Create an array of MovieClips with a statement

Similar Questions

• creating an array of movieclips in AS2 OOP

  Long proceedural timer trying to pass to the OBJECT-oriented programming. Using the book "Object Oriented Actionscript for Flash 8" I created the example of a class with a movieclip that is passed as a parameter. Attempting to expand in an array of clips/classes and without success.
  
  Here's the class:
  
  -----------------
  location class extends MovieClip {}
  
  var targetMC:MovieClip;
  var x: Number;
  var y: Number;
  
  function {location (x: Number, y: Number, targetMC:MovieClip)}
  this.targetMC = targetMC;
  This.x = x;
  This.y = y;
  moveTo(x,y);
  }
  
  function moveTo (x: Number, y: Number) {}
  this.targetMC._x = x;
  this.targetMC._y = y;
  }
  
  }
  ---------------------------
  and for a single clip the following work in the fla
  
  //----------------------------------------------------------
  attachMovie ("dot", "dot", 1.1, 100);
  var myLocation:Location = new location (dot, 200 300);
  //-------------------------------------------
  
  However when I try to create a table of 'points' it does not work.
  
  //-----------------------------------------
  var myLocation:Array = new Array();
  for (x = 0; x < 5; x ++) {}
  attachMovie ("dot", "dot" + x, 1, 1, 100 + x);
  var myLocation [x]: location = new location (_root ["dot" + x], 200, 100 + x * 30);
  }
  //---------------------------------------
  
  Also how to avoid using _root in this?

  Great, thank you. I thought it was associated with OOP and am happy that it was just As Basic.

• How to create the new MovieClip with front and rear images?

  I'm still a real newb... I'm unable to learn how to create a two-sided movieclip and load a different image on each side.

  Thank you!

  Mark

  You can't do that, but you can simulate it.  If you use a rotationX or rotationY you'd a displayobject that is not visible and the other is visible when you almost 90 degrees.

• How to create a form of relief with highlight on the edge, in 2015 of the Illustrator

  I work in 2015 of the Illustrator. How to create a shape (3d) raised with highlighted on the edge, like this:

  

  It will work as a form, not a button, so there is no need of different States. I looked at a few tutorials to create buttons, and they seemed much more complicated that I think you need to create a form like this.

  -Stuart

  Experience 3D bevel & emboss, front view and Tall-round bevel. Adjust the lighting you want. Then add a light shade.

  Personally I have always found these bevel unsatisfactory effects, but you can produce similar results using carefully controlled mixtures

• Select with case statement and a formula of the IIR

  Hi, I was looking to get help regarding a statement writing box with a statement select statement all. I tried to reproduce a formula IIf access well that just wanted to check that the query I wrote is correct, any advice would be appreciated.

  [code]

  Select *.

  Of

  (

  Select name, month, duration, volume, time_spent, date1, date2,.

  -case when 'date' > = 'date1' then '1' other '0' end as departure,.

  -case when 'date' < = "date2" then '1' other '0' as end ending

  Of

  (

  Select *.

  of call_1 cd

  inner join call_2 ON cd.name = cl.queue cl

  )

  )

  ;

  [/ code]

  I want to know is where I have my ' select name, etc, I would change that to select * to make it easier instead of typing all the field_names outside, but I don't know how to do and also what follows is 2 IIF formulas from an access database for the start of the final case statements so I just wanted check I wrote it correctly.

  [code]

  departure: IIf ([date] > = [date1], 1, 0)

  [/ code]

  [code]

  ending: IIf ([date] < = [date2], 1, 0)

  [/ code]

  Any advice would be appreciated.

  Hello

  Whenever you have any questions, post a small example of data (CREATE TABLE and only relevant columns, INSERT statements) for all of the tables involved and the results desired from these data.
  Explain, using specific examples, how you get these results from these data.

  If the output depends on what anyone outside the application itself (for example, when it is run) and then include a few different examples and the results you want of each given the same sample data. For example, "if I run on November 19, 2013, while the results should be... because... but if I run between November 21 and November 27, then the results should be... because...". »
  Always say what version of Oracle you are using (for example, 11.2.0.2.0).

