Access the BIOS on the DV6

Similar Questions

• Access the BIOS

  I'm trying to access the BIOS to change the settings on the function keys, they are locked on the secondary function (brightness, volume, etc.) which is originally havok when using them in programs.

  But I can't get into the BIOS, I have tried F2, F8, F10, F12 and others during the startup, but I can't get this menu boring HP system which only allows the update or restore the BIOS > it makes me crazy.

  I use one

  Dv6-6b14ed

  CPU: i7-2670QM

  OS: Windows 7 64-bit

  RAM: 8 GB

  BIOS: InsydeH20 03.60.48F.01

  Hello

  Try the following.

  Shut down the laptop.  Follow the start-up procedure on the Page 57 of your Interview Guide & Service to remove the RTC battery.  Press and hold power for 30 seconds and then leave the laptop for 10 minutes.  Reinsert the RTC battery, replace covers, etc... and then try to hit f10 when you start Notepad (or try to access it from the start menu).

  Kind regards

  DP - K

• How to access the bios?

  I am trying to install a new OS, how to access the bios on my HP Pavilian dv8?

  Hello:

  You should be able to access the BIOS by pressing the F10 key as soon as you see the HP welcome screen.

  Paul

• How to access the BIOS on a Pavilion Elite e9237c with mouse and keyboard wireless?

  I have a desktop computer Pavilion Elite e9237 with a wireless keyboard and mouse. I tried to access the BIOS by pressing F10 at startup with no luck, and I can't access any of the other menus for the start-up eiither. I don't have a PS/2 port on my computer, so I can't get a wired keyboard and mouse. Does anyone know how to access the BIOS with this configuration?

  I bought a USB keyboard and he answered in the same way... No bios access. I then studied why it did not work and discovered that it was the way in which he has been connected to the computer. I had initially plugged into a USB hub when he was not working and I moved it directly into a USB port and it works! I plugged my keyboard wireless directly into the USB port and it works too! Thanks for your help... I wouldn't have thought of it if it wasn't for to recommend you the USB keyboard.

• Satellite U940 - cannot start or access the BIOS settings

  I try to help with a HARD on a U940 disk failure. The laptop still works a failure has been (almost certainly) the entire HARD disk.

  I have a new HARD drive in place but I'm unable to access BIOS, and the machine does not start of course. Just a black screen while the computer is trying to do something...

  • Then put the F2 on does not work
  • Then put the F12 on does not work
  • Then put the ESC on does not work
  • Out the battery did not work
  • Out the battery and the power cord and the discharge by pressing the power button / stop for 60 seconds, did not work.

  I can't get to the BIOS. In my view, that the machine was based on the Intel hybrid disc stuff using the DDI in RAID before and this quick book has been activated. Of course, I am unable to clean the machine to stop more since I can't start up with the old drive.

  What I really want to do, is to put everything back. Get rid of any RAID stuff and put Windows on the new HARD drive. Any ideas how I can get into the BIOS to move all of the RAID or FastBoot stuff?

  Posted by devondan
  

  I try to help with a HARD on a U940 disk failure. The laptop still works a failure has been (almost certainly) the entire HARD disk.

  I have a new HARD drive in place but I'm unable to access BIOS, and the machine does not start of course. Just a black screen while the computer is trying to do something...

  • Then put the F2 on does not work
  • Then put the F12 on does not work
  • Then put the ESC on does not work
  • Out the battery did not work
  • Out the battery and the power cord and the discharge by pressing the power button / stop for 60 seconds, did not work.

  I can't get to the BIOS. In my view, that the machine was based on the Intel hybrid disc stuff using the DDI in RAID before and this quick book has been activated. Of course, I am unable to clean the machine to stop more since I can't start up with the old drive.

  What I really want to do, is to put everything back. Get rid of any RAID stuff and put Windows on the new HARD drive. Any ideas how I can get into the BIOS to move all of the RAID or FastBoot stuff?

  Is it possible to disable hybrid sleep physically? Remove the CMOS battery? Replace the memory? I can't do it from the software or access the BIOS and I wonder if it is what keeps a clean boot.

• Satellite Pro S500-14Z - how to access the BIOS?

  Hello

  on the Satellite Pro S500-14Z I can´t access the BIOS via F2 and can´t change the bootpriority through F12. By pressing F2 or F12 during startup, the S500 beeps and restarts. When you first start, I had access to the Bios and set the password and active supervisor module TPM. Since I have no access to the BIOS before Windows starts. Is there another key to access bios (I tried ESC, DEL, F1, INS) or how can I change the pw supervisor (I know my real password!) and disable the TPM?

  Thank you
  Karl

  Hi karlS_1,

  Normally you can access the BIOS if you press F2 before Windows starts. It works with an external keyboard?

  You can change some settings in the BIOS using Toshiba HWsetup. This tool is preinstalled on your laptop and you can change the order of boot with this tool.

• Qosmio G30-126 - how to access the bios!

  I have a laptop Qosmio G30-126 and I don't know the key to enter the bios to change real estate for the HARD drive or something... then how to access the bios? What is the key for the bios?

  Hello

  Try pressing the F2 key by turning on the device.
  The Toshiba notebooks supported the ESC and then F1 button
  If these two options are possible

• HDX18: Cannot access the BIOS with F10

  Try to access my BIOS to set the boot on USB device sequence. Can't!

