Access DMZ
Reposting because it has got a little buried...
I have a PIX 515e with a DMZ interface. This interface is an FTP server.
I can access the internet from inside LAN and DMZ server. The internet can access the server in DMZ for FTP - ing. However, the inside LAN cannot access the FTP server. I have a static mapping inside the DMZ:
static (inside, dmz) 172.16.255.254 192.168.40.250 netmask 255.255.255.255 0 0
But when I try to access the FTP, it indicates that the connection is refused. I don't have an ACL configured to allow access. I didn't think I should because I'm leaving a higher to a lower security zone, but maybe I'm wrong.
I also tried the bit 'alias' another post. No luck.
The PIX version is 6.3 (3). The IP address of the client is 192.168.40.10, the IP address of the server in the DMZ is 172.16.255.254. Fixup protocol ftp 21 is enabled. The syslog says:
305006: failure of the creation of translation portmap for tcp src Interior: 192.
168.40.10/51886 dst dmz:192.168.40.250/21
I looked in a few places to see if I could find a resolution based on what I saw in the system log, but it seemed that few suggestions were applicable. One who was (by emptying the translations) has not helped.
Thank you very much everyone, you all have really helped.
Hello
For the verification of references with this URL:
The URL above is for access to Mail on DMZ server, but you can override this to your FTP server.
Let me know if this helps or need extra help.
Jay
Tags: Cisco Security
Similar Questions
-
ASA inside access DMZ and return
Hi Expert,
How configure ASA to allow access from the inside to dmz host and also back?
Thank you.
Rgds,
To the Shaw feel Yeong
Hello
By default, access from inside the DMZ is permitted this access is through higher security level to lower the level of security.
Return to inside host traffic is automatically granted by ASA/firewall if the connection / translation is valid / exists.
Example:
Inside of the intellectual property: 192.168.1.1/24
DMZ: 172.16.1.1/24
2 two ways to do:
a. use nat & global command:
Global (dmz) 1 172.16.1.10 - 172.16.1.20--> help de.10 a.20 will be used inside hosts to access dmz
Global (dmz) 1 172.16.1.21--> all inside will use this IP like PAT, if the above range is fully used.
NAT (inside) 1 192.168.1.0 255.255.255.0
Note:
-Use the ACL if you need to control the type of service to pass through and apply on the inside of the interface.
b. static use of translation between inside and DMZ subnets:
static (inside, dmz) 192.168.1 192.168.1.0 netmask 255.0.0.0
Note:
-This will allow inside the host to initiate & access dmz and dmz to initiate & access to the inside (initiate connection to dmz host). When DMZ accessing inside the host, DMZ use inside physics/assigned host IP.
-Use the ACL if you need to control the type of service for cross and apply on time interfaces dmz & Interior.
Example of configuration:
* Watch under command "static (inside the dmz).
Rgds,
AK
-
Client VPN on PIX needs to access DMZ
VPN clients 3.5 ending PIX 6.X cannot access hosts on a PIX DMZ interface. Journal reports of error that there is no 'translation group available outside' for the subnet of the VPN Client (from the vpngroup pool).
I should add the VPN client subnet to a nat (outside) device?
Can I add it to the nat inside?
Can I just add static to the DMZ hosts within the subnet interface because VPN clients can access the inside hosts?
(I have the subnets in the nat 0 sheep ACL)
Thanks and greetings
JT
You'll need to add is nat 0. You say in your () you have an acl sheep, for the perimeter network or the inside interface? You use the same access list to the sheep inside and dmz? You should separate if you use separate access list. Is your pool of client on a different subnet than your home network and dmz? It must be something like this:
Customer IP local pool 192.168.1.1 - 192.168.1.254
IP, add inside 10.10.10.1 255.255.255.0
Add 10.10.20.1 dmz IP 255.255.255.0
access-list sheep by 10.10.10.0 ip 255.255.255.0 192.168.1.0 255.255.255.0
nonatdmz list of access by IP 10.10.20.0 255.255.255.0 192.168.1.0 255.255.255.0
NAT (inside) 0 access-list sheep
NAT (dmz) 0-list of access nonatdmz
If this is correct then clear x, wr mem, reload. I hope this helps.
Kurtis Durrett
PS
If he did not, only can recommend the upgrade your client and pix because that is exactly how it should look, and if its does not work you are facing an additional feature you want.
-
ASA Site, Remote Site cannot access DMZ to the Hub site
So I've been scratching my head and I just can't visualize what I what and how I want to do.
Here is the overview of my network:
Headquarters: ASA 5505
Site1: ASA 5505
Site2: ASA 5505
Training3: ASA 5505
All Sites are connected L2L to the location of the Headquarters with VPN Site to Site.
Since the HQ site I can ping each location by satellite, and each satellite location I can ping the HQ site. I will also mention that all other traffic is also correctly.
Here's my number: HQ site, I have a DMZ set up with a web/mail server. This mail/web server is accessible from my HQ LAN, but not from the satellite location. I need allow that.
What should I do?
My second question is that I want for satellite sites to see networks of eachother. I should create a VPN network between sites, or can this be solved in the same way that the question of the DMZ?
I enclose the show run from my ASA HQ
See the race HQ ASA
For the mail/web server that requires access on the remote site VPN tunnels, you must add the servers to the acl crypto, similar to the way you have it for network access. Make sure that both parties have the ACL in mirror. If you're natting from the DMZ to the outside, make sure you create an exemption from nat from the dmz to the outside for VPN traffic.
