AnyConnect client can not access local network

Similar Questions

• Windows XP sp3 can not access the network shares on vista after installing sp2

  I have a xp sp3 computer and another currently running vista Home premium sp2. Previously, I was able to access the network share on the xp computer before vista computer I installed sp1. Both computers were able to ping between them without problem.

  I've upgraded to sp2 because I had problems with windows media center, missing records. Upgrade of these issues fixed, but this means that roll back to sp1 is not an option for me to get operational network.

  Please do not post a standard answer on the network configuration. I am familiar with the standards requirements to share files between xp and vista and everything is set up correctly.  Like I said everything was working fine before the installation of sp2.

  If it is a known problem that is still not resolved, I'd appreciate knowing that information as well.

  Edit: Firewall been disabled during my troubleshooting

  After more work, I was able to solve my problem.  Update zone alarm solved my problem and helped my windows xp machine to access my Vista network shares.  As I pointed out in the original post, zone alarm firewall has been disabled during my troubleshooting.  Apparently, when disabled, the old version of zone alarm has always been the origin of the problem.

• I can only access local network with WPA/WPA2-PSK compatible. With out security I can connect without any problems.

  Issue of WPA/WPA2-PSK on Vista with SP2

  Belkin F7D2301 router, version1

  Vista Home Premium, Service Pack 2

  Network card: Atheros AR5007 802. 11a / g WiFi. version of the driver. 7.3.201.25.

  I am running 2-1 Vista, 1 Window7 laptop
  IPhone 2
  1 Wii game system

  When I installed initially the new router today, I installed it with WPA - PSK [TKIP] + security WPA2-PSK [AES] option. When in doing so, the Vista Home Premium (32 bit) would not connect to the internet. He would show local only access.

  But when I disable security it can connect to the internet. Rest of my devices are also able to connect to the internet regardless of WPA - PSK [TKIP] + WPA2-PSK [AES] or security number. I am running Vista with SP2.  That seems known problem Vista on Sp1. see http://support.microsoft.com/kb/935222.

  The network adapter I have is an Atheros AR5007 802. 11a / g WiFi with the version of the driver. 7.3.201.25.

  Any help would be very happy... I'm exhausted now try to solve this problem.

  SOLVED by updating the driver for Atheros. Atheros AR5007 802. 11a / g WiFi. It is not available on the official website. Check out this forum.

  http://forums.techguy.org/networking/981134-solved-NETGEAR-WNDR3700-incompatibilty-w.html

  Mysteryis yet to be sloverd

  • Why stop WPA has collaborated with the old version of Atheros AR5007 802. 11a / g WiFi. version of the driver. 7.3.201.25.
  • Why accpeting Linksys WRNT160 V3 ceased any connection.

  Thanks for the support

• Client can not access adobe to editing in the browser via an external server

  Hello

  I have completed the customer site of Muse and have downloaded on its external host without problem.

  In the site properties, enable editing in the browser is on.

  When I use the same external ftp site you want to connect, I get this:

  

  As my clients technician COMPUTER hosts many sites, I asked him to create a unique login for my client.

  If I try to upload the Web site by using this single connection, it is said that the 'folder does not appear to connect to site' & is not that recent changes are not displayed.

  Technician COMPUTER does not know what else to do...

  I'm a designer using Muse, as I have almost no idea re.code. Please can you help me?

  See you soon

  Could you describe a little more how you or your customer download site?

  With most FTP servers, in order to download your Web site correctly, you must set the name of the subfolder on your server, as the root of your FTP space is probably not the root of your site. On most of the servers, it is a folder named "www" or "htdocs" or another mysterious name.

• Remote vpn client can't access outside networks

  I configured a remote vpn ASA 5510 the wizard remote vpn. Users are able to get the vpn connection and access the internal network; but IMPOSSIBLE to

  access the outside network. (For the internal network, I want to talk about network behind the vpn to ASA, outside networks refers to society outside the ASA).

  In short, the external network of the company has default route to the ROUTER1 points. The ROUTER1 has road for access network and a default route to the internet. The ASA has a default route to the ROUTER1 points. the ROUTER1 also has a route to the address of the user remote vpn refers to the ASA.

  Hope it wise.

