Access restriction configuration network devices with the level of the ACS 5.0 user

Similar Questions

• How to remove an application from a device with the Profile Manager?

  I use iOS devices 9.1 in collaboration with Apple Configurator 2.1 and 5.0.15 Profile Manager. Configurator locks iPads and the Profile Manager is used for the distribution of applications. We are assigning apps in device that is a great feature. However, when I delete an application from a device with the Profile Manager, the application does not remove himself. The Profile Manager back the license and I can redistribute app for iPad one another even if the application is still installed and usable on the iPad first.

  Is this a bug? It seems that it should remove the app. If I delete the management profile in distance from the unit, it removes apps.

  Click on the gear box and then delete Apps and select the application you want to remove.

  Initially, I did what you did probably has been to select the name of the application, then press the 'less', who pulled out of the app in the list, but it has not removed the iPad, he just removed their license.  Through the gearbox and to remove it it removes of the iPad.

  You may have already thought of it, but I found this post unanswered after two months, and once I found the answer, I thought I'd put it here.

• When you try to add a network route with the "route add" command in the command line, I get the message "the requested operation requires a rise."

  Elevation required to route add command

  When you try to add a network route with the "route add" command in the command line, I get the message "the requested operation requires a rise."  What is the correct syntax to use?

  You can watch using the PowerShell...

  http://TechNet.Microsoft.com/en-us/library/bb978526.aspx

  http://TechNet.Microsoft.com/en-us/scriptcenter/dd742419.aspx

  .. .and post questions about Windows PowerShell forum...

  http://social.technet.Microsoft.com/forums/en/winserverpowershell/threads

• I can't put one of my photos as a background. It comes up with 'The file that c:\users\daniel\appdata\roaming\microsoft\windows Photo Gallery\Windows Photo Gallery wallpaper.jpg could not be written. Please help me.

  Hi, I have problems on developing an image as a wallpaper on my laptop.

  It comes up with 'The file that c:\users\daniel\appdata\roaming\microsoft\windows Photo Gallery\Windows Photo Gallery wallpaper.jpg could not be written.

  I tried right click and do it the long way to go to appearance and personalization in the control panel in the start menu. None of these work and I wonder why it's happening.

  my computer is Windows vista Home premium and is about half a year. If anyone knows how to solve the problem of it not allow me to set a background please give me suggestions.

  Dan

  Treat it as a corrupted user file.  To fix this usehttp://windows.microsoft.com/en-AU/windows-vista/Fix-a-corrupted-user-profile.  Use the new administrator account to do this.  Follow the directions given and everything will be fine and your new admin account should work normally.  Once you have ccnfired you can access, to all your acccess all of your programs and files, you can delete the old user obsolete and corrupt.

  That's all there is to it.  Now that we know, this is the profile and not the system, the solution has been set for us.

  I hope this helps. Feel free to post back with any questions as you go along.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• The results of F1-QUERY-how to restrict or to SQL with the role of access to the data?

  Hello
  
  With the help of CC & B 2.3.1.
  
  I'm configuration of a Zone of F1-OF-QUERY to get and display customer information as level account; the filter criteria will be Geo val SP.
  
  With our application, we use access to accounts and groups access to the data on users roles to restrict access to sensitive accounts, such as VIP.
  
  What keywords should I use in the SQL statement to limit the results only for group accounts to which access is included in the Dar of the user?
  
  Example: If the user has DAR 'STANDARD', it won't see accounts with group access 'VIP '.
  
  I tried unsucessfully: USER: USER ID,: USER_ID.
  
  Unsucessfull example:
  
  Select dar_cd, user_id, expire_dt
  of ci_dar_usr
  Where user_id =: USER_ID
  and expire_dt > =: F1
  
  Thks,
  
  Fabien

  Hi, Fabien,

  If you are looking to determine the current user in the box,
  the keyword to use is: USERID

  You can check the zone of F1 "F1-FAVSCR" for its use.

