Access the associated with a MovieClip Timeline Tweens?
I'm trying to create a function to take a snapshot of the State of all objects on the stage for a later restore. It works very well for movieclips, text boxes, etc., but now I hit the tweens and MotionTweens and I'm stumped. These are not created programmatically interpolations, but rather those created on the timeline.
I see that, theoretically, if I could find out if there is a Tween to an object, I could call the position function to know how far along, that's playing, but only if I can find a way to get there from the movieclip, which so far, I'm stumped on.
Is there a simple way to do this?
Thanks in advance,
Eric.
OK, I did a half-assed solution.
It turns out that although interpolation always presents a framework of 1, if you actually put the image labels on, those who is the spokesperson correctly. (Go figure!)
So in my Save function, I inserted mainly:
If (thisNode.currentFrameLabel! == null) {}
xmlChild.frame = thisNode.currentFrameLabel;
} else {}
xmlChild.frame = thisNode.currentFrame;
}
which allows restoring function code, so be it, restore the interpolation as it should.
It must always go back through and check that all manual interpolations are built with picture on each key frame labels, but close enough for now.
Tags: Adobe Animate
Similar Questions
-
To access the variables from a movieclip timeline
Hey everybody!
Normally, I use MovieClip (this.parent) to access a variable that is outside the movieclip I am writing code in. However, this does not work in both functions.
For example:
function editMainText (e:Event) { MovieClip(this.parent).headline.text = "Hello" }
works.
but
function editMainText (e:Event) { function editText (e:Event){ MovieClip(this.parent).headline.text = "Hello" } editText(null); }
does not work
There is probably some small errors in my code, but I need mainly to learn how to change MovieClip (this.parent) to work within the second function.
Thank you!
John
does not work.
In most all cases I've seen, nested functions will stand on their own
function () {} editText
MovieClip (this.parent).headline.text = 'Hello '.
}function editMainText (e: Event) {}
editText();
} -
How can I access the internet with my Apple TV
Is it possible to access the Internet with my Apple TV which I can do with my laptop Smart TV and my Macbook Pro?
Do you mean to display web pages?
If AppleTV 1-3 have thus no such ability / AppleTV 4 does not have this capability built-in, if there is an application of browser for him however, you might be in luck.
-
I'm unable to access the internet with my CV due to the reception of the following - xp Antispyware 2011 alert. How can it be deleted? I have McAfee Total Protection Plus, but which apparently does not work. Help, please.
This problem existed for about a week.Hello
· What is the exact error that you are experiencing?
· How long have you been faced with this problem?
· Remember to make changes to the system?
It seems that your system is infected by a virus or malware. I suggest you to run a scan on the system online to make sure that your system is free from viruses and malware. Click on the link below.
http://OneCare.live.com/site/en-us/default.htm
Also, I suggest you to download and install Microsoft Security Essentials on the system. Click on the link below.
Microsoft Security Essentials
http://www.Microsoft.com/security_essentials/
I suggest install Malicious Software Removal Tool from the link below and then install it on the system and are looking for malware.
Malicious software removal tool
http://www.Microsoft.com/security/PC-Security/Malware-removal.aspx
-
Cannot access the internet with WRT54G hung Hughsnet Satellite HN9000 modem
I tried to configure my router to work with my Hughesnet HN9000 satellite modem WRT54G and my desktop tray. I have a Gateway PC and am using Windows XP. I had worked in the past but came out the router for a few months when my portable wireless is dead. Now, I can not the desktop computer to access the internet with the router in place so I can set it up. The cables are all plugged in right. Cable from the modem to the internet port on the router and the Router 1 port Ethernet cable or 4 for desktop. I cycled all over and outside. I can access the internet fine if I have the modem connected directly to my computer so I know that I have an internet connection. Hughsnet says it's the router. Because it is out of warranty, I can't get any help from Lynksis. I ran the set up disk Lynksis. I suspect that error messages I receive it has something to do with the IP address. But if I can't access the internet how can I do anything with the IP address of the router? I'm not very experienced when it comes to the routers and network settings. Anyone has any comments that could help. I should be able to figure it all out if I can get just the router connected to the internet. . Thank you...