  See the FAQ forum: https://forums.oracle.com/message/9362002

  318f20b8-a3d0-4FB4-bb0f-73785250b7d4 wrote:

  Hi, I was looking to get help regarding a statement writing box with a statement select statement all. I tried to reproduce a formula IIf access well that just wanted to check that the query I wrote is correct, any advice would be appreciated.

  [code]

  Select *.

  Of

  (

  Select name, month, duration, volume, time_spent, date1, date2,.

  -case when 'date' > = 'date1' then '1' other '0' end as departure,.

  -case when "date."<= 'date2'="" then="" '1'="" else="" '0'="" end="" as="">

  Of

  (

  Select *.

  of call_1 cd

  inner join call_2 ON cd.name = cl.queue cl

  )

  )

  ;

  [/ code]

  I want to know is where I have my ' select name, etc, I would change that to select * to make it easier instead of typing all the field_names outside, but I don't know how to do and also what follows is 2 IIF formulas from an access database for the start of the final case statements so I just wanted check I wrote it correctly.

  [code]

  departure: IIf([date]>=[date1],1,0)

  [/ code]

  [code]

  ending: IIf ([date]<>

  [/ code]

  Any advice would be appreciated.

  DATE is not a function of Oracle; in fact, it's a terrible name for a column or function, because it blends with the DATE data type.

  In Oracle, the function SYSDATE returns the date and time, according to the clock on the database server.  So, SYSDATE can return a value as November 19, 2013 06:33:15.   If you want to midnight the same day (i.e., November 19, 2013 00:00:00) and then use TRUNC (SYSDATE).

  String literals (for example the string which consists 5 characters d, a, t, e, and 1) go inside the single quotes. Numbers and the names of columns only.

  If you want to include all the columns, more some calculated values, in a SELECT clause, then you must use a name table or alias before the *.  (See select_2 below.  To do this, assign the alias j to display online.)

  Maybe you wanted to say something like:

  Select *-it's select_1

  de)

  Select j. *-it's select_2

  , case when SYSDATE > = date1 then 1 or 0 end as departure

  , case when SYSDATE<= date2="" then="" 1="" else="" 0="" end="" as="">

  de)

  Select *-it's select_3

  of call_1 cd

  inner join call_2 ON cd.name = cl.queue cl

  ) j

  )

  ;

  As mentioned in a previous answer, you should be careful about the use of "SELECT *" in production code.

  In select_3, it would be better if you explicitly listed the columns you need.  It can improve efficiency and maintenance.  In this request, queue and the name will be always the same, so you probably don't want to include both of them in the result set, in any case.

  In select_1 and select_2, it is acceptable to use "SELECT *", assuming that select_3 is fixed.

  Moreover, there is no point in using subqueries here.  You can get the same results simply in a single query, without any subqueries.

• Glow internal change position of text effect when used with the State of the button.

  I've seen other old discussions on this topic.  I'm trying to use the inner glow on the mouse down state of a button.  When you apply the inner glow effect, the text is pushed down into the text box to the position that it is in normal state and the substitution of the.  How to do this?

  Attached images show the a screenshot of what the mouse to the low State looks like muse with the glow effect used inside.  The second screenshot shows the real effect with what is really happening by using the preview of Muse (the same thing happens in Safari and Firefox).  The metrics of positioning between normal / roll the mouse downwards and above are identical.

  Help, please.

  

  

  To work around this problem, the simplest method is to add a shine to other States, but use the background color for the glow. This creates the same offset as the rollover State but does not display differently.

• An array of objects with a filling loop. Noob PHP question.

  Hey guys,.

  You are all such a great help! Here's another one for you, the simple code below should create an array of objects of pizza (and it does) then display each item in the order. However... each object in the table seems to inherit the properties of everything what was the last item entered for a reason any.