• Two VPN tunnels on the same device with the same protected networks

  There is a remote site that wants me to put in place two separate tunnels of VPN with the same internal IP at each end. FOR EXAMPLE

  LAN = 10.212.170.201/32, 10.212.170.202/32

  Remote network 192.168.0.0/24 =

  I currently have a tunnel between the above:

  End Point distance = 111.93.152.186

  Local endpoint point = 198.205.115.252

  Now, they want to set up a VPN for the same networks between:

  End Point distance = 115.115.130.34

  Local endpoint point = 198.205.115.252

  It is my understanding that the Cisco ASA 5520 can do. The only way I've seen this done with Cisco hardware is to use two ASAs, but there may be a way to use the costs of road or some other tricks to make it happen.

  I'm open to suggestions.

  Is a backup?

  In, specify endpoint remote second as a "backup" of the peer in the first virtual private network.  Alone will be active at the time - but there are toggled if the VPN in first dies.

• Best wireless network installation with the switch TP-Link

  Hi all

  Few question numpty maybe, but what follows... We just moved to a new (larger) home with thick walls and I want to set up a new wireless network.

  The current installation is:

  Fiber cable entering the House in the basement and connected the modem to the service provider that provides 150 mb internet. I changed the capacity wireless on the ISP's modem and connecting an airport extreme (2014 model) via the LAN to the modem. The extreme is in the office but on the 3rd floor is having connection problems than you can imagine. All rooms have access points CAT5e who all meet in the basement. I have two spare Aiport express and two Apple TV that I would use. Also I bought a TP-LINK 1000mbps (16 channels) Network Switch.

  Could someone please tell how the best set-up of my home network. For example, the Airport Express to the 3rd floor connected to the switch (wired) network or to an extreme in the Office? Apple TV also connected to the network switch?

  I would like to end up with a solid wireless network that passes without problem from extreme to Express necessary each time you walk and you want to use an Apple TV for television on the ground floor and one in our room.

  Many thanks and apologies once more for this very basic question... I have expanded my front (extreme Express) wireless network but just don't know how best to use the switch.

  Thank you

  The simplest up set... which is almost always the best game in place... would be to connect the switch 16 ports to the modem/router and then connect devices to the switch. In other words, if your modem/router has 16 + Ethernet ports, the simplest network configuration would be to plug as many devices as possible directly to the modem/router.

  Other variants are possible, for example, the network might look like this:

  Internet > Modem/Router > AirPort Extreme > switch > devices... or, you can connect certain devices to ports Ethernet on the AirPort Extreme and some to the ports on the switch.  One thing to keep in mind however... If there is a problem... Troubleshooting may not be easy since it will be difficult to know where the problem actually lies.  Much easier to all have, or of possible devices, connect to the switch.

  Unfortunately, the AirPort Express devices will be of real bottlenecks on your network.  These devices are notoriously slow as well as wireless, and even if they work well, the speed will be does not exceed 100 Mbps... since it's the speed of the port to the AirPort Express.  In fact, I expect each Express to provide a wireless signal in the range of 50-60 Mbps.

  Another thing to keep in mind of the wireless network is that Macs will usually a good work of tilting automatically to the point of wireless to the other as moving from one place to the other in the House... but the iPhones, iPads, PCs, and other mobile devices will do that very well... If they do at all.

  So with these devices, you will need to get used to temporarily disable the WiFi on the device and the device when you move in one region to the other, and then turn WiFi on must generally then pick up the signal from a nearby wireless access point.

• "Mesh" networking Possible with the Airport extreme?

  Now many of you may have heard talk about Eero and Luma, whose routers create a scope "mesh" network by installing 2-3 of their units close to each other.  Whether you're home devices move from one access point to another without a decrease in performance.  In my current setup, I have two extremes from the Airport (connected both) with SSID same, however when I wander around the House, my camera will not let go the first AE until I am in the vicinity of the second AE, how I am down to 1-2 bars of signal, and then at a certain point of annoyance it passes to the 2nd AE with a signal stronger.  Y at - it a setting that I can change which will preserve my investment in my AE current infrastructure, and to somehow get our roaming devices more intuitively go to the AP with the strongest signal faster?

  Thanks in advance.

