Satellite A200-23W: problem installing Windows Vista

Similar Questions

• Satellite A200-1YO - problems installing Windows XP Home edition

  Hi guys,.

  First of all I'm new here so Hello to everyone here and I hope you can help me with my problems of software.

  I recently bought a laptop model Toshiba Satellite A200-1YO provided with windows vista (which must be frank, pants and IMO too demanding for the machine) and I have a problem with vista, because some of its features do not seem to work, for example, I'm having a lot of trouble getting some of the webpages to open now, they simply hang out.

  now, I didn't install windows xp but I don't have an external floppy drive. This is not a problem but because I can use Nlite to integrate the drivers in a new ISO of Windows XP.

  The problem is that I have 4 sets of drivers: ICH7M_32bit, ICH7M_64bit, ICH8M_32bit and ICH8M_64bit. As I install Windows XP 32-bit while I'm more or less some that I have not need 64-bit drivers but when I install Windows XP by using the modified version of windows xp slipstreamed, what I get at startup is a BSD error telling me that something has crashed on my hard drive , however I can't say which crashed as the screen disappears after 15 seconds if that so I guess there is something wrong with the drivers I use (though I must admit that I'm not sure the drivers 32-bit to use)

  advice and assistance regarding being able to install windows xp would be welcome, as I said above, however, I can only use Nlite since I do not have a usb floppy drive.

  Satellite A200-1YO has a chip with the ICH8M southbridge Intel GM965.

  So you need the driver for SATA ICH8M_32bit.

• Satellite A200-1FL: problem installing Bluetooth on Windows 7

  Hello world

  I have a Toshiba Satellite A200 1FL (PSAE6E) with Windows Vista and I just installed Windows 7 32 bit (no update or upgrade).

  The problem is that when I try to install the bluetooth stack, it installs all ok, but the driver.
  I took the version 7.10.12 for Windows 7 32 bit from http://aps2.toshiba-tro.de/bluetooth/?page=download.

  The driver installation window presents itself and the progress bar does not move.
  I waited for a long time and nothing, no response, so I have to cancel.

  However, the software has been installed and when I try to start Bluetooth config or any other tool, the same phenomenon occurs: the driver installation window shows upward and nothing.

  Also, I tried to follow the installation instructions of command since the drivers toshiba download page guess what drivers are each options.

  Can someone knows why this phenomenon occurs?
  Am I missing something or is there a known issue with the Bluetooth in Windows 7 driver?

  Thanks in advance,

  Jorge

  Hello

  On my A500 during installation Bluetooth driver, he invites me to activate the Wlan switch. I don't know if A200 is equipped with WiFi switch. If this is the case, turn it on and try to install. I have more no other suggestion.

• Having problem installing Windows Vista Sp2, I keep getting error 0x800B0100

  original title: HELP! Having problem installing Windows Vista Sp2, I keep getting error 0x800B0100

  My checksur.log said

  =================================

  Preparation of control system was updated.

  Binary version 6.0.6002.22441

  Version 9.0 package

  2011-06-29 15:32

  Checking Windows Service Packages

  Checking of manifests package and catalogs

  (f) CBS MUM corrupt 0x800F0900 servicing\Packages\Package_4_for_KB948610~31bf3856ad364e35~x86~~6.0.6001.2123.mum line 1110: nam

  Checking package Watchlist

  Watchlist checking

  Checking packages

  Control components store

  Hello

  These should help to resolve the problem:

  How to fix Windows Vista error 800b0100 update
  http://www.SimpleHelp.NET/2008/07/06/how-to-resolve-Windows-Vista-update-error-800b0100/

  Error Code 800b0100 in Windows Update
  http://www.instantvista.com/800B0100.html

  Error message when you try to use Microsoft Update or Windows Update Web sites to install
  updates: "0x800B0100.
  http://support.Microsoft.com/kb/956702
  How to reset the Windows Update components? -a Mr Fixit
  http://support.Microsoft.com/kb/971058

  Description of the system for Windows Vista, Windows Server 2008, update tool and
  for Windows 7
  http://support.Microsoft.com/kb/947821

  ==========================================================================

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues
  http://support.Microsoft.com/kb/947366

  You select Download - SAVE? After download go where you put it and right click
  on and RUN as administrator.