Thanks, I found the problem. The Ehernet cable plug was defective. It would work on the Satellite modem, but not the router because of the localities of diffétent and different stress on the card. Changed the cable and everything works fine now. Thank you.
-
Pavilion dv4: Windows 7 does not start and I can't access the system with f11 recovery
I use a Pavilion dv4. Windows just crashed on a blue screen with a message about physical memory dump. Now when I start the computer it will just a black screen with a blinking cursor to the place when windows normally should start. I can not access the system with the f11 key recovery. I went in with the f2 key diagnostic mode. Diagnostic tests except for the battery test that failed, but shouldn't the laptop to be able to run without a battery if it is connected? And besides, if the problem was the battery, the laptop wouldn't be able to turn on at all, no?
I'm not about to spend all that money on a battery just to know that it is not the battery.
Hello
If you have the 64 bit rescue CD, you would have received an error if it was bad.
Once you have all your data backup, try the following - which means that Windows has been installed on the C Partition.
Boot from the new rescue CD, select repair your computer and choose the command line. When this charge, enter the following commands and press on enter after everyone – including spaces as shown.
Bootrec.exe
bcdedit/export C:\BCD_Backup
c:
Boot CD
BCD attrib s h - r
Ren c:\boot\bcd BCD.old
Bootrec /RebuildBcd
Bootrec /fixmbr
Bootrec /fixboot
Remove the rescue CD and try to restart now.
Kind regards
DP - K
-
Air 1131AG - cannot access the unit with http
I just bought two 1131AG and am not able to access the unit with Internet Explorer.
The two units Gets an IP address from my DHCP server and not to ping requests. Unfortunately, 21, 80, and 443 ports are not open and IPSU Cisco sees not the device either.
The fact that I have two new units that have exactly the same problem makes me think I'm doing something wrong.
I also have access to the consoles.
Thanks in advance.
Based on the number of your room, you have just taken delivery of the Lightweight Access Point. You need to convert the LWAP in standalone (if that is your intention).
Convert a standalone Lightweight Access Point
Click on the link above and the procedure you're looking for is under the heading "Using a TFTP Server to return to a previous version".
Good luck.
Please rate when useful and/or there is. Thank you.
-
I can't access the internet with any browser without proxyfire
I can't access the internet with any browser, without proxyfire software & internet option checked to see if the proxy server is marked or not. I think I checked everything I know now I will be honerd if someone help me with this problem.
Hello
1. have you made changes on the computer before this problem?
2. do you get any error code or error message?
3. what version of Internet Explorer is installed on your computer?
I would suggest trying the following methods and check if it helps.
Method 1:
Run the network troubleshooter, and check.
Using the troubleshooter from network in Windows 7:
http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7
Method 2:
Try the steps in the Microsoft article and check below if the problem persists.
Why can't I connect to the Internet?
http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet
Method 3:
Try the following steps to turn off the Proxy connection and check if it works.
Follow the steps to disable the proxy:
a. open internet explorer.
b. click on tools and then click Internet Options.
c. click on the Connections tab, then click LAN settings.
d. turn off the server to use a Proxy.
e. click on apply then Ok to save the changes.
Hope the information is useful.
-
Hi how to access the tutorial - with the Eagle?
HI - how to access the tutorial - with the Eagle?
It's here: create a video | Adobe first Pro CC tutorials
There is also a newer version here: How to edit videos with Premiere Pro | Adobe first Pro CC tutorials
-
To access the files with the appropriate authorization
Hello everyone. I tried to fix something that I screwed up a long time ago. Here's how it started. I have this drive external DRIVE that I keep my photo archive to. I was going to somewhere that I don't remember now, so I wanted to keep away from curious eyes. So I right click on the main folder and 'share with... '. Nobody ". I applied it to all subfolders and files, etc. So of course when I was there, I couldn't access my files either. He says I don't have permission to access. It's understandable. Then, some time later, my computer crashed and I had to install win7 all over again. That's when I realized that I blocked my own photos in a way. I couldn't access the files without changing the status of property. I've changed the status to everyone instead of specific individuals. I could access the files. OK boring part is almost finished.
