Access PIX options

Similar Questions

• Cannot access the option of factory restore?

  Hello world. I have an old A505-S69803 that I no longer use. I have been aware of a poor student in a University nearby who profit greatly from a laptop, but cannot afford it. I want to give my Toshiba and I start cleaning off my personal data. Last step, I want to restore it to factory settings, but it does not work.

  I read everywhere on the internet that I can get here by organizing '0' during boot, but it doesn't matter. Even the manual Toshiba says to do. Is the closest I get into F8 during startup, and then selecting the Toshiba Recovery Wizard. However, it is demanding recovery media. When I bought the laptop, it was supposed to come with a recovery partition, and I did get NO media.

  How can I access the option to restore to factory since the restore partition? Thank you.

  Andrew

  Hello Andrew

  The question is: recovery partition is still available on the HARD disk?
  Last is OS installation original Toshiba installation with factory settings?

  You can install recovery image using HARD drive recovery option if the laptop has only factory settings.
  I presume that you described in the manuals, so if you didn t such fund recovery media s is not possible to have access to recovery files you have two options:
  -install the clean version of the OS. Support page all the necessary drivers, tools and utilities that you can download at Toshiba
  -Restore disc original order from Toshiba

• my windows vista family premium not working everytime I try to access the optional updates or parental control. What can I do to fix this?

  I have not been able to access the optional updates, discover my reports of parental control, change my options to account for children or add a new user in the month.  Whenever I boot, I get "Explorer of widows stopped working" then it restarts.  Its driving me crazy!  What can I do to fix this?

  Hello

  Thank you for joining Microsoft Community!

  Try the steps from the following link and check:

  Important:

  Ignore the topic upgrade in Place from the following link:

  Error: Windows Explorer has stopped working

  http://support.Microsoft.com/kb/2694911

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Hope the information is helpful; If the problem persists, or if you face issue of Windows in the future let us know.
  We would be happy to help you!

• I want to create a photo book printed by Shutterfly, but when I CREATE a photo album, the printing option is only LOCAL - how can I access print options Shutterfly?

  My goal is to create a photo book printed by Shutterfly. When I go to CREATE > PHOTO BOOK, the only option of SIZE is PRINTED LOCALLY (11,00 x 8.5 inches); Shutterfly size options (8,00 x 8.00, 11.00 x 8,00 and 12,00 x 12.00 inches) do not appear. How can I access print options Shutterfly?

  Windows 7 Professional, Version 6.1.7601 Service Pack 1 Build 7601

  Adobe Photoshop Elements 11

  World of Jim

  Hi James,

  Shutterfly and Adobe have recently agreed to remove the print service to Shutterfly who has been integrated into Photoshop Elements. Therefore, options related to the order of prints by Shutterfly are no longer available in Photoshop Elements.

  Kind regards

  Sandeep

• How can I access the 'Options' of Firefox window?

  I'm trying to change the setting for Firefox, so I can access Flash, constantly, but I can't locate the 'Options' window that I read in the articles, that I need to make changes to what I can access Flash. Can you tell me how to access? Or if not, how do I permanently change my settings so that I can access Flash again? Thanx

  You can find the plugins on the subject: addons page:

  • Firefox/tools > Modules > Plugins
  • https://support.Mozilla.org/KB/why-do-i-have-click-Activate-plugins

  You can control and manage permissions for the domain in the tab currently selected through these steps:

  • Click the address bar onthe Site identity button"(globe/lock)
  • Click on 'More information' to open ' tools > Page Info "with the Security tab is selected
  • Go to the permissions tab (Tools > Page Info > permissions) to check the permissions for the domain in the currently selected tab

• To access Advanced Options in BIOS on Satellite U500-12J

  Hello

  on my Satellite U500-12J my BIOS menu is quite simple. Hardly more than 20 options altogether... :-(

  In order to get my work of virtualization, I need to check / IO 'APIC' and "PAE/NX", which seems far beyond the scope of what Thoshiba allows me to see...

  Does anyone know how to access the RESP * activate the BIOS advanced *?

  Thank you very much
  Jan

  Hello

  I put t know what advanced settings, you want to access, but you can simply enter the BIOS settings by pressing the "F2" immediately after that the laptop has been powered.
  That's all!

  If there is no option of virtualization technology on / off then the BIOS does not support this.

