Access denied in the States WMC that I am logged in as a guest, but I am administrator

Similar Questions

• access denied to the local disc (c :))

  access denied to the local disc (c :))

  Read the article below and post back with all the relevant information. Thank you.

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/1467f44b-ee27-4F7D-98d7-f1c4b35b3395

  Windows Update forum is one of the three forums that doesn't have different forums for different versions of Windows (Internet Explorer and the game are the others).  With this in mind, we ask that you postat LEAST the following information.  If you don't know how to find some of the information and then post what you can and let us know that you need help to find information.

  Minimum information to validate:
  Version of Windows and Service pack level. (Windows XP Home Edition, SP3; Vista Home Premium, SP1; Windows 7 Ultimate, etc...)
  Post also if you use 32-bit or the 64 bit version of Windows.

  Update the number of the last update installed before any problem.  If you do not know the number of update, then give the date that the update has been installed.  The number of updates update failed.

  Error code updates failed or if you think an update caused a blue screen, give the blue screen error codes.

  Other information to validate:
  Measures already taken to correct the problem and the results of the measures.

  If the question is never happened before with other updates.

  A few other useful parts are:
  What program antivirus you use, if it is up-to-date, and there has never been any other installed antivirus program.
  If your version of Windows has been upgraded from a previous version or if it came with (or clean installed with) the version you are currently using.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think. Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• Access denied to the DVD player

  I put in a new DVD player, on the one hand it was not recognized, but I deleted the upper and lower filters in the registry and that worked. He seemed to be ok but had a read of a disc error and then it was not yet known - now he's here but access is denied. When I go into windows Explorer it does not show sound, but it does if I click on computer - when I right click on it and go to security, unless I put a disk in it says that the device is not ready. When I click ok on the Security tab it says info from security requested is either unavailable or cannot be displayed. When I go to the Advanced tab, I can try to put in info but it will not save all that access is denied... I logged on my account directors and the drive is there and accept DVD / CD although there seemed no mistakes to actually do something to play.
  I tried the system restore, but that came with a missing sfi.dat error in order to not make changes either... I tried to uninstall the device, it's ok and reinstall it when I reboot but nothing has changed and access is denied.
  Is - it there anyway to remove the current news for her to the computer and start again? Did nero or other software likely to be the cause?
  Ideas please!
  Windows 7 home
  Thank you
  Rebecca

  I had to open disk management, right-click on the CD/DVD drive and open properties, click the Hardware tab, click the properties button, click the driver tab and uninstall the driver.

  Then click on the Action of disk management menu, click on analyze the disks, it adds the drive and the error disappeared!

• I get an error, access denied to the C:\Users\myuser\AppData\Local\Temp

  Original title: access denied to the C:\Users\myuser\AppData\Local\Temp

  Hello

  I have a problem with the Windows 7 C:\Users\myuser\AppData\Local\Temp temp folder. Sort randomly, I lose access to this folder, in the sense that if I open a cmd terminal and I try to cd to that folder, it gives an access denied error (at least that I start cmd as administrator). I noticed in the list of permissions on this folder does not appear the SYSTEM. I read somewhere that this is the problem, so I added back, and then it worked. Unfortunately it disappears every day the list of permissions, and I have to put in place every day which is annoying. Do you know what could cause this problem? How can I see which changes these permissions?
  Thank you
  Razvan

  Hi Razvan,

  Thanks for posting your query in Microsoft Community

  According the information you have provided, I understand that you found error access denied when using certain commands to the command prompt. I will certainly help you in this matter.

  1. have you logged as administrator?

  2. do you have an antivirus software installed?

  Some commands that you run at a command prompt, you need the administrative privileges for the good functioning of Windows.

  See the link.

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-open-a-file-if-I-get-an-access-denied-message

  If you face problems more when working with Windows Mail on the Microsoft Community Forum.

• Access denied to the d ' training

  Hi I know this has been posted often enough here, but I already tried this:

  Here you go:
  1 restart in Safe Mode.
  2 log in under an administrator account.
  3. click on start
  4. type the three letters cmd and press ENTER.
  5. type the following commands and press ENTER after each:
  takeown /f D:\/a r d y
  ICACLS D:\/t/c/accorder administrators: F System: F everyone: F
  (Answer "Yes" when prompted "Are you sure?")

  during the execution of these actions I get access denied errors config.msi and system volume information.

