VMware Horizon HTML Access timeout error

Similar Questions

• Horizon plugin 6 direct connection + HTML access

  Hello

  I just set up a display environment 6 horizon with a direct plugin successfully.

  Now, I try to get the most out of this area and by this test to complete the html access.

  I followed this guide:VMware KB: allowing HTML access with the plugin VMware Horizon view Agent Direct Connect 5.3 5.3 horizon that does not work.

  Can someone guide me through the steps necessary to access html in horizon 6 with direct access plugin?

  Kind regards

  Herb

  Setup to view 6 has a small difference with 5.x, you can try by following steps below:

  1. install View Agent

  2. install the plugin VADC

  3 get web client package: VMware-Horizon-View-HTML-Access-x.y.z-000000.zip

  4 install the IIS and configure the Web Client as steps d through KB

• Problem with HTML access

  Hi all

  first of all, I am french, sorry for my bad English

  I am installing a VMware View (6.0.1) solution, I deploy servers of the company I work (on Windows 2008 R2):

  -on the same domain (horizon.local):

  -Server connection-see: 172.16.15.1/24

  -Server view composer: 172.16.15.3/24

  -a Server Active Directory: 172.16.15.2/24 with a DHCP server

  -free domain name:

  -Security Server see: 172.16.15.14/24 and 194.3.x.x/24 (public IP address to external access). In this server, I installed an SSL certificate for the FULL domain name corresponds to public IP address.

  Between 172.16.15.100/24 and 172.16.15.200/24 ip address AND virtual desktops (Windows 7 Pro, see agent installed and installed the html access).

  So my problem: when I'm at home and try to connect to the Security Server (the FULL domain name is horizon.mycompany.net), everything is ok. I write my user and password, it's ok. The pool to allow it there but when I click on the pool, in the navigation bar on google Chrome, the FULL domain name has been replaced by the virtual IP address of office: 172.16.15.101, so when I'm at home I can not be connected (because of the private address).

  Anyone know how I can keep public IP address all the time?

  Thanks for all, if you want more information, just a wonder.

  Tom

  Are you able to connect to desktops using PCoIP and HTML access when it connects directly to the login server?  If it is successful, the connection to the server is fine.

  Regarding the security servers, there is a 1:1 relationship between security servers and connection.  This means that if you have 2 security servers, you should have 2 servers connection.  Since you have a connection to the server, I recommend the deletion of unused security server.  This is possible by running the command: vdmadmin-s-r-s unknown of the connect to server command line.

  The image that you attached previously called a security server - WIN-SECURITYSER modifier has WIN-SECURITYSER as server name.  Security servers listed in administrator mode are WIN-QIP6105UM7 and Innoconnu.  I believe that when you change the name of a security server, it will update in administrator mode, but not on the field a security server modifier.  Since WIN-T2JSQ1T05IQ and WIN-QIP6105U0M7 seem to be names of default host and unknown is unknown (in English), I wonder if unknown was once WIN-SECURITYSER.

  If delete unknown does not resolve the problem, it may be necessary to remove and reinstall the Security server on WIN-QIP6105U0M7 software reinstall to ensure that it pairs correctly with the connection to the server.

• See 5.2 - blasting HTML XP - An error has occurred: {'code': "ECONNRESET"}

  Hello

  I've seen 5.2 installed and works fine, but I cannot access my XP related clones using the HTML access

  The error I get - year error has occurred: {'code': "ECONNRESET"}

  My stock Win 7 works very well with HTML access.

  There are a few references on the web saying that this is a bug in the current version.

  Any who see this before or you know any fix.

  Thank you, Joe

  Got, it works by removing this key "reg" from the VM parent and linked clones

  HKLM/Software/VMware Inc./Blast/Config/SSLHash

  See attached job!