  PS: VT depends on CPU if CPU does not support the VT, then you would not be able to activate this feature in the BIOS

• Satellite P850 - can't access boot options

  P850 with windows 8
  Can't access boot or bios options, I have tried all the ussual
  F12
  F2
  Delete
  ESC
  c
  function key more F12
  I tried pressed eah before turning on, I've tried everything I can think of.
  Thought really frustrated, return it to the shop

  Proceed to a complete stop - http://aps2.toshiba-tro.de/kb0/TSB2B03EY0002R01.htm
  And after a reboot, press F12 to get into the boot menu.

• Cannot access the options of color management for HP 6700 Mac OS 10.8.5 (Mountain Lion)

  Hello.

  I have the HP Officejet 6700 Premium e-all-in-one, and I can't find any way to access the color management options.

  The printer is attached (Wi - Fi) to my iMac Mac OS 10.8.5 (Mountain Lion).

  I want to correct a magenta cast for the photos I printed.  I had the problem of magenta-cast in Lightroom and use Preview to print the photos, so now I want to work with color profiles in Photoshop Elements.

  Photoshop Elements is recommended I have 'disable color management in the printer Preferences dialog box.

  However, I am not able to find for the 6700 color management preferences in settings under Mountain Lion:

  Not sub (Apple) > System Preferences > print & Scan.

  Not sub (HP utility) > Open Embedded Web Server.

  Not sub (HP utility) > the printer settings.

  Non-print preview dialog.

  I can't find any clear directions in the online help (HP or elsewhere) that I've read so far.

  Any suggestions would be most appreciated.

  Thank you!

  Michael

  Hello

  Thanks for the reply and the screen shot.

  The first thing I want to do you is to reset the printing system.
  OS X Mavericks: reset the printing system

  Then add the printer, however when it by adding not just click on the name of printers, click Add printer or a scanner. Make sure that the 'use' is set to the printer and not Airprint.
  If it is displayed as Airprint, you will be missing feautres compared to the actualy printers driver.

  After that, I'll provide you know several documents that you may find useful to perform this task.
  Documents from HP:
  Color management for the HP inkjet printing products new generation
  Advanced color management overview

  Apple documents:
  Mac OS X 10.6: edit images using ColorSync Utility
  Mac OS X v10.6: about ColorSync

  Document from CNET:
  How to use ColorSync Utility to assign color profiles in OS X

  I know some say 10.6, but they give you a reference and the idea, trying to do what you are.
  Please let me know if that helps.

• XP sp3 impossible to access the Options Menu with the keyboard

  When you try to access the security mode of the Advanced Options Menu does not respond to the keyboard. Cannot use the arrow keys to select or even select normal startup. Completely locked. Must restart. Have installed the latest drivers for the millisecond (MS Intelli Type Pro and drivers dated 29/06/2010 ver. 8.0.2190). When accessing the BIOS function and XP and all apps also all keys.

  Keyboard purchased 26/01/2011. MS Wired Keyboard 600 model 1366.

  You wish to have access to safe mode back

  The system I have, I built from the bottom upwards, it's been about 5 times. Keyboard is USB, HARD drive is IDE.

  The reason I wanted was fashion safe to remove the access and the application that cannot be removed using my program uninstaller or add/remove Control Panel. This is a secure application that I used for the password protect and hide the request. I installed the new application and should have opened the former access to files, but not installed the first new. And now, the old file is protected course. But in Safe Mode saved the day. I used msconfig to start safe mode. Neverhad this happen in the past, the only change is the keyboard and Sp3.

  Hey once again thanks for your time, really appreciate it.

• How can I access the option "replace" in Notepad and stop my typing to write about the next word?

  I have a 2002 version of Windows XP. I'm not sure how to access the "replace" option in Notepad. (I think) I don't have office because I can't afford it. But I'm in the middle of editing a document on my email account, (live) and I am typing on the next word. It is originally a mess, instead of an essay due tomorrow. I'm not used to Notepad. I was in school and working on office 2007, 2010. So if access to the option "check spelling" comes to mind, I would be grateful this answer too. It is certainly not F7 on my computer.

  Thank you

  Sue P

  Using wordpad. Then press insert to overtype mode / press again to return to normal. I don't think that the notebook has the opportunity. Think either is not a spell checker. There are freeware alternatives, that would probably do a better job than one of them. And it will have more features

  It is an alternative (and free) and can use a spell checker (you need to download it). And also has a mode to overwrite (insert press to do)

• Can't access language option "Add" via the control panel - > regional options and lang.

