Access controls and IP addresses

Similar Questions

• Access control and security group

  Hi all

  I need to know about the access control and what data are suitable for the security group and roles if I have the script like this:

  i. There are 2 different app namely ARA (96 branches with different types of reports) and TRACS400 (6 branches with different types of reports)

  II al ' ARA, users of Branch01 can NOT check Branch02.

  III. different report type is measured by Branch01 and Branch02 are different.

  IV. in Branch01, there are some reports are Read (Cannot download) only and some reports are read and write (downloadable).

  My questions are:

  1. from the above scenario, do I need create all the 96 security group and assign it to different leadership roles?

  2. How can I control read and write access, as I have tested the READ access the user is still able to download the report.

  3. How can I control to branch 01, report Type A is a read and report Type B read and write access?

  4. I noticed that if I use the account, the security group can be used be limited to 50 only security groups. Is this good? I may be an application later in the future. These 2 request for test only. But if I do not use the account, there are any number of security groups that can be used?

  Appreciate for your help.

  Hi aziela

  As mentioned by the friends of the forum, it is advisable to have the minimum security group given that its impact on the scalability of the application (rule). Accounts provide the best security solution of dimension view group.

  Security group corresponds to the role, role is mapped to the users. The permissions are obtained at the level of role-SG.

  Accounts are mapped directly to users. So you can have a precise control at the level of the user (eliminating the abstraction of the role).

  All these aspects are impacting performance where rule of thumb is mentioned in the documentation. In general, if a user belongs to many groups and accounts then it will take more time to process the request of content for this user.

  w.r.t. prohibiting the read-only users so that they will not be able to download content, there is a setting, please try option mentioned in this link http://docs.oracle.com/cd/E14571_01/doc.1111/e10792/e01_interface001.htm#CACCFHHA

  WRT performance calculation, see http://docs.oracle.com/cd/E14571_01/doc.1111/e10792/c03_security003.htm#CSMSP143

  Hope this helps

• Political strategy of access control and Intrusion

  Hi all

  I am a student for certification ips.

  I do not understand the difference between the political Intrusion and access control strategy...
  Maybe the difference is: ACP's ip and the control ports and Intrusion policy antivirus, file inspection etc etc?

  Thanks in advance

  Specify you rules in your access control strategy.

  For each of these rules, you can ad a political Intrusion and a file.

• What are access controls and what would put them... anyone know a website... totally lost

  Directions for use:
  For scenarios that follow, identify the data that should be protected. Recommend how implement you one or more of the following commands for given scenarios and justify your recommendation:
  § Administrative controls
  § Logical and technical controls
  § Material controls
  § Software controls
  § Physical controls

  Scenarios:
  1 shovels and shingles are a small building composed of 12 computers with wifi band society.
  2 top ads is a small advertising consisting of 12 computers with wifi band company. All employees communicate using smartphones.
  3 NetSecIT is a multinational company that IT services to business made up of 120 000 computers that have access to the Internet and 45 000 servers. All employees to communicate using smartphones and electronic mail. Number of employees work from home and travel.
  4. out of stock of parts is a defense contractor that creates pieces of communication for the military. All employees to communicate using smartphones and electronic mail.
  5. confidential Services Inc. is a subsidiary of military support composed of 14,000,000 computers with Internet access and 250 000 servers. All employees must have security clearances, and they communicate mainly with the help of e-mail and BlackBerry devices

  Does working from home that you are required to give your course of study? If yes then you would be better to study your course material. If no, you must use a consultant rather than volunteers invite you to do the work for you for free.

• To access the controls and their values in different JFrames and forms

  Hi all - is it possible to access controls and their associated information? For example, in my old .NET application, I got a form where users could enter usernames/people with disabilities and also preferences for the launch of other external tools. The user filled in the text boxes and made a few selections on combo boxes etc. - I then recorded in an ini file which is loaded at run time. Then from anywhere in the application I could do something like:
  
  Dim strUserName As String = frmUserSettings.txtUserName.Text//for username
  Dim optLocalorRemote as String = frmUserSettings.cmbLocalorRemote.SelectedItem.ToString () //for selected item in the drop-down list box
  Dim optSomeOption as Object = frmSomeForm.SomeControl.Value //etc etc...
  
