Access panel back Officejet 6000

Similar Questions

• OfficeJet Pro L7590 show me the error on the LCD screen mini printer 'rear access panel is open.

  Hello

  OfficeJet Pro L7590 show me the error on the LCD screen mini printer 'rear access panel is open. How to fix Ica?

  Operating system is windows 7 but I do not connect to the PC again

  Please Help me ASAP

  Concerning

  Check the document I linked below. Let me know if it worked or not.

  http://support.HP.com/us-en/document/c01626835

• W7 professional after remote access to my desktop computer 'loses' his printer. Windows / devices and printers / "Officejet 6000.

  W7 Professional (both sides) after remoting in through our company intranet, my desktop computer 'loses' his printer.  If I go to "windows key" / devices and printers / she sees a "Officejet 6000', which is connected via usb, windows, but there as"not specified ".

  Hello

  Thank you for visiting the Microsoft answers community site. The question you posted would be better suited in the Technet forums. Please visit the link below to find a community that will support what ask you:

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

  I hope this helps.

• OfficeJet 6000: OfficeJet 6000 does not print

  Replace the ink cartridges for Officejet 6000 would not print.  It prints the words Page Windows printer to test a test page of color with a printer icon in the upper right, then at the center of page 4 with a white fill boxes; yellow fill, blue fill and a red fill.  That's all.  I touched a "print test page" and the paper comes out blank, although that normally shake it like the print head moves back.

  Hello @Pistol_shooter, greetings!

  Thank you access the Forums from HP Support for extra support! I see that you are having problems printing using the Officejet 6000. I will do my best to help you with this problem.

  I suggest you first check the empty ink to ensure it is enough ink. Then proceed to clean the print head using the software installed on your computer. Since your computer desktop, double-click the printer icon, the printer wizard / solution Center will open. Go to settings and navigate to the cleaning of the printheads.

  I found a wonderful document that gives you instructions step by step to solve this problem. Please visit: http://hp.care/2dtFaXe

  Please let me know if that solves the problem. Good luck!

  See you soon

  Please click on 'acceptable' on the post that solves your problem to help others to find the solution. To show gratitude for my help, please click the 'Thumbs Up icon' below!

• Officejet 6000 printing problems

  My Officejet 6000 will not print. The power and light of the resume light blink - normally, this means that there is a paper jam in which there is not. Or that the rollers need cleaning I did. I also cleaned the cartridges where the ink comes out.

  Also I tried to unplug the printer and try again without success. When the power is connected, the green light - after a few seconds it starts to blink and the printer goes into his routine of cleaning after this stop the Summary button illuminates and flashes also. I'd love to hear if someone has the same situation and managed to solve it!

  Have you removed all paper from the input tray and look in the status bar with a flashlight to make sure nothing is caught in the rollers?

  So, did you remove the module front/back/rear access door to make sure that nothing is stuck to the back of the rolls?

  I also advise to open the upper part of the printer and remove all of the ink provides unit; including the print head.  Don't you see that anything taken under/the print head Assembly all about?

  Hard reset of the printer with the supplies out of the unit:

  Unplug the unit when turned on

  Disconnect the other end of the power cord from the wall jack directly

  * Wait 30 seconds

  * Plug the unit back to

  Once the device is fed up reinstall ink supplies in the printer.  Also check to see if the truck can slide left and right all the way inside the printer by hand.

  There is also a document with additional steps found here.  I hope this helps.

• HP Officejet 6000 wireless E609n double-sided printing Option not available

  I have the printer above with a duplexer. There is no available duplex printing option in the print dialog box.  If I open the application HP Officejet 6000 E609n, under settings > Options tab > printing HP accessory two-sided (duplexer) is not checked. When I check it, then the duplex printing option is available in the print dialog box. However, after a print job with two back, the option is no longer available for further work. Reopening of the HP Officejet 600 E609n application reveals that the two box HP-sided accessor (duplexer) printing automatically returns to the off State.

  

  Hello

  Try to restart your Mac and find any difference, also run Software Update from the Apple menu and make sure there is no HP or Apple updates available, then check any change.

  If it persists, try resetting the aboid printing system any curropted configuration:

  * Be aware that reset the printer system will eliminate any existing queue and reset all custom settings driver.

  Click on the Apple menu and then click on System Preferences.
  Some Printers & Scanners.
  Right click (or Ctrl + click) your product with the Printers list in the left panel and then click on reset printing system.
  Click OK to confirm the reset.
  Type your user name and password.
  Click OK. The printing system resets.

• Cartridge, HP 920 XL: Wireless HP Officejet 6000, the problem of black ink printer

  I have a HP Officejet 6000 wireless printer.  It's 2nd HP 920 XL cartridge that has not worked.  It does not show that it is empty, but it will not be printed.  Our school cannot afford to replace these at this rate.  Please let me know what to do to make this work correctly.

