Similar Questions

• RDSH Apps on access HTML Horizon

  Hi all

  Published RDSH applications and offices to Horizon 6.1.0 build 2509221 and able to see applications and workstations on "Horizon View Client" and throw them but only on the offices 'Horizon access HTML' are appearing and does not show applications.

  Is this limitation to Horizon 6.1.0? If this isn't the case, I'm missing something here. Installing HTML access when installing Agent Horizon on Windows Server with applications and services RDSH.

  Thanks in advance.

  Praveen

  When you install the version of the view connection Server 6.0 Hosted Apps are not available through the HTML access.

  Users can continue to use the HTML version 2.6 access to connect to desktop view running Agent.

  To use the HTML access with hosted applications: HTML (version 3.4) access facility is available on the download page of Horizon 6 version 6.1.1.

  Please refer to: https://www.vmware.com/support/horizon-view/doc/horizon-611-view-release-notes.html#before_begin_requirements

• Access HTML option is not available on View Agent Install Server 2012 R2 RDS Server

  To all,

  I don't know if anyone has come across this. I've been setting up RDS Server based on Windows Server 2012 R2, and when I got to the point where I need to install the Agent from the view, I noticed that the HTML access option does not appear in the phase of the installation wizard feature selection. Therefore, access HTML for hosted applications does not work even when I activate access HTML on farms. I only noticed when I was trying to solve why the HTML access to hosted applications was not working.

  The RDS server in question is a physical server running Windows Server R2 2012 with all updates. I uninstalled the agent view, restart and then tried to install the Agent 6.2 view, but the option does not appear. Same thing when I tried the agent see 6.1.1. Any thoughts?

  Physical server is not supported by the HTML access, see details in the doc:

  https://www.VMware.com/PDF/horizon-view/horizon-HTML-access-3x-document.PDF

  Page 30,

  Host the RDS IMPORTANT must be installed on a virtual machine. Although it is possible to install the Agent on a physical machine view, the Blast protocol used with HTML access cannot access a physical machine. See Agent must be installed on a virtual machine.

• PeopleSoft framework 8,53 test - failed to access HTML document error

  I am a total newbie to PTF recording my first test. I have the framework running and am able to connect to the database. I'm recording my first test.
  
  From closed IE, I open the test recorder and click the 'House '. IE opens to my login page.
  
  I click on the record button and get a dialogue with "could not access HTML Document, please check your browser settings.
  
  I also tried to open a Peoplesoft session in the browser before you click on the folder with the same results.
  
  I use IE 9 on Windows 7. I tried to follow the Peoplebooks "Configure browser security settings" in "installing a PTF customer." However Internet - Security tab Options is not visible by me (IE version?, security locked?) so I can't add my domain name for the intranet zone security settings. What is the cause of my problem? (I have no problem accessing the site of Peoplesoft otherwise.)
  
  Any help is appreciated
  Dan

  You run everything "as Administrator"? If so, try running "regsvr32 Shdocvw.dll" at a command prompt and then try again. If this does not work, we take a deeper look. I also saw someone say activating protected mode, the same error correction for them, but if your security tab is grayed out, you can probably change this. For reference, the browser that I use for the TFP has not protected mode is enabled. Another thought, have you turned on "generate HTML for Testing" in the Web profile your currently using?

• View horizon 5.2 - can't loging via access HTML

  Hi all

  I followed these steps:

  1. I installed Vmware View html access in my opinion Horizon connection server without any problems.
  2. I installed "VMware-Horizon-View-5.2-Remote-Experience-Agent-1.0-1046150" in my VM that I'll use in my pool of test.
  3. I have build a new POOL and called a user test. Currently, all steps have been ok.

  But when I try to connect to my VDI I can connect via VIEW HORIZION Client but not via the html access. Via html access I can connect but I cannot connect to my VDI because it shows this message:

  You are allowed to use the system.

  Why work with customer view and not via the html access? Could someone help me?

  Concerning

  Go swimming on your desktop and select the check box for the HTML access.  Default value is uncheck.

  Please note desktop on Windows XP is to have a bug.  Only Windows 7 and 8 work.

• How to access html files in the folder htdcos of the OHS Server

  Hello
  
  I copied the folder $ORACLE_WT1/SST/htdocs location simple html file (hi.html). I had rebooted the instance of OSH after copying the file.
  
  I can't access this page with the URL http://ohshost:7777 / hi.html. The browser says "the requested page is not found.
  
  But I am able to access the page (index.html) by default without problems. Is that a configuration is required to access the custom in the htdocs directory html pages?
  