  I can't download files on drive d or install some programms on this, but I can copy files to it very well and open the files of it. I really don't want to format this drive, if it can be avoided.

  Hello

  I see that you are getting the error message access denied.

  Quick questions:

  1. Installation of operating system?
  2. Is d: drive your recovery disk?

  You can click with the right button on the "run cmd.exe as Administrator" and then repeat the steps you mentioned in your post.

  Note:

  The system volume information may still get access denied, which is normal. It is not recommended to change it.

  You can also check this link:

  Check out the following link and check:

  How to open a file if I get an access denied message?

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-open-a-file-if-I-get-an-access-denied-message

  I hope that helps!

  If the problem persists, or you need help on Windows let us know.

• access denied to the combustion process

  When I try to burn a disc double layer the trial started, no problem found, project size 7.9 G.

  Then, during the sorting process begins: "building navigation, strengthen the system of files (sorting) and a pop lights saying"access denied"and the process hangs there.» During the editing process, I made to halfway through a test to a 4.7 G disk, and that went well spent, I burned a 4.7 G disc with some of the material.

  Anyone has any suggestions that it may be. Thanks for the reply.

  Chris

  Begin again by a right click and choose 'run as administrator '. Try again. This version fixes a number of problems.

• FTP error. Access denied. The file does not exist (only on the roots)?

  Having a strange problem.

  I just installed CS 5.5 and got one of my sites all over the place. I can connect to my remote server very well and download to any directory other than the root?

  If I do, then I get this error (see below). This happens only when I try and put the files at the root, don't know why. I tried all the little things like:

  -liability of the rocker

  -site to redefine

  .....

  I can use any other FTP program and I can not put the files in the ROOT, so it's just a thing of dreamweaver 5.5. I also tried my Dreamweaver CS3 on my old mac and it works like a charm!

  Any suggestions?

  Thank you!

  Started the: 18/05/11 13:57

  index2.php - error - FTP is an error - can not put index2.php.  Access denied.  The file exists may not, or there could be a permission problem.   Make sure you have permission on the server and the server is properly configured.

  Activity of the incomplete file. 1 file (s) or folder (s) have not been filled.

  Files with errors: 1
  index2.php

  Finished: 05/18/11-13:57

  The FIXED.

  In looking at the FTP log, he's in trouble with a locked file STATSHISTORY.

  So, I just deleted

• The message says that it has a paper jam or paper but there is paper in it.

  My printer has a paper jam that I corrected, but it will not print even though even he sends paper thru with nothing on it. The message says that it has a paper jam or paper but there is paper in it. Sent several things to print but quere said there is nothing to print.  Help!

  Contact the manufacturer of the printer.  It is not a Windows problem.

  Good luck.

• How can I reinstall Adobe Creative Suite 6 on my new pc? the last pc broke down until I'm uninstalled the program. I tried to log on my account adobe but can't find where do?

  How can I reinstall Adobe Creative Suite 6 on my new pc? the last pc broke down until I'm uninstalled the program. I tried to log on my account adobe but can't find where do

  Download and Installation Help-

  https://helpx.Adobe.com/download-install.html

  CS6 - http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html

  You can also download the demo version of the software through the page linked below and then use your current serial number to activate it.

  Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.

  CS6: http://prodesigntools.com/adobe-cs6-direct-download-links.html

  Find the serial number of your Adobe product quickly

• Access denied for the files that I am recovering from a backup

  A lot of my music files were accidentally deleted, but they are still in my computer under protection of owner but the computer indicates that access is denied. I also get a message that .net Framework is not installed, even if I install.  I tried to figure this on my own, but I can't, so I hope someone here can help me out.

  Thank you!

  Hello

  ·        When it asks for the installation of .NET framework?

  ·        Where did you install the .net framework and how, thanks to Windows updates?

  There are many .net framework available updates that must be installed on the system.

  ·        What version of the .net framework is installed on the system and what is the version prompting to be installed on the system?

  I suggest you to check in the patches installed on the system if the .net framework is installed on the system or not.

  See whichWindows updates are installed

  http://Windows.Microsoft.com/en-us/Windows-Vista/see-which-Windows-updates-are-installed

  Install updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/install-Windows-updates

  If you have deleted the files on the system, I suggest you follow the steps mentioned in the article below.

