Access ntuser.dat.log in NETWORK services folder refused even in safe MODE

Similar Questions

• the Ntuser.dat.log file size

  Hello

  I found this hidden file (located in the C:\Document and Settings\MyUsername\ folder) ntuser.dat.log , keeps changing itself... (every few seconds/minutes)
  its size is 1 KB to 400kb ~
  Is this normal?
  I thought that he should only updated when logging in or out, am I wrong?
  My OS is Windows XP SP3.

  Hello

  The NTUSER. DAT is a registry file. NTUSER each user. DAT file contains the registry settings to their individual account. The Windows registry, is a "central hierarchical database" that contains information about user profiles, hardware and software contained on a computer. Does Windows constantly reference registry throughout its operation of its files. The configuration of the "HKEY_CURRENT_USER" of the registry branch is supported by NTUSER the current user. DAT file.

  Note: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry. Check out the following link.
  http://support.Microsoft.com/kb/322756

• Ntuser.dat.LOG files are important to include in a backup to transfer files to a new computer?

  Ntuser.dat.LOG files are important to include in a backup that is used to transfer files to a new computer? When you try to backup or copy files I get the message that these files (there are 4 of them) cannot be saved or copied because they have already opened and used on the computer. A single file is 256 KB and another has 0 KB. Can not see the other two

  Hi MAnnetteFox,

  Thanks for posting the query on Microsoft Community.

  You do not need to take backup of these files and they are normal files that will be generated.

  In the future, if you have problems with Windows, get back to us. We will be happy to help you.

• Whenever I try to install itunes 64-bit, my computer says "windows service install could not be accessed. This can occur if you are running windows in safe mode,

  Please help with the problem of itunes

  Whenever I try to install itunes 64-bit, my computer says "windows service install could not be accessed. This can occur if you are running windows in safe mode or if windows install is not installed correctly "...  I tried everything that the computer does not work please help as soon as possible, thank you

  Hello

  • What version of Windows are you using?
  • This happens with this program only?
  • What were the changes made before the problem occurred?
  You can check this link:
  Problems installing and uninstalling programs on Windows computers
  http://support.Microsoft.com/kb/2438651

• Can't install Itunes, get an error that the Windows Installer Service could not be accessed. This can occur if you are running Windows in safe mode"

  OP: Install problems Windows

  I tried to install iTunes, but he said that "the Windows Installer Service could not be accessed. This can occur if you are running Windows in safe mode or if Windows Installer is not installed properly. Call support personnel. "They gave me similar messages by other programs I've tried to install as well.

  Because I was not running Windows in safe mode in time, I assumed that the installer was not installed correctly. So I tried to download from here: http://www.microsoft.com/downloads/en/details.aspx?familyid=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  But then I got error messages like "this update does not apply to your system" and "not enough memory is available to process this command." I tried all the links and none of them worked for me. I'm running a Vista Home Premium 64 bit, and I 2.38 GB of available RAM, so I don't think that the lack of memory is the problem here. What should I do?

  1.] I had a previous version of iTunes, but I got rid of it with Revo Uninstaller.

  I was looking around and I found this: http://www.vistax64.com/vista-installation-setup/96680-repair-windows-installer-service-vista-all-versions-2.html

  I followed the direction of the last message (by F'n Vista) and changed the value of WOW64 Registry and now iTunes has installed perfectly and works now. I'll try to install other programs that I got hurt with previously. Thank you very much for your help! :)

• Error "the Windows Installer Service could not be accessed. This can occur if you are running Windows in safe mode or if Windows Installer is not installed properly. »

  Crazy became Windows Installer

  have windows Xp Sp 3 and when I want to uninstall or install a program error message appears saying that "the Windows Installer Service could not be accessed. This can occur if you run Windows in Mode safe mode or if Windows Installer is not installed properly. Contact your support team. "and I are not in safe mode when I try to install or uninstall programs.  I checked for a virus and found that none please help because I want to uninstall some programs to free up disk space.

  Original title: Windows Installer Service could not be accessed error during installation or uninstall a program

  Hi, Honorine,.

  Follow the steps listed in the following article:

  Error message when you try to add or remove a program on a computer that is running Windows XP or Windows Server 2003: "the Windows Installer service is not to be accessible.

  See also:

  Problems installing and uninstalling programs on Windows computers

• Thunderbird is stuck does not. even in safe mode. (win7) SOLVED by disabling Windows prefetch and superfetch services

  Thunderbird is stuck in the mode "not responding". I tried various fixes suggested on the web, such as restarting in safe mode, using Thunderfix and except on records of Thunderbird to antivirus scans, but nothing works. FYI, my antivirus is Norton Internet Security. I hope someone can help. Thank you.