  I removed the printer as my default so that I could use another printer.  When I ran the program again to check for problems, the guest asked me to add the printer returned as default.   When I reconnected it the printer as long as my default, I tested the printer and it worked.  Don't know why remove and then add back in the set, but he did.

• Officejet 6000 ink

  I have an Officejet 6000 ink and i ' ts was set up to print only in black.  The other day he had run more black ink and to my great surprise, he was also out the other colors of ink.  I bought a new cartridge 920xl and to my surprise that has not fixed the problem.  So the question is that I have all the work ink cartridges can get this printer to print again... ?? .. . If so that was a waste of money by buying the black cartridge, because it costs more than the ink, then what I paid for the printer.

  I'm sorry that you are experiencing this problem with the black print cartridge and printing. You need to replace all the other cartridges so that the printer to print to.

  Some older printers mode allows to print with just black only, but it does not work. Even if you want to print in BLACK ONLY, your color cartridges still used to mix with black to form a TRUE COLOR BLACK. It's only a small amount of each used cartridge, but after awhile, it will need replaced.

  So will have to get the other cartridges back, until the printer reverts to the normal state and printing.

• HP Officejet 6000 a: after far right stuck paper jam

  HP Officejet 6000 a and Windows 10.

  After jam paper and jam, clearing printer turn on, goes through current transport parks, start right, flashing lites power and resume. Doctor says print "general Printer Error. Transport to open the lid does not come to Center and did not manually move parked at the far right. Close the cover, flashing lites power and resume, press summary and unplug the power cord when the cart is centered. Remove print head, close the lid, back the start-up routine. Open the lid and now transport stops in the Center and all the lites normals. With lamp torch and lid open (with cardboard in photo electric switch) and print head installed in position, pressing on the set of the view CV under presses of subsequent print head print head to prevent fresh ink while the printer is in sleep mode, remove the cardboard (lid open simulating) tray does not move downwards releasing the print head. Has gone through all six steps of the Solution and no help. Impossible to open the case to observe the load mechanism. Nothing else to try? Printer purchased January 2011 and printed only 5003 + pages and no problems so far. Do not throw with using more than that most just bought full set XL HP 920HP cartridges. should be possible to solve other than maintenance workshop, can buy nine being the least expensive.

  Help, please. Thank you

  Jesse

  Hi @jlmulanax1,

  Welcome to the Forums of HP Support!

  I understand that this transport on your HP Officejet 6000 a printer does not move correctly. I will definitely do my best to help you.

  I would try the steps in Th guides, r HP Officejet 6000 (E609) and 7000 (E809) Wide Format Printer Series - an "impossible cartridge" or "incompatible cartridge" Message is displayed on the calculationand lights flashing on the HP Officejet 6000 (E609a) and 6000 (E609n) wireless printers.

  You describe it sounds like the transport has stalls and if this is the case and you are unable to find the obstruction while the transport mechanism is defective.

  If you have completed all the above steps and your product still has a problem, service the product.

  Contact HP for service in all countries except Asia-Pacific.

  First, check your product warranty to check your warranty printer status and then go to contact HP support to find an authorized dealer or to schedule a repair.
  Cost of repair out-of-warranty printers may apply.
  What you can do, is to use the following link to create yourself a file number, then call and it can help to expedite the appeal process:
  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on: contact HP options - click Get phone number
  File number and phone number are displayed.

  Hope that answers your question. Thank you for posting!

• HP Officejet 6000 only print left side of controls. prints everything well.

  HP Officejet 6000 printer, system is Windows7. We use an insurance agency software and I am trying to print checks and the printer only prints the left side of the check and heel.  The software is ok because I can print checks very well of our generalization printer that uses the entire office.  I can print emails, documents, etc. of the Officejet and they print the entire page.  It's just the checks that print weird.  This has even puzzled IT society.  I tried the HP print and Scan Doctor thing, and he said that everything is fine.

  Any suggestions?

  Thank you!!

  I'm back in business now! Print controls very well. We all remote on a server and I got the printer installed on my desktop, but not inside the server, and I don't even think it.

  Thanks for your help!

• OfficeJet 6000 software install problem

  Hi all

  I have messaged HP about this problem but I was wondering if someone here could help.

  I just bought an Officejet 6000 as the title. I have installed the software network no problem at all on 3 laptops running Vista, 1 PC under XP and 3 PC running Windows 7.

  But in general on MY laptop the software will not be installed:

  Setup gets to step 2 and said that it has detected old software, it then crosses on uninstall process and restart the computer to restart Setup starts again comes to the phase 2 says that it has detected older software uninstalls, restarts the computer... and it continues indefinitely.

  -There is no HP software in Add/Remove programs on the computer

  -J' tried HP scrubbers, the base receives to step 4/5 61% and morality, we get to step 6/11 46% (I think) and then it's there, I left these two running overnight.

  -J' had the Virus software, firewall and pop-up blockers

  Any help will be very much appreciated, as my knowledge that a user is advanced, but I am not a professional.