  Download Service Pack 2 x 86 32 bit
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=891ab806-2431-4D00-afa3-99ff6f22448d & displaylang = in

  Download Service Pack 2 x 64 64-bit
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=8ad69826-03d4-488C-8f26-074800c55bc3 & displaylang = in

  Create a new ADMIN account with your password - same then REBOOT (do not logoff) and
  log on to the new account and try the download.

  How to obtain the latest Windows Vista service pack
  http://support.Microsoft.com/kb/935791/

  Service Pack Center
  http://Windows.Microsoft.com/en-us/Windows/downloads/service-packs

  ================================================================

  If necessary, you can get free reports of incidents however generally above allows to solve this problem.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• problem installing Windows vista service pk1

  I am trying to install Norton antivirus software to clean the system.  I get the error message that the system does not meet the requirments.  My OS is Windows Vista 32-Bit.  Message says I have to install Windows Vista ServicePK 1 (KB936330).  I try to install it, it says that it succeeded.  I have to restart manually, but when I come back, it shows that it is NOT installed.

  Hello

  Try the following link for download... its free Microsoft... for valid users...

  http://Windows.Microsoft.com/en-us/Windows/Security-Essentials-download

  Hope it solves your problem...

• Problems installing Windows Vista Edition Family Service Pack 1

  Windows Update was performed several times, each time trying to install Service Pack 1. Supposedly, it was 6 times with success but never appears in the control panel / system.

  Windows Update was performed several times, each time trying to install Service Pack 1. Supposedly, it was 6 times with success but never appears in the control panel / system.

  ========================================
  Perhaps the following links provide some useful:

  Learn how to install Windows Vista Service Pack 1 (SP1)
  http://Windows.Microsoft.com/en-us/Windows-Vista/learn-how-to-install-Windows-Vista-Service-Pack-1-SP1

  Learn how to install Windows Vista Service Pack 2 (SP2)
  http://Windows.Microsoft.com/en-GB/Windows-Vista/learn-how-to-install-Windows-Vista-Service-Pack-2-SP2

• Satellite A200 (PSAE6) crashes on Windows Vista Ultimate 32-bit

  Hello

  I recently had a few frequent freezes on Windows Vista Ultimate 32-bit Edition, I think it's maybe the video card (ATI HD2600 mobility). I have already downloaded and installed the latest drivers from the Toshiba site, but it continues to, sometimes, when I'm playing games, the screen blinks for 5 seconds or more and then would become black, completely erased, but the background sound and everything still works well and I am able to shut down the PC by pressing the power button once and then restart it normally.

  It's a minor problem, the major problem is the freezing point, it freezes completely without warning, but oddly enough, he freeze by practicing a game! But freezes on normal operations (internet, office, etc.). I did the tests, tests of HARD drive memory, all in good health, and worse, on the Windows Event Viewer could not detect any problem, simply says 'unexpected system shutdown.

  I'd appreciate help please.

  Thank you

  Hi I do not know if this will help, but you've got service pack 1 installed on your laptop, as when I installed it on my desktop the first time it caused blue screen errors and gave me a lot of problems, including the error messages that seemed to come with applications, I opened and a boring IQRL driver equal or less than but could not work why and then ultimately , I had so many problems that I had to completely reformat my office and I removed my scanner XP and webcam (both had vista drivers) and when I reinstalled service pack 1, it was beautiful, if by any chance do you have anything attached to your XP laptop and vista drivers as these seemed to be what was causing my errors.

  Also a question about your graphic card drivers, I have the same laptop as you and was looking for updates to the graphics driver and couldn't find them anywhere on the site, where did you find yours? I use Vista Home Premium 32 bit, my model number is A200-28 p (PSAE6) and I would like to know if there is a new graphics card driver but can not find on the basis of knowledge, so the fact you have updated your would be could you point a new user in the right direction :-)

  Thank you

  Simreaper

• Satellite A200-1Z3 - cannot install Windows XP Home edition

  I tried using Nlite, and "slipstreaming" manually manually hard detected and installed windows, but when the window trying to load the first time, a blue screen come up with the error «a recently added material may collide,...» "blah blah... After this reboot of Windows. I tried several times but same problem.