  Y at - it a setting that I can change which will preserve my investment in my AE current infrastructure, and to somehow get our roaming devices more intuitively go to the AP with the strongest signal faster?

  Unfortunately, Apple provides no practical possibility for the user to adjust parameters either on an AirPort base station or computer or other mobile device WiFi, that would allow a device go faster... or more slowly... as "wandering" on a network with several access points.

  Macs will usually do a good job to switch automatically from one access point to another as they move from one place to another, but most of the PC, tablets, iPhones, and iPads will do that very well... If they do it in all.  With most mobile devices, you will need to temporarily disable the WiFI on the device when it is moved from one place to the other, then re - turn on the WiFi at the new location... and the device will usually pick up the signal from the access point closest and strongest.

• How to join a network domain with the controller rt PharLab running?

  I have a PXI system that I would like to be able to access anywhere in the corporate network. Currently, I'm access via the IP address, but want to use the host name instead. Unfortunately, I couldn't find a way to join the network with the controller running PharLab area.

  Any suggestions in this regard would be welcome.

  Respect,

  Česlav

  Hello Bob and Česlav,

  I think Česlav was looking for / ask something different. (please tell me if I'm wrong)

  He really wants to do its PXI RT "look-uppable" via its corporate network without necessarily be on the same subnet (and use the IP address).

  In light of the additional information you (Česlav) provide that I would say again that you contact your IT Department first to see how they prefer it.

  They will generally the method of choice to do this. (both for desktop computers with respect to other devices)

  Sometimes it comes down to add to "add your host name and IP address to a list of DNS.

  The page that you link to is a specific way of Windows, adding yourself to a domain.

  Note that add you to a domain should provide you with the ability to use host names.

  However, he also did other things, which may not be possible or even allowed for other types of devices.

  In most companies you don't even have your desktop admin rights necessary to add your own pc (following this way) to the area, as it may cause a lot of security issues and risks.

  Because I don't really know what the establishment IT is by your side I can't really (with certainty) comment on what you should be able to do (and is not).

• WRT610N v2 - the "Access Restrictions" menu is missing in the administration interface.

  Hello

  I would like to use the features of the WRT610N v2 access restrictions. Unfortunely the menu "Access Restrictions" is missing in the admin GUI. I have all the others: ' Set - up ', 'Wireless', 'Security', storage, Applications and games, Administration, and status.

  I checked the Firmware already and I use the last one that is available on the cisco web site.

  I also noticed that I don't have the 'Cisco's Linksys' text in the upper left as can be read on the user guide, but only "Cisco".

  You have any clues?

  Thank you very much in advance

  Hi thanks for your messages.
  I found that the defender of network domestic in admin-management solved disabling my problem: I now have access to the menu acess restriction.
  Thanks again for your time.

• Recognition of devices with the new firmware on EA3500

  Under devices, I find that my laptop Apple (WIFI connection) and our Dell Desktop (LAN) connection are considered to be the same device.  The operating system shows the EA3500 of this device is the system connections apple IOS and address numbers displayed in this device.  It is therefore impossible to set parental control separately on each computer.  What could I do to get the EA3500 to recognize these separate devices?  I tried to force Apple WIFI network address to another address.  All that happened was the address of device updated on the list of EA3500 devices, but LAN and WIFI addresses remain together in the same device name and MAC OS on the list of devices.

  I have the latest firmware downloaded on my EA3500.  It wasn't a question previously when I ran the old firmware.

  Here is one that I see in the list display the LAN address for the address of Dell and WIFI for Apple on the same devices screen.  When I turn off a device, the respective entry goes.  Only when both computers are turned off reflects the unique device entry on the EA3500 offline.

  Details of the device:

  Name: Macbook Pro laptop

  Manufacturer: Apple

  Model: MacBook

  OPERATING SYSTEM: OS X

  IP (LAN)-1: 10.0.121.119

  MAC address: XX (does not list address voluntarily)

  -2 (wireless) IP address: 10.0.121.109

  MAC address: XX (does not list address voluntarily)

  I couldn't get the a screenshot as assignment would fail.