  You can call any control in any form and obtain its associated variables and also call any method belonging to him in .NET or void. Is it possible to do in the frameworks for Swing? I did some research but can't seem to find the equivalent in Swing
  
  If it is not possible can then someone point me in the right direction on how to do it? Do I need to define a class and I then have to instantiate each control in the class and have the getters/setters or y at - it an easier way? I essentially have an obligation to access related information across different forms in the application
  
  I found this:
  http://StackOverflow.com/questions/4958600/get-a-swing-component-by-name
  But this seems to return the control names and no values?
  
  Thanks in advance for any advice or help - we appreciate it! :)

  Hello Matt,

  for what you do with files .ini, java provides the java.util.Properties class.
  To access the other JFrames and forms (JPanels), you pass a reference to this framework/Panel to the place (class or method) where you want to retrieve information from this framework/Panel.
  Example:

  public class MyFrame extends JFrame {
    JPanel myPanel1= new JPanel(...);
  ...
    MyVeryOwnPanel mvop= new MyVeryOwnPanel(myPanel1,...);
  }
  

  Now within mvop, you can look at what happened to myPanel1.

  HTH

• Win Media Player: Video goes full screen and cannot access controls

  All videos play automatically goes to full screen and I can't access controls by the keyboard or mouse. Sometimes crashes mode full screen.

  I tried setting the options of WMPlayer nothing helps.

  Any suggestions?

  Hello

  When the video begins to make double click in the middle of full screen and it should bring back the standard window. You can also try using the ALT + F4 key combination.

• Repair Windows scam - cannot control panel access control or workstation "Windows Explorer has encountered a problem and needs to close."

  Original title: repair Windows scam - Can can't Access Control Panel or workstation

  My system has been recently infected with "Windows" repair"virus. I managed to delete using Super Anti-Spyware, but all my desktop shortcuts are gone (hidden) so I downloaded "Unhide.exe" and get all my shortcuts. Most of them seems to be working as before, but there are a few, such as 'My Computer', ' Panel, "My Documents", or even "Windows Explorer", which I can't access.» When I try to open them, I get this popup box saying "Windows Explorer has encountered a problem and needs to close" how much he out me of my office of kicks.

  Any suggestions?

  Thank you!

  Brian

  The best way to solve this maybe just create a new user account, transfer your personal data to this account, and then delete the old account. Make sure that you perform the system restore after you did the new account and everything works fine. To purge the system restore, simply disable it then again. Be aware that the creation of a new user account is not the means to get rid of malware. But it is perhaps the best way to get rid of some of the after effects. However, I recommend you scan with Malwarebytes before running these instructions. After scanning you may not create the new account.

  In addition, Jose is correct. Good number of new forms of malware prevent the start in safe mode. Trying to force booting in SafeMode with msconfig, you end up with a boot loop.

• Does anyone has a software that can give the ip address for any device connected to the laptop, as the Council of access control?

  Hello team,

  Does anyone has a software that can give the ip address for any device connected to the laptop, as the Council of access control?

  Thanks for help

  LookAtLAN network monitoring is one of these tools.

  SuperScan is probably better, but I have not tried.

• my taskbar disappears and I can't close properly. Cannot access control panel

  Hi please can help you.

  If I leave the computer for a while, the screen freezes.

  I can't stop the computer correctly in the start menu, but have to do it from the Tower

  by pressing the button until the orange indicator light appears. Instead of going to start, log off etc.

  I can't access control panel either, but everything else seems to work very well.

  Also, the taskbar disappears.

  Help, please.   best regards and thank you joan

  Hi joanmorgan

  
  Method 1:

  You can check if you have found errors in the case where the Viewer, and if you find one, let us know the details. Check out the link for more details below:
  http://support.Microsoft.com/kb/308427

  Method 2:
  You can even perform the clean boot on the Windows XP computer and check if you can identify the application that is causing problems in the clean boot state. To perform the clean boot follow step 1, mentioned in the article, below, and then try again checking in this state of boot -

  http://support.Microsoft.com/kb/310353

  If the issue is resolved check what non-Microsoft service or program is at the origin of the problem. referring to article and following the other steps.
  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  a. Click Start, type msconfig.exe in the start search box and press ENTER.
  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

  b. on the general tab, click the Normal startup option and then click OK.

  c. When you are prompted to restart the computer, click on restart.