  

• VISA READ timeout error - several GPIB resources

  Hello

  I'm working on a network 3 GPIB instruments (Optical Attenuator, amplifier in fiber, spectrum analyser), controlled using VISA sessions in Labview. When it is run separately, the three corresponding screws (which are located in three different Labview projects) works as expected. However, when they ran at the same time, one gives them timeout-1073807339 VISA READ errors. These errors seem to occur when another instrument is sending / receiving data / instructions at the same time that she is.

  The exact context of the error is either:

  -an another VI is running, which includes sending several requests and responses every 100 ms, reading

  -by failing VI starts, I get an error of waiting time among the first Subvi containing a VISA READ operation to perform (sometimes initialize.vi (in situation 1), sometimes one of the subVIs connected the rest State (State 0) on the time-out of the structure of the event).

  or:

  -the default VI is running,

  -by starting another VI, which includes repeatedly sending requests and reading the responses, the failing VI up a mistake among the first Subvi containing a VISA READ operation to run (one of the subVIs linked the State of rest (0) on the time-out of the structure of the event).

  What I tried:

  -gradually increasing the delay between the VISA WRITE and READ operations to the relevant instrument (from 10 ms to 10 s), without success. More surprising are my observations which, by operating this single VI, increasing WRITE it / READ delay results in the same timeout errors. I have found no mention of such behavior through research google and forum. I hope that this may point to a solution to the main issue,

  -switching between synchronous and asynchronous VISA WRITE / READ operations.

  -reorganization of the network GPIB to a star to a linear topology topology (three instruments have different GPIB addresses in case anyone is wondering).

  My thoughts:

  It seems to me that the error is related to a delay introduced between a VISA request and its read operation by the transmission of another query associated another instrument in the same network GPIB. But I have no idea why pass a query to another instrument would introduce such a delay, or why this delay would result in a timeout error (and only an instrument, while writing / reading in each pilot screws are basically the same). Hopefully a more experienced Labview-er will be able to shed some light on my problem.

  Included is the project that contains the default VI (main.vi) and the driver custom made use of.

  There are a number of ways. If you want to keep separate projects for instruments, you can use semaphores often slandered around calls for screws in each project. Locking is not expected or predictable, but it would give controlled access to the GPIB resource.

• 10 Easy Install Windows crashes with "VMware Fusion has encountered an error."

  When I tried to install Windows 10 Pro on VMware Fusion 8, easy installation process works normally for awhile then crashes with "VMware Fusion has encountered an error."

  I submitted a request for assistance, but other users have it met with the easy installation process?

  (Support information are attached.)

  -Douglas

  Hi Douglas,.

  It looks like a problem with your graphics driver or the graphics card:

  VMware.log said it was the SVGA thread that crashed:

  2015-09 - T 02, 07: 16:47 - 06:00 [+ 10.606] | SVGA | W115: Caught Signal 6 - tid 38927 (addr 7FFF914E9286)

  /var/log/system.log reveals that the pilot needed to restart the GPU seconds more host later:

  2 sep 07:16:56 Douglass-Mac-Pro kernel [0]: NVDA: GPU error detected!

  2 sep 07:16:56 Douglass-Mac-Pro kernel [0]: NVDA: call gpusKillClient for task 0xffffff80727586d0

  2 sep 07:16:56 Douglass-Mac-Pro kernel [0]: NVDA (OpenGL): channel timeout!

  2 sep 07:16:56 Douglass-Mac-Pro kernel [0]: NVDA: Info channel: [0, 47 x 31, 0 x 14, 0x1ca5ef]

  2 sep 07:16:56 Douglass-Mac-Pro kernel [0]: NVDA: Version Info: [com.nvidia.web.GeForceWeb, v10.0.5 0x5e5f4c655b, 19862786, 346.02.03f01, 1]

  Many other people are also experiencing problems with Fusion 8 graphics cards and spare parts and/or the driver Nvidia on the web here: conflicts of Fusion 8.0 with Nvidia driver of web for Mac

  Workarounds for this thread: try disabling acceleration 3D for the virtual machine.  Try to uninstall the driver Nvidia of the web and win back the builtin driver OS X.  If you use a spare graphics card, try reinstalling the original.