  Recover lost or deleted files

  http://Windows.Microsoft.com/en-us/Windows-Vista/recover-lost-or-deleted-files

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• access denied on the C: drive due to the destruction of user name accidentally safety on the properties of the c: drive

  By chance, I deleted all the names of users and groups in the security properties of the C: drive

  shortly after that I tried to access the C: drive and discovered that access was limited to it.

  I tried to use the Security Editor, but I'm also locked down because I don't have permission, even if I'm running the active user in administration settings.

  It is very annoying because I have most of my computer files on the C: drive, and I am unable to run application shortcuts from the desktop as the directory of all the shortcuts applicaions lead on the C: drive, which is is not accessible.

  So far, I tried to disabled UAC and other services concerning the name of user and groups, but also "access denied"...

  I'm not able to run CMD and RUN.exe of normal mode, but I can not in safe mode with command prompt,

  I therefore believe that any possible solution must be done under mode safe mode with CMD.

  I also tried to follow the instructions, but I had no success because the instructions was for someone with a vista and some of the directories mentioned files there is not applicatible for Windows 7.

  http://forums.techguy.org/Windows-Vista/831578-cant-regain-adminstrator-access.html (post #10)

  I heard that formatting the drive can bring back the factory settings and the previous user, but put names in form is not an option for me, I never run'ed a backup of the C: drive or its contents, thus losing all that data would be catastrophic for my financial and emotional state.

  Is their way of bringing user names I have both in the security properties of the C: drive?

  Hi Xerovoid,

  You can try the steps below.

  Step 1

  A. Click Start > computer

  B. right-click on the C: drive, click Properties.

  C. click on the Security tab

  D. click the Advanced button > owner > Edit

  E. make sure the replace the owner of subcontainers and objects box ischecked

  F. click apply, Ok

  G. wait until it changes ownership. (may take a while)

  H. check if the problem persists.

  Step 2

  If the above does not help you solve the problem then try the system restore on your computer.
  http://Windows.Microsoft.com/en-us/Windows7/what-is-system-restore

  I hope this helps.

  Bindu R - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Keychain issue - Allow, Deny or always allow. Deny is the only option that works.

  I really hope that someone can help me. Since arriving to a new Mac Pro (from a 1.1 to a 3.1), I have problems with my keychain in more than one application.

  For example, if I want to use back to my Mac and I click on share screen... I am prompted with a message that asks me if I want to 'Allow' Keychain Access, 'Decline' or 'Always allow'. By clicking on "Allow" or always allow ' translates to nothing happens at all. The popup remains and that's it. However if I opt for 'Decline', it allows me to use Back to My Mac and continue as if I had said to allow.

  Another example, I just knew was this, I opened Safari on my mac, sailed to iCloud.com and before I could use the keychain to auto-fill my login and my password, the guest appeared with the same 3 options. And still the only option that would allow me to go forward was "Deny", although, as always, he let me use the keychain and the connection. Strange.

  I'm running El Capitan too and it seems to no longer be an option in Keychain Access to run a repair.

  Anyone have any ideas?

  Please take these steps to resynchronize the iCloud keychain. Your keychain on iCloud and other Apple devices will be unaffected. Take step 2 only if step 1 does not resolve the problem.

  Step 1

  Back up all data.

  Open the iCloud preferences window and uncheck the box for Keychain. You will be prompted to delete the keychain local iCloud. Confirm - the data will remain on the servers. Then re-check the box. Follow one of the procedures described in this article to support to implement the iCloud Keychain on an additional device. Test.

  Step 2

  If your problems persist, uncheck the keychain again and continue.

  Triple-click on the line below on this page to select, then copy the text to the Clipboard by pressing Control-C key combination:

  ~/Library/Keychains

  In the Finder, select

  Go ▹ go to the folder...

  from the menu bar and paste it into the box that opens by pressing command + V. You won't see what you pasted a newline being included. Press return.

  A folder named "Key ring" should open. Inside, it is a subfolder with a similar long names (but not the same as) that:

  421DE5CA-D745-3AC1-91B0-CE5FC0ABA128

  The above is only an example; your will have a different name for the same general shape. Drag the subfolder (not the key ring file) to the trash and empty.