  But I don't know if my nat statement is correct. below is my statement of nat, is there something obvious lack? There is no translation network here, routable internet addresses.

  NAT (inside) 0-list of access inside_nat0_outbound

  public static 111.1.0.0 (Interior, exterior) 111.1.0.0 netmask 255.255.255.0

  public static 111.1.1.0 (Interior, exterior) 111.1.1.0 netmask 255.255.255.0

  public static 111.1.2.0 (Interior, exterior) 111.1.2.0 netmask 255.255.255.0

  networks outside the company (111.1.3.0/24; 111.1.4.0/24)

  |

  |

  the user remote vpn <-------------->internet <--------------------->ROUTER1 - ASA - Cat6509 - inside the network

  Any suggestion is appreciated.

  Thank you

  have you enabled "same-security-traffic intra-interface.

• can not access shared folders & printers in windows 2003 server client XP pro sp3 systems error showing path network not found

  can not access shared folders & printers in windows 2003 server client XP pro sp3 systems error showing network not found path.

  After restarting pc for awhile, we can access shared folder & printer but after 30 minutes (more or less) again cannot access. In the printer folder connected printer displays status as long as it is impossible to connect to the win-2003 server. Please help me out of this problem because I support banking sector.

  Hello

  You can find the Server forums on TechNet support, please create a new post at the following link:

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

• Cisco vpn client to connect but can not access to the internal network

  Hi all

  I have a VPN configured on cisco 5540. My vpn was working fine, but suddenly there is a question that the cisco vpn client to connect but can not access to the internal network

  Any help would be much appreciated.

  Hi Samir,

  I suggest that you go to the ASA and check the configuration to make sure that it complies with the requirements according to the reference below link:

  http://www.Cisco.com/en/us/products/ps6120/products_configuration_example09186a00805734ae.shtml

  (The link above includes split tunneling, but this is just an option.

  Please paste the output of "sh cry ipsec his" here so that we can check if phase 2 is properly trained. I would say as you go to IPSEC vpn client on your PC and check increment in packets sent and received in the window 'status '.

  Let me know if this can help,

  See you soon,.

  Christian V

• When a user logs off Windows 7 x 64 session, the rest can not access the internet until the restart network card

  Hello! I found a problem with my system: when a user logs off Windows 7 x 64 session, the rest can not access the internet, until restarted network card. Reinstall NIC driver did not help. Problem appears on a built-in adapter, in the motherboard and a separate PCI card too.  Same router via its web interface is not accessible. Windows cannot automatically fix this problem after trying to diagnose a problem with his problem Diagnostic tool. After the diagnosis in the DETAILS window, MORE tests, it displays a message like this "computer remote can not receive a connection via the Internet (HTTP) Service Port". "Unplugging" a corresponding Local network connection and then reconnect solves the problem immediately. Switching between users, when two of them are connected do not cause this problem. Important: the problem occurs in the account of the user who was logged on the system FIRST after the PC was on, when the user disconnected on newspapers of a SECOND. If the SECOND user is logged in and the FIRST user disconnects, SECOND can still access the internet. It depends only on the sequence of the user's record, not on the particular user name. And one more interesting fact: after each user registered on and outside just for once, the problem seems to disappear until the PC is turned off and turn it back on!

  System details:

  Motherboard: ASUS P8Z77-VLK
  CPU: Intel Core i7 3770 K
  RAM: 8 GB
  OS: Windows 7 x 64

  Hi, Mahesh,

  and thank you very much for your help! Update firmware driver and router LAN did not help me get rid of my problem, but greatly improved my experience of networking in general. Anti-virus software was not guilty, also, but! I found the "iControl" network software, installed as part of Sogiciel 'AI Suite II' (that came on the CD of motherboard ASUS driverssoftware), runnning and causing not only the problem mentioned above, but would also decrease upload speed up to 0.3 MB/s, when download passes to nearly 100 Mbps! Moreover, searching the Internet, I have found a lot of complaints about the behavior of this software, so that people watch you the occasional installation of this piece... sweet ;) As "iControl network" has been uninstalled (not only turned off in the settings of 'Ai Suite II'!), I'm totally happy with my system performance.

