Access to a virtual computer within a NAT configuration on the network

Similar Questions

• OfficeJet Pro 8500: Officejet Pro 8500 A910 - unable to access configuration for the network folder screen.

  I can't access my webpage "network folder Setup.

  I can access my page main printer very well using the IP of the printer.   I click on Scan up fine, I then click on "configuration of the network folder" and it tries to load and then goes to a screen "ERR_CONNECTION_TIMED_OUT".

  He warned me the first time that he has been using HTTPS and I approved that.  I currently records on my printer set up awhile back and they work fine but must modify and add a little more.

  I tried multiple computers and devices with the same results.

  Thank you

  Chris Gaines

  MALVERN, AR

  Hello @Cgaines78,

  Thanks for dropping by the HP's Support Forums! I see that you run into issues trying to set up a folder network for your HP Officejet 8500 A910.

  Please continue troubleshooting here: scan to a computer, the e-mail, the device memory or the network folder

  This aid? You are now able to set up a network folder?

  Let me know the results. If this resolves the problem please let others know to mark this message as "accept as Solution".  Just say thank you, please click the ' Thumbs Up ' button. If you need more assistance let me know and I will gladly do whatever I can to help.

• Network on the virtual computer is not updated after changing the image or

  Hi all

  I encountered a weird problem with one of the pictures gold.

  What I did:

  1 remove Image network adapter gold

  2. addition of new network card and the new network in the annex

  3. power on the Image or

  have 4 you communicated an ipconfig/renew

  5. check that it is in fact now pulling an IP from the new network

  6. picture power off gold

  7 snapshot

  Now after you apply the new snapshot with the new network adapter to the pool and do a recomposition, still have all VM the old network attached to it.

  What Miss me?

  Thank you

  I think that what is expected - after you create a linked clone, its network settings are retained through operations of discount/redial. To view documents:

  "In the View Composer recomposing and rebalance operations, a best effort is made to ensure that the label of each card network NETWORK attached to each workstation linked clone is kept when a clone related new NICs inherits a new base image. View retains the label of network with a NETWORK card that was in place before the operation to reconstruct or rebalancing as the new base image has an available NIC configured with the same type of network switch. (A NETWORK adapter can be configured with a standard network or distributed virtual network switch switch.) »

• How to set up/configuration of the network on virtual servers?

  We just bought the license for vSphere with two processors. I will put up at least three virtual servers on that host computer. Can someone point me to an instruction step by step on how to set up the network so that each guest operating system will have their own unique IP address and/or MAC address? The server is an HP Proliant DL380 G7 with two NIC standard more map of the ILO.

  Any suggestion is appreciated.

  MAC address of the virtual machine is generated by ESXi host when you first power on the virtual machine and the IP address will be assigned by an existing DHCP server or you can configure it manually. Regardless of the implementation of a server as a virtual or physical machine, you generally EF static IP settings to a server system.

  André

• How to reformat a computer that was previously connected to the network?

  original title: change the network to stand alone

  We acquire some computers that were on a network: the network no longer exists and we want to use in the State current alones. We have we anything apart from Windows and Office CD that we have, that is all the drivers because they were thought to be on the server.  Any help would be appreciated

  Simply reinstall Windows and Office from the CD you have.  The fact that they used to be on a network does not come into play.  Once installed, you can go to windowsupdate.microsoft.com to install updates that are necessary for your computer or see the website of the manufacturer for updated drivers.

  HTH,
  JW

• The computer seems to be configured correctly, the device or resource (DNS server) does not

  When I tried to fix this using other threads, none worked any other suggestions?

  Original title: your computer seems to be configured correctly, but the device or resource (DNS server) is not responding. I tried all of the solutions none works

  Hello

   
  
  This problem is limited to a specific Web site or with everyone?
   

  You can approach this problem in two ways: first by simply disabling the cache, but also by restarting DNS client service, which manages the cached DNS queries.

  
   
  Method 1: Clear DNS Cache

  a. click Startand type cmd in the Start search box.

  b. right click on cmd in the list programs, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type your password or click on continue.

  c. at the command prompt, type the following line and press ENTER:

  ipconfig/flushdns

  Usually, it clears up any issue that may occur.

  
   
  Method 2: Restart the Service DNS Services

  a. Click Start and run, type services.msc, and then click OK.

  b. double-click the DNS Client service. If you receive a Configuration Manager message, click OK.

  c. in the Startup Type list, click on restart and then click OK.

  d. close Services.
  
  e. restart the computer.

  
   
  Method 3: Configure the connection to obtain an IP address automatically

  a. click on 'Start', enter "NCPA. CPL' (without the quotes) in the search bar and press "Enter."

  b. right-click on the network connection, and then click on 'Properties'. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  c. click on select 'Internet Version 6 (TCP/IPv6) Protocol' and then click 'Properties' of .
  
  d. Select "obtain an IP automatically" and "DNS server automatically get an address.

  e. click 'OK'.

  f. highlight "Protocol Version 4 (TCP/IPv4) Internet" and click on "Properties". "" "

  g. Select "obtain an IP automatically" and "DNS server automatically get an address.

  h. click on 'OK'.

  i. restart the computer.

  See also:

  Why I can't connect to the Internet? http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

• NAT subnet in the network object group

  Can someone help me please? I'm rusty with VPN and Natting.

  Scenario: I need to share my internal-tunnel network. Traffic to 192.168.88.0/24 192.168.0.0/24 NAT when establishing a VPN connection for the objects that I defined in one group of objects specific network (Group1Servers). Internet traffic does not get this NAT 88, even by default.

  ASA5506-X, 7.5 ASDM, ASA 9.5

  Hello

