Horizon plugin 6 direct connection + HTML access
Hello
I just set up a display environment 6 horizon with a direct plugin successfully.
Now, I try to get the most out of this area and by this test to complete the html access.
I followed this guide:VMware KB: allowing HTML access with the plugin VMware Horizon view Agent Direct Connect 5.3 5.3 horizon that does not work.
Can someone guide me through the steps necessary to access html in horizon 6 with direct access plugin?
Kind regards
Herb
Setup to view 6 has a small difference with 5.x, you can try by following steps below:
1. install View Agent
2. install the plugin VADC
3 get web client package: VMware-Horizon-View-HTML-Access-x.y.z-000000.zip
4 install the IIS and configure the Web Client as steps d through KB
Tags: VMware
Similar Questions
-
Plugin horizon View Agent direct connection + disconnection after disconnection
If I use the plug-in Horizon View Agent Direct-connection is there still a way to get the virtual machine for auto & with force logoff the current user after X minutes if the (in my case), lightweight client disconnects abruptly (off)?
It is probably a virtual machine that is not handled by a server view connection? You should create/change the following registry setting power (this would be automatically updated if you were using a CS):
HKEY_LOCAL_MACHINE\SOFTWARE\VMware \VMware VDM\Node Manager\DisconnectLimitMinutes, Inc.
The value-1 means immediately, a value of 0 means never. Positive values are the number of minutes to wait after the disconnection occurs.
Mike
-
Direct connection to the view Agent Linux?
Is there an implementation linux plugin for direct connection from the view of the PicoIP client (I use VMware View on Mac) on a Linux desktop?
I just wanted to put in place a set of virtual machines Linux to be accessible by customers to view, Mac. Also intend to do not use a view connection server. I installed a virtual machine to test with Ubuntu top end and configure the Agent as well.
Direct connection is not supported. You must configure a login server in your environment.
-
VMware Horizon HTML Access timeout error
Anyone else having similar problem trying to access your desktop computer through security from the outside Server?
Year error has occurred: {"code": "ETIMEDOUT", "errno": "ETIMEDOUT', 'syscall': 'connect'}
As shown on the blog?
I can connect correctly internally without going through the Security Server or if you use the Client from the view when you use the Security server.
So it must be just a matter of open ports on the hardware firewall (Cisco ASA 5510) for me. But I tried to open the tcp 8443 port and 22433 on Cisco ASA, but still get the same error code.
Firewall Windows Server security and the connection to the Server VMware View Blast are enabled and set to allowed on incoming ports.
Anyone successfully deployed these access HTML behind the Cisco firewall?
Do you mind sharing your configuration?
TIA.
Too bad.
There was a typo in the Q & A blog.
You will need to open port tcp 22443 and not 22433.
Should have read the PDF file instead.
All is well now.
-
Connection by HTML access problems
Hi all
HTML access is smart enough, if it works, I installed the pack, the agent and configured connection servers. It worked immediately.
But using a long name of the server to connect is boring. So I decided to use a loadbalancer dns including 2 managed servers. Works great for the client to normal display mode. Web access is also possible.
But when I changed the external url of the secure gateway Blast and externally https secure url tunnel began to hung. I also changed the certificate to the new url on the two servers in connection
Log In is possible, choose a straight pool is also possible, but when I try to choose a pool and connect to my desktop my browser displays the message of the requested site cannont shows. Even if I try directly through my login server addresses.
Is it possible that, when I changed the URL and the certificate, the feature pack server connection is broken?
Hope you have an idea
Thanks in advance
Manual
Ok
I found the solution, quite simpleThe Blast Secure Gateway URL must be the same as the login server itself. Otherwise, it cannot be transmitted. The external URL of the SG https can be that of the loadbalancer.
Manual
-
VPN access to the not directly connected networks
Hello
I have a 5510 which is used for Client VPN access and there is something simple that I can't work.
The VPN part works very well with AAA on a CBS.
But what does not is access to networks that are not directly connected to the inside interface.
That is to say the VPN users can connect to the network within the Interface (say 192.168.0.0/24) but not a 10.0.0.0/8 network which is connected through 192.168.0.1 router.