  I hope this helps.

• Account administrator and user, Windows 7 Premium access control problems

  We have a problem with a HP/Compaq Windows 7 Premium machine 4 months old and we cannot allow any request of the UAC.

  An account on the machine is a "Standard user" without password, but when we do something like put to day or what the icon shield it and require permission from the Admin we cannot.  The alert box will appear asking you to Admin password (with no box to type, besides whom there is no account active Admin but maybe only the Super Admin account 'hidden' which is off), but also the 'Yes' button is gray and only 'no' can be clicked.

  Support PC World were unnecessary, saying full install, their stock response.  Tried enabling the 'super administrator' hidden account think it worked once before when I need administrator rights to install the software, but as unable to run CMD prompt as administrator (again because UAC comes into play), I can't seem to do.

  So now stuck with the new machine and messing around on the fighting with the OS: s I thought rightly or wrongly that the activation of the hidden Admin account would do, I'm sure that's what I did before, but I keep hitting the problem guest UAC as described above.  Therefore, the following does not work:

  ______________________________________

  Click Start, type: CMD
  In the results, click on the right button CMD
  Click on "Run as Administrator"
  at the command prompt, type: net user administrator / active: yes

  Log off, and then log on to the administrator account
  Make the appropriate changes to your accounts

  Log on to your account
  Click Start, type: CMD
  In the results, click on the right button CMD
  Click on "Run as Administrator"
  at the command prompt, type: net user administrator / active: No.

  ______________________________________

  I tried to click with the right button on CMD prompt and checking run them as administrator on the drop down menu, but UAC prompt comes up, no luck.  Also tried setting to "Run as Administrator" when raising the properties by right-clicking... same result.

  Also tried cursing at the machine... same result: o

  Any help appreciated because I'm sure that I've done it before, and there is a way to pass the CMD prompt.

  Ah finally solved.

  HP Compaq machines have their own start to use for recovery etc. software (accessible by pressing the ESC key), so I went into the system recovery using the backup utility to make sure that the external hard drive was last week 'missing' files, and then cancelled rather than clicking on the side to supplement a system recovery.

  This gave me the traditional options of safe mode,... networks, prompt etc.  Choose Mode safe mode with command prompt and Super Administrator hidden account was visible as well as the Standard user.  Choose the account super administrator, connected, activated the password protect and define it.

  At the command prompt enter:

  NET user administrator / Active: Yes

  Restarted as Standard and UAC user now works fine.

  It all started because of a need to install Open Office and then down the line a cutting machine, interrupting a Microsoft Backup, which could not be restarted without password Admin and user access control issues as described above.

  Is not to hide the Admin user at all now!

• Access control table and select any table privs

  Can we restrict access to a table of other users that have select any table privs? I think of the CAE, but not familiar with it. Not sure VPD can ensure the owner have access fulll and others not. Any idea?
  
  -Denis

  >
  Can we restrict access to a table of other users that have select any table privs? I think of the CAE, but not familiar with it. Not sure VPD can ensure the owner have access fulll and others not. Any idea?
  >

  Yes it is possible with the SRM. Users with SELECT ANY TABLE would see no lines with the following method, which assumes that the owner of the table is HR:

  connect system/pwofsystem
  create or replace function only_owner (schema varchar2, tab varchar2) return varchar2 is
  begin
  return 'user=''HR'' ';
  end;
  /
  
  BEGIN
    dbms_rls.add_policy(object_schema => 'hr',
    object_name => 'departments',
    policy_name => 'hr_policy',
    function_schema =>'system',
    policy_function => 'only_owner'
  );
  END;
  /
  

  Only the DB HR user is now able to see the rows in the table.
  And sys, which has the privilege of POLICE TAX-FREE ACCESS.

  Kind regards
  Uwe

  http://uhesse.WordPress.com

• Airport network guess without the access control list.

  In fact, on the page AirPort base stations: on the guest network feature, Apple write this:

  "If enabled, access control lists will be applied to both the main Wi - Fi network and the network of comments. If you use Access Control Lists, you will need to add your comments network clients to the list so that they can join. »

  I think that on previous versions of the airport, it was possible to use the network to guess without the access control list.