  Power and press F10 repeatedly does not bring me in the config of the BIOS beeps fair to me when my keyboard buffer is full and then continues in charge of the operating system.

  Never see option to press the keys to access BIOS either.

  Thanks for trying to help out.

  My system is a laptop from earlier versions of Windows 8 (2010) and MUST have posted the option to enter in the configuration at the start, but didn't. I had previously improved OS 32 bit to 64 bit - who created another folder Program Files, which in turn have brought masses of disk space. I then upgraded to Windows 10 and did not like the slow, he ran then, I wanted to install a clean Windows 10 and created a bootable USB device. That's when I found I couldn't access the BIOS to change my boot device.

  After trying everything I could find without success, I started the machine and once Windows has loaded, I pressed the SHIFT key and select restart. This brought me to the screen Menu UEFI. I went to watch each of the options - no led me across a good kind, I moved back to the main menu screen and clicked on continue - go out and continue to load Windows.

  After getting a black screen, I can FINALLY see the option - press ESC to enter Setup... Hooray!
  
  Problem solved - for now!

• Cannot access the Setup of the BIOS on my Satellite C660-24F

  I can't access my computer laptop Bios Setup - when I pres F2, F11 or F12

  * Satellite C660-24F PSC1NE *.

  He only statup Windows can't access the BIOS boot menu. I looked BIOS updat for my Satalite C660-24F - PSC1NE model - and I have not found on this web site.

  Can someone help me please?

  Have you changed the settings in BIOS?
  You may have turned on option quick start?

  Please do not forget that do you close regular. Also test F8 option.

• Re: How to access the BIOS on Satellite Pro A120

  Can someone tell me how to access the BIOS on my SAT Pro A120?

  Hello

  You must press ESC and then F1 key immediately after the laptop has been powered!

  The laptop seems to be to use the Toshiba BIOS and ESC key should be the right one!

  Good bye

• How to access the configuration of the BIOS on Satellite L850 / 00Q?

  I spent hours trying many things to get into the BIOS. It gives no message at startup telling how to enter the BIOS.

  All my other laptops I've owned have not been such a mission to enter the BIOS setup.

  I agree
  By pressing F2 at the beginning of the boot order should allow you to access the BIOS

• Cannot access the BIOS on the Satellite L40T-A202

  Hello!

  Months ago, I've updated the bios of my laptop Toshiba L40T-A202. After reboot I can't access the bios. I fixed it by jumping the jcmos into the mobo. Now the problem occurrd again and I can't seem to fix it with the same problem I did.

  Can someone help me? This laptop was bought abroad and I don't want to spend a lot of cash and send it to the repair shops.

  Please help me on this.

  > I fixed it by jumping the jcmos into the mobo
  With this action, you certainly killed the guarantee. I really don't understand what was the reason for this action.

  For a better understanding, I have a few questions for you:
  Have you successfully updated the BIOS?
  You can start your machine properly?
  See Toshiba welcome screen on startup?
  Windows starts as usual?

• Cannot access the BIOS on my Satellite U940-11 t

  Hello

  I have a problem with my computer.
  I installed a dual-boot Ubuntu/Windows 8.
  I disabled the UEFI mode in order to install Ubuntu. But now I have more access to Windows, and I can't go into the BIOS menu to activate the UEFI.

  I tried all possible combinations (F2, ESC, F12, F10, F8, DEL,...) and none of them opens the menu of the BIOS.

  I read on a forum that if I put my battery, it will work, but it didn't.

  How can I access the BIOS? Is there a secret combination that I have not yet tried?

  Thanks for your help.

  The F2 key is the right one to access the BIOS.
  Try this method:
  Press F2, and then press the power button to power the unit in place.

  By the way: Windows 8 and 8.1 Win requires the permit secure boot and UEFI boot mode.

• Satellite 2410-304 s - how to access the BIOS?

  Hello!!
  I need to access the BIOS of my computer. It is of a Satellite 2410 304 s. I tried with ESC then F1 but I can not adhered.

  Thank you for all

  Hello!

  Normally, you can access the BIOS using the ESC key at the beginning upward.

  I had Satellite 2410 too and I was able to access BIOS by pressing ESC. You must press on immediately after power on the laptop.

  Check it!

• How to access the BIOS on Portege ct 3010

  I have a ct Portege 3010.
  When I had, it had Windows 98 installed on it, but I wanted to put Linux on it, so I could learn that.

  So I tried to get into the Bios to boot from my CD but could not get into the Bios or really do anything. Thus, in a final attempt, I reformatted the hard drive.

  Now, I can't not in what either.
  Can anyone help?

  I tried every button I thought me could get into the Bios and even tried to hit all, no one can seem to hit me.

  Hello

  To access the BIOS, you must use and press ESC immediately after that Portege was the power upward.

  But if I understand you right, you want to boot from the internal CD/DVD drive.

  Well, you can also try to press the C key.
  This would allow the start-up of the STRANGE.

  On the other hand, pressing F12 button would you used to activate the start on-screen menu.
  Then, choose the CD/DVD drive to boot from the CD-ROM.

  Check it out