Now I can access the files. But under certain conditions. I have recently (4 hours ago) installed win7. I still get the same error always which is the following:[IMG] http://i427.photobucket.com/albums/pp357/DarkTemplar21/5.jpg [line]This is how I see the files/folders[IMG] http://i427.photobucket.com/albums/pp357/DarkTemplar21/1.jpg [line]I have apart from the main folder through Group residential read/write first, then I have to go for the subfolders, select all the files and share them again[IMG] http://i427.photobucket.com/albums/pp357/DarkTemplar21/2.jpg [line]then I result[IMG] http://i427.photobucket.com/albums/pp357/DarkTemplar21/3.jpg [line]When I check the security options in detail, I see a number of unknown accounts as owners.[IMG] http://i427.photobucket.com/albums/pp357/DarkTemplar21/4.jpg [line]I always delete but they keep their appearance or it seems that way.So I solved my problem by going to these steps. But I want also gives access to my files on other computers. I don't want to change owner every time I want to take a look at my photos somewhere else than on my own computer. Is there a way to solve this problem once and for all? or do I have to do this in a routine. It's very tiring to go all folders and share and delete owners etc.Thanks in advance for your help. I promise you that I won't go anywhere near file sharing again.OK, I got it, I changed the owner again at all for the entire disk. now I can access all the files. It really scared me for a minute there. Thank you once again.
-
I created a movie in movie maker xp - how to access the movie with Windows movie maker 7?
I want to access the movie file and continue working on it. Movie Maker (MM) W7 does not open my movie file 1-1/2 years.
I have a new PC with W7 - I also tried to open MM in virtual XP mode. No luck. There is an MM program in XP mode, but it does not open. I was charged correctly MM in XP mode from the internet. Loaded, it does not open.
Is there a way to convert the file MM XP to W7 MM? Much time was spent in a series of films when I was with my old PC with XP and I'm guessing that the XP of MM version now I can't access the files!
Help!
No guarantee but something you could try...
There are two older downloadable versions of Movie Maker
that will run on Windows 7... Maybe one of them would be open
your. MSWMM Movie Maker project file. (you do not have XP
Mode for these)And... you must have copies of 'all' (Photos source files,
Video clips, Audio clips that were in the project). If you are
success by opening the project file... you will see red Xs.Right-click the Xs and navigate to the location where you
saved the source files to restore the path.* Proceed at your own risk *.
(FWIW... it's always a good idea to create a system)
Restore point before installing software or updates)Windows Movie Maker Installer for Windows 7
http://noeld.com/programs.asp?cat=video#wmminstAlso, Movie Maker 2.6 will work on Windows 7:
Windows Movie Maker 2.6
http://www.Microsoft.com/download/en/details.aspx?displaylang=en&id=34
(this is similar to the version of Win XP Movie Maker 2.1)Good luck...
-
To access the befw11s4v4 with active e4200
I have a Motorola modem cable with switch 8 ports, connected on it. I have also E4200 and BEFW11s4v4 connected to the switch. I used BEFW mainly ports to connect my directv box and blu - ray DVD player to the internet in another room. I noticed a very good signal from befw11s4v4. I would like to turn it off or use the wifi b, but I forgot the password to it and I can not install befw11s4v4 with active E4200. (192.168.1.1 is taken by e4200). How can she (befw11s4v4)? I don't want to reset befw11s4v4 because that would make its unsecured wifi. Can I use a laptop computer to install befw11s4v4 and change its IP 192.168.2.1 address, for example, but I would like to power access time (E4200 and befw11s4v4) to my desktop PC. Any advice will be greatly appreciated.
Thanks for your reply. Of course, I couldn't access two gateways with one LAN port on my desktop at the same time. I have connected my laptop to BEFW so I was able to transform the 'b's broadcast, which was not connect in any case. I use my old router BEFW for 'tax' reasons, it works very well with my directv box and blu - ray. Don't want to spend the money immediately on another switch or run another 50 ft. of cable.
-
I can't access the internet with a browser, but I can't...
Ping, tracert, and nsloookup also works. Acrobat Reader was even able to automatic update. I did a clean boot, but still no internet with a browser.