  See you soon,.

  --

  Darius

• VMware Horizon 3.3.0 - slow when it is launched from a machine virtual (WS2008 R2) - all solutions?

  Hi guys,.

  We have an installer of VMware Horizon which works fine when accessed from our laptops.

  However, for several reasons, we also this environment accessible from a Windows Server 2008 R2 computer that resides in a virtual machine on a hypervisor.

  But the problem is that it is very very slow at the launch like this (you can feel the delay in cursor of mouse or when you open a window on the machine of Vmware View published). I want to clarify that the connection to the client VM (WS2008R2) is made through RDP.

  The questions that I have since I'm not able to find out so far are:

  (1) is x 86-64 catches WS2008R2 supported as a client? A Client of Horizon install VMware on it different in any way on a Windows 7 computer?

  (2) is the fact that he is virtualized to the cause of the slowness? If so, why is that and can do something about it?

  Thank you very much, I really appreciate your help.

  Jay.

  OK, he solved it myself

  It seems to the "Control Panel > mouse Options > pointers > scheme ' the 'Windows - Aero system' has been selected. The second I put it to zero, the cursor of the mouse began to behave and he moves normally.

  Jay.

• How to enable HTML access in the office pool by using PowerShell script?

  Hello

  I use to create pools of auto related clones using a script PowerShell/PowerCLI Office. The script provides all the parameters required for the Add-AutomaticLinkedClonePool cmdlet and there is a lot of it! Creating pools in this way allows me to save about 100 clicks per pool.

  Now I want to enable access HTML for each pool, but I can't seem to find the name of the parameter.

  I checked the properties of the object returned by Get-pool-pool_id w7mw620 and compared to other similar properties office pool where access HTML has been disabled. I coulnd't not see any differences in the property values, which seem to make a significant difference for the setting "enable access HTML '.

  There was a property named "calculatedValues", which was true for one and False for the other office pool. I don't know what is the meaning of this property. Help the cmdlet Add-AutomaticLinkedClonePool or AutomaticLinkedClone-set to list this property.

  So... How can I set the property to allow access HTML from a PowerCLI script?

  Hello, in response to my own question again...

  On the basis of the above VBScript example, I invented this PowerShell code snippet that does the work of activation / deactivation of HTML access to one or more funds pools, by adding or removing 'BLAST' to the allowed protocols. It's a beast of a code, and I think that this code can still be optimized/shortcut. It works for me. It allows the use of wildcards to select a number of pools of office to toggle HTML access to.

  To use it, just customize two variables constant to match your environment:

  $dn must maintain the name of the root of your ADAM database. I think that this name is the default, but I don't know about you.

  $domain must maintain the computer name or address IP and/or port number where the ADAM database is stored. You must also have sufficient permissions to connect if it is something else then "localhost".

  function Set-BCPoolHtmlAccess ([string]$Pool_id, [boolean]$HtmlAccess) {
  <#
      .SYNOPSIS
          enables or disables HTML Access to the given VMware View desktop pool
      .DESCRIPTION
          This function enable or disable HTML Access to a desktop pool, by modifying
          the "pae-ServerProtocolLevel" property of the associated object in the ADAM
          database via LDAP. This property is a multi-valued attribute contains a array
          of string, which designates
          by which protocol desktops can be accessed. It valid values are "PCOIP",
          "RDP" and "BLAST". Controlling the existance of the string "BLAST" determines
          if the pool is accessible through HTML Access. The parameter Pool_id determines
          which object is modified.
      .EXAMPLE
          Set-BCPoolHtmlAccess "W7ST620" $True
      .PARAMETER Pool_id
          the pool_id of the desktop pool of which to enable or disable HTML access. Wildcards are allowed!
      .PARAMETER HtmlAccess
          Boolean value to set the HTML Access to.
      .OUTPUT
          None
      .NOTES
          Written by Paul Wiegmans on 31-8-2014
          "pae-ServerProtocolLevel" is a multivalued attribute, which is a little difficult to
          write correctly to the object.
          http://www.selfadsi.org/write.htm
                  Google "powershell ldap multi value property"
          http://jdhitsolutions.com/blog/2011/12/updating-multi-valued-active-directory-properties-part-1/
  #>
      $dn = "DC=vdi,DC=vmware,DC=int"   # root OU of VMware View ADAM database (CUSTOMIZE ME)
      $domain = "LDAP://localhost:389/$dn"  # connect to the ADAM database (CUSTOMIZE ME) 
  