I have the static routes in Routing and firewall all showing the way back to the firewall on all the other networks, but I don't get more far the 192.168.0.1 router...
I use split tunneling and pass all of the private over the VPN - internet networks is used through the own local access to clients.
Can someone help me out here?
Thank you.
Fraser
PS: have the same type of access on a 7206VXR and soft, everything can be consulted and which is necessary - but I would like to move this service to the ASA.
Fraser
I don't understand the ASDM parts as you suggest. The code would be great.
I would also recommend control ACL applied to the inside interface (if any) that it allows traffic as
inside_access_in list of permitted access 10.0.0.0 255.0.0.0 vpnsubnet vpnnetmask
If still no joy, attach your config sanitized, would be useful for me to diagnose.
Concerning
-
I set up the connection to the server with a link Direct is TICKING, I did that once the initial connection has been made for the broker and an assigned desktop computer, connect directly to the desktop and so not care about the State of the connection to the server. After restart or just restart the VMware View Server service all customers lost access until it is facing up.
Is it right, that we use View 3.1.
Thank you
It's strange that I can restart my server connection without worrying about all the users. How brokers connection you have and do you have activated all at direct connection?
If you have found this device or any other useful post please consider the use of buttons useful/correct to award points
-
Hi all
first of all, I am french, sorry for my bad English
I am installing a VMware View (6.0.1) solution, I deploy servers of the company I work (on Windows 2008 R2):
-on the same domain (horizon.local):
-Server connection-see: 172.16.15.1/24
-Server view composer: 172.16.15.3/24
-a Server Active Directory: 172.16.15.2/24 with a DHCP server
-free domain name:
-Security Server see: 172.16.15.14/24 and 194.3.x.x/24 (public IP address to external access). In this server, I installed an SSL certificate for the FULL domain name corresponds to public IP address.
Between 172.16.15.100/24 and 172.16.15.200/24 ip address AND virtual desktops (Windows 7 Pro, see agent installed and installed the html access).
So my problem: when I'm at home and try to connect to the Security Server (the FULL domain name is horizon.mycompany.net), everything is ok. I write my user and password, it's ok. The pool to allow it there but when I click on the pool, in the navigation bar on google Chrome, the FULL domain name has been replaced by the virtual IP address of office: 172.16.15.101, so when I'm at home I can not be connected (because of the private address).
Anyone know how I can keep public IP address all the time?
Thanks for all, if you want more information, just a wonder.
Tom
Are you able to connect to desktops using PCoIP and HTML access when it connects directly to the login server? If it is successful, the connection to the server is fine.
Regarding the security servers, there is a 1:1 relationship between security servers and connection. This means that if you have 2 security servers, you should have 2 servers connection. Since you have a connection to the server, I recommend the deletion of unused security server. This is possible by running the command: vdmadmin-s-r-s unknown of the connect to server command line.
The image that you attached previously called a security server - WIN-SECURITYSER modifier has WIN-SECURITYSER as server name. Security servers listed in administrator mode are WIN-QIP6105UM7 and Innoconnu. I believe that when you change the name of a security server, it will update in administrator mode, but not on the field a security server modifier. Since WIN-T2JSQ1T05IQ and WIN-QIP6105U0M7 seem to be names of default host and unknown is unknown (in English), I wonder if unknown was once WIN-SECURITYSER.
If delete unknown does not resolve the problem, it may be necessary to remove and reinstall the Security server on WIN-QIP6105U0M7 software reinstall to ensure that it pairs correctly with the connection to the server.
-
Hello
We managed to connect our Surface Pro 3 Windows 10 running on a mobile printers HP OfficeJet 200 series using a Wi - Fi Direct connection not wireless. The problem is that whenever we turn the printer off or go to sleep Surface pro cannot re esatablish of connection with the printer again after on. In the device and printers OfficeJet 200 is still there but greyed out and has a status to be offline even if the printer has been for a while.