  Best regards
  Greg

• My desktop computer shows that it is connected to the network. However I can not access the detained.

  without intwernet access network connection.

  My desktop computer shows that it is connected to the network. However I can not access the detained. Other computers using the wireless modem work fine. I'm NOT computer savvy, so I am at a loss. I ping tri3ed myself and the result is unanswered.

  Hello

  You can consult the following thread link and check.

  PING: transmit failed, error code 5.

  Important: The above link contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up and restore the registry, follow the steps from the link below:

  Back up the registry

• Can not access network drives after installation of Windows 8 Pro

  Hi all

  I have a concern with a PC in Windows 8.

  I am rebuilding a new laptop for a user. Successfully, I added to the domain and assigned privileges for the user. When I try to log on to the PC with the new user account, I can not access network drives. When I log in with my account, I am able to access the network without problem drives.

  When I'm on the user account I can see the other computers on the network as well. But for some reason I can't access network drives. Other computers on the domain are running Windows 7 Professional.Can someone help me with this?

  Thank you

  Hello

  As you are on a domain, I suggest you to post your query in the TechNet forum.

  http://social.technet.Microsoft.com/forums/en-us/w8itpronetworking/threads

  I hope this helps.

• AnyConnect VPN is not access to the ASA

  Hello

  I have an ASA 5512 - x configured as a hub AnyConnect VPN, but when I connect I can not access the firewall... I can ping the address 10.4.11.2 but I can not connect... No idea what to do? It's the running configuration:

  : Saved

  :

  ASA 1.0000 Version 2

  !

  asa-oi hostname

  domain xx.xx.xx.xx

  activate 7Hb0WWuK1NRtRaEy encrypted password

  2KFQnbNIdI.2KYOU encrypted passwd

  names of

  1.1.1.1 DefaultGW-outside name description default gateway outside

  name 10.4.11.1 description DefaultGW - Default Gateway inside Inside

  !

  interface GigabitEthernet0/0

  nameif inside

  security-level 100

  IP 10.4.11.2 255.255.255.0

  !

  interface GigabitEthernet0/5

  No nameif

  no level of security

  no ip address

  !

  interface GigabitEthernet0/5.2000

  VLAN 2000

  nameif outside

  security-level 0

  IP 1.1.1.2 255.255.255.252

  !

  interface Management0/0

  Shutdown

  No nameif

  no level of security

  no ip address

  management only

  !

  boot system Disk0: / asa861-2-smp - k8.bin

  passive FTP mode

  clock timezone BRST-3

  clock summer-time recurring BRDT 2 Sun Oct 0:00 Sun Feb 3 0:00

  DNS lookup field inside

  DNS domain-lookup outside

  DNS server-group DefaultDNS

  1.1.1.1 server name

  1.1.1.2 server name

  domain xx.xx.xx.xx

  permit same-security-traffic inter-interface

  permit same-security-traffic intra-interface

  network of the PoolAnyConnect object

  subnet 10.6.4.0 255.255.252.0

  access extensive list permits all ip a outside_in

  list of access by standard tunnel allowed 10.0.0.0 255.0.0.0

  pager lines 24

  Enable logging

  timestamp of the record

  exploitation forest-size of the buffer 1048576

  logging buffered information

  asdm of logging of information

  Within 1500 MTU

  Outside 1500 MTU

  mask 10.6.4.1 - 10.6.7.254 255.255.252.0 IP local pool PoolAnyConnect

  ICMP unreachable rate-limit 1 burst-size 1

  ICMP allow any inside

  ICMP allow all outside

  ASDM image disk0: / asdm - 66114.bin

  enable ASDM history

  ARP timeout 14400

  NAT (inside, outside) static source any any static destination PoolAnyConnect PoolAnyConnect non-proxy-arp-search to itinerary

  NAT (exterior, Interior) static source PoolAnyConnect PoolAnyConnect non-proxy-arp-search to itinerary

  Access-group outside_in in external interface

  Route outside 0.0.0.0 0.0.0.0 DefaultGW-outdoor 1

  Route inside 10.0.0.0 255.0.0.0 DefaultGW-Inside 1

  Timeout xlate 03:00

  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

  timeout tcp-proxy-reassembly 0:01:00

  Floating conn timeout 0:00:00

  dynamic-access-policy-registration DfltAccessPolicy

  AAA-Server LDAP protocol ldap

  AAA-server host 3.3.3.3 LDAP (inside)