      $root = New-Object System.DirectoryServices.DirectoryEntry $domain
      $query = New-Object System.DirectoryServices.DirectorySearcher
      $query.searchroot = $root
      $query.filter = "(&(objectCategory=pae-DesktopApplication)(cn=$pool_id))"
      $pools = @($query.findall())
      $propname = "pae-ServerProtocolLevel"
  
      foreach ($pool in $pools) {    
  
          $poolobj = [ADSI]$pool.GetDirectoryEntry()
          $protocols = $poolobj.$propname
          $desiredprotocols = @()
          foreach ($protocol in $protocols) {
              if ($protocol -ne "BLAST") {
                  $desiredprotocols += $protocol  # save a list of all existing protocols
              }
          }  
  
          if ($HtmlAccess) {
              $desiredprotocols += "BLAST"
          }
          write-verbose ("Desktop pool " + $poolobj.name + " gets protocols: "+$desiredprotocols)
          $poolobj.$propname = $desiredprotocols
          #$poolobj.$propname = @("PCOIP","RDP","BLAST")  # to reset to normal values
          $poolobj.CommitChanges()
      }
  }
  
  $pool_id = "W7S*"                  # pool_id of pool to set protocols of
  Set-BCPoolHtmlAccess $pool_id $false
  Set-BCPoolHtmlAccess $pool_id $true
  

  Have fun

  Post edited by: Sikkepitje

• Vise to install 1008:9,-5000 access denied error installation Vocalizer for Logic 9

  I get the error:

  1008:9,-5000 access denied error

  As I am installing of Sonivox Vocalizer. It is a plugin for Logic 9.

  I traced down on the threads here that it's a common problem with the vise Installer application that many use to install their software, so they do not install for the same reason. Apparently the cause of changes in security in mac OS.

  How manually set privileges TEMPORARILY so that I can get this software to be installed from the installation disc?

  P.S. I already do not clean install (only admin), updated, then disk utility used to repair permissions and that it was not fixed.

  The system version: OS X 10.9.5 (13F1712)

  Kernel version: Darwin 13.4.0

  Model name: MacBook Pro

  Model identifier: MacBookPro11, 3

  Processor name: Intel Core i7

  Processor speed: 2.8 GHz

  Number of processors: 1

  Total number of Cores: 4

  (By heart) L2 Cache: 256 KB

  L3 Cache: 6 MB

  Memory: 16 GB

  Only suggestion I've seen who could work is to understand what files they are manually and selectively instal time machine. Don't know what files choose so what makes a very hit or miss solution and I would rather understand how to change the permissions.

  Emailed to Sonivox support more than a week: no answer, so I post here.

  Model name: MacBook P

  L3 Cache: 6 MB

  Memory: 16 GB

  Reset user - file property See post by Linc Davis

  You may need to restore the permissions on your user account. To do this, start on your recovery partition (hold down the command and R during startup) and open Terminal from the Utilities menu. In the Terminal, type: 'resetpassword' (without the), press return, and then select the admin user. You do not have to reset your password. Click the icon of your Mac hard drive at the top. In the list box below, select the user account that has problems. At the bottom of the window, you will see a box labeled restore Home Directory permissions and ACLs. Click the button to reset there. The process takes a few minutes. When you're finished, restart.

