direct and temporary access (not necessary to access Airport utility, ask your friend and note its Mac address, restart the resort from the airport... for every friend who invited you to home)!

  Is there a workaround resolution?

  Unless you have set up a default rule 'No access' in the timed access settings, then it is not necessary to set up a rule for each "guest." Just give them the password for the network of comments and they will be able to access the network.

  IF... you have set a default rule 'No access' in the timed access settings, then you must also configure a rule for each device that you want to allow to connect with the settings for the time that the device is allowed to access the network.

• Win Media Player: Video goes full screen and cannot access controls

  All videos play automatically goes to full screen and I can't access controls by the keyboard or mouse. Sometimes crashes mode full screen.

  I tried setting the options of WMPlayer nothing helps.

  Any suggestions?

  Hello

  When the video begins to make double click in the middle of full screen and it should bring back the standard window. You can also try using the ALT + F4 key combination.

• simulate the track access control with labview

  Hello

  I want to simulate a track with labview access control.

  This is the procedure:

  vehicle is located in front of a door, antenna check access control, if that's ok the traffic light turns green and the gate of the student.

  I thank very you much for helping me.

  Hi hot wheels,.

  I think it will be useful for you

• rundll32exe error when tryng to access control panel

  How and where can I find a free solution for rundll\32\exe error message while tryng to access control panel

  Hello

  (1) what is the operating system that you use on the computer?
  (2) have you made changes on the computer?
  (3) what is the accurate and complete error message you get?
  Follow these methods.
  Method 1: Follow the steps in the article.
  Note: You will need a Windows XP CD to perform this operation.
   
  Cannot find the Rundll32.exe file when you open Control Panel

  http://support.Microsoft.com/kb/812340

  Method 2: Run the analysis of file system (CFS) auditor to repair corrupted files.

  http://support.Microsoft.com/kb/310747

  Note: You will need a Windows XP CD to perform this operation.
  I hope this helps!

• I have a laptop Dell Latitude D610 Windows XP Professional. Can't access control panel, add or remove files or anything else.

  I can't access control panel because I get the message that this file is missing from local disk c.   Windows\system32\rundll32.exe

  I've looked everywhere.  Help! I'm going nuts!

  I can't access control panel because I get the message that this file is missing from local disk c.   Windows\system32\rundll32.exe

  I've looked everywhere.  Help! I'm going nuts!

  Have a complete analysis of the virus...

  Then do this...

  1. Put the CD ROM Windows XP disc in the CD ROM drive
  2. Click Startand then click run.
  3. Type expand X : \i386\rundll32.ex_ c:\windows\system32\rundll32.exe in the Open box, where X is the letter of your CD drive.
  4. Restart the computer.

  Already answered here...

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-files/Windows-cannot-find-cwindowssystem32rundll32exe/664c5b59-515C-472e-A872-a41f3e0562c1

• Repair Windows scam - cannot control panel access control or workstation "Windows Explorer has encountered a problem and needs to close."

  Original title: repair Windows scam - Can can't Access Control Panel or workstation

  My system has been recently infected with "Windows" repair"virus. I managed to delete using Super Anti-Spyware, but all my desktop shortcuts are gone (hidden) so I downloaded "Unhide.exe" and get all my shortcuts. Most of them seems to be working as before, but there are a few, such as 'My Computer', ' Panel, "My Documents", or even "Windows Explorer", which I can't access.» When I try to open them, I get this popup box saying "Windows Explorer has encountered a problem and needs to close" how much he out me of my office of kicks.

  Any suggestions?

  Thank you!

  Brian

  The best way to solve this maybe just create a new user account, transfer your personal data to this account, and then delete the old account. Make sure that you perform the system restore after you did the new account and everything works fine. To purge the system restore, simply disable it then again. Be aware that the creation of a new user account is not the means to get rid of malware. But it is perhaps the best way to get rid of some of the after effects. However, I recommend you scan with Malwarebytes before running these instructions. After scanning you may not create the new account.