  You could take a little further...

  Please start * Windows * safe mode with active network
  -win8 http://windows.microsoft.com/en-us/windows-8/windows-startup-settings-safe-mode
  -win7 http://windows.microsoft.com/en-us/windows/start-computer-safe-mode#start-computer-safe-mode=windows-7

  Always in Windows safe mode, start thunderbird in safe mode
  - http://support.mozillamessaging.com/en-US/kb/safe-mode

  Problem disappear?
  Just reply to inform us of the results.

• I've upgraded to window 10, but not happy with windows 10 I returned to windows 7, but I'm unable to log on to the pc. the pointer of the mouse and keyboard are frozen device, even in safe mode.

  After the upgrade to windows 10, I loved not the style was thus to Windows 7, but I have not been able to log on the PC since. He's going through commissioning, but when on screen password box the pointer of the mouse and keyboard do not respond.

  This happens in safe mode for.

  The PC is a Sony Vaio laptop.

  Any suggestions,.

  John

  Hello Orwell,

  Thanks for posting your query in Microsoft Community.

  You have a Windows 7 installation disc?

  As you cannot start your computer at all, I suggest to run a Startup Repair to repair the damaged boot system files and try to boot into normal mode. See the section: How to use Startup Repair in the following link.

  Startup Repair: frequently asked questions

  If this does not help, try to boot from a disc to install Windows 7 on the Windows recovery environment mode and then try to run the Startup Repair tool and check if you are able to start normally with mouse and keyboard.

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

• No network after a power failure and only works in safe mode with network. Operating system is Vista SP2.

  The latest patch to update this system was .net framework 4

  This behavior has occurred on several machines after a power failure in our factory caused all systems restart.

  I have run chkdsk

  I ran sfc

  SafeMode internet works fine.

  Clean boot does not solve the problem.

  Cannot remove .net framework 4 because I can't get windows installation service to work properly.

  X red on the connection in normal mode

  I run with the reset.cmd file subinacl to reset all the registry settings. It gave no results.

  I looked at all of the services that are running successfully in normal mode and those that are run in mode safe and that services to start. This got me internet again in normal mode, but we are far from finished there are a lot of services is still needed. I'll make one by an approach to see what will begin and what doesn't.

  System Restore was successful, but had no bearing on the issue. Here's the solution that worked.

  Safe Mode boot

  on computers that are running Windows live onecar I ran as administrator onecare removal tool

  Remove the Adobe Flash 10 utility

  Open msconfig and services.msc

  enable all services that are running in safe mode to run msconfig on the next reboot. Also enable required services for Windows updates and windows install

  Enable

  BITS, com +, Windows udpate, workstation and service server and all dependent services. If you miss some that is good because you and individual services and start them from services.msc when the next restart.

  Restart the machine.

  I found that after this reboot a few updates have been posted in the update list installed in the control panel that had not been previously listed.

  Remove all instances of Java (cannot be done in safe mode)

  Reinstall Java and flash player from their respective Web sites

  I installed Microsoft Security Essentials www.microsoft.com/security_essentials

  Run windows update and install the updates.

  run msconfig and select normal startup

  Restart and ensure normal operation.

  It takes about 1/2 hour, 1 hour per machine which was much lower than a full reinstall.

• Ntuser.dat locked by system after log off

  tons of stuff on the internet about this but no real difficulty. We currently use roaming profiles on a 2 k 3 Server for our Citrix configuration. We met the issue of temporary profiles created because the ntuser.dat file is locked by the system in their ordinary account profile. This has actually been a problem for several years to the contract and I am now cleaning.

  We have the GPO to set to point to a share to store profile data, refers to the configuration of the roaming profile.

  first thing I noticed was tons of SID keys under HKLM\Software\Microsoft\Windows NT\Current Version\Profile list. I deleted all these keys and profiles on the servers of applications under Docs & settings. now on the first login my account has been created on the server, SID created key. after disconnection of application, he removed key SID in the registry, writes data to the profile on hand but profile left on application server because ntuser.dat has been locked. then, the next time you connect, it starts to create profiles of temperature.

  Maybe it's a little much info for the real problem at hand, but I wanted to explain the Setup here incase it helps.

  does anyone have a solution for this?
  UPHClean is not an option because we use roaming profiles. they are always locked.

  or does anyone have a script that I could use that force a version of the log off?

  any info would be much appreciated. Thank you guys

  Hello

  You can ask your question in the TechNet Forums: http://social.technet.microsoft.com/Forums/en-US/home

  Thank you.