The only way to connect it must make the entire process of reconnection to the Wi - Fi direct connection, for example by typing in the code and wait to see the device is connected. It should not this printer to establish a connection with the surface pro automatically after power on, yet the pro Surface shows that the printer is offline and I know that I had direct Wi - Fi together to establish the connection automatically. Is there a solution for this.
The problem only occurs when the printer stops and he must turn it off to save battery because what get out us them for field work.
We discovered that the Wi - Fi Direct is not fully supported in Windows 10. The only way you can reconnect to Wi - Fi direct is if you connect to the printer that you connect to an access point Wi - Fi. If you do this your Wi - Fi direct printer connection will be reset. The downside is that your Surface Pro 3 will lose the internet connection.
For us, that our solution is not to use Wi - Fi direct and use the Wi - Fi function. We connected the mobile series HP OfficeJet 200 to our iPhone hot spot and we also connected the Surface Pro iPhone hotspot. Whenever we connect our tablet to the hotspot, we can use the printer because the printer is always connected to the HotSpot.
-
Direct Connect with GPS or other active data
I'm testing the possibility of using the functionality of direct connection to and from a phone while accessing other critical mission for my work tasks. We require the use of a tracking application that captures and sends GPS coordinates to a server via a data connection and also to connect to work through tasks via a web browser application. Direct connection cannot be launched on the phone while the user has any running application that uses data, it seems. It will work when the tracking application is closed and that the browser is slow and not loading pages, but doesn't if the browser will load a new page, the GPS application is running or even just Google maps. Can you get it someone please let me know if the i1 should be able to use Direct Connect when using other services that use data? I have been informed by Sprint that it is possible (two other applications can run on the data at the same time). The phone lacks a voice, only data plan.
No, you can't. If something is using data on an iDEN connection, that's all. That's all it will do. It's just the nature of identity. If you want a phone that will have voice and data communications at the same time, you need to use CDMA or GSM.
-
Update Windows using the two direct connection to proxy nd
Use the two nd direct net connection by proxy, more time via proxy, is there a way I can configure update without changing the settings?
am on windows 7 Home premium
Please correct me if wrong, using "netsh winhttp import proxy IE" it says you can update via proxy, passing 'autamatically detected settings' proxy servers, will be here all the problems and errors in its conclusion/search for updates (does not search for updates error codeWindowsUpdate_80072EE2""WindowsUpdate_dt000")?
Asked me to do this update of proxy (windows security essentials)
The open command prompt window. [In Vista and Windows 7 you need to open the prompt as Administrator]
2. type of this syntax: NETSH WINHTTP PROXY DEFINED (Insert here the number and proxy server) and press ENTER.
Example: NETSH WINHTTP SET PROXY 1.1.1.1:8080
OR: NETSH WINHTTP SET MYPROXY .NET PROXY: 8080If his point is it normal that windows update as well as the WSE update fails with direct connection?
happened with me with error msg error codeWindowsUpdate_80072EE2""WindowsUpdate_dt000"
If the details of my proxy are 192.168.0.1 port 3128, which is the entrance to the command line...
I had to reset the connection parameters using winhttp reset to retrieve the update in direct connection to the network
Please give me a good solution with this
Help us help you: start by reading this post 'sticky '...
What information to post in the Windows Update forum
http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/1467f44b-ee27-4F7D-98d7-f1c4b35b3395=======================
You can encounter errors related to connect temporary [e.g. 0x80072EFF 0x80072EFE 0x80072EFD; 0x80072EEF; 0x80072ee20x80072EE7; 0xC80003FA 0X8024402F] when you use Windows Update or Microsoft Update to install updates
http://support.Microsoft.com/kb/836941How to reset the Windows Update components?
-Online skip the section to APPLY to if Win7; Access KB971058 via Internet Explorer (32-bit) only. Run the difficulty in DEFAULT and AGGRESSIVE modes, then restart [1]
http://support.Microsoft.com/kb/971058~~~~~~~~~~~~~~~~~~~~~~
[1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not list the updates installed in Add/Remove Programs (Windows XP) or updates installed (Vista & Win7).~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
LaserJet 2100 direct connect network assistance
Hello techies. I need help please.