  I put request manufacturers to Toshiba, please, please do not force Microsoft Users to use VISTA, since very heavy graphics, but Toshiba put only 1 GB of RAM in A200-1Z3.

  I want to downgrade XP, please help me how can I install XP and load the first time?

  Hello

  Do you use Windows XP Home with SP2 integrated edition installations CD?
  What about the RAM. If you need more you can do to upgrade. It is not the problem. Buy compatible module and place it on the inside.

• Re: Satellite A200: Question about the Windows Vista serial key

  I have a Toshiba Satellite A200 and I doubt, in everest, I can see the key of Windows Vista, but it's different to the Windows key in the tile to the bottom of the laptop.
  I change anything in the laptop because I bought, I have use once the recovery cd, but I have not a pirate key or something like that.

  Why this different key?

  Post edited by: Admin

  I agree with the user above.
  The serial key you will find at the bottom of the device is not similar to the serial key that can be read using a few 3rd party applications!

  But you don t need such series on your Toshiba laptop key.
  The restore CD contains an image of Toshiba which is already activated!

• Satellite A200-137 - cannot install windows after the hard disk crash

  last week my a200-137 crashed and now I have the new hitachi 500 GB hard drive on it, even before the accident.
  I have install with Toshiba recovery DVD windows Vista on it and after succesfull installed I have to start windows, it says prepare for first use windows then I have to wait a while and then I get the message that windows setup is not complete. But it is complete!

  After trying to install 3 times with recovert I tried to install windows xp.
  After a few minutes and transering files, I don't get the message no disc found! It is said that there is no hard drive on the laptop!
  But when I start the start menu or the settings menu, I can see the 500 GB Hitachi hard drive!

  So why windows can't find hard disk and why can't I start windowds visat after installing with the recovery dvd?

  > So why windows can't find hard disk and why can't I start windowds visat after installing with the recovery dvd?
  On this virtual path, it is not easy to say why you can not install recovery image. It would be interesting to know if the same thing will happen when you replace the HARD with the same or identical.
  This title was the original HARD drive?
  If possible, try to get original Microsoft installation disc and check if the HARD drive will be recognized by Vista or Win7 and of course if you will be able to install and boot OS preinstalled.

  Regarding the installation of Windows XP Home edition: it is well known that the WXP installation will start properly due to lack of SATA driver that must be loaded prior to installation of WXP begins.
  Check out this forum and you will find hundreds of threads with detailed explanation why this happen and what can you do about it.

• Problem installing Windows Vista Service Pack 1

  Greetings,
  I've been running Windows Vista for a while now. In general, I have no problem. I tried to install Service Pack 1 with a bit of luck.

  My first attempt was to install using Windows Update. When it installs it gives me error 0 x 80070490

  My second attempt was to install it as a Sandalone by Windows.com. He also gave me an error
  0 x 80070490

  I followed the instructions at http://support.microsoft.com/kb/947366.
  I tried all resolutions and nothing will work.

  Both times when I try to install it, the bar fills up all the way and then fails (no reboot or anything else) with in a few minutes. It restarts what only it either just fails or not. I tried using safe mode and normal Mode.

  I tried to repair Windows to solve the problem. While the repair done, the computer has restarted and gave me the 'blue screen of death', the only way he could properly load was to load mode without failure. I had to wrap the last know configuration to start normally.

  I'm running out of good ideas please help

  Desperate, try: http://support.microsoft.com/kb/947821
  Description of the preparation tool update for Windows Vista for Windows Server 2008 and Windows 7 system

  Usually, the tool is available to computers that could benefit from these tools, but you can manually download the same and see if it helps.

  Unfortunately with your error code, it is usually a necessary repair install, but the damage may be too much even for a repair installation.

  BTW - back up your important files just in case where you don't have to start over.

  TaurArian [MVP] 2005-2010 - Update Services

• Problem installing Windows Vista after Linix based system crashed.