  The idea is that only the (primary) private network should use this access control list.

  The network presupposes that is give for direct and temporary access (not necessary to access Airport utility, ask your friend and note its Mac address, restart the resort from the airport... for every friend who invited you to home)!

  Is there a workaround resolution?

  Unless you have set up a default rule 'No access' in the timed access settings, then it is not necessary to set up a rule for each "guest." Just give them the password for the network of comments and they will be able to access the network.

  IF... you have set a default rule 'No access' in the timed access settings, then you must also configure a rule for each device that you want to allow to connect with the settings for the time that the device is allowed to access the network.

• How do I get the name of a duplicated or created control and add a reminder

  Hi all

  According to the number of entry points I need, I duplicate a digital or an input string to the DuplicateCtrl function. My question is, how do I get the name and id of the control that has been created, and how can I assign a callback to it? Alternatively, it would be better to create a fresh ctrl instead of duplicate?

  Thanks in advance!

  Hi TurboMetrologist,

  Why are you trying to get the name of constant control? Remember that you cannot use this name to address control; control names are in fact simply the macros in the file associated with the UIR, include in other words, the preprocessed compiler code and everywhere where the names of PANEL_CONTROL replaces the digital value as parameters to functions (and therefore 'control' parameter is an int value and not a char *)

  That's why NewCtrl () or DuplicateCtrl () functions return a control ID: this is the handle to the new object, the only way to handle it. You will need to store this handle in a nonvolatile memory so that you can access durng life program.

  In addition, there are other ways to assign a meaning to a control to pass on the name of constant control. For example, you can use the callbackData parameter to differentiate the different copies of a control.

  Let me explain with an example. You said that you need several entries (dynamically created that you don't know in advance how many of them use); a solution could be:

  • Design a master copy of a control in the IUR Editor, where it is easy to customize; also assign a callback function, if it must be common to all copies of the control
  • Assign a value to this control callbackData, programmatically for example SetCtrlAttribute (...,..., ATTR_CALLBACK_DATA, (void *) 1);
  • Duplicate the control, and then assign a different callbackData
    for (i = 2; I have< 5;="" i++)="">
    handle = DuplicateCtrl (...);
    SetCtrlAttribute (..., handle, ATTR_CALLBACK_DATA, (void *) I);
    }

  By operating this way, whenever the reminder of control is triggered by any control, it will receive the callbackData assigned, and you will be able to differentiate your code with a simple switch:

  switch (callbackData (int)) {}

  case 1: / / the master controls

  break;

  case 2: / / first dual control

  break;

  }

• Still access Youtube and Facebook when both are blocked?

  Why does show that my child is still access youtube and facebook when both are blocked?

  Hi all

  Family safety records as a child Web sites visits as part of the activity reports tracking feature.

  Even if the site is blocked, it will still show on the activity reports that the site is visited. This will tell you which site is the child trying to access. It is natural that this information reflected in reports if you do not have to worry if the website that you have blocked. Just make sure that you have blocked the site and the customer to parental control settings are updated.

  For more detailed information on accessible websites or visited by your child, we suggest that you go to the tab Web activity under activity tracking. In this tab, you will see the web address and the measures taken (blocked, permitted) by parental control.

  Thank you.

• N2848 - MAC access control lists

  Hello

  Our network uses multiple switches Dell 2848 and we want to restrict access to the network to a certain group of MAC addresses.

  Someone at - it experience of this?  In the menu, I see this option ' home > switch > Network Security > Access Control Lists > MAC Access Control Lists'.  I can't find any explanation of this function in the manuals PDF I downloaded wasn't so not sure if I was in the right place.

  Any help would be greatly appreciated.

  This allows in fact to only allow the MAC addresses you want. There is an inherited deny this rule at the end of the ACL.

  You must first make a MAC ACL rule and then apply this rule to the desired interface. You can learn more on page 657: http://dell.to/1WFiTWT

  It can also be configured through the CLI. The CLI guide includes some info and examples onpPage 276: http://dell.to/1SVu3Bp

  I hope this helps.