For the second question, because you have only three sites, I would recommend creating a tunnel from site to site between two satellite sites.
HTH
PS. If you found this post useful, please note it.
-
I use a PIX 506 6.1 (1) with such a DMZ. It's our first DMZ and I need assistance to access to the web server in the DMZ. We use a 172.16.0.0 subnet for the demilitarized zone and a 192.168.40.0 internal subnet. In 12.19.xxx.xx public subnet address. I added the following to the Web server on the PIX:
static (dmz, external) 12.19.xxx.xx 172.16.0.21 netmask 255.255.255.255 0 0
Global (dmz) 1 172.16.0.100 - 172.16.0.110
NAT (dmz) 1 172.16.0.0 255.255.255.0
I need to access the Web server in the DMZ to the 192.168.40.0 subnet.
What Miss me? Thank you
This access list do anything?
sheep 192.168.40.0 ip access-list allow 255.255.255.0 10.0.1.0 255.255.255.0
sheep 192.168.40.0 ip access-list allow 255.255.255.0 host 200.171.173.178
sheep 192.168.40.0 ip access-list allow 255.255.255.0 10.0.5.0 255.255.255.0
sheep 192.168.40.0 ip access-list allow 255.255.255.0 host 64.219.15.121
192.168.31.0 IP Access-list sheep 255.255.255.0 allow 10.0.5.0 255.255.255.0
192.168.31.0 IP Access-list sheep 255.255.255.0 allow host 64.219.15.121
sheep 192.168.40.0 ip access-list allow 255.255.255.0 10.0.3.0 255.255.255.0
sheep 192.168.40.0 ip access-list allow 255.255.255.0 host 148.233.144.17
sheep 192.168.40.0 ip access-list allow 255.255.255.0 10.0.4.0 255.255.255.0
sheep 192.168.40.0 ip access-list allow 255.255.255.0 host 148.235.11.101
sheep 192.168.40.0 ip access-list allow 255.255.255.0 10.0.7.0 255.255.255.0
sheep 192.168.40.0 ip access-list allow 255.255.255.0 host 66.136.190.89
sheep 192.168.40.0 ip access-list allow 255.255.255.0 10.0.6.0 255.255.255.0
sheep 192.168.40.0 ip access-list allow 255.255.255.0 host 64.22.205.74
sheep 192.168.40.0 ip access-list allow 255.255.255.0 10.0.0.0 255.255.255.0
I think that's the problem.
You should use something like that;
sheep 192.168.40.0 ip access-list allow 255.255.255.0 172.16.0.0 255.255.255.0
This should take from your home to your dmz.
-
I have a physical machine ina dmz. When I try to run the converter of vc and specify the IP address, I can't access this computer.
I can however configure a virtual machine and do not put in this vlan no problem
Hello
See http://itknowledgeexchange.techtarget.com/virtualization-pro/secure-method-to-p2v-across-security-zones/ for a way to P2V on security zones.
Best regards
Edward L. Haletky VMware communities user moderator, VMware vExpert 2009, url = http://www.virtualizationpractice.comvirtualization practical analyst [url]
"Now available: url = http://www.astroarch.com/wiki/index.php/VMware_Virtual_Infrastructure_Security' VMware vSphere (TM) and Virtual Infrastructure Security: securing the virtual environment ' [url]
Also available url = http://www.astroarch.com/wiki/index.php/VMWare_ESX_Server_in_the_Enterprise"VMWare ESX Server in the enterprise" [url]
[url =http://www.astroarch.com/wiki/index.php/Blog_Roll] SearchVMware Pro [url] | URL = http://www.astroarch.com/blog Blue Gears [url] | URL = http://www.astroarch.com/wiki/index.php/Top_Virtualization_Security_Links Top security virtualization [url] links | URL = http://www.astroarch.com/wiki/index.php/Virtualization_Security_Round_Table_Podcast Virtualization Security Table round Podcast [url] -
PIX 515E external SMTP and POP access DMZ
Hi all
I need help to solve the problem I am facing with the configuration.
config: PIX515E Ver 6.3 (1), with 6 interfaces outside the interface is connected to the Internet router and assigned public IP. Access to the Internet is configured for users connected inside Interface only using the command Nat & Global (Global off-1 Interface). I want to activate the access to electronic mail (SMTP & POP3) host couple in one of the demilitarized zone.
1 NAT configured on the interface & access list applied. If I allowed SMTP & POP only I even don't get a kick on the access list. If I have IP enable any of these hosts, I can surf the net, E-mail etc. After that when I restict to SMTP & POP only, it works for a while, after some time, I don't see any future success to the access list.
What could the case of such behavior, I missing something...?, I'm confused.
Thanks in advance.
Best regards
Ensure that you allow DNS from these hosts too (UDP/53), as they're going to do queries DNS for the remote host IP address and the domain MX record before they can establish a connection to the mail host relevant external.
If you allow all IP then they will be able to make the DNS query, then perform the connection SMTP/POP, and they will be cached DNS queries for awhile that's why it works for a while after the removal of the ACL. Once the DNS cache expires in these hosts, they must make another DNS query causing crashes so that you don't have him through the ACL permits.
-
ASA5500 - anyconnect VPN not access Web server in DMZ
I am at a loss. I enclose my config. I can access DMZ from within the network, but cannot access DMZ of VPN.