  Cannot access language 'Add' option via Control Panel-> regional control and options. lang-> keyboards and languages-> text services and input languages. When I click on 'Add', the language menu appears, but I can't take anything as the OK button is inactive. And I know I could do it before because I already added another language to my keyboard. Could you please help me?

  Thank you.

  Hello

  Please continue with the steps below...

  1. click on start, type intl.cpl in the start search box and press ENTER.

  2. on the keyboard and language tab, click on change keyboards.

  3. click on Add.

  4 expand the language that you want. For example, English (United States).

  5 expand the keyboard list, select the United States-International checkbox and then click OK.

  6. in the default input language list, click the language name - United States-International (where language name is the language that you selected in step 4) and then click OK twice.

  7. in the regional and Language Options dialog box, click OK.

  Notice that the language bar appears on the taskbar. When you position the mouse pointer, a ToolTip appears that describes the active keyboard layout.

  8. click on the language bar and then click States United International on the shortcut menu that appears.

  United International keyboard layout is selected.

  See the article below which talks about the same

  How to use the United International keyboard layout in Windows 7, Windows Vista and Windows XP
  http://support.Microsoft.com/kb/306560

  Add or change an input language
  http://Windows.Microsoft.com/en-us/Windows7/add-or-change-an-input-language

  If you don't see the language bar, right-click the taskbar, point to toolbars, and then click Language bar. For more information about the language bar, see the article below for more information:

  The language bar (overview)
  http://Windows.Microsoft.com/en-us/Windows7/the-language-bar-overview

  In addition to changing the input language, you can also customize your keyboard for a specific language or format. For more information about customizing your keyboard, see:

  Change your keyboard type
  http://Windows.Microsoft.com/en-us/Windows7/change-your-keyboard-layout

  Additional information:

  What can I do with regional formats and languages?
  http://Windows.Microsoft.com/en-us/Windows7/what-can-I-do-with-regional-formats-and-languages

  Change your keyboard type
  http://Windows.Microsoft.com/en-us/Windows7/change-your-keyboard-layout

  I hope that this information is beneficial.

  Thank you

  Aaron
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• site2site distance-VPN and access-PIX - no way?

  I have,

  I have a problem wrt site2site & VPN remote access on a PIX:

  My setup is as follows: PIX (6.3) puts an end to two a site2-site VPN and also should the remote access service clients using the client VPN Cisco (4.0.x).

  The problem is with remote access VPN clients, obtain an IP address on their VPN interface, but customers cannot reach anything. (Please note that the site2site VPN runs without problem)

  To be precise (see config-excerpts below):

  The customer, who has 212.138.109.20 as its IP address gets an IP 10.0.100.1 on his card-VPN which comes from the "vpnpool of the pool.

  configured on the PIX. This customer relationships to reach servers on interface 'inside' of the PIX as 10.0.1.28.

  However, the client cannot achieve * nothing *-a server on the inside or anything like that (e.g. Internet) outside!

  Using Ethereal traces, I discovered that the packets arrive inside interface coming 10.0.100.1 (IP address of the)

  VPN - client). I also see the response from the server (10.0.1.28) to 10.0.100.1. However for some reason any package does not thanks to

  the PIX to the customer. PIX-newspapers also show packets to and from the VPN client to the inside interface - and * no. * drops. So to my knowledge the packets from server to the VPN client really should be done through the PIX.

  I have attached the following as separate files:

  (o) the parts of the PIX config

  (o) packets showing PIX-log between the VPN client and the server (s) on the interface inside

  (o) ethereal-trace done inside the watch interface also packets between VPN client and server (s)

  I have really scratched my head for a while on this one, tested a lot of things, but I really don't know what could be a problem with my

  config.

  After all, it really should be possible to run site2site - and on the same PIX VPN remote access, shouldn't it?

  Thank you very much in advance for your help,.