• Windows 7 "the network connections folder could not retrieve the list of the network adapters on your Machine. Please make sure that the network connections service is enabled and running. »

  Get the message "the network connections folder could not retrieve the list of the network adapters on your Machine. Please make sure that the network connections service is enabled and running. "I am NOT able to connect to the internet please help. I use Windows 7 OS

  Hi Odile,

  Thanks for posting your question in the Microsoft Community forum.

  It seems that you have a problem with the connection to the Internet and receive the error message "the network connections folder could not retrieve the list of the network adapters on your Machine. Please make sure that the network connections service is active and running".

  
  I imagine the inconvenience that you are experiencing. We are here to help and guide you in the right direction.
  I may need a few more details to better understand the issue.
  1. did you of recent changes on the computer before this problem?
  2 do you have wireless or wired Internet connection?
  Method 1:
  We'll first run check network troubleshooting if this can help.
  Using the troubleshooter from network in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7
  Method 2:
  If the problem persists, I suggest you try the procedure described in the article and see if it helps.
  Wireless and wired network problems
  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1
  Method 3:
  If the problem persists, I suggest you try the procedure described in the article and see if it helps.
  How can I troubleshoot network card?
  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-fix-network-adapter-problems
  For more information, please see the link.
  Why can't I connect to the Internet?
  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet
  Get back to us and let us know the State of the question, I'll be happy to help you. We, at tender Microsoft to excellence.

• Access to the data after the managed service VOImpl in bean method call

  I use JDeveloper 11.1.2.4.

  I created a method to Interface customer and he calls you a managed bean.

  The method is exposed in the control of data and I have a links to it through links on the page.

  The method runs just a view of criteria for a row of data in the database.

  But, because the method does not have a return value, how could access the View object data.

  Here's the Service method and the method of the bean management;

  The service method: in PersonVOImpl.java - should result in 1 row:

  public void getPersonByCnViewCriteria (String cn)

  {

  ViewCriteria viewCriteria = this.getViewCriteria ("PersonVOCriteriaByCn");

  Reset a display criteria of values that may was resolved at design time

  viewCriteria.resetCriteria ();

  this.setCnBind (cn);

  this.applyViewCriteria (viewCriteria);

  this.executeQuery ();

  }

  Method in managed Bean: I have a linking operation method to access the Service method.

  
  

  It seems that the Service method is executed successfully.  But, how to access the data after the call?
  

  
  

  protected void getPersonByCn (String cn)

  {

  BindingContainer bindingContainer = this.getBindings ();

  OperationBinding operationBinding = bindingContainer.getOperationBinding("getPersonByCn");

  Map operationsParamsMap = operationBinding.getParamsMap ();

  operationsParamsMap.put (WorkFlowBean.PROPERTY_CN, NC);

  Object result = operationBinding.execute ();

  If (! operationBinding.getErrors () .isEmpty ())

  {

  }

  
  

      // How to access data after the call?
  

  }

  You should never use a class VOImpl or VORowImpl in a managed bean. If you have to use them, create Interfaces and use.

  I'm not too sure if it's good to return a view in a method object.

• What is NT Authority/Network Service? Should I be worried?

  On my 'observer of events (Local)' check to see if something occurred that may contribute to the current boot extremely long process on Windows XP.  (question reported previously, recommended to increase the size of the memory, for which thank you very much).

  I saw a string of entries NT Authority/Network Service from the moment that I started my PC.

  Anyone could explain what it is/fact & it should be there, in very simple terms please!

  
  

  It of scary, should I worry?

  If so, what should I do about it?

  The NT AUTHORITY account is built into account mainly used to run the XP Services.  Many XP Services run under the NT AUTHORITY account (it's like a user account, but you will not see in your list of users) and there are different levels of different Services.  You can see some of them as belonging to the ongoing process in the Manager of tasks and you can see them all with granularity increased if you use Process Explorer (see below for a link).

  The types are:

  NT AUTHORITY\SYSTEM (System Services)
  NT AUTHORITY\LOCAL SERVICE (local Services)
  NT AUTHORITY\NETWORK SERVICE (Network Services)

  You can search for events on the World Wide Web and get ideas.  It's where people events they see and then to the top of their questions, ideas and solutions:

  http://www.EventID.NET/

  If you find your event in the discussion, the first idea or discussion does not necessarily mean that it is the "answer" to your situation, so carefully read all ideas to find the one that sounds more like your situation, you are bored or find a satisfactory explanation.

  The most interesting newspapers are usually the Application and the system.