Any help would be great.
Rich
Also have question access to management 0/0 (192.168.1.1) of the Interior of the E0/1 (192.168.2.0) network
For your VPN - DMZ problem, the following is the most likely cause of your problem:
nat (inside,dmz) source static obj-dmz obj-dmz destination static obj-vpnpool obj-vpnpool
You should have in place:nat (outside,dmz) source static obj-vpnpool obj-vpnpool static obj-dmz obj-dmz
That's because VPN clients appear to come from the outside (to some purposes NAT) and the need to be exempt from NAT to access the resources of the DMZ. Management problems, the problem is asymmetric routing. When your packages arrive on the management UI, the ASA will try to send back traffic (starting with the 3-way TCP transfer protocol which will fail) through the inside interface but that won't work because ASA helped him, the source of the acknowledgement of receipt would SAA within the interface IP address, not the address of interface management in which the SYN sent. That's why most of the people have not historically used the management interface to ASA unless you have a real out-of-band network for management. Cisco recently introduced a separate fair management routing table, but you need to switch to 9.5 (1) or later to take advantage of that. -
Hello
for some reason I can't connect from the DMZ network to the internet.
Installation program:
Internal network: 192.168.0.0/255.255.255.0
DMZ: 192.168.100.0/255.255.255.0
WAN: connected to the cable-modem (DHCP)
Even with the firewall disabled.
So, for me, it seems that the unit is not "Routing" of the demilitarized zone.
At the moment I activated the firewall again and added two rules to give them access DMZ:
1 REFUSE all traffic to DMZ (any) to 192.168.0.0 - 192.168.0.255 (to deny access to the local network to DMZ)
2 ALLOW all traffic to DMZ (any) to EVERYTHING (in order to select "WAN" here, would be great!)
I had this problem before in the local network.
But I could solve this problem when I switched the "operating mode" 'router' for 'bridge '.
[Just a little note: after Linkysys support told me that the device if default!]
BTW... so far, I found no clue about the difference between these two modes.
Thanks a lot for your support
Who was I had the suspicion on the VLan to.
But I think that it is not completely right... you have a DMZ with a privat-ip-area, but these DMZ servers do not have access to internet (NAT number of DMZ in WAN) possible.
To be honest, I find the DMZ - of the implementation of the very strange LRT214.
No one expects such an implementation! And IMHO, this does not meet the definition of DMZ (see wikipedia).
-
AnyConnect client can not access local network
Hello
I have a problem with the Cisco anyconnect. Once clients are connected they cannot access anything whatsoever, including their default gateway.
Pool of the VPN client is on the same subnet as the LAN (139.16.1.x/24). Local network clients can access DMZ, VPN clients can ping computers on the local network, but they cannot access the DMZ.
I guess that any rule providing that traffic is absent but I m new with Cisco ASA and I m totally lost. I read as much as I could on this topic, but I do not understand which rule is necessary.
Thank you very much in advance for your support.
ASA release 9.4 (1)
!
ciscoasa hostname
activate the encrypted password of WmlxhdtfAnw9XbcA
TA.qizy4R//ChqQH encrypted passwd
names of
mask 139.16.1.50 - 139.16.1.80 255.255.255.0 IP local pool Pool_139
!
interface GigabitEthernet1/1
nameif outside
security-level 0
192.168.1.100 IP address 255.255.255.0
!
interface GigabitEthernet1/2
nameif inside
security-level 100
IP 139.16.1.1 255.255.255.0
!
interface GigabitEthernet1/3
nameif DMZ
security-level 50
IP 172.16.1.1 255.255.255.0
!
interface GigabitEthernet1/4
Shutdown
No nameif
no level of security
no ip address
!
interface GigabitEthernet1/5
Shutdown
No nameif
no level of security
no ip address
!
interface GigabitEthernet1/6
Shutdown
No nameif
no level of security
no ip address
!
interface GigabitEthernet1/7
Shutdown
No nameif
no level of security
no ip address
!
interface GigabitEthernet1/8
Shutdown
No nameif
no level of security
no ip address
!
Management1/1 interface
management only
nameif management
security-level 100
11.11.11.11 IP address 255.255.255.0
!
passive FTP mode
network obj_any object
subnet 0.0.0.0 0.0.0.0
internal subnet object-
139.16.1.0 subnet 255.255.255.0
network dmz subnet object
subnet 172.16.1.0 255.255.255.0
wialon Server external ip network object
Home 192.168.1.132
wialon-Server network objects
Home 172.16.1.69
Wialon-service-TCP object service
destination tcp source between 1 65535 21999 20100 service range
Wialon-service-UDP object service
destination service udp source between 0 65535 21999 20100 range
network of the NETWORK_OBJ_139.16.1.0_25 object
subnet 139.16.1.0 255.255.255.128
outside_acl list extended access permit tcp any object wialon-Server eq www
outside_acl list extended access allowed object Wialon-service-TCP any wialon-server object
outside_acl list extended access allowed object Wialon-service-UDP any wialon-server object
pager lines 24
asdm of logging of information
Outside 1500 MTU
Within 1500 MTU
MTU 1500 DMZ
management of MTU 1500
ICMP unreachable rate-limit 1 burst-size 1
don't allow no asdm history
ARP timeout 14400
no permit-nonconnected arp
NAT (inside, outside) static source any any static destination NETWORK_OBJ_139.16.1.0_25 NETWORK_OBJ_139.16.1.0_25 non-proxy-arp-search to itinerary
!