  Fix the permissions of the user

• Client VMWare Horizon on El Capitan

  MacBook Pro 15 ", mid-2015, retina 2.2 GHz Intel Core i7, 16 GB RAM, 256 GB SSD

  OS X Version of El Capitan 10.11.2

  I use the Client VMWare Horizon (version 3.5.2) to connect to business desktops VDI.  I have a number of questions.

  -VDI desktop consumes all connected screens, either 1, 2 or 3 screens.  I find no way to assign the VDI Office to a single workspace or monitor.  I use the Macbook screen, a connected HDMI monitor and a connected via a bolt of lightning to the DVI adapter.

  -The customer seems to disconnect when the Macbook goes to sleep.  But it is not always log out properly.  More than once I have been unable to restart the desktop computer without the intervention of my sys admin

  Finally, and this isn't a VDI issue per se, when I connect my Macbook to the company via Ethernet or wireless network, I'm just flat impossible to print only printers on the network of the company.  The Mac is not joined to the domain, is unable to see all printers, and I roll the printer add by hand.  I am able to define a printer by IP address or FULL domain name, but all attempts always results in the printer print code Postscript and not the print job.  This is the enterprise-class printers Ricoh.

  Any help would be appreciated in any of these questions.  Thank you.

  I found the New Horizon customers are less than optimal.  I returned back all the way to the customer display, as a preference, because it seems to stay connected more, better and with less issues, plus the customer of the Horizon. Currently using the client to view v1.6... Fortunately.

  Printers - I put all my users up on top of the basic intellectual property. Very few questions.  Users/Macs are members of a domain and are associated with the hard cable, but do not use the MS Print servers. In one or two cases, I used Hello for some high-end HP or printers Ricoh.

• Access denied ERROR

  I connect to my ReadyCLOUD (iPhone) app and I see my connected NAS.

  I click on it and see my home folder. When I select to view subfolders, I get an access denied error message.

  The only thing I've done is to restart the NAS Server

• VISA read timeout error - Keithley 2400

  I am using LabView 2010 to control a Keithley 2400 Sourcemeter on an RS-232 Interface. I want to set up a measure and take a reading (e.g. ground voltage / time)

  I took an example of "Keithley ReadOnly" library code, but the 1073807346 error to retrieve box "initialize". Then I looked in 'Initialize. VI"and found there is a VISA (timeout error?) reading error. I have attached two screenshots that shows errors. Can someone tell me how to solve the problem? Moreover, I am very new to labview, if someone could suggest a solution that is not too 'Advanced '? Thank you very much.

  
  

• Get an Access Violation error when playing games

  OP: Access Violation errors!

  I have download games on a game site that I trust and don't usually have problems. In the last 4 months, some of the new games that I downloaded and tried to play, give me the Access Violation error when I try to open the game to play the demo. Now just recently I noticed that several of my games that I bought and played for months, give me also Access Violation errors. I worked on it for months with people in customer service (on the site of games) and have not solved. The strange thing is, I can play some of these games on different websites without any problems or Violations of access at all. Yet the customer service people keep trying to 'fix' my computer, as if it were from my computer something to make this happen. At this point, I'm so frustrated that I had to try to get you all to see if anyone has experience this problem before and/or solved this kind of case before. I tried to turn off my Norton before download and play without success. I've updated everything that could be updated in regards to drivers, and such go.
  My system is Vista 32 bit, IE8, Norton Security and anti-virus.  Thanks for any help!

  Hello saund477,

  My research, I find that it is a known problem with Big fish games. I also see that some users were able to solve this problem and play games by disabling the antivirus program on their computer.

  I suggest that you turn off the Anti Virus program and check if you are able to play the game.

  Note: Please make sure that you enable the antivirus software after the test to keep your computer protected.