  Restart the computer and re - activate iCloud keychain.

• Access denied on the opening controls

  Trying to enter the recommended such command in Windows Update error 80246005 error handling to allow writing to the Catroot2 folder, I get the message "Access denied to c:\windows\system32\catroot2", even thougn, I am the administrator.
  This folder is write - protected, and I'm not able to change this attribute.
  So how to enter the command or access privilege?
  Thank you
  Ricky

  Moderator moved the thread to the Windows Update Forum to learn more focused on coverage.

  Ricky Sujan

  You make sure you running CMD as administrator? You are able to quit successfully all the other services mentioned in the recommended steps?

  <><><><><><><><><><><><>

  Check your environment and determine if you are logged in with an administrator account

  http://support.Microsoft.com/GP/Admin

  <><><><><><><><><><><><>

  1. run high CMD

  2. click on start toreduce this includes this image and then type cmd in the box start the search .

  3 right-click cmd in the programs list and then click run as administrator. Collapse this includes this imageIf you are prompted for an administrator password or a confirmation, type your password or click continue

  4. at the command prompt, enter the desired command and press ENTER.

  <><><><><><><><><><><><>

  If you need to confirm that you have administrator rights, and you follow the steps to run as administrator. Then, we will take possession of your system drive:

  1 click on Start-> click computer-> Local disk (default is C:)

  2. right click on the Windows folder for which you want to set permissions, click Propertiesand then click the Security tab.

  3. click on Advanced to open the Advanced security settings for dialog box.

  4. click on the owner tab, click on change. If you are prompted for an administrator password or a confirmation, type your password or click on continue.

  5. in the new Advanced security settings for box, in the to a change in ownership: field, select your user name and Verify the replace the owner of subcontainers and objects. Click OK, repeat for the remaining squares. (If your username does not appear click the button other users or groups to add your account).

  6. test the command you want to run again.

  <><><><><><><><><><><><>

  Please report your results so that we can help you. Please use the community support for Microsoft Vista.

  Rami
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• "Access denied" for the administrator

  I have only my account (like my name and "Computer administrator") and the comments "the guest account is disabled. Even with that, I get "Access denied" when I try to delete the "System Volume Information" (has two verses in the archive according to my antivirus software). What is the next step to the top of "Computer administrator" who will make me even better access. I really want to be the boss of this thing, not the tail which is moved.

  System Volume Information is a protected operating system file, and users cannot remove it.  It can contain files created by System Restore .  To remove content System Volume Information , turn off System Restore , then turn on again. That will delete all restore points, then create a new one.

  Note that infections in System Volume Information cannot become active and cause damage to the system unless you intentionally run the system restore and restore the system to a date and hour earlier.

  Boulder computer Maven
  Most Microsoft Valuable Professional

• I receive error Code: 0 x 80070005 (access denied) for the KB2698365 & KB2719985 updates

  The environment is Windows XP SP3

  -Windows Update fails for these 2 updates

  -Fixit research and 'fixed' a problem to update storage location.

  -Windows Update still does not work

  -Download the update on Microsoft.com

  -Manual installation fails with 'Access denied' during installation.

  Runnng Bit Defender but it too fails when you try to automatically install these 2 updates.

  Yes, I am the administrator and the only user on the machine.

  Thoughts?  Help?

  THX!

  Hello

  1. what ran fixit?

  2. what version of Windows XP are you using (whether x32bit or x64bit)?

  3. you have made no changes to the computer before the broadcast took place?

  Follow the steps:

  Method 1:

   

  Follow the article:

  http://support.Microsoft.com/kb/968003

  Method 2: To run only the fixit for Windows update reset component

  http://support.Microsoft.com/kb/KB971058

  Restart the computer and the monitor upgrade of windows, if you get the same error then perform method 3.

  Method 3:  Run the Windows update agent and check.

  http://support.Microsoft.com/kb/943144

  a. click on the link above and download the appropriate version of Windows Agent and run it.

  b. restart the computer and control it upgrade of Windows.

  c. If the problem remains same run the run the Register the Wups2.dll file attach it in the above link and check for the issue.

  Registry warning:

  This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the link below to follow the steps to back up registry:

  http://support.Microsoft.com/kb/322756

  Hope the above information is helpful.