network obj_any object
dynamic NAT (all, outside) interface
internal subnet object-
NAT dynamic interface (indoor, outdoor)
wialon-Server network objects
NAT (DMZ, external) service wialon Server external ip static tcp www www
Access-group outside_acl in interface outside
Route outside 0.0.0.0 0.0.0.0 192.168.1.1 1
Timeout xlate 03:00
Pat-xlate timeout 0:00:30
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
Floating conn timeout 0:00:00
identity of the user by default-domain LOCAL
Enable http server
http 11.11.11.0 255.255.255.0 management
http 139.16.1.0 255.255.255.0 inside
No snmp server location
No snmp Server contact
service sw-reset button
Crypto ipsec ikev2 AES256 ipsec-proposal
Protocol esp encryption aes-256
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 ipsec-proposal AES192
Protocol esp encryption aes-192
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 ipsec-proposal AES
Esp aes encryption protocol
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 proposal ipsec 3DES
Esp 3des encryption protocol
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 ipsec-proposal OF
encryption protocol esp
Esp integrity sha - 1, md5 Protocol
Crypto ipsec pmtu aging infinite - the security association
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 define ikev2 AES256 AES192 AES 3DES ipsec-proposal OF
outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
outside_map interface card crypto outside
Crypto ca trustpoint ASDM_TrustPoint0
registration auto
domain name full ciscoasa.srdongato.null
E-mail [email protected] / * /
name of the object CN = srdongato
Serial number
Proxy-loc-transmitter
Configure CRL
Crypto ca trustpoint ASDM_Launcher_Access_TrustPoint_0
registration auto
full domain name no
name of the object CN = 139.16.1.1, CN = ciscoasa
ASDM_LAUNCHER key pair
Configure CRL
trustpool crypto ca policy
string encryption ca ASDM_TrustPoint0 certificates
certificate 09836256
30820381 30820269 a0030201 02020409 83625630 0d06092a 864886f7 0d 010105
05003050 31123010 06035504 03130973 72646f6e 6761746f 313 has 3012 06035504
05130b4a a 41443139 32323033 34343024 06092, 86 01090216 17636973 4886f70d
636f6173 612e7372 646f6e67 61746f2e 6e756c6c 31353132 30353036 301e170d
5a170d32 33333535 35313230 32303633 3335355a 30503112 30100603 55040313
09737264 6f6e6761 30120603 55040513 31393232 30333434 0b4a4144 746f313a
2a 864886 30240609 f70d0109 6973636f 02161763 6173612e 7372646f 6e676174
6f2e6e75 6c6c3082 0122300d 06092 has 86 01010105 00038201 0f003082 4886f70d
010a 0282 010100d 2 295e679c 153e8b6a d3f6131d 8ea646e3 aa0a5fa9 20e49259
ca895563 7e818047 033a4e8f 57f619e9 fa93bfd5 6c44141f b0abf2c0 8b86334e
bac63f41 99e6d676 c689dcf7 080f2715 038a8e1b 694a00de 7124565e a1948f09
8dbeffab c7c8a028 741c5b10 d0ede5e9 599f38fe 5b88f678 4decdc4b b 353, 6708
cfa2fbce f58be06e 18feba56 4b2b04a1 77773ec6 5c58d2ed d7ca4f17 980f0353
138bfe65 1b1165e6 7b6f94bb ab4d4286 e900178c 147a6dba 2427f38e e225030f
0a66d1eb 5075c57e 6d77e5bb 247f5bc3 8d3530f0 49dedf2d 21a24b5f daa08d98
690183cf e82a6b8d 5e489956 c5eecdbc 7fc2365c b629a52b 126b51e2 18590ed5
c9da8503 a639f102 03010001 a3633061 300f0603 551d 1301 01ff0405 30030101
ff300e06 03551d0f 0101ff04 86301f06 04030201 23 04183016 80143468 03551d
dec79103 0a91b530 1ada7e47 7e27b16d 4186301d 0603551d 0e041604 143468de
c791030a 91b5301a da7e477e 27b16d41 86300d 86f70d01 01050500 06 092 a 8648
003cdb04 03820101 8ef5ed31 c05c684b ad2b0062 96bfd39a ecb0a3fe 547aebe5
14b753e7 89f55827 3d4e0aa8 b8674e45 80d4c023 8e99a7b4 0907d 347 060a2fe4
fa6e0c2f 3b9cd708 a539c09f 7022d2ee fb6e2cf6 82b0e861 a2839a71 1512b3ec
e28664e9 732270c 9 d1c679d9 1eaf2ad5 31c3ff97 09aae869 88677a3d b 007, 5699
ecb3032e 2dd0f74f 81f9a8fb 79f30809 723bbdbf dfef4154 5ad6b012 a8f37093
481fa678 b44b0290 23390036 042828f3 5eefdc43 ebe52d26 78934455 9b4234a9
4146 166e5adc b431f12f 8d0fbf16 46306228 731c bfeebc43 34 76984 d2e6ebbc
88ca120a 96838694 d4f32884 963e7385 987ec6b0 dfa28d49 05ba5fa8 641bcfc7
ff92ac3c 52
quit smoking