  Copy the following code:

  <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
  <html xmlns="http://www.w3.org/1999/xhtml">
  <head>
  <meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
  <title>Untitled Document</title>
  </head>
  <?php
  class pizza{
            public $price;
            public $description;
            public $name;
  }
  
  
  
  
  $menu2=fopen("pizzaMenu2.txt","r") or exit("System Error!");
  $pizzas = array();
  $arraypos=0;
  
  //This loop does all of the READING and populating of variables
  while(!feof($menu2))
    {
              //First get the array position
                                $arraypos = (int)fgets($menu2);
  
            //Then Put in Title in title2 array
                                $pizzas[$arraypos2] = new pizza(0,0,0);
                                $pizzas[$arraypos2]->title = fgets($menu2);
                                $pizzas[$arraypos2]->description = fgets($menu2);
                                $pizzas[$arraypos2]->price = fgets($menu2);
    } //End of reading loop
  
  
  //begin writing data
  $arraypos=1;
  while ($arraypos <=3){
            echo "the array is in position: ".$arraypos;
            echo "<br />";
            echo $pizzas[$arraypos2]->title;
            echo "<br />";
            echo $pizzas[$arraypos2]->description;
            echo "<br />";
            echo $pizzas[$arraypos2]->price;
            echo "<br />";
            $arraypos++;
  }//end of writing data loop
  
  fclose($menu2);
  ?>
  <body>
  </body>
  </html>
  
  

  This returns:

  the array is in position: 1
  Test Pizza Two 
  The same as one with an extra one, yum! 
  22.99
  the array is in position: 2
  Test Pizza Two 
  The same as one with an extra one, yum! 
  22.99
  the array is in position: 3
  Test Pizza Two 
  The same as one with an extra one, yum! 
  22.99
  

  When it should return this:

  the array is in position: 1
  Test pizza One 
  Loaded with all that test pizza goodness! Lots and lots of ones 1111! 
  11.99 
  the array is in position: 2
  Test Pizza Two 
  The same as one with an extra one, yum! 
  22.99
  the array is in position: 3
  Test Threeza! 
  Do you see what I did there? I added a three to pizza, hahaha, I am so punny. 
  33.33 
  

  using the following text file pizzaMenu2.txt:

  1
  Test pizza One
  Loaded with all that test pizza goodness! Lots and lots of ones 1111!
  11.99
  3
  Test Threeza!
  Do you see what I did there? I added a three to pizza, hahaha, I am so punny.
  33.33
  2
  Test Pizza Two
  The same as one with an extra one, yum!
  22.99
  
  

  Now, I did line-by-line analysis and showed that the values are entered in the objects in the appropriate table, but everything that happens ultimately crushes all other objects, so ultimately, I have 3 objects in my table which are all the same. I don't know what I'm missing here.

  $pizzas [$arraypos2]

  must be:

  $pizzas [$arraypos]

• How to create dynamic arrays parallel/side-by-side in Adobe cycle

  Is it possible to create dynamic arrays parallel/side-by-side in Adobe cycle?  If so, how?

  Given that the tables have different sizes, in that I am running wrapping issues with running adjustment of Western characters and characters from the pagination with checkpoint.  Any other ideas?

  In fact, I had tried this solution ("wrapping the tables in a subform of position and set to automatically adjust the height and allow page breaks"), but it did not work.  Something to do with nested subforms of position within a subform control flow etc.  So to make it work, I set the page to be a subform of position and the auto-hauteur value and allow page breaks and I unpacked the paintings while they were only 'wrapped up' of the page itself.

• Added an movieclip with motion tween.

  Hello!!   I created a movieclip with a motion tween and I added it to the stage with the following code: var pop: msgBox = msgBox new; addChild (pop); the msgBox is the class name of the movieclip and pop is the name of the instance of it.   the problem is that the animation is not read correctly. for example, I drew a rectangle and converted to a movieclip symbol and then I converted inside himself to a graphic symbol. I created a motion tween growing form of movieclip, but when I added it with the above code, it starts to animate properly but on its iteration, it starts to not behave correctly. It seems that flash pro, adding a new instance on each iteration that overlap on the previous.   What should I do to fix this?   Bravo!   Atar.

  That is roughly what I have described as being your problem... come back you on the frame when you create a new instance, so it gets created.  You will need to put a conditional around this code any process only once if you only want to process once.

• ScrollBar of a movieclip with dynamic content

  How to make the roll bar work for a movieclip with dynamic content.

  var senderLoad: LoadVars = new LoadVars();

  var receiveLoad: LoadVars = new LoadVars();

  senderLoad.sendAndLoad ("http://www.web.com/my_php.php", receiveLoad, "POST" ');

  receiveLoad.onData = {function (src)}

  var messageA:Array = src.split(",,,");

  messageA.pop ();

  var xPosition:Number = 0;

  var yPosition:Number = 0;

  for (var i: Number = 0; i < messageA.length; i ++) {}

  var msgA:Array is get [i].split(",,");.