  Pls help.
  
  Thank you

  I think you have just the htdocs evil.

  Note that, in your httpd.conf file, the following entry is present:
  -DocumentRoot "${ORACLE_INSTANCE} /config/$ {COMPONENT_TYPE} / ${name} of the component / htdocs".

  in which ORACLE_INSTANCE is something like: / Oracle_WT1/instances instance1 / / (if you have not changed any directory during Setup)
  COMPONENT_TYPE is the OHS and the name of the component is ohs1.

  The directory will be: / Oracle_WT1/forums/instance1/config/OHS/ohs1/htdocs

• How can I access html files in an external library?

  Hello world

  Our application used for a single .cod (cdlc) but we decided to split our application into, at least, two binary: (cdlc) and resources (library). Html (help pages) are now stored in the resource library. Problem is that the UI is in the heart then when a user wants to load some html help pages to load them from the library of resources...

  In general, here's the code that we had before (one single binary) and used to work well:

  Class klass = Class.forName("net.package.ApplicationClassName").getClass();
  InputStream is = klass.getResourceAsStream("/" + localFile);
  

  Now, I just changed the name of the class to load with the class name of resource library where the html files are now located. Here's the new code:

  Class klass = Class.forName("net.package.ResourcesLibraryClassName").getClass();
  InputStream is = klass.getResourceAsStream("/" + localFile);
  

  The klass variable is initialized correctly so I can assume the library of resources has been identified but 's InputStream is null if...

  What is the right way to handle this kind of problem?

  Thanks in advance.

  It's how to read a resource of another module:

  ContentConnection cc = (ContentConnection) Connector.open ("cod://module/path_to_file");

  I have not found any documentation of RIM which says that it will work, but it's apparently. Another approach would be to define a class in cod of resources which exposes the resources through your own api.

• Access view horizon 5.3 HTML won't load - white screen

  I recently updated a view from 5.2 to 5.3 demo environment.  Now that the upgrade is complete, access HTML no longer works.  I have install access HTML on the login server component after the 5.3, as directed by VMware docs update.  I built the new Windows 7 and Windows 8.1 VMs and installed the agent, and then the pack remote experiment, according to the same docs.  If I connect to the server to display login and select Horizon View HTML Access, it prompts you to connect and then show me the pools that I set up.  When I click on a pool, the screen slides laterally to the Bureau and then sits on gray background and never loads.  Eventually the connection times out on the desktop of the target.  I tested with Windows 7 and 8.1 pools the base with the same results.  The two pool work very well in the native mode client.  I tried connecting from the security server and the login server internal with the same questions.  If someone has encountered this or could provide some troubleshooting resources, it would be great.  Here is a brief description of the environment:

  Connection to the server: Windows 2008R2 - view 5.3 with HTML access feature

  Security Server: Windows 2008R2 - view 5.3 (no firewall between the login server and security server - demo)

  Composer - Windows 2008R2 with SQL Server 2008R2 - composer 5.3 Server

  Pools:

  Pool 1 - persistent related Clone Windows 8.1

  Pool 2 - model persistent Windows 7

  vCenter: vCenter Unit 5.5

  The ESX servers: ESXi 5.5

  Well I thought about it.  I said to PCoIP external IP address to the internal IP address of the Security Server and no public IP address.  After fixing remote sessions that seem good.  That teaches me to update an environment at night when I'm already tired.  Thanks for the help Linjo!

• Unable to show the details of audit of page html/OPS in the tables in the access to the tracking page. Technology of OFA stack does not come in the tables.

  Hello

  I activated followed Access Page follow the details of the verification of the users who have accessed HTML pages Web OFA as clients/suppliers, etc. in active Instance.I the profile option JTF_PF_MASTER_ENABLED to true to the level site and other configurations.

  But I can't get the Web pages of the OAF/HTML details AC two front and back end tables after execution of the Page access Tracking Data Migration Program.

  I am able to see the single FORM and VERIFICATION Tech batteries and unable to see the OFA technology stack.

  Help us please how do I get the Audit details OFA pages and what should I do?

  But in the Instance of Vision with the same configuration, I'm able to view the audit details OFA/HTML pages of front end and back end tables. In this case, I am able to view the OAF Tech stack.

  Could you let me know what is missing in the extraction of the OAF technology stack front end as well as put an end to the rear when I tried getting a test?

  Thank you

  Aren

  What is the value that is defined for the profile option, "JTF_PF_ENABLED" where the tracking does not work?