  This is a bug that comes and goes. Personally, I didn't for a while. But it's still there (even with the latest firmware)... If you catch this bug, it is usually difficult to shake because it can resurface. It affects too EA4500.

  There is no real rhyme or reason why it appears.

  http://community.Linksys.com/T5/wireless-routers/EA6500-multiple-devices-under-one-device/TD-p/57231...

• App, built using the particular OS Version works on devices with the older Version of the OS

  A MIDlet worn and built for OS 4.6 and app will work on devices with lower version, for example, 4.5 or 4.2?

  I am shocked to see the performance on older devices. All this time, all I knew is that when you build an application using a particular version, it will not work on devices with a lower version.

  Good question.

  In fact, it is possible to have the code RIM run 'new level', provided that the APIs used have not been changed.  If they have been modified, they you for punishment.

  In this case, since you use code Midlet, it is unlikely to have changed and so it can work well.  However it is not officially supported.  So compile it using the oldest level of the operating system you want to support.

  In this case, I suspect you will need to download the JDE for compiling back level.

• How do update you the "cloud-copy" of bookmarks in sync-ed, etc. (assuming that 'sync' only allows you to synchronize your device with the cloud

  The machine used for the first set up a sync account seems to provide the cloud 'Captain' at the time of installation. Subsequent operations 'sync now' any device seem to download this cloud 'master' on the devices. But how to update the 'master' cloud and it can be done (transferred to) by the device of your choice?

  Hi Igbortaz,
  This ONLY happens when you join the account the first device. After that, all devices connected to the account synchronization and merge with the stored then replaces the local profile. Unfortunately, at the moment it doesn't have a function to choose the device that is the master.

  And before any changes, I recommend you make a backup of your profile.

• How to connect to _old_ Sync one and only device with the new operating system

  Howdy,

  I own a "device" (laptop) and have used Sync to store my bookmarks and passwords online as a way of not having to worry about backups for these courses of frequent relocations due to the OS-experiences etc.

  Yesterday, my HARD drive crashed hard, so I set up another and a new OS installed (Qubes R2).

  Now costs 32 FireFox that accompanies the installation won't let me not reconnect to my old data synchronization.

  No other devices available (or systems USB - life) with recently synchronized data locally.

  It seems to me strange _VERY_ that due to certain policies to force people to start using an account of FireFox, I must now be deprived of my current Favorites and passwords, even if I _DO_ toxic Apple bite and create an account.

  WTF is the logic here?

  See you soon,.
  Pudsy

  The 'logic' is that Sync has always intended to be used to synchronize several installations of Firefox, never to be used as a 'backup service' as you did. Plus the fact that the transition to the new version of sync with Firefox accounts, started 5 months ago (for users of the Release - version and about a year for pre-release nightly testers).

  You can try to install a version of Firefox 28 [or an earlier version] of Firefox and see if you can connect to synchronize to recover your data.

  I do you, you can upgrade to Firefox 32 and then update your sync account.
  Synchronize your bookmarks Firefox, history, passwords, etc.

• Satellite M40-307: accessibility utility does not work with the limited user account

  Hello everyone,

  I have a Satellite M40-307 (PSM44E), and I had a problem with the utility "accessibility", which displays an icon in the notification bar of Windows XP, to inform the user if the "Fn" key is active or not.

  This utility would not work for the administrator would not worry so much, because the administrator is supposed to know what he does. But the limited user doesn't have access, that bother anymore.

  In Administrator, this utility works quite well. But during a session of limited user, if I try to launch it in [runas / user: admin "C:\Program Files\TOSHIBA\Windows Utilities\TACSPROP.exe"],
  I am replied that the file TCMSVR. DLL is not found. If I launch normally, a message tells me that this utility requires that I am logged on as administrator.

  So, what can I do to use this utility normally, i.e. in a limited user Sessiona? *

  Hello

  Well, you should try to activate the rights for the TACSPROP.exe.
  To do this, you must enter the operating system as an administrator.
  Choose the application, right click. There is a Security tab. Here, you need to activate the permissions for all users.