string encryption ca ASDM_Launcher_Access_TrustPoint_0 certificates
Certificate 0 is 836256
308202cc a0030201 0202040a 0d06092a 83625630 864886f7 0d 010105 308201b 4
05003028 06035504 03130863 61736131 13301106 03550403 6973636f 3111300f
130a 3133 392e3136 2e312e31 31353132 30353036 35363236 5a170d32 301e170d
35313230 32303635 3632365a 30283111 55040313 08636973 636f6173 300f0603
61311330 11060355 0403130 3133392e 31362e31 2e313082 0122300d 06092 has 86
4886f70d 01010105 00038201 0f003082 010 has 0282 010100e7 a5c16e86 16c15a10
e018b868 bac7271a 30f1a3f8 ecb9c6b8 3ed4b1ad c9468f5e 287f2a7a 644f1496
c43a061e da927d09 a755b53e ed7c6a66 f2f1fb1e f944345c 86e08ce0 891c99b3
13101ab3 04963fad f91f987f 99f22a89 cd1e8c5a 5e4c026d 2cadd7b7 6620bbd1
b4a5135b 24ec886f fa061a06 dd536e96 1e483730 756c 4101 23f83a8d 944a7fbe
93c51d56 32ac0d17 ceb75f63 0ae24f07 f2c54e83 5b84ff00 16b0b899 c925c737
1765b 066 23 b 54645 bc419684 d09dd130 c1479949 68b0a779 df39b078 6fb0deb9
758b14c3 f0801faf f0ad60e1 a018ffba d769f867 3fe8e5fc 88ccc5b2 2319f5d4
617a78c4 74e7a64b 5c68276c 06ea57c1 d0ffce4b 358c4d02 03010001 300 d 0609
2a 864886 05050003 82010100 dff97c9f 4256fd47 8eb661fd d22ecea4 f70d0101
589eff09 958e01f1 a435a20e 5ed1cf19 af42e54d d61fc0ab cb2ee7ac 7fcb4513
1a44cc86 1e020d72 3a3f78d2 4 d 225177 857093d 9 f5fcf3c7 6e656d2b 54a0c522
f636b8cf 33c5ae34 ea340f32 85dff4c1 50165e7a e94de10b ced15752 0b3a76c1
2a50777b 20291106 a1a8a214 a 8 003716 680c15d4 ac3f7cc7 378f8f5f 38e3403f
f958c095 e549c8ed 4baf8cc5 bdcd230e 260754ea 953c3a4c eb01fef5 62b97e01
9f82ce6b f479dbdd 000c45af 8758b35f b4a958ee 32c4db3f 2ddc7385 dc05b0e3
78b609ba a9280841 2433ae87 5dd7a7c2 d5691068 1dc0eddc c23f99c5 3df8b1a5
aadbd82a 423f4ba8 563142bf 742771c 3
quit smoking
IKEv2 crypto policy 1
aes-256 encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
IKEv2 crypto policy 10
aes-192 encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
IKEv2 crypto policy 20
aes encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
IKEv2 crypto policy 30
3des encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
IKEv2 crypto policy 40
the Encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
Crypto ikev2 activate out of service the customer port 443
Crypto ikev2 access remote trustpoint ASDM_TrustPoint0
Telnet 139.16.1.0 255.255.255.0 inside
Telnet 11.11.11.0 255.255.255.0 management
Telnet timeout 5
without ssh stricthostkeycheck
SSH timeout 5
SSH group dh-Group1-sha1 key exchange
Console timeout 0
dhcpd outside auto_config
!
dhcpd address 172.16.1.69 - DMZ 172.16.1.69
dhcpd dns 87.216.1.65 87.216.1.66 DMZ interface
dhcpd option 3 ip 172.16.1.1 DMZ interface
dhcpd enable DMZ
!
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
SSL-trust outside ASDM_TrustPoint0 point
SSL-trust ASDM_Launcher_Access_TrustPoint_0 inside point
Trust ASDM_Launcher_Access_TrustPoint_0 inside the vpnlb-ip SSL-point
WebVPN
allow outside
AnyConnect image disk0:/anyconnect-win-3.1.12020-k9.pkg 1
AnyConnect profiles Wialon_client_profile disk0: / Wialon_client_profile.xml
AnyConnect enable
tunnel-group-list activate
Disable error recovery
internal GroupPolicy_Wialon group strategy
attributes of Group Policy GroupPolicy_Wialon
WINS server no
value of 192.168.1.1 DNS server
client ssl-VPN-tunnel-Protocol ikev2
by default no
WebVPN
AnyConnect value Wialon_client_profile type user profiles
dynamic-access-policy-registration DfltAccessPolicy
wialon_1 Wy2aFpAQTXQavfJD username encrypted password
wialon_2 4STJ9bvyWxOTxIyH encrypted password username
remote access to Wialon tunnel-group type
attributes global-tunnel-group Wialon
address pool Pool_139
Group Policy - by default-GroupPolicy_Wialon
tunnel-group Wialon webvpn-attributes
enable Wialon group-alias
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
Review the ip options
!
global service-policy global_policy
context of prompt hostname
no remote anonymous reporting call
Cryptochecksum:447ec315ae30818a98f705fb1bf3fd75Hello
You don't have NAT exemption the DMZ network to the pool of VPN traffic.