  Timeout 5

  LDAP-base-dn o = xx

  LDAP-scope subtree

  LDAP-naming-attribute sAMAccountName

  novell server type

  identity of the user by default-domain LOCAL

  the ssh LOCAL console AAA authentication

  AAA authentication enable LOCAL console

  AAA authentication http LOCAL console

  Enable http server

  http 0.0.0.0 0.0.0.0 inside

  http 2.2.2.2 255.255.255.240 outside

  Telnet timeout 5

  SSH 0.0.0.0 0.0.0.0 inside

  SSH 2.2.2.2 255.255.255.240 outside

  SSH timeout 10

  Console timeout 10

  management-access inside

  a basic threat threat detection

  Statistics-list of access threat detection

  no statistical threat detection tcp-interception

  SSL cipher aes128-sha1 aes256-3des-sha1 sha1

  WebVPN

  allow outside

  AnyConnect essentials

  AnyConnect image disk0:/anyconnect-win-3.1.03103-k9.pkg 1

  AnyConnect enable

  tunnel-group-list activate

  internal GrpPolicyAnyConnect group strategy

  attributes of Group Policy GrpPolicyAnyConnect

  value of server DNS 1.1.1.1 1.1.1.2

  VPN - 1000 simultaneous connections

  client ssl-VPN-tunnel-Protocol

  Split-tunnel-policy tunnelspecified

  Split-tunnel-network-list value in tunnel

  field default value xx.xx.xx.xx

  admin Dp4l7Cmqr7SMHl.l encrypted privilege 15 password username

  tunnel-group AnyConnect type remote access

  tunnel-group AnyConnect General attributes

  address pool PoolAnyConnect

  LDAP authentication group-server

  Group Policy - by default-GrpPolicyAnyConnect

  tunnel-group AnyConnect webvpn-attributes

  enable AnyConnect group-alias

  !

  class-map inspection_default

  match default-inspection-traffic

  !

  !

  type of policy-card inspect dns preset_dns_map

  parameters

  maximum message length automatic of customer

  message-length maximum 512

  Policy-map global_policy

  class inspection_default

  inspect the ftp

  inspect h323 h225

  inspect the h323 ras

  inspect the rsh

  inspect the rtsp

  inspect esmtp

  inspect sqlnet

  inspect the skinny

  inspect sunrpc

  inspect xdmcp

  inspect the sip

  inspect the netbios

  inspect the tftp

  inspect the ctiqbe

  inspect the http

  inspect the dcerpc

  inspect the dns

  inspect the icmp

  inspect the icmp error

  inspect the they

  inspect the amp-ipsec

  inspect the mgcp

  inspect the pptp

  inspect the snmp

  !

  global service-policy global_policy

  context of prompt hostname

  no remote anonymous reporting call

  Cryptochecksum:9399e42e238b5824eebaa115c93ad924

  : end

  BTW, I changed the NAT configuration many attempts the problem, this is the current...

  YPU need to allow your client VPN address pool (10.6.4.1 mask - 10.6.7.254 255.255.252.0) ssh and http from 'outside' access, which is where they come from. Add them to the:

  http 0.0.0.0 0.0.0.0 inside

  http 2.2.2.2 255.255.255.240 outside

  SSH 0.0.0.0 0.0.0.0 inside

  SSH 2.2.2.2 255.255.255.240 outside

• K550 printer has a static IP address and I can not access!

  Long story short, the bonehead technician, who headed the school in front of me felt that he had to put everything on the static IP, including printers.

  Anyway, we have since got a new ISP that provided us with a router that functions as a DHCP server and automatically assigns IPs to all computers on the network and devices (unless we chose a static ip address manually). The new network streams of 192.168.168.XX while the old network is a completely different game (204.48.224.XX). Unfortunately, printers are still set to the old static IP and I can not access their web configuration pages to change because of their IP and walkways being inaccessible.

  I can connect by USB to a computer and set them up in USB if there's a way. I searched the manual and the help topics and couldn't find what I was looking for.