I have a HP Laserjet 2100 printer with a Jetdirect 600n (J3110A) card I am using with my plug for laptop Compaq V2615US as a direct connection. It is without a server between the computer and the printer.
Has been fighting for more than a week. Time for me to reach and ask for help.
It is not recognized.
Print a page of Cofiguration Jetdirect info I get the following information:
LAN HW address: 001083F3A247
External Loopback 03 error is NOT READY i/o card
TCP/IP STATUS: 55 CURRENT BOOTP/DHCP
HOST NAME: NPIF3A247
IP address: 0.0.0.0
IPX/SPX STAUUS: impossible to 29 net number of senses
NAME OF THE NŒUD: NPIF3A247
I was able to CLEAR the error of closure by doing a loopback plug.
Using the network printer wizard I tried individually enter either the host name, IP address, LAN HW or name of the node above the address in the appropriate box. NONE of them worked.
Somewhere, I saw a reference to a supposed "default" IP address of the 192.0.0.192. Tried it as an IP address, nothing helps. Received a message on the screen indicating that it was a 'default' address and suggesting that it was not fair.
My computer's network card is a Realtek 8139/810 x Family card that is declared as working correctly by my computer and has already been used in the past in this way with a different printer.
Key questions are:
1 what I'm missing or doing wrong?
2 - is a dead Jetdirect card?
I can access a Jetdirect 620n card, but the application list I've seen doesn't have the list of the 2100 as a printer there.
It would be worth to try myself to a substitution of the 620n for my 600n card?
Thanks in advance for your help.
John
"LittleJohn1969" wrote in message News: * e-mail address is removed from the privacy * .com...Hello techies. I need help please.
I have a HP Laserjet 2100 printer with a Jetdirect 600n (J3110A) card I am using with my plug for laptop Compaq V2615US as a direct connection. It is without a server between the computer and the printer.
Has been fighting for more than a week. Time for me to reach and ask for help.
It is not recognized.
Print a page of Cofiguration Jetdirect info I get the following information:
LAN HW address: 001083F3A247
External Loopback 03 error is NOT READY i/o card
TCP/IP STATUS: 55 CURRENT BOOTP/DHCP
HOST NAME: NPIF3A247
IP address: 0.0.0.0
IPX/SPX STAUUS: impossible to 29 net number of senses
NAME OF THE NŒUD: NPIF3A247
I was able to CLEAR the error of closure by doing a loopback plug.
Using the network printer wizard I tried individually enter either the host name, IP address, LAN HW or name of the node above the address in the appropriate box. NONE of them worked.
Somewhere, I saw a reference to a supposed "default" IP address of the 192.0.0.192. Tried it as an IP address, nothing helps. Received a message on the screen indicating that it was a 'default' address and suggesting that it was not fair.
My computer's network card is a Realtek 8139/810 x Family card that is declared as working correctly by my computer and has already been used in the past in this way with a different printer.
Key questions are:
1 what I'm missing or doing wrong?
2 - is a dead Jetdirect card?
I can access a Jetdirect 620n card, but the application list I've seen doesn't have the list of the 2100 as a printer there.
It would be worth to try myself to a substitution of the 620n for my 600n card?
Thanks in advance for your help.
John
Without any kind of switch between the printer and the computer, you absolutely have a cable modem Simulator for your connection "ethernet". You will NOT be able to use a standard ethernet cable.Once you find this crossover cable and that you ran a test on the printer print to the default IP address (read the printer or jet direct instructions on the card to print or otherwise find the Jetdirect card settings) then you can create a new "printer port" using the IP address of the card direct jet to join the two. 192.0.0.192 isn't usually an IP address by any device (I've never seen anywhere.) It would more likely be something like 192.168.1.xxx.Also, you should be able to buy a switch 4 ports and do the same thing with standard ethernet cables. Plug the computer and jet direct card printer on the switch. -
FCoE directly connect to VNX5300 with no switch zoning
I was wondering if anyone has any experience with this unit or a similar facility. I find no decent documentation to help us decide if it is a legitimate set upward for a production of about 16 servers 3 chassis environment. Our expert Cisco has ever put up a UCS environment with a direct connection to the San via FCoE and intuitively is against it, as we do not expect to use a switch to zoning. Is there a real risk in the present? It will support in the future?