Please try to add the following statement to run:
nat (DMZ,outside) 1 source static any any destination static NETWORK_OBJ_139.16.1.0_25 NETWORK_OBJ_139.16.1.0_25 route-lookup
Also please delete the existing instruction manual nat "non-proxy-arp" statement, because it can cause problems like you the ip subnet address pool is identical to that of the Interior of the network.no nat (inside,outside) source static any any destination static NETWORK_OBJ_139.16.1.0_25 NETWORK_OBJ_139.16.1.0_25 no-proxy-arp route-lookup nat (inside,outside) 1 source static any any destination static NETWORK_OBJ_139.16.1.0_25 NETWORK_OBJ_139.16.1.0_25 route-lookup
Cordially Véronique -
The ASA 5510 DMZ configuration
I currently have an ASA 5510 with which I am configuring a HTTP/FTP host on a demilitarized zone. Currently the DMZ host is accessible outside but the hosts on the internal network can not access. I have a dedicated IP address for the host (1.1.1.228) DMZ and another IP for the PAT interface for internal clients (1.1.1.238). I know I'm missing a piece, either a statement nat() or a static(), please advise.
interface Ethernet0/0
Description Interface Outside
nameif outside
security-level 0
IP 1.1.1.238 255.255.255.240
!
interface Ethernet0/1
Inside the Interface Description
nameif inside
security-level 100
the IP 10.0.0.1 255.255.0.0
!
interface Ethernet0/2
DMZ Interface Description
nameif dmz
security-level 50
the IP 192.168.0.1 255.255.255.0
-partial outside the inbound ACL.
outside_access_in list extended access permit tcp any host 1.1.1.228 eq www
outside_access_in list extended access permit tcp any host 1.1.1.228 eq https
-ACL DMZ-
DMZ list extended access permit icmp any one
access-list extended DMZ permit tcp host 192.168.0.11 eq www everything
access-list extended DMZ permit tcp host 192.168.0.11 eq https all
access-list extended DMZ permit tcp host 192.168.0.11 eq ftp - data all
DMZ list extended access permit tcp host 192.168.0.11 eq ftp everything
Global 1 interface (outside)
NAT (inside) 0-list of access inside_outbound_nat0_acl
NAT (inside) 1 0.0.0.0 0.0.0.0
public static 1.1.1.231 (Interior, exterior) 10.0.0.85 netmask 255.255.255.255
static (dmz, outside) 1.1.1.228 192.168.0.11 netmask 255.255.255.255
Access-group outside_access_in in interface outside
Access-group interface dmz DMZ
Add:
static (inside, dmz) 10.0.0.0 mask 10.0.0.0 subnet 255.255.0.0
The statement above will allow the host to access DMZ hosts inside using DMZ devices own IPs and vice versa.
And, if necessary, use the ACL to restrict access to inside the DMZ, or DMZ inside.
See you soon!
AK
-
Inside the interface of access IPSec on PIX
Hi all
I need advice with the following problem.
I have PIX 515E with 3 interfaces inside.
DMZ and outside, to 6.3 (3). Is it possible to access DMZ more inside the interface with IPSec of CISCO VPN client? IPSec creates a tunnel, the customer
has a new address of the address pool, but
in the paper, I have a message: not found translation etc... When I try to
reach any device in the DMZ. The reason seems
be with nat (dmz) 0, which should be inside the DMZ (social security social security 50 0). Even if I use nat (dmz) 0-list of remote access apart from it does not work. Any tips?
Thank you
Zdenek
Hello
Can you check if you are able to access the DMZ from the inside? If so, then u shud be able to access DMZ to connect remotely. This is because once the VPN client obtains the IP address of the inside pool, it's as good as he is in your home LAN. You can try putting inside DMZ natting... I mean put this command nat 0 because inside the DMZ, which will allow access to DMZ devices inside.
-
I have an intranet with 3 PIX 515 6.3 Firewall, exterior, Interior and DMZ interface.
I want to access DMZ w/o NAT inside and outside, but want NAT to inside.
the addresses are
domestic 192.168.10.XX
DMZ 197.28.10.xx
outdoor 197.28.8.XX
Need help.
Have Web, FTP, and DNS on DMZ servers that must be available for outside and inside.
Can you ping the web and ftp servers of either inside or outside? How does the PIX itself? Otherwise, I look at the routing configuration (i.e. the default gateway) on each one and check that you have all the IP addresses configured doubles. Check also for any software firewall on servers.
Looks like you're closer...
-
This is explained? (Help)
6 Sep 05-2014 21:28:46 192.168.1.2 37071 199.195.xxx.xxx 37071 Dynamic translation TCP disassembly of any:192.168.1.2/37071 to Outside:199.195.xxx.xxx/37071 duration 0:00:31 Hello
I hope I can get this explained to me in simple terms so I understand what is happening. I thought that I had stated in my config that allowed all traffic of my internal networks to external networks, but my Active log is filled with packets are blocked and blocked. I'm just curious to know what is happening here. It is with UDP and TCP.
Thank you!