  Is it possible for me to give back the networking on my printer K550 except in web admin using the? Help, please. I am the only technician here and it's the first day of school. I have quite a few teachers angry on my hand

  I don't know anything about this printer, but I could find on page 46 of the Manual:

  To reset the network settings on the printer (HP Officejet Pro K550dtn/K550dtwn)
  1 press and hold / (the Configuration Page button), press (button) 3 times, and
  release / (the Configuration Page button). The power light flashes for a few seconds. Wait for the
  Power light is on.
  2. press on / (the Configuration Page button) to print the configuration page and verify that the
  network settings have been reset. By default, the name of the network (SSID) is "hpsetup" and the

  mode of communication is "ad hoc".

  You can read it yourself:

  http://74.125.93.132/search?q=cache:-hqin_s_t8EJ:h10032.www1.HP.com/CTG/manual/c00501024.PDF+reset+K550+printer&CD=9&HL=en&CT=clnk&GL=us&client=Firefox-a

• Can not access the updates XP, 0x8024400A error message.

  I reformatted my HARD drive, reloaded XP SP2 Home. Download IE 8. I need XP SP 3, but now I can not access the updates... 0x8024400A error message.

  Help please

  Hello

  Install SP3 by downloading and running from...

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=24

  You can ignore the text that says it's for network installations and also ignore the text advising windows/microsoft update if a single update of a PC.

  This should move your 0x8024400A problem. So try and get up-to-date with the Windows updates. You will probably have to go through Genuine Windows Validation.

  Tricky

• Error 1606: 'could not access location network & AppData%.

  Please help with Error 1606, "could not access location network & APPDATA%\.»  Can someone please provide a fix?

  This problem occurs because there is incorrect entries in the Shell folder of the user who is logged on to Microsoft Windows. When Windows Installer goes to the sale of Shell folder of the user who is logged on to the computer, Windows Installer cannot locate the correct entry. The solution is inhttp://support.microsoft.com/default.aspx/kb/886549.

  The steps to correct this problem involve editing the Windows registry.  Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk. I suggest that you first back up your registry as follows: http://windows.microsoft.com/en-US/windows-vista/Back-up-the-registry.

  Here are the steps to fix it.

  1. click on start, run, typeregedit in the Open box, and then click OK.

  2. look for the following registry key:

  HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell dossiers\

  3 remove the entries that show the path that is listed in the error message.

  886549 KBhttp://support.microsoft.com/default.aspx/kb/886549: Regedit open again. In the left pane, click User Shell Folders, point tonew, click expandable string value, type the value name that you want to restore (AppData) and then press ENTER. Right click on this value, clickchange, type the value in the value data for the value name box, and then clickOK. The value data must be: % USERPROFILE%\AppData\Roaming.

  Step 8 KB 886549 suggests that you also check the values in HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders. However, by fixing my problem, I had not to change values in the registry key. If this does not work, follow ALL the steps in the referenced article.

  Good luck. Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Computer shows as connected... but we can not access the internet.

  Original title: but alas... internet no.

  Recently, we had this problem where our shows as connected pc... but we can not access the internet.  What I've been able to solve, is that somehow my IP settings change.

  I'm going to "Obtain an IP address automatically" and "Obtain DNS server address automatically", but of course... when the problem occurs again I find that my "Obtain DNS server automatically an address" has been changed to "use the following DNS server address".

  What is causing my computer to change my settings?

  I think you're DIY too.  Normally, your computer and your wireless router assign dynamic IP addresses, and they change periodically - that is part of the security design.

  In your case, the DNS server is the router.

  Most of the time what you describe is your computer is able to find a wireless router but the router doesn't send an IP (its normal function).

  This is usually:

  1. Your Internet service provider is down or your connection to it is broken.  If this is the case there is nothing you can do about it.
  2. Your computer network security key does not match the one in the router.

  1 reset the modem & router.  Follow these instructions precisely: http://canadiantech.info/?page_id=136

  2. If that does not resolve the problem, you must remove this network from your list of networks to manage Windows 7.  Then try to connect again using the network key, you know.

  3. If this does not work, you will need to do a factory reset on the router and re - install the router according to the router set up instructions.

  4. If after all the above does not correct the problem, you must replace your router.