  In addition, Jose is correct. Good number of new forms of malware prevent the start in safe mode. Trying to force booting in SafeMode with msconfig, you end up with a boot loop.

• Does anyone has a software that can give the ip address for any device connected to the laptop, as the Council of access control?

  Hello team,

  Does anyone has a software that can give the ip address for any device connected to the laptop, as the Council of access control?

  Thanks for help

  LookAtLAN network monitoring is one of these tools.

  SuperScan is probably better, but I have not tried.

• my taskbar disappears and I can't close properly. Cannot access control panel

  Hi please can help you.

  If I leave the computer for a while, the screen freezes.

  I can't stop the computer correctly in the start menu, but have to do it from the Tower

  by pressing the button until the orange indicator light appears. Instead of going to start, log off etc.

  I can't access control panel either, but everything else seems to work very well.

  Also, the taskbar disappears.

  Help, please.   best regards and thank you joan

  Hi joanmorgan

  
  Method 1:

  You can check if you have found errors in the case where the Viewer, and if you find one, let us know the details. Check out the link for more details below:
  http://support.Microsoft.com/kb/308427

  Method 2:
  You can even perform the clean boot on the Windows XP computer and check if you can identify the application that is causing problems in the clean boot state. To perform the clean boot follow step 1, mentioned in the article, below, and then try again checking in this state of boot -

  http://support.Microsoft.com/kb/310353

  If the issue is resolved check what non-Microsoft service or program is at the origin of the problem. referring to article and following the other steps.
  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  a. Click Start, type msconfig.exe in the start search box and press ENTER.
  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

  b. on the general tab, click the Normal startup option and then click OK.

  c. When you are prompted to restart the computer, click on restart.

  I hope this helps.

• Account administrator and user, Windows 7 Premium access control problems

  We have a problem with a HP/Compaq Windows 7 Premium machine 4 months old and we cannot allow any request of the UAC.

  An account on the machine is a "Standard user" without password, but when we do something like put to day or what the icon shield it and require permission from the Admin we cannot.  The alert box will appear asking you to Admin password (with no box to type, besides whom there is no account active Admin but maybe only the Super Admin account 'hidden' which is off), but also the 'Yes' button is gray and only 'no' can be clicked.

  Support PC World were unnecessary, saying full install, their stock response.  Tried enabling the 'super administrator' hidden account think it worked once before when I need administrator rights to install the software, but as unable to run CMD prompt as administrator (again because UAC comes into play), I can't seem to do.

  So now stuck with the new machine and messing around on the fighting with the OS: s I thought rightly or wrongly that the activation of the hidden Admin account would do, I'm sure that's what I did before, but I keep hitting the problem guest UAC as described above.  Therefore, the following does not work:

  ______________________________________

  Click Start, type: CMD
  In the results, click on the right button CMD
  Click on "Run as Administrator"
  at the command prompt, type: net user administrator / active: yes

  Log off, and then log on to the administrator account
  Make the appropriate changes to your accounts

  Log on to your account
  Click Start, type: CMD
  In the results, click on the right button CMD
  Click on "Run as Administrator"
  at the command prompt, type: net user administrator / active: No.

  ______________________________________

  I tried to click with the right button on CMD prompt and checking run them as administrator on the drop down menu, but UAC prompt comes up, no luck.  Also tried setting to "Run as Administrator" when raising the properties by right-clicking... same result.

  Also tried cursing at the machine... same result: o

  Any help appreciated because I'm sure that I've done it before, and there is a way to pass the CMD prompt.

  Ah finally solved.

  HP Compaq machines have their own start to use for recovery etc. software (accessible by pressing the ESC key), so I went into the system recovery using the backup utility to make sure that the external hard drive was last week 'missing' files, and then cancelled rather than clicking on the side to supplement a system recovery.