I have tons of them:
6 Sep 05-2014 21:36:59 192.168.1.2 62608 199.195.xxx.xxx 62608 Built a dynamic UDP conversion of any:192.168.1.2/62608 to Outside:199.195.xxx.xxx/62608 6 Sep 05-2014 21:36:59 199.195.xxx.x 53 192.168.1.2 62608 UDP connection disassembly 6952281 for Outside:199.195.xxx.x/53 for Inside:192.168.1.2/62608 duration 0: 00:00 152 bytes 6 Sep 05-2014 21:36:58 10.10.1.2 63481 199.195.xxx.xxx 63481 Dynamic translation UDP disassembly of any:10.10.1.2/63481 to Outside:199.195.xxx.xxx/63481 duration 0:00:31 The ASA config:
ASA5510 # sh run
: Saved
:
ASA Version 9.1 (4)
!
hostname ASA5510
domain maladomini.int
activate liqhNWIOSfzvir2g encrypted password
volatile xlate deny tcp any4 any4
volatile xlate deny tcp any4 any6
volatile xlate deny tcp any6 any4
volatile xlate deny tcp any6 any6
volatile xlate deny udp any4 any4 eq field
volatile xlate deny udp any4 any6 eq field
volatile xlate deny udp any6 any4 eq field
volatile xlate deny udp any6 any6 eq field
liqhNWIchangedvir2g encrypted passwd
names of
DNS-guard
!
interface Ethernet0/0
LAN Interface Description
nameif inside
security-level 100
IP 10.10.1.1 255.255.255.252
!
interface Ethernet0/1
Description of the WAN Interface
nameif outside
security-level 0
IP address 199.195.xxx.x 255.255.255.240
!
interface Ethernet0/2
DMZ description
nameif DMZ
security-level 100
IP 10.10.0.1 255.255.255.252
!
interface Ethernet0/3
VOIP description
nameif VOIP
security-level 100
IP 10.10.2.1 255.255.255.252
!
interface Management0/0
management only
Shutdown
nameif management
security-level 0
no ip address
!
boot system Disk0: / asa914 - k8.bin
passive FTP mode
DNS domain-lookup outside
DNS server-group DefaultDNS
Server name 199.195.xxx.x
Server name 205.171.2.65
Server name 205.171.3.65
domain maladomini.int
permit same-security-traffic inter-interface
the ROUTER-2811 object network
10.10.1.2 home
the ROUTER-2821 object network
Home 10.10.0.2
network of the WEBCAM-01 object
host 192.168.1.5
the DNS SERVER object network
host 192.168.1.2
the ROUTER-3745 object network
host 10.10.2.2
network of the RDP - DC1 object
host 192.168.1.2
PAT-SOURCE network object-group
object-network 10.10.1.0 255.255.255.252
object-network 10.10.0.0 255.255.255.252
network-object 10.10.2.0 255.255.255.252
object-network 192.168.0.0 255.255.255.0
object-network 172.16.10.0 255.255.255.0
object-network 172.16.20.0 255.255.255.0
object-network 128.162.1.0 255.255.255.0
object-network 128.162.10.0 255.255.255.0
object-network 128.162.20.0 255.255.255.0
the DM_INLINE_NETWORK_2 object-group network
network-host 98.22.xxx.xxx object
the Outside_access_in object-group network
object-group Protocol DM_INLINE_PROTOCOL_1
object-protocol gre
allow access-list of standard USERS 10.10.1.0 255.255.255.0
Outside_access_in list extended access permit tcp host object eq ROUTER-2811 98.22.xxx.xx ssh
Outside_access_in list extended access permit tcp host object eq ROUTER-2821 98.22.xxx.xx ssh
Outside_access_in list extended access permit tcp host 98.22.xxx.xx interface outside eq https
Outside_access_in list extended access permit tcp host object 98.22.xxx.xx WEBCAM-01 eq www
access-list extended Outside_access_in permit tcp host 98.22.xxx.xx eq 3389 RDP - DC1 object
IP 128.162.1.0 allow Access-list access-dmz-vlan1 extended 255.255.255.0 any
Note access-list access dmz allow all traffic in DC1
permit access-list extended access dmz ip 128.162.1.0 255.255.255.0 192.168.1.2 host
Note dmz access list only allow DNS traffic to the DNS server
permit access-list extended access dmz udp 128.162.1.0 255.255.255.0 192.168.1.2 host eq field
Note to dmz-access access-list ICMP allow devices in DC
permit access-list extended access dmz icmp 128.162.1.0 255.255.255.0 192.168.1.0 255.255.255.0
pager lines 24
Enable logging
asdm of logging of information
Within 1500 MTU
Outside 1500 MTU
management of MTU 1500
MTU 1500 DMZ
MTU 1500 VOIP
ICMP unreachable rate-limit 1 burst-size 1
ICMP deny everything outside
ASDM image disk0: / asdm - 715.bin
don't allow no asdm history
ARP timeout 14400
no permit-nonconnected arp
!
the ROUTER-2811 object network
NAT (inside, outside) interface static tcp ssh 222 service
the ROUTER-2821 object network
NAT (DMZ, outside) static interface tcp ssh 2222 service
network of the WEBCAM-01 object
NAT (inside, outside) interface static tcp 8080 www service
the ROUTER-3745 object network
NAT (VOIP, outdoor) static interface service tcp ssh 2223
network of the RDP - DC1 object
NAT (inside, outside) interface static service tcp 3389 3389
!
NAT interface (it is, outside) the after-service automatic PAT-SOURCE dynamic source
Access-group Outside_access_in in interface outside
!
router RIP
10.0.0.0 network
version 2
No Auto-resume
!