  So when I bought this laptop it was running Vista, I then upgraded to 7.  After running windows 7 for a few months, I decided to try Ubuntu Linux.  I made a mistake when trying to dual boot and ended up taking my computer windows.  Ubuntu crashed while I was doing something to my Iphone with it and she would not allow me in the operating system.  I got my restore disk and installed windows again, but when I did I found that all my drivers are not installed for my wifi card and the graphics card.  I have the drivers also disk, but here shows all installed.  What should I do to recover my laptop to factory settings?

  So when I bought this laptop it was running Vista, I then upgraded to 7.  After running windows 7 for a few months, I decided to try Ubuntu Linux.  I made a mistake when trying to dual boot and ended up taking my computer windows.  Ubuntu crashed while I was doing something to my Iphone with it and she would not allow me in the operating system.  I got my restore disk and installed windows again, but when I did I found that all my drivers are not installed for my wifi card and the graphics card.  I have the drivers also disk, but here shows all installed.  What should I do to recover my laptop to factory settings?

  Hey SteveZea

  you don't say if you used your laptop to join here or not

  go to your site to manufacturers of portable computer with the computer that you use for here and find a download section

  find the drivers for your laptop model number, download and save if you use another computer to get here

  copy to flash drive, if you use another computer to do this and reinstall on your laptop

  If the problem persists then contact the manufacturer of your laptop as their recovery process is not microsofts you have problems with

  Walter, the time zone traveller

• Problem installing Windows Vista Service Pack 1 (KB936330)

  Service Pack 1 will not download, end as an error message.  The error Code is 0 x 80070002.  Can someone help me with this?

  Hello

  You also need Service Pack 2.

  Click Start > right click on computer > left click on properties > see if you have Vista 32 bit or Vista 64-bit installed.

  It will also tell you which SP you have installed.

  Then, choose the download of 'bit' OK to use to install Service Packs, installation of SP1 first if it is not already installed.

  Vista SP1 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=30

  Vista SP1 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=21299

  Vista SP2 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=16468

  Vista SP2 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=17669

  This Information Microsoft can help you resolve problems that you encounter during the installation of Service Packs for Vista.

  http://support.Microsoft.com/kb/947366

  ___________________________________________________

  «Error Windows Update '0 x 80070002' or «0 x 80070003 "»

  http://support.Microsoft.com/kb/910336/en-us

  See you soon.

• Problems installing Windows Vista on a p9x79 pro raid setup.

  I'm trying to load Vista in raid0 on 2 WD 1 TB SATA 6 gb hd black
  I have an asus p9x79 pro MB with the latest bios. 3.0.0.1184 OROM.
  Samsung sata dvd drive

  When Vista first starts loading he asks "a required cd/dvd drive device is missing. If you have a driver disk, cd, dvd or usb flash drive please insert it now.

  I used the flash drive I created with the asus dvd provided with Mo and he installed the 'Inter c600 series chipset sata raid controller' allowed the installation to continue.
  Then it asked for the product key, and then license, then type setup, where you want to install.

  At this stage there is no disk to install to so I click on "drivers" and select the c600 Intel a new, but still no disks.

  Here's the funny thing, when I try to load windows 7, it detects the disk in the screen "where you want to install" without having to load the c600 drivers again. He's right there. Win 7 loads fine if I skip the product key, but I know that won't last long.

  I need vista loading because my win 7 is an upgrade.
  I hope someone can help me with this.

  Thank you. Bob

  Hello

  I suggest you to ask your question on Microsoft Technet for assistance.

  http://social.technet.Microsoft.com/forums/en/category/windowsvistaitpro

• Satellite A200-1AD - downgrade from Windows XP Home edition

  I've read all the other different threads around the upgrade/downgrade to XP, but I have a few questions.

  1. What do I need to change the BIOS before I start to replace Vista by XP or can I wait until I loaded the base XP and then make the BIOS change?

  2. If I try and update the BIOS for XP and it crunches the laptop is covered by the warranty?

  If the 2 answer is Yes, then I'll save a step by step process that I do to change the operating system from Vista to XP. Any help much appreciated.

  Hello Ken

  All I know is some BIOS designed for Windows XP Home edition for computer series laptop Satellite A200. I installed Windows XP Home edition on my A200 but some FN keys do not work properly. Other stuff works well and WXP turns quite quickly.

  I recommend installing WXP without updated BIOS to see if there is a serious problem. If this is not the case, leave such BIOS what.