  Some newspapers such as security and Internet Explorer may be completely empty or have just a few items.  The default value
  settings for XP does not log this activity, unless you need to solve a problem in these areas.  If you enable logging for them the papers fill up quickly and could adversely affect the performance of your system with all the extras (often unnecessary) activity.

  If you have Microsoft Office installed, it has its own newspapers, and they can be empty or occasional boring activity very little or, if there is no problem with your desktop applications.  It's normal.

  Not every event is a problem, some are informational messages that things work very well, and some are warnings.

  However, no event should defy reasonable explanation.

  Each event is sorted by Date and time.  Errors will be red Xs, warnings will have yellow! s. informational Messages have white is.  Not every error or warning event means that there is a serious question.  Some are excusable at boot time when Windows starts.  Try to find only the events to date
  and the time around your problem.

  If you double-click on an event, it will open a window of properties with more information.  On the right are black up and down arrow keys to scroll through the open events. The third button that looks like two overlapping pages is used to copy the details of the event in your Windows Clipboard.

  When you find an interesting event that occurred at the time of your question, click on the third button at the top and arrows to copy the details and then you can paste the details (right click, paste or CTRL-V) the text in detail here for analysis.  Remove all personal information from your information after you paste If you are forced to do so.

  If you paste an event, it will look something like this annoying system startup event:

  Event type: Information
  Event source: Service Control Manager
  Event category: no
  Event ID: 7035
  Date: 14/07/2010
  Time: 17:54:18
  User: Jose
  Computer: computer

  Description:
  The Remote Access Connection Manager service was sent successfully a starting control.

  For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

  To get a fresh start on any log of the event viewer, you can choose to clear the log (the log backup is available), and then reproduce your problem, then just look at the events around your show and troubleshoot events that are happening when you have your question.

  If you want another set of eyeballs on your situation of memory which is not speculation, follow these steps:

  Click Start, run and enter in the box:

  Msinfo32

  Click OK, and when the system info summary appears, click Edit, select all, copy and paste then return here.

  There will be some personal information (such as the user name and the name of the system), and what appears to be personal information for you, simply delete the pasted information.

  Download Process Explorer, so you can see what is 'really' running on your system, especially behind those svchosts several process see you in the running task manager.

  Download Process Explorer from here:

  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  You'll like Process Explorer when you get the hang of it.  Process Explorer is the Manager of Windows taskbar on steroids.

  Process Explorer installs nothing so it won't slow down your system since it works only on request.

  Process Explorer can seem a little intimidating at first because it has so much information, but you will begin to make love the way it works when you're looking for performance problems.   You can even say EP you want it to be your new default 'Task Manager' value in the future.  You can always run the original tasks as Manager.

  Once you get Process Explorer running, expand the columns, made drag the corners of the screen for it's largest, etc., so you can see as much information as possible in the window.  Now you can really see what is running on the system.

  Here's a screenshot of my poor system when I use Process Explorer:

  http://img222.imageshack.us/img222/2567/ProcessExplorer.PNG

  The CPU column is usually the most interesting start with performance issues - which uses the most?

• HP LAP WITH OS WINDOWS7, HOURS TO LOG ON TO THE DESKTOP COMPUTER, HARD PULL NO ACCESS, ŒUVRES OK IN SAFE MODE, NO NOISE.

  I have a hp mini computer with window7 starter.  my turn to take like 30 or minutes of the Bureau and it was only after the message read hp wireless Assistant not working do not.  read below have windows check online for a solution, close the program or debugging.  I touched the debugging and nothing happens, I then press the red x, the message disappears and the tour continues it is slow to load up on the office page.  I tried to go to the control panel to find the solution.  manal control appears but you click on the link and nothing happen but a bigger than the regular blue circle and so who is disappear and nothing.  in several attempts to try again, he said security windows or error 2. do not react or working on something like that.  in my startup fast and is turn safe mode to normal and internet speed except any noise I use my knees for netflix and hulu, and he wouldn't let me access the control panal to shoot of boredom.  After two hours of patience, I was able to see what the windows said my problem, sorry appcrash I has not copied all the info.  I just had to get the sos there.  I can't afford a new round.

  Hello

  Check with HP Support, their drivers and documentation online and ask in their forums
  on known problems.

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  =======================================================

  Use the startup clean and other methods to try to determine the cause of and/or
  eliminate problems.

  ---------------------------------------------------------------

  References to Vista also apply to Windows 7.

  What antivirus/antispyware/security products do you have on the machine? Include
  everything you've ALWAYS had on this machine, including those you have uninstalled (they
  remains of leave behind which can cause strange problems).