Route outside 0.0.0.0 0.0.0.0 199.195.xxx.xxx 1
Route inside 128.162.1.0 255.255.255.0 10.10.0.2 1
Route inside 128.162.10.0 255.255.255.0 10.10.0.2 1
Route inside 128.162.20.0 255.255.255.0 10.10.0.2 1
Route inside 172.16.10.0 255.255.255.0 10.10.1.2 1
Route inside 172.16.20.0 255.255.255.0 10.10.1.2 1
Route inside 192.168.1.0 255.255.255.0 10.10.1.2 1
Timeout xlate 03:00
Pat-xlate timeout 0:00:30
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
Floating conn timeout 0:00:00
dynamic-access-policy-registration DfltAccessPolicy
identity of the user by default-domain LOCAL
the ssh LOCAL console AAA authentication
Enable http server
http 0.0.0.0 0.0.0.0 inside
http 98.22.xxx.xxx 255.255.255.255 outside
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec pmtu aging infinite - the security association
trustpool crypto ca policy
Telnet timeout 5
SSH 0.0.0.0 0.0.0.0 inside
SSH 98.22.xxx.xxx 255.255.255.255 outside
SSH timeout 60
SSH version 2
SSH group dh-Group1-sha1 key exchange
Console timeout 0
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
NTP server 24.56.178.140 prefer external source
username redacted encrypted privilege 15
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns migrated_dns_map_1
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the migrated_dns_map_1 dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
Review the ip options
inspect the icmp
inspect the icmp error
inspect the pptp
!
global service-policy global_policy
context of prompt hostname
no remote anonymous reporting call
call-home
Profile of CiscoTAC-1
no active account
http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address
email address of destination [email protected] / * /
destination-mode http transport
Subscribe to alert-group diagnosis
Subscribe to alert-group environment
Subscribe to alert-group monthly periodic inventory
monthly periodicals to subscribe to alert-group configuration
daily periodic subscribe to alert-group telemetry
aes encryption password
Cryptochecksum:6f99e1277a392a926d04735c7f6a8c50
: endYou provided the log messages are NAT and messages from tell-establishment of connections, not blocks.
They are a normal part of the firewall, clean the table xlate and connections once they have expired.
-
8.3 Cisco ASA VPN problem
Hi all
I have some problems with the implementation of a VPN using IPSEC to establish a connection from Site to Site.
What I'm trying to Setup is the following, his IP address of a site can reach the beaches on site B and visa versa.
Site A Site B
192.168.10.0 172.16.0.0
192.168.20.0 IPSEC tunnel - 172.17.0.0 -.
192.168.30.0 172.18.0.0
I tested with one subnet to another subnet that works. However, when I try to group the objects it fails.
As an example I can set up a VPN of 192.168.20.0 to 172.18.0.0 that I can pass the traffic through but its unable to reach other subnets.
Excerpts from the config.
crypto ISAKMP allow outside
ACL
list of allowed outside_1_cryptomap ip access dmz LAN object dmz-network-remote
Tunnel group
tunnel-group
type ipsec-l2l IPSec-attributes tunnel-group
pre-shared key
ISAKMP retry threshold 10 keepalive 2
Phase 1
part of pre authentication isakmp crypto policy 10
crypto ISAKMP policy 10 3des encryption
crypto ISAKMP policy hash 10 sah
10 crypto isakmp policy group 2
crypto ISAKMP policy life 10 86400
Phase 2
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
card crypto outside_map 1 match address outside_1_cryptomap
card crypto outside_map 1 set pfs Group1
map 1 set outside_map crypto peer
card crypto outside_map 1 set of transformation-ESP-3DES-SHA
outside_map interface card crypto outside
NAT
NAT (inside, outside) 1 static source local-network-dmz dmz LAN destination static remote-network-dmz dmz-network distance
Any advice would be greatly appreciated.
Thank you.
Andrew,
Accroding to your config, each network is behind a different interface of the SAA, so you will need to change the NAT rule for each of them, for example:
NAT (DMZ_Zone, outside) 1 static source ad-network-local ad-network-local destination static obj obj-remote control-remote control
NAT (DB_Zone, outside) 1 static source local-network-db db-network-local destination static obj obj-remote control-remote control
NAT (AD_Zone, outside) 1 static source local-network-dmz dmz LAN destination static obj obj-remote-distance
Please review and give it a try.
I hope hear from you soon.
Maybe you are looking for
-
Hello! When can I buy unlocked iphone7? I want to use this phone in Europe! Thank you!
-
Printers, drop off the network
Since I installed El Capitan, my printer started dropping in 2 way communication - so I bought another printer, thinking that he was losing his reception. The same problem. It's as if they are going to sleep and not wake up. The next thing that I w
-
I get the following message is displayed on my phone: "the application Bluetooth Share (process com.android.bluetooth) has stopped unexpectedly. Please try again. » I was not able to connect to some of my bluetooth devices. It will pair but not conne
-
Linksys EA2700 VS. RV180-K9-NA
have a few last questions these routers EA2700 and 1 RV180-K9-NA. can it manage TWC ultimate speed 2. It's a very good reliable router, linksys be4 tried and some were not 3. can we manage several devices at the same time without slowing down? BTW, I
-
Help blackBerry Smartphones facebook 2.0 complaint.pl
Wen I try signin Dey said tht 'canoe reacher v servr fb for now... "But then in this case evrytime I try signin... BT I can sign in 4 m from my PC... Pl help.