  Provisionally pending aid

  Andy

  !!! SORT!

  After a few more bother I managed to get the printer to show that it is auto in the control panel network and installed this way... oh so happy

• For officejet 6000 e609n driver not installed

  I installed the full driver for Officejet 6000 e609e and windows 7 says not installed with an error code 28 driver for officejet 6000 e609n.

  I solved the problem yesterday and posted my solution to 17:25 - my solution is somewhat against HP installation method (I think).  I have a small wireless network and the printer is shared.  Here is my solution, but I would like to thank you for having responded.

  It may be wise to reboot before continuing the installation process.

  Make sure that your printer is on (on).

  Access your installation from a CD, file or elsewhere and starts to run it.

  • Click on 'add a device '.
  • Choose "wireless 802.11 network connection" or one of the other two choices as adapts to your situation.
  • Select your printer by clicking it.

  One solution presented by Hsquared

• printing two Officejet 6000

  HP Officejet 6000 wireless

  I am unable to get the duplexer to work. The duplexer is installed correctly. The properties of the printer confirms that it is installed.  When I try to print, there is no option to double printing automatic two sided. The manual says 'enable' the duplexer by simultaneously pressing the red arrow and network buttons but the 6000 wireless is not a network button.

  Someone knows how to help?  Thank you.

  Ok

  We therefore see progress and now know that the equipment is working correctly, the problem lies in Word or its settings...

  Do you use the Word dialogue box to set duplex printing?

  From within Word, click file > print and make sure the correct printer is selected.

  Click on properties / settings to access the printing preferences page.

  Open the page layout tab, you see the ability to print on both sides?

  If if try setting it and print the document, then check for the difference.

  If you encounter a problem, please specify as detailed as possible, for example the options are not listed for double-sided printing, the options are listed and selected, but will not have a place?

  Also try a new document empty and check for the difference to deny a problem of document...

  Finally, I would say that the Word Document size A4 or letter, a size not supported as example can prevent duplex printing.

  Please let me know, any amendment, as well as the results, if the problem persists.

  Shlomi

• HP Officejet 6000 printest test page, but do not print anything else. How to print wireless?

  I reinstalled the printer.  It printed the page test perfectly, now I will not print anything else.  How to print again?

  Hello

  Welcome to the Windows 7 community!

  From your problem description, I understand that you can not print from HP Officejet 6000. I take this opportunity to help you.

  Let us perform the following troubleshooting methods and check that it helps to resolve the issue.

  Method 1: Run the printer Troubleshooter
  first of all, make sure that your printer is turned on and connected to your Windows computer according to the manufacturer's instructions. Then, try the printer troubleshooter, which will attempt to diagnose and solve your problem automatically.
  For more information, see the article below:
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Method 2: Restart the Print Spooler Service
  You must be logged on as administrator to perform these steps.
  a. open administrative tools by clicking the Start button, then Control Panel. In the search box, type administrative tools, and then click Administrative Tools.
  b. double-click on Services. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  c. right-click on the print spooler service and then click Properties.
  d. on the general tab, next to startup type, make sure that automatic is selected.
  e. If the service is not already running, under Service status, click Start and then click OK. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  Method 3: Configure the driver to correct the printer port
  on the tab "Ports" of the "Printer properties" window, select the port for the printer driver.
  a. from the Windows desktop, open the printer properties window.
  b. click the Ports tab.
  c. under "printing on the following ports; Select the port to which your printer is connected.
  Example: In this example, the printer is connected to the "USB001 virtual printer Port.
  d. click on 'Apply' to validate the changes.

  Click on general tab and then click on 'Print Page of Test' to confirm that the changes fixed the problem.

  You can also check out the links for more information.

  Printer problems in Windows: http://windows.microsoft.com/en-US/windows/help/printer-problems-in-windows

  For any further assistance, I suggest you to contact HP printer Support.

  Here is the link: http://www8.hp.com/us/en/support-drivers.html

  It will be useful. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

  Kind regards!

• OfficeJet 6000: Officejet 6000 'stuck' in the wireless status

  After using the printer on a minitour HP with a USB connection for a while, I installed the software on a Thinkpad with a link wireless to a Linksys router. The combination didn't work reliably, so I removed the printer and the laptop software. However, the Officejet seems 'stuck' in a State wireless (blue light on); When I tried a clean reinstall on the minitour (from disk), the installation failed. How can I restore the printer to its out-of-the-box condition and get a clean install with USB connection?

  (I thought the Officejet 6000 is a dual-mode device, but it seems to be either / or machine.)

  Price Buhrman

  Hi BuhrmanP,

  This is the only information available for this model restore network settings.

  This information was given by the manual, page 377. OFFICEJET 6000

  

  I disable all startup programs and temporarily disable the Antivirus software before installing the printer to see if it will help.

  How to perform a clean boot in Windows.

  I hope this helps.

  Thank you.