I did several orders (as administrator) command line:
netsh winsock reset catalog
netsh int ipv4 reset reset.log
netsh int ipv6 reset reset.log
I emptied the dns; released and renewed
I also used the System File Checker tool
~ and still I have no internet access with a browser.
I deleted all the programs I have installed around the time that this problem, and I used many tools to help get internet access to a browser, but nothing has worked.
Out of all the home devices that can access the internet, mine is the only one who cannot, both wireless and Ethernet.
My system features:
HP P6230F
AMD Phenom II X 4 810 processor 2.60 GHz
RAM: 8 GB
Windows 7 Home Premium SP 1
It sounds like a problem with DNS resolution for me, easy enough to fix if that's the problem...
John
-
BlackBerry Smartphones not able to access the internet with the new carrier
I use a curve 9220. I was using the Vodafone network. But just shifted to Airtel. I inserted the sim card in the handset. Signals come very well. But I'm unable to access the internet even though I subscribed to a prepaid internet pack. The messege is coming like this:
Navigation via the cellular network is not part of the includedas of your current service plan. To browse the web, you should use the Wi - Fi or contact your service provider to change your service plan.
When went to Airtel site for mobile internet settings, I had something like this:
Your handset does not support live Internet settings. Please refer to the table below to configure the settings manually.
Name of the parameter Account name: Airtel (GPRS) User name: Password: «"" "Home page:»»"» http://live.airtelworld.com Proxy: Activated / no Proxy address and the server: Proxy port and the server: Data carrier: GPRS or packet data Access point name: airtelgprs.com Authentication type: Normal Use preferred access point NO. Please suggest what to do
Only with BlackBerry 10 you can navigate without BIS, with old devices don't.
* Like this post
-
CANNOT ACCESS THE LAN WITH THE EASY VPN CONFIGURATION
Hello
I configured easy vpn server in cisco 1905 SRI using ccp. The router is already configured with zone based firewall. With the help of vpn client I can reach only up to the internal interface of the router, but cannot access the LAN from my company. I need to change any configuration of ZBF since it is configured as "deny everything" from outside to inside? If so that all protocols should I match? Also is there any exemption of NAT for VPN clients? Please help me! Thanks in advance.
Please see my full configuration:
Router #sh run
Building configuration...Current configuration: 8150 bytes
!
! Last modification of the configuration at 05:40:32 UTC Wednesday, July 4, 2012 by
! NVRAM config updated 06:04 UTC Tuesday, July 3, 2012 by
! NVRAM config updated 06:04 UTC Tuesday, July 3, 2012 by
version 15.1
horodateurs service debug datetime msec
Log service timestamps datetime msec
no password encryption service
!
router host name
!
boot-start-marker
boot-end-marker
!
!
Passwords security min-length 6
no set record in buffered memory
enable secret 5 xxxxxxxxxxx
!
AAA new-model
!
!
AAA authentication login default local
AAA authentication login ciscocp_vpn_xauth_ml_1 local
AAA authorization exec default local
AAA authorization ciscocp_vpn_group_ml_1 LAN
!
!
!
!
!
AAA - the id of the joint session
!
!
No ipv6 cef
IP source-route
no ip free-arps
IP cef
!
Xxxxxxxxx name server IP
IP server name yyyyyyyyy
!
Authenticated MultiLink bundle-name Panel
!parameter-map local urlfpolicy TSQ-URL-FILTER type
offshore alert
block-page message "Blocked according to policy"
parameter-card type urlf-glob FACEBOOK
model facebook.com
model *. Facebook.comparameter-card type urlf-glob YOUTUBE
mires of youtube.com
model *. YouTube.comparameter-card type urlf-glob CRICKET
model espncricinfo.com
model *. espncricinfo.comparameter-card type urlf-glob CRICKET1
webcric.com model
model *. webcric.comparameter-card type urlf-glob YAHOO
model *. Yahoo.com
model yapoparameter-card type urlf-glob PERMITTEDSITES
model *.parameter-card type urlf-glob HOTMAIL
model hotmail.com
model *. Hotmail.comCrypto pki token removal timeout default 0
!