  _root.patHolder.attachMovie ("garSpecBtn1", "btn" + i, _root.patHolder.getNextHighestDepth ());

  _root.patHolder ["btn" + i] ._x = which;

  _root.patHolder ["btn" + i] ._y = PositionY;

  PositionY = PositionY + 31.0;

  _root.patHolder ["btn" + i].textBlack.text = Msgto [0];

  _root.patHolder ["btn" + i] .number_lnk = "http://www.web.com/images/" + Msgto [0] + ".png"; ""

  _root.patHolder ["btn" + i] .txtN = "pattern" + Msgto [2];

  _root.patHolder ["btn" + (i)] .onRollOver = btnOverNumber;

  }

  }

  The scroll bar should work with patHolder.

  Add a scrollpane to your stage component and assign an instance name (for example, sp).  assign the symbol from the library of patHolder a login link (for example, patHolderID).  You can then use:

  sp.contentPath = "patHolderID";
  var _root.patHolder:MovieClip = sp.content;

  var senderLoad: LoadVars = new LoadVars();

  var receiveLoad: LoadVars = new LoadVars();

  senderLoad.sendAndLoad ("http://www.web.com/my_php.php", receiveLoad, "POST");

  receiveLoad.onData = {function (src)}

  var messageA:Array = src.split(",,,");

  messageA.pop ();

  var xPosition:Number = 0;

  var yPosition:Number = 0;

  for (var i: Number = 0; i

  var msgA:Array is get [i].split(",,");.

  _root.patHolder.attachMovie ("garSpecBtn1", "btn" + i, _root.patHolder.getN extHighestDepth());

  _root.patHolder ["BTN" + i] ._x = which;

  _root.patHolder ["BTN" + i] ._y = PositionY;

  PositionY = PositionY + 31.0;

  _root.patHolder ["BTN" + i].textBlack.Text = Msgto [0];

  _root.patHolder ["BTN" + i] .number_lnk = "http://www.web.com/images/" + Msgto [0] + ".png"; ""

  _root.patHolder ["BTN" + i] .txtN = "pattern" + Msgto [2];

  _root.patHolder ["BTN" + (i)] .onRollOver = btnOverNumber;

  }

  }

• How to create the object rectangular box with a pure action script.

  How to create the object rectangular box with a pure action script?

  I think, it can be done through the clip library, but I'm not sure. Please, I want to take the suggestion to create a rectangular box as a script through

  Take a new file and write about the first image the code below, it works fine:

  var rect = new Shape();
  rect.graphics.beginFill (0xFF0000);
  rect.graphics.drawRect (0, 0, 100,50);
  rect.graphics.endFill ();

  var MC = new MovieClip();
  mc.addChild (rect);
  addChild (mc);

  If this doesn't solve your problem then paste the error you get

• addisctl.sh: leave with the State 1

  Salvation;
  
  My OS: sparc instance stsem r11.5.10.2: demo
  
  When I try to start the service apps I have this error:
  addisctl.sh: leave with the State 1
  
  Log files:
  /VIS/VISORA/8.0.6/vbroker/bin/osagent
  Osagent began.
  Osagent saves messages in the VIS/visora/8.0.6/discwb4/util/osagent.log file.
  Waiting for the ADO start...
  ADOS has begun.
  OAD records messages in the VIS/visora/8.0.6/discwb4/util/oad.log file.
  Discoverer Locator began.
  Locator saves messages in the VIS/visora/8.0.6/discwb4/util/locator.log file.
  Cannot bind to the ADO. Turn it back on...
  