  Thank you

• Horizon plugin 6 direct connection + HTML access

  Hello

  I just set up a display environment 6 horizon with a direct plugin successfully.

  Now, I try to get the most out of this area and by this test to complete the html access.

  I followed this guide:VMware KB: allowing HTML access with the plugin VMware Horizon view Agent Direct Connect 5.3 5.3 horizon that does not work.

  Can someone guide me through the steps necessary to access html in horizon 6 with direct access plugin?

  Kind regards

  Herb

  Setup to view 6 has a small difference with 5.x, you can try by following steps below:

  1. install View Agent

  2. install the plugin VADC

  3 get web client package: VMware-Horizon-View-HTML-Access-x.y.z-000000.zip

  4 install the IIS and configure the Web Client as steps d through KB

• How to enable HTML access in the office pool by using PowerShell script?

  Hello

  I use to create pools of auto related clones using a script PowerShell/PowerCLI Office. The script provides all the parameters required for the Add-AutomaticLinkedClonePool cmdlet and there is a lot of it! Creating pools in this way allows me to save about 100 clicks per pool.

  Now I want to enable access HTML for each pool, but I can't seem to find the name of the parameter.

  I checked the properties of the object returned by Get-pool-pool_id w7mw620 and compared to other similar properties office pool where access HTML has been disabled. I coulnd't not see any differences in the property values, which seem to make a significant difference for the setting "enable access HTML '.

  There was a property named "calculatedValues", which was true for one and False for the other office pool. I don't know what is the meaning of this property. Help the cmdlet Add-AutomaticLinkedClonePool or AutomaticLinkedClone-set to list this property.

  So... How can I set the property to allow access HTML from a PowerCLI script?

  Hello, in response to my own question again...

  On the basis of the above VBScript example, I invented this PowerShell code snippet that does the work of activation / deactivation of HTML access to one or more funds pools, by adding or removing 'BLAST' to the allowed protocols. It's a beast of a code, and I think that this code can still be optimized/shortcut. It works for me. It allows the use of wildcards to select a number of pools of office to toggle HTML access to.

  To use it, just customize two variables constant to match your environment:

  $dn must maintain the name of the root of your ADAM database. I think that this name is the default, but I don't know about you.

  $domain must maintain the computer name or address IP and/or port number where the ADAM database is stored. You must also have sufficient permissions to connect if it is something else then "localhost".

  function Set-BCPoolHtmlAccess ([string]$Pool_id, [boolean]$HtmlAccess) {
  <#
      .SYNOPSIS
          enables or disables HTML Access to the given VMware View desktop pool
      .DESCRIPTION
          This function enable or disable HTML Access to a desktop pool, by modifying
          the "pae-ServerProtocolLevel" property of the associated object in the ADAM
          database via LDAP. This property is a multi-valued attribute contains a array
          of string, which designates
          by which protocol desktops can be accessed. It valid values are "PCOIP",
          "RDP" and "BLAST". Controlling the existance of the string "BLAST" determines
          if the pool is accessible through HTML Access. The parameter Pool_id determines
          which object is modified.
      .EXAMPLE
          Set-BCPoolHtmlAccess "W7ST620" $True
      .PARAMETER Pool_id
          the pool_id of the desktop pool of which to enable or disable HTML access. Wildcards are allowed!
      .PARAMETER HtmlAccess
          Boolean value to set the HTML Access to.
      .OUTPUT
          None
      .NOTES
          Written by Paul Wiegmans on 31-8-2014
          "pae-ServerProtocolLevel" is a multivalued attribute, which is a little difficult to
          write correctly to the object.
          http://www.selfadsi.org/write.htm
                  Google "powershell ldap multi value property"
          http://jdhitsolutions.com/blog/2011/12/updating-multi-valued-active-directory-properties-part-1/
  #>
      $dn = "DC=vdi,DC=vmware,DC=int"   # root OU of VMware View ADAM database (CUSTOMIZE ME)
      $domain = "LDAP://localhost:389/$dn"  # connect to the ADAM database (CUSTOMIZE ME) 
  