Hi Henry,.
If you look at the following document:
http://www.Cisco.com/en/us/docs/switches/Datacenter/MDS9000/interoperability/matrix/Matrix8.html
See point number 3, the direct model to support tethering still requires a SDM or N5k upstream to provide this information.
. / Afonso
-
to reach a server on a VLAN that is not directly connected to the inside interface
scénarion
PIX 515
6506 core with VLAN A, B, c. (intervlan routing is ok)
vlanC is directly connected to the inside interface of the fw
question
How a crowd outside could reach a server ServerA on vlanA.
Hello
Concerning Point 1, Yes if the roads required for networks connected inside the network is done on pix.
Concerning Point 2, if the IP address that you use within the network is routable (public IP), the command you gave will work. The command indicates that when 10.10.1.10 inside the network host wants to go outside the network, use the same IP address. Because NAT does not occur, the actual address of the server presents itself as the visible address and the address of the host. So if the IP address you specify is not a public IP address, outside world can't access.
-
Client remote access VPN gets connected without access to the local network
: Saved
:
ASA 1.0000 Version 2
!
hostname COL-ASA-01
domain dr.test.net
turn on i/RAo1iZPOnp/BK7 encrypted password
i/RAo1iZPOnp/BK7 encrypted passwd
names of
!
interface GigabitEthernet0/0
nameif outside
security-level 0
IP 172.32.0.11 255.255.255.0
!
interface GigabitEthernet0/1
nameif inside
security-level 100
IP 192.9.200.126 255.255.255.0
!
interface GigabitEthernet0/2
Shutdown
No nameif
no level of security
no ip address
!
interface GigabitEthernet0/3
Shutdown
No nameif
no level of security
no ip address
!
interface GigabitEthernet0/4
Shutdown
No nameif
no level of security
no ip address
!
interface GigabitEthernet0/5
nameif failover
security-level 0
192.168.168.1 IP address 255.255.255.0 watch 192.168.168.2
!
interface Management0/0
nameif management
security-level 0
192.168.2.11 IP address 255.255.255.0
!
passive FTP mode
DNS server-group DefaultDNS
domain dr.test.net
network of the RAVPN object
192.168.0.0 subnet 255.255.255.0
network of the NETWORK_OBJ_192.168.200.0_24 object
192.168.200.0 subnet 255.255.255.0
network of the NETWORK_OBJ_192.9.200.0_24 object
192.9.200.0 subnet 255.255.255.0
the inside_network object-group network
object-network 192.9.200.0 255.255.255.0
external network object-group
host of the object-Network 172.32.0.25
Standard access list RAVPN_splitTunnelAcl allow 192.9.200.0 255.255.255.0
access-list extended test123 permit ip host 192.168.200.1 192.9.200.190
access-list extended test123 permit ip host 192.9.200.190 192.168.200.1
access-list extended test123 allowed ip object NETWORK_OBJ_192.168.200.0_24 192.9.200.0 255.255.255.0
192.9.200.0 IP Access-list extended test123 255.255.255.0 allow object NETWORK_OBJ_192.9.200.0_24
pager lines 24
management of MTU 1500
Outside 1500 MTU
Within 1500 MTU
failover of MTU 1500
local pool RAVPN 192.168.200.1 - 192.168.200.254 255.255.255.0 IP mask
no failover
ICMP unreachable rate-limit 1 burst-size 1
ASDM image disk0: / asdm - 66114.bin
don't allow no asdm history
ARP timeout 14400
NAT (inside, outside) source Dynamics one interface
NAT (it is, inside) static static source NETWORK_OBJ_192.9.200.0_24 destination NETWORK_OBJ_192.168.200.0_24 NETWORK_OBJ_192.168.200.0_24 NETWORK_OBJ_192.9.200.0_24
Route outside 0.0.0.0 0.0.0.0 172.32.0.2 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
Floating conn timeout 0:00:00
dynamic-access-policy-registration DfltAccessPolicy
identity of the user by default-domain LOCAL
the ssh LOCAL console AAA authentication
Enable http server
http 0.0.0.0 0.0.0.0 outdoors
http 0.0.0.0 0.0.0.0 inside
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown warmstart of cold start