  ADO is not running
  Osagent is stopped
  Locator is stopped
  Could not stop the gatekeeper. No process id of file found.
  Could not stop the discoverer Sessions. No process id of file found.
  Cannot stop all preference discoverer. No process id of file found.
  Cannot stop any collector of discoverer. No process id of file found.
  /VIS/VISORA/8.0.6/vbroker/bin/osagent
  Osagent began.
  Osagent saves messages in the VIS/visora/8.0.6/discwb4/util/osagent.log file.
  Waiting for the ADO start...
  ADOS has begun.
  OAD records messages in the VIS/visora/8.0.6/discwb4/util/oad.log file.
  Discoverer Locator began.
  Locator saves messages in the VIS/visora/8.0.6/discwb4/util/locator.log file.
  Registration Session discoverer
  oadutil reg: could not bind to the ADO
  The Collector registration
  oadutil reg: could not bind to the ADO
  Apply preferences file: /VIS/visora/8.0.6/discwb4/util/pref.txt
  Finish the application preferences
  
  
  Closure of register...
  Synchronizing registry files...
  Registration of preference discoverer repository
  oadutil reg: could not bind to the ADO
  
  addisctl.sh: leave with the State 1
  
  This demo of the instance. Wiht 11.5.10.2 demo default disco is 4i? I read some doc. and it says upgrade, it, if problem exsist upgrade, should I update for demo or if I do not use future discoverer in demo I do not need to do nothing?
  
  Thank you

  Hello

  This demo of the instance. Wiht 11.5.10.2 demo default disco is 4i? I read some doc. and it says upgrade, it, if problem exsist upgrade, should I update for demo or if I do not use future discoverer in demo I do not need to do nothing?

  If you do not plan to use Discoverer 4i, you can simply exclude this script adstrtal.sh script - see (Note: 398835.1 - how to stop creating Addisctl.Sh Autoconfig after discoverer upgrade).

  Please note that discoverer 4i was desupported for E-Business Suite users in October 2006.

  Note: 186981.1 - Oracle Application Server with Oracle E-Business Suite Release 11i FAQ
  Note: 313418.1 - using discoverer 10.1.2 with Oracle E-Business Suite 11i

  Kind regards
  Hussein

• adstrtal.sh: leave with the State 1

  After that applyng HRMS patches, I'm not able to start applications in a single node that has report servers and CONC.
  
  applications: 11.5.10.2
  HP operating system
  
  
  You run adstrtal.sh version 115.19
  
  
  touch: unable to create the /xxxxapp/xxxcomn/admin/log/xxx_xxxx/11181554.log
  Unable to create the log file - permission denied
  Attempted to write to:
  /XXX/app/xxxcomn/admin/log/xxx_xxxxx/11181554.log
  
  
  
  adstrtal.sh: leave with the State 1

  Please publish the following as root user:

  # cd /app/xxxxcomn/admin/log/
  # chmod -R 755 
  # chown -R applmgr:dba 
  

  Then, try issuing the command touch user applmgr.

• I created a custom and registered with a specific name date format. However, when I open a new worksheet, my saved format does not display in the menu drop-down? Am hoping that I don't need to create the same format for each new sheet?

  I created a custom and registered with a specific name date format. However, when I open a new worksheet, my saved format does not appear in the menu drop-down? Am hoping that I don't need to create the same format for each new sheet?

  You must save the spreadsheet containing the new date as a model format and use this custom template for each new spreadsheet where you want that this date format personalized at your disposal.

• Which is the * which replaces the zip codes with "United States".

  So I use the calendar for my daily schedule of the customer. Recently, I made the mistake of upgrading to OS (always a mistake with apple these days) and now have a MAJOR problem with the location field.

  Some * at apple decided to replace the postal code SUPREMELY USEFUL with 'United States', when I get an address and ap auto fills in the rest. I tried replacing it and not selecting in the dropdown list options that appears when I start typing in a speech, but it is on its own.

  Must say replacing a very specific data item for something so broad that the United States is one of the stupidest things, Apple has done recently (apple doing stupid things is unfortunately too often PJ {Post job}).

  I drove to the wrong address several times that big cities like THE have often more than a street with the same name. Get a zip code has been a great way to avoid this problem, but some Morón has decided to get rid of post code data and the access point has no option of preference to add in the zip code.

  Be sick enough Apple make these kind of nonsense that would never happened before (Ex: decide to move progress bars to 100% immediately independent to the extent of the progress are actually completed).

  Anyone know a work around? The only advice I receive from apple is to return to an older operating system (great work apple.) Train me to not trust and avoid your new operating system.  Great idea, is NOT).

  Post edited by: codr

  I know that we just spend an hour on the phone with apple care and they told us the same thing. We need these postal codes to be there so that we our sellers in the right place. missing or being late for the appointment is very professional. We need apple to fix this ASAP.