  -ewald

  I think that your problem is in your ACL and your crypto card:

  access-list 101 permit ip 10.0.1.0 255.255.255.0 10.0.2.0 255.255.255.0

  access-list 101 permit ip 10.0.0.0 255.255.255.0 10.0.2.0 255.255.255.0

  access-list 101 permit ip 10.0.3.0 255.255.255.0 10.0.2.0 255.255.255.0

  access-list 101 permit ip 10.0.1.0 255.255.255.0 10.0.100.0 255.255.255.0

  correspondence address 1 card crypto loc2rem 101

  This means that this map correspond to these addresses. But your dynamic map is one that must match 10.0.100.0, 10.0.1.0 traffic because your pool local ip is 10.0.100.x. I think what is happening is that the return traffic from the lan to vpn clients trying to get out of the static tunnel, which probably does not exist (for the netblocks - you probably have a security association for each pair of netblocks, but not for vpn clients) and so do not.

  I would recommend adding these lines:

  access-list 105 allow ip 10.0.1.0 255.255.255.0 10.0.2.0 255.255.255.0

  access-list 105 allow ip 10.0.0.0 255.255.255.0 10.0.2.0 255.255.255.0

  access-list 105 permit 10.0.3.0 ip 255.255.255.0 10.0.2.0 255.255.255.0

  no correspondence address 1 card crypto loc2rem 101

  correspondence address 1 card crypto loc2rem 105

  Then reapply:

  loc2rem interface card crypto outside

• Access PIX using SSH when connected remotely with VPN client

  Hello

  I think that this should be a fairly simple for someone to sort for me - I'm new to PIX configuration If Yes please excuse my stupidity!

  I changed the config on our PIX to allow only access via SSH (rather than via telnet as it was previously configured)

  Now, everything works fine when I'm in the office - I can connect to the PIX using SSH without any problem.

  However, if I work from home and connect to the office using my VPN client (IPSEC tunnel ends on the PIX firewall itself) I find that I can not connect to the PIX.

  I have configured the PIX to access ssh on the office LAN subnet and the client pool of IP addresses used for VPN connections by using the following commands:

  SSH 172.64.10.0 255.255.255.0 inside

  SSH 192.28.161.0 255.255.255.0 inside

  where the 1st line is reference to the office's LAN, which works very well, and the 2nd line denotes the IP address pool configured on the PIX for VPN access.

  Can someone tell me how to fix this? I have the feeling that its something pressing!

  Thank you

  Neil

  Try the command "management-access to the Interior.

• Smartphones blackBerry curve 9320: lost 'access point option.

  Hello!

  First sorry for my bad English... I am from france, a there is no support for blackberry here.

  Yesterday, I configured my 9320 curve to use as a wifi access point. He made the word perfectly until this morning. As stated in the user manual, it just disconnected while beeing does not use for several minutes.

  In the middle of the day, every thing about "access point" disapered my place, even in the 'connection '... options

  Could someone help me?

  Thank you!

  Hello and welcome to the community!

  The first thing to do is to contact your mobile service provider... maybe they did something for this block to run on your device.

  Good luck!

• Access PIX list deny statement questions

  I have an ip address of the internet I want to access my network, however, I have problems with my access list statement. Here's what I'm trying, but it does not prevent access. Any help is appreciated

  acl_outside access-list deny tcp host 216.17.156.110 all (hitcnt = 0)

  acl_outside list access deny tcp host 216.17.156.110 host 216.183.97.151 eq www (hitcnt = 0)

  access list acl-outside deny udp host 216.17.156.110 all (hitcnt = 0)

  access list acl-outside deny tcp host 216.17.156.110 all (hitcnt = 0)

  access list acl-outside deny tcp host 216.17.156.110 eq www 216.183.97.151 (hitcnt = 0)

  deny access list acl-outside ip host 216.17.156.110 216.183.97.151 (hitcnt = 0)

  Where 216.17.156.110 is the host I want to ban my entire network or more precisely 216.183.97.151

  Also curious which direction the bed PIX list access from bottom to top assuming that since the background is where are the declarations of refusal?

  The bed PIX list ACL from top to bottom, released by when he sees the first game. If you have a license above will never be seen these lines allowing access to "any" so these lines at the bottom.

  Your best bet is to cut and paste your ACL course in a text file, add the following line TO THE TOP of the list, then delete the list ACL of your PIX and cut and paste your new back in.

  > acl_outside list access denied the host ip 216.17.156.110 all

  To get rid of your current ACL, simply do:

  > no acl_outside access list

  then, as I said, cut and paste your new back in. Make sure also your name of the access list, half the access list you have shown in your post is called "acl_outside" (Note underscore) and half of them are 'acl-outside' (note the dash). Make sure you check what name access list is applied to the external interface and line up properly.