  This gave me the traditional options of safe mode,... networks, prompt etc.  Choose Mode safe mode with command prompt and Super Administrator hidden account was visible as well as the Standard user.  Choose the account super administrator, connected, activated the password protect and define it.

  At the command prompt enter:

  NET user administrator / Active: Yes

  Restarted as Standard and UAC user now works fine.

  It all started because of a need to install Open Office and then down the line a cutting machine, interrupting a Microsoft Backup, which could not be restarted without password Admin and user access control issues as described above.

  Is not to hide the Admin user at all now!

• Lockout C drive. Cannot change the permissions, cannot not disable the user account control, unable to open the access control editor, cannot change the property.

  While trying to change the folder permissions for a second user on my computer, I did something that I lock my C drive.

  When I log in with the administrator account, I get the following popup:

  C:\Windows\System32\SystemPropertiesComputerName.exe
  Windows cannot access the specified device, path or file. You can not have the appropriate permissions to access the item.

  I am not able to access denied drive from C to all 'access '.

  When I right click on the C drive and select Properties > Security tab > go on, said the popup "cannot open the access control editor. Access is denied. »

  When you select Properties > Security tab > advanced > owner tab > continue, current owner says "unable to display current owner. Can not change, cannot be changed.

  I can't turn off user account control, nothing happens when I click the icon or the text.

  I was able to create the 'hidden' administrator account, but I can't do anything from there, either.

  Any suggestions?

  Hello

  Recovery disk will not help you perform the upgrade on the spot. I suggest to organise a Windows Vista DVD and try to perform the upgrade in-place.

• N2848 - MAC access control lists

  Hello

  Our network uses multiple switches Dell 2848 and we want to restrict access to the network to a certain group of MAC addresses.

  Someone at - it experience of this?  In the menu, I see this option ' home > switch > Network Security > Access Control Lists > MAC Access Control Lists'.  I can't find any explanation of this function in the manuals PDF I downloaded wasn't so not sure if I was in the right place.

  Any help would be greatly appreciated.

  This allows in fact to only allow the MAC addresses you want. There is an inherited deny this rule at the end of the ACL.

  You must first make a MAC ACL rule and then apply this rule to the desired interface. You can learn more on page 657: http://dell.to/1WFiTWT

  It can also be configured through the CLI. The CLI guide includes some info and examples onpPage 276: http://dell.to/1SVu3Bp

  I hope this helps.

• Access controls and IP addresses

  Could someone clarify something for me, make access controls restrict access to a volume of only specified IP address or allow access to any IP address of a computer that includes the specified IP address...

  An example of what I mean...

  I have a volume 1, which has a record of access control of 192.168.1.10 and nobody else.

  I have a server with two connections isci switching, 192.168.1.10 and 192.168.1.11

  When I look at the current connections on the volume it shows both the addresses IP as having connections - but I would like to only one of the for connect.

  Additional ACLs are hidden, being created on the fly.  This prevents also maxing out limit ACL and speed up the login process.

  Ideally iSCSI should be on its own subnet, with dedicated network cards.  You can use the remote installation wizard to define subnets are available for iSCSI use.

  It is a characteristic of the ACHIEVEMENT.  Initiator iSCSI MS if SUCCESS did not you will need to define each path connection manually for each volume.   Successfully, you need only one discovery entry, HIT does the rest.

• Access control for iSCSI

  Hi all

  I have two EqualLogic PS6500E. On volumes of, created under the access control list , I applied and restriction of IP address to allow only the beach of 192.168.1. *.

  Since a few days under connections , I noticed traffic/connections from other IP addresses (not high-end 192.168.1. *) actually configured on the servers of access to this volume.

  Any ideas how is this possible?

  Thanks in advance

  Sébastien

  Sorry, I wanted to add.  Run the Remote Setup Wizard and select the option "Configure MPIO".  That will list all subnets available on this server.  Exclude everything except the iSCSI subnet.

  Kind regards