Crypto pki trustpoint TP-self-signed-2049533683
enrollment selfsigned
name of the object cn = IOS - Self - signed - certificate - 2049533683
revocation checking no
rsakeypair TP-self-signed-2049533683
!
Crypto pki trustpoint tti
crl revocation checking
!
Crypto pki trustpoint test_trustpoint_config_created_for_sdm
name of the object [email protected] / * /
crl revocation checking
!
!
TP-self-signed-4966226213 crypto pki certificate chain
certificate self-signed 01
3082022B 30820194 02111101 300 D 0609 2A 864886 F70D0101 05050030 A0030201
2 060355 04031326 494F532D 53656 C 66 2 AND 536967 6E65642D 43647274 31312F30
69666963 32303439 35323236 6174652D 3833301E 170 3132 30363232 30363332quit smoking
encryption pki certificate chain tti
for the crypto pki certificate chain test_trustpoint_config_created_for_sdm
license udi pid CISCO1905/K9 sn xxxxxx
licence start-up module c1900 technology-package datak9
username privilege 15 password 0 xxxxx xxxxxxx
!
redundancy
!
!
!
!
!
type of class-card inspect entire tsq-inspection-traffic game
dns protocol game
ftp protocol game
https protocol game
match icmp Protocol
match the imap Protocol
pop3 Protocol game
netshow Protocol game
Protocol shell game
match Protocol realmedia
match rtsp Protocol
smtp Protocol game
sql-net Protocol game
streamworks Protocol game
tftp Protocol game
vdolive Protocol game
tcp protocol match
udp Protocol game
match Protocol l2tp
class-card type match - all BLOCKEDSITES urlfilter
Server-domain urlf-glob FACEBOOK game
Server-domain urlf-glob YOUTUBE game
CRICKET urlf-glob-domain of the server match
game server-domain urlf-glob CRICKET1
game server-domain urlf-glob HOTMAIL
class-map type urlfilter match - all PERMITTEDSITES
Server-domain urlf-glob PERMITTEDSITES match
inspect the class-map match tsq-insp-traffic type
corresponds to the class-map tsq-inspection-traffic
type of class-card inspect correspondence tsq-http
http protocol game
type of class-card inspect all match tsq-icmp
match icmp Protocol
tcp protocol match
udp Protocol game
type of class-card inspect correspondence tsq-invalid-src
game group-access 100
type of class-card inspect correspondence tsq-icmp-access
corresponds to the class-map tsq-icmp
!
!
type of policy-card inspect urlfilter TSQBLOCKEDSITES
class type urlfilter BLOCKEDSITES
Journal
reset
class type urlfilter PERMITTEDSITES
allow
Journal
type of policy-card inspect SELF - AUX-OUT-policy
class type inspect tsq-icmp-access
inspect
class class by default
Pass
policy-card type check IN and OUT - POLICIES
class type inspect tsq-invalid-src
Drop newspaper
class type inspect tsq-http
inspect
service-policy urlfilter TSQBLOCKEDSITES
class type inspect tsq-insp-traffic
inspect
class class by default
drop
policy-card type check OUT IN-POLICY
class class by default
drop
!
area inside security
security of the OUTSIDE area
source of security OUT-OF-IN zone-pair outside the destination inside
type of service-strategy check OUT IN-POLICY
zone-pair IN-to-OUT DOMESTIC destination outside source security
type of service-strategy inspect IN and OUT - POLICIES
security of the FREE-to-OUT source destination free outdoors pair box
type of service-strategy inspect SELF - AUX-OUT-policy
!
Crypto ctcp port 10000
!
crypto ISAKMP policy 1
BA 3des
preshared authentication
Group 2
!
crypto ISAKMP policy 2
Group 2
!
ISAKMP crypto client configuration group vpntunnel
XXXXXXX key
pool SDM_POOL_1
include-local-lan
10 Max-users
ISAKMP crypto ciscocp-ike-profile-1 profile
vpntunnel group identity match
client authentication list ciscocp_vpn_xauth_ml_1
ISAKMP authorization list ciscocp_vpn_group_ml_1
client configuration address respond
virtual-model 1
!
!
Crypto ipsec transform-set TSQ-TRANSFORMATION des-esp esp-md5-hmac
!