      $root = New-Object System.DirectoryServices.DirectoryEntry $domain
      $query = New-Object System.DirectoryServices.DirectorySearcher
      $query.searchroot = $root
      $query.filter = "(&(objectCategory=pae-DesktopApplication)(cn=$pool_id))"
      $pools = @($query.findall())
      $propname = "pae-ServerProtocolLevel"
  
      foreach ($pool in $pools) {    
  
          $poolobj = [ADSI]$pool.GetDirectoryEntry()
          $protocols = $poolobj.$propname
          $desiredprotocols = @()
          foreach ($protocol in $protocols) {
              if ($protocol -ne "BLAST") {
                  $desiredprotocols += $protocol  # save a list of all existing protocols
              }
          }  
  
          if ($HtmlAccess) {
              $desiredprotocols += "BLAST"
          }
          write-verbose ("Desktop pool " + $poolobj.name + " gets protocols: "+$desiredprotocols)
          $poolobj.$propname = $desiredprotocols
          #$poolobj.$propname = @("PCOIP","RDP","BLAST")  # to reset to normal values
          $poolobj.CommitChanges()
      }
  }
  
  $pool_id = "W7S*"                  # pool_id of pool to set protocols of
  Set-BCPoolHtmlAccess $pool_id $false
  Set-BCPoolHtmlAccess $pool_id $true
  

  Have fun

  Post edited by: Sikkepitje

• SSL certificates on the desktop HTML access

  I am configuring access HTML and try to correctly configure SSL certificates on the VDI desktops in a linked Clone pool.  Documentation, VMware wants us to install a unique certificate for each desktop computer that will be a pain and from what I see, is impossible.  Does anyone have an easy solution for this?  The main problem that I notice, is that the IP Office address is what actually shows in the URL.  How an appropriate certificate can be created with a DHCP address he will change all the time?  Any guidance will be appreciated.

  Connect via a connection or a security server the value "use secure gateway" for HTML.  Only cert is the entry door.

• VMware Horizon HTML Access timeout error

  Anyone else having similar problem trying to access your desktop computer through security from the outside Server?

  Year error has occurred: {"code": "ETIMEDOUT", "errno": "ETIMEDOUT', 'syscall': 'connect'}

  As shown on the blog?

  New Horizon of VMware View customers and access HTML now available! Blog of Computing VMware for the end user - VMware Articles

  I can connect correctly internally without going through the Security Server or if you use the Client from the view when you use the Security server.

  So it must be just a matter of open ports on the hardware firewall (Cisco ASA 5510) for me. But I tried to open the tcp 8443 port and 22433 on Cisco ASA, but still get the same error code.

  Firewall Windows Server security and the connection to the Server VMware View Blast are enabled and set to allowed on incoming ports.

  Anyone successfully deployed these access HTML behind the Cisco firewall?

  Do you mind sharing your configuration?

  TIA.

  Too bad.

  There was a typo in the Q & A blog.

  New Horizon of VMware View customers and access HTML now available! Blog of Computing VMware for the end user - VMware Articles

  You will need to open port tcp 22443 and not 22433.

  Should have read the PDF file instead.

  All is well now.

• Certificate of generic see 5.2 horizon for HTML access

  Hello, can you please advise if there is a way how to set up the same certificate wildcard for all components, including the view portal and access HTML?

  We use a * .moravia - it.com certificate for connection of load-balanced servers and the Security server. When I connect to the portal view https://vdissh.moravia-it.com, everything goes well - see below

  

  When I click on the desktop, I get redirected to https://vdissh-mnet-1.mnet.moravia - it.com, which is the first node of the NLB cluster and then I get the certificate below warning (generic does not work)

  

  When ignoring the warning I can connect with success on the desktop, but there's a certificate error will appear in the address bar - see below.

  

  Can I redirect to the cluster name and get rid of the certificate error?

  Thank you in advance for your help!

  Assuming that vdissh.moravia - it.com is the host name of your security server, just set your "URL external Blast" to "https://vdissh.moravia-it.com:8443".

  See the instructions here on how to do it:

  http://pubs.VMware.com/view-52/topic/com.VMware.view.installation.doc/GUID-ADF2F129-9B35-494A-A84B-5236A6BD162D.html

  -Chris

• Is there a way to access the HTML data as you can do with XML data?

  I am new to AS3 and I'm trying to figure out how to access HTML as you can with the XML data?

  HTML isn't XML, nor is the DOM supported as JavaScript does, so you'll have to go with the typical string operations. If it's on a website, you can use JavaScript to make the analysis of DOM for you in HTML via AJAX loading and working back and forth between JS<->As.

  Otherwise the Interior HAVE only, Regular Expressions are most useful for this. The HTML code in a viable XML structure analysis may be possible when it is not applying the same syntax rules it and is of a dynamic nature. For example, it is perfectly valid to put the content in a page that is not nested inside a tag, for example

  some paragraph

  Some text let only locked in the body. You need detect possible syntactic questions and manage all of them. Channel ops are much easier.

  Any specific markup? you have trouble to detect/work?