  You can refer to the thread below that I found that the forum of Big fish:

  http://forums.bigfishgames.com/posts/list/4106.page

  I also suggest that you post your question to the Bigfish forum for a better answer to this question, because the problem is only with Bigfish games:

  http://forums.bigfishgames.com/games/list.page

  About the error when you try to run the command, it seems that you type the command correctly, make sure that you type the command correctly.

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

• Just as a reference: how to FIX the annoying 'White Screen Of Death"with Silverlight and"Access denied"error with computer management.

  Well, I just hope that someone who has met these two mistakes will find my dose. It might save a lot of pointless research on the net.

  SYMPTOMS:
  -When you try to open a Silverlight application in your browser (Firefox, Chrome, IE, etc), your browser displays only a white area. When you right click on the white area, you can click on the Silverlight properties.
  -If you try to start "Computer management" by clicking on the 'My Computer' icon and select 'Manage', you get the following error: 'access denied '.

  CAUSE:
  The following errors are usually the result of a bad environment variable. In this case the "windir" environment variable does not work correctly. You can try running the management of the computer to start > run and entering:
  %windir%\system32\mmc.exe/s %windir%\system32\compmgmt.msc

  Notice the between the characters of percentage windir environment variable. If you run the above code, you will probably get an error saying that MMC cannot open the file. Look closely at the path, it's back!
  You will probably find any % somewhere.

  What actually happened here is the variable windir made reference to another variable: systemroot
  Why this creates problems, I'm not sure. Also, I don't understand what made then variable windir change.

  SOLUTION:
  -From your desktop or Explorer: right-click on "My computer" and select "Properties".
  -Click on the "Advanced" tab and then click "Environment Variables".

  http://pcauthorities.com/images/advanced-system-properties-XP.jpg

  -Did the windir variable. Together to "C:\Windows" do not think that it is already set to "C:\Windows", because windows then tells you. Double-click it to know for sure.

  http://www.adminxp.com/windowsvista/envvariabl.PNG

  -See, I told you! Change this to "C:\Windows".

  http://www.adminxp.com/windowsvista/editenvvar.PNG

  Hi Jooch,
   
  Thanks for posting such a detailed response, including symptoms, Cause, and resolution to "White Screen Of Death" with Silverlight and "Access denied" error with computer management"issues.
   
  I appreciate your time and effort to do the same. This could help other users of the forum as well.

• Impossible to update of Windows Media Player and Microsoft Security Essentials and the error is "access denied error 80070005."

  Apparently an involuntary change of administrative privileges or permissions (Windows XP Pro, SP3) keeps me updated Media Player version 9 to 11 v. and updated virus Security Essentials definitions.
  For Media Player, wmsetup.log reports access denied error 80070005 and UpdSpAPI.log reports access denied for the HKLM\SOFTWARE\Microsoft\MediaPlayer\Settings\MP3Encoding\LowRate registry key. In regedt32, I'm blocked from display HKLM\...\MediaPlayer\Settings and below, and "are allowed to view the current permission settings, but... can make a change." Except that I can't. I can enter the change but get «...» Access is denied"trying to apply them. So this is the first problem that I need help.
  But of course it's more than a registry key and the subkeys, because MSE too is affected and will download but not install virus definitions. WindowsUpdate.log reports: failed to install with error 80070643.
  My user account (it's the only one!) is part of the Administrators group and all that I tried to verify administrative permissions is positive. This is a new issue. No virus/malware, according to MSE, Lavasoft Ad-Aware, MalWarebytes Anti-Malware.
   
  Original title: cannot update Media Player or Microsoft Security Essentials - access denied Erors

  Hello

  Question: Impossible to update Windows Media Player

  Run the Fixit and see if it helps.

  Difficulty video Windows Media Player and other media or from library (Fixit)

  Problem: cannot install Microsoft Security Essentials

  Perform the steps from the link below and see if it helps.

  I can't install Microsoft Security Essentials

  Hope this information helps.