Crypto ipsec transform-set ikev1 ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac
Crypto ipsec transform-set ikev1 esp ESP-DES-MD5-esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-esp - aes esp-md5-hmac
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 define ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
outside_map interface card crypto outside
Crypto ca trustpoint ASDM_TrustPoint0
Terminal registration
name of the object CN = KWI-COL-ASA - 01.dr.test .net, C = US, O = KWI
Configure CRL
Crypto ikev1 allow outside
IKEv1 crypto policy 10
authentication crack
aes-256 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 20
authentication rsa - sig
aes-256 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 30
preshared authentication
aes-256 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 40
authentication crack
aes-192 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 50
authentication rsa - sig
aes-192 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 60
preshared authentication
aes-192 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 70
authentication crack
aes encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 80
authentication rsa - sig
aes encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 90
preshared authentication
aes encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 100
authentication crack
3des encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 110
authentication rsa - sig
3des encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 120
preshared authentication
3des encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 130
authentication crack
the Encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 140
authentication rsa - sig
the Encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 150
preshared authentication
the Encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 65535
preshared authentication
3des encryption
sha hash
Group 2
life 86400
Telnet 192.9.200.0 255.255.255.0 inside
Telnet timeout 30
SSH 0.0.0.0 0.0.0.0 management
SSH 0.0.0.0 0.0.0.0 outdoors
SSH 66.35.45.128 255.255.255.192 outside
SSH 0.0.0.0 0.0.0.0 inside
SSH timeout 30
SSH version 2
Console timeout 0
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
WebVPN
allow outside
AnyConnect image disk0:/anyconnect-win-2.5.2014-k9.pkg 1
AnyConnect enable
tunnel-group-list activate
attributes of Group Policy DfltGrpPolicy
internal RAVPN group policy
RAVPN group policy attributes
value of server WINS 192.9.200.164
value of 66.35.46.84 DNS server 66.35.47.12
VPN-filter value test123
Ikev1 VPN-tunnel-Protocol
Split-tunnel-policy tunnelspecified
Split-tunnel-network-list value test123
Dr.kligerweiss.NET value by default-field
username test encrypted password xxxxxxx
username admin password encrypted aaaaaaaaaaaa privilege 15
vpntest Delahaye of encrypted password username
type tunnel-group RAVPN remote access
attributes global-tunnel-group RAVPN
address RAVPN pool
Group Policy - by default-RAVPN
IPSec-attributes tunnel-group RAVPN
IKEv1 pre-shared-key *.
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
Review the ip options
inspect the netbios
inspect the rsh
inspect the rtsp
inspect the skinny
inspect esmtp
inspect sqlnet
inspect sunrpc
inspect the tftp
inspect the sip
inspect xdmcp
!
global service-policy global_policy
context of prompt hostname
no remote anonymous reporting call
call-home
Profile of CiscoTAC-1
no active account
http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address
email address of destination [email protected] / * /
destination-mode http transport
Subscribe to alert-group diagnosis
Subscribe to alert-group environment
Subscribe to alert-group monthly periodic inventory 2
Subscribe to alert-group configuration periodic monthly 2
daily periodic subscribe to alert-group telemetry
aes encryption password
Cryptochecksum:b001e526a239af2c73fa56f3ca7667ea
: end
COL-ASA-01 #.