Profile of crypto ipsec CiscoCP_Profile1
game of transformation-TRANSFORMATION TSQ
set of isakmp - profile ciscocp-ike-profile-1
!
!
!
!
!
!
the Embedded-Service-Engine0/0 interface
no ip address
response to IP mask
IP directed broadcast to the
Shutdown
!
interface GigabitEthernet0/0
Description LAN INTERFACE-FW-INSIDE
IP 172.17.0.71 255.255.0.0
IP nat inside
IP virtual-reassembly in
security of the inside members area
automatic duplex
automatic speed
!
interface GigabitEthernet0/1
Description WAN-INTERNET-INTERNET-FW-OUTSIDE
IP address xxxxxx yyyyyyy
NAT outside IP
IP virtual-reassembly in
security of the OUTSIDE member area
automatic duplex
automatic speed
!
interface Serial0/0/0
no ip address
response to IP mask
IP directed broadcast to the
Shutdown
no fair queue
2000000 clock frequency
!
type of interface virtual-Template1 tunnel
IP unnumbered GigabitEthernet0/0
ipv4 ipsec tunnel mode
Tunnel CiscoCP_Profile1 ipsec protection profile
!
local IP SDM_POOL_1 172.17.0.11 pool 172.17.0.20
IP forward-Protocol ND
!
no ip address of the http server
local IP http authentication
IP http secure server
!
IP nat inside source list 1 interface GigabitEthernet0/1 overload
IP route 0.0.0.0 0.0.0.0 yyyyyyyyy
IP route 192.168.1.0 255.255.255.0 172.17.0.6
IP route 192.168.4.0 255.255.255.0 172.17.0.6
!
access-list 1 permit 172.17.0.0 0.0.255.255
access-list 100 permit ip 255.255.255.255 host everything
access-list 100 permit ip 127.0.0.0 0.255.255.255 everything
access-list 100 permit ip yyyyyy yyyyyy everything
!
!
!
!
!
!
!
!
control plan
!
!
!
Line con 0
line to 0
line 2
no activation-character
No exec
preferred no transport
transport of entry all
output transport lat pad rlogin lapb - your MOP v120 udptn ssh telnet
StopBits 1
line vty 0 4
transport input ssh rlogin
!
Scheduler allocate 20000 1000
endA few things to change:
(1) pool of IP must be a single subnet, it is not the same subnet as your subnet internal.
(2) your NAT ACL 1 must be changed to ACL extended for you can configure NAT exemption, so if your pool is reconfigured to be 10.10.10.0/24:
access-list 120 deny ip 172.17.0.0 0.0.255.255 10.10.10.0 0.0.0.255
access-list 120 allow ip 172.17.0.0 0.0.255.255 everything
overload of IP nat inside source list 120 interface GigabitEthernet0/1
No inside source list 1 interface GigabitEthernet0/1 ip nat overload
(3) OUT POLICY need to include VPN traffic:
access-list 121 allow ip 10.10.10.0 0.0.0.255 172.17.0.0 0.0.255.255
type of class-card inspect correspondence vpn-access
game group-access 121
policy-card type check OUT IN-POLICY
vpn-access class
inspect
Maybe you are looking for
-
When I run Apple music on my iPhone 6, the start screen displays only the image of the woman with headphones. There is nothing under the logo Apple music... it is quite dark. I can't access anything whatsoever. I check all my settings, and I think
-
Some say there should be a new Sansa firmware update soon? Is it a myth or is there another entry?
-
response to denial of permission access_shared user
My current application has the ability to save the content generated by the user in the documents directory. If the user permission to access the shared files that I would like to delete or disable the 2 Save buttons I. Is there an event after the po
-
Inserts into the company of the IPCC
Hi all At a customer, we will import about 350 skillgroups. I know it's a lot, but that's because that levels of use our solution! To do this, we want to use the insertion tool Skill group in bulk, but are a little concerned about the consequences wi
-
Precision maximum routing attributes
Hi all. I have nticed in the documentation: http://docwiki.Cisco.com/wiki/Precision_Routing_Documentation Add attributes. Click the attributes to add for this agent, up to a maximum of 50. But when I try to add the 11th attribute to the officer, I ge