  ----------------------------------------------------

  Follow these steps:

  Try these to erase corruption and missing/damaged file system repair or replacement.

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker
  (SFC.exe) program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows
  Vista or Windows 7
  http://support.Microsoft.com/kb/929135

  Use advanced tools to solve performance problems in Windows 7
  http://www.howtogeek.com/HOWTO/6152/use-advanced-tools-to-troubleshoot-performance-problems-in-Windows-7/

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/default.aspx/GP/slow_windows_performance?p=1

  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes without doing anything-
  then right click on taskbar - task manager - take a look at stored by -
  Process - Services - this is a quick reference (if you have a little box on)
  Lower left - show for all users, then check that).

  How to change, add or remove startup programs in Windows 7
  http://www.SevenForums.com/tutorials/1401-startup-programs-change.html

  Is a quick check to see who are loading method 2 - using MSCONFIG
  then after a list of these here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out what files, registry keys, and other objects
  processes have open, which DLLs they have loaded and more. This unique
  powerful utility will show you even owned by each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically
  When your system boots and you connect. Autoruns also shows you the complete list
  locations of registry and files where applications can configure start automatic settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor file system, registry, process, thread and DLL
  activity in real time.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  WhatsInStartUP - free - this utility displays the list of all applications that are
  loaded automatically when Windows starts. For each application, what follows
  the information is displayed: Type of startup (registry/Startup folder), Command - Line
  Channel file, the product name, Version, company name, location in the registry or
  file system and more. It allows you to easily disable or remove unwanted programs
  that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe
  not. The window Watcher says it all, every window created by each execution of the statement
  program, if the window is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Think about it an absolute must - manually update your drivers.

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded
  on your system. For each driver in the list, additional useful information is
  Poster: load address of the driver, description, version, product name,.
  company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit Maker as replacements and system manufacturer of device which are
  the most recent. Control Panel - write - graphics card - device manager
  the brand and complete model of your video card - double click - tab of the driver-
  Note the version information. Now click on UPdate Driver (this can do nothing
  MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
  This will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard
  If there are 3rd party with their own software and drivers and the other main device drivers
  you have.

  Now, go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restore)
  and site (Realtek, Intel, Nvidia, ATI, for example) and get the manufacturer and device
  their latest versions. (Look for the system to update the BIOS, Chipset and software updates
  Site of the manufacturer here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN -.
  REBOOT after each installation.

  Always check in the Device Manager - drivers tab to be sure the version you are
  installation actually appears. This is because that some rollback of drivers before the
  later is installed (particularly that audio drivers) so install a driver - reboot.
  Make sure that it is installed and repeat if necessary.

  Repeat to the manufacturers - BTW to the device makers DO NOT RUN THEIR
  SCANNER - check manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers under Windows 7 (updated drivers manually using
  the above methods is preferable to ensure the latest drivers from the manufacturer of system
  and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  If you update the drivers manually, then it's a good idea to disable driver facilities
  in the updates of Windows, which leaves on Windows updates, but it will not be installed
  pilots who are generally older and cause problems. If updates provides a new
  driver then hide it (right click on it) and then go get new ones manually if
  you want.

  Stop Windows 7 to automatically install device drivers
  http://helpdeskgeek.com/Windows-7/stop-Windows-7-from-automatically-installing-device-drivers/

  How to disable automatic driver Installation in Windows 7 / Vista
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/

  Turn off Windows Update Device Driver search prompt in Windows 7 / Vista (for the)
  Professional, comprehensive and Enterprise edition)
  http://www.AddictiveTips.com/Windows-tips/disable-Windows-Update-device-driver-search-prompt/

  ===========================================

  Refer to these discussions because many more excellent advice however remember to check
  your antivirus, the main drivers and BIOS update programs and also to solve problems
  with the first method cleanboot.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Migrated domain users are needed to access shared folders on the network with AD username old or need to share with the new AD ID

  Dear Sir

  Migrated domain users are needed to access shared folders on the network with AD username old or need to share with the new AD ID

  I am in a field & I'll migrate with a domain name.

  EX: now I'm in the field of the AAA tomorrow my domain name will change to BBB. User accounts are created in two AAA & BBB and the two domain user IDs are different.

  data servers are also migrating with the new domain.

  is it possible to access share with the old user id folder in new field or both to share the files again with the new user ID Active directory.

  Kind regards

  Chauvet J.

  Hello

  The question you have posted is related to professional level support. Please visit the below mentioned link to find a community that will support what ask you:

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/