Here is a shot made inside interface which can help as well, I've tried pointing the front door inside the interface on the target device, but I think it was a switch without ip route available on this subject I think which is always send package back to Cisco within the interface
Test of Cape COLLAR-ASA-01 # sho | in 192.168.200
25: 23:45:55.570618 192.168.200.1 > 192.9.200.190: icmp: echo request
29: 23:45:56.582794 192.168.200.1.137 > 192.9.200.164.137: udp 68
38: 23:45:58.081050 192.168.200.1.137 > 192.9.200.164.137: udp 68
56: 23:45:59.583176 192.168.200.1.137 > 192.9.200.164.137: udp 68
69: 23:46:00.573517 192.168.200.1 > 192.9.200.190: icmp: echo request
98: 23:46:05.578110 192.168.200.1 > 192.9.200.190: icmp: echo request
99: 23:46:05.590057 192.168.200.1.137 > 192.9.200.164.137: udp 68
108: 23:46:07.092310 192.168.200.1.137 > 192.9.200.164.137: udp 68
115: 23:46:08.592468 192.168.200.1.137 > 192.9.200.164.137: udp 68
116: 23:46:10.580795 192.168.200.1 > 192.9.200.190: icmp: echo request
COL-ASA-01 #.
Any help or pointers greatly appreciated, I have do this config after a long interval on Cisco of the last time I was working it was all PIX so just need to expert eyes to let me know if I'm missing something.
And yes I don't have a domestic network host to test against, all I have is a switch that cannot route and bridge default ip helps too...
Hello
The first thing you should do to avoid problems is to change the pool VPN to something else than the current LAN they are not really directly connected in the same network segment.
You can try the following changes
attributes global-tunnel-group RAVPN
No address RAVPN pool
no mask RAVPN 192.168.200.1 - 192.168.200.254 255.255.255.0 ip local pool
local pool RAVPN 192.168.201.1 - 192.168.201.254 255.255.255.0 IP mask
attributes global-tunnel-group RAVPN
address RAVPN pool
no nat (it is, inside) static source NETWORK_OBJ_192.168.200.0_24 NETWORK_OBJ_192.168.200.0_24 static destination NETWORK_OBJ_192.9.200.0_24 NETWORK_OBJ_192.9.200.0_24
In the above you first delete the VPN "tunnel-group" Pool and then delete and re-create the VPN pool with another network and then insert the same "tunnel-group". NEX will remove the current configuration of the NAT.
the object of the LAN network
192.168.200.0 subnet 255.255.255.0
network of the VPN-POOL object
192.168.201.0 subnet 255.255.255.0
NAT (inside, outside) 1 static source LAN LAN to static destination VPN-VPN-POOL
NAT configurations above adds the correct NAT0 configuration for the VPN Pool has changed. It also inserts the NAT rule to the Summit before the dynamic PAT rule you currently have. He is also one of the problems with the configurations that it replaces your current NAT configurations.
You have your dynamic PAT rule at the top of your NAT rules currently that is not a good idea. If you want to change to something else will not replace other NAT configurations in the future, you can make the following change.
No source (indoor, outdoor) nat Dynamics one interface
NAT source auto after (indoor, outdoor) dynamic one interface
NOTICE! PAT dynamic configuration change above temporarily interrupt all connections for users on the local network as you reconfigure the dynamic State PAT. So if you make this change, make sure you that its ok to still cause little reduced in the current internal users connections
Hope this helps
Let me know if it works for you
-Jouni
Maybe you are looking for
-
I can't compose an email in my yahoo mail and yahoo mail works real slow
I started having a problem with my yahoo e-mail recently, he started to work slower than usual, then he stopped allowing me to dial any mail. I'm still able to receive and read my mail, but very slowly it works nothing like he did. I updated my Windo
-
How to activate the webcam on the Satellite C660-C660D?
I can't get my webcam integrated for work on the Satellite C660D/C660. Should I turn on or download a driver? Help
-
method of machine utiliboard connection not available
I have the latest educational version of Ultiboard (11.0.2) and the method of connection Machine to place lines is not anywhere to be found-no icon, nothing, not even greyed out. I'm on the copper layer. This feature has been removed?
-
Cannot install Microsoft Office Home and Student 2007
My father has purchased Microsoft Office Home and Student 2007 in Hong Kong in March 2009 and installed in his laptop. When he returned to the United States in June, I installed the same package to the office of my brother and my laptop. Well, the pr
-
QR code shows not all account information
HelloI'm trying to generate QR codes for our buisness in Indesign CC cards, latest updates installed. I can genereate code without any problem, but if I scan the code with my laptop, I see only the name and phone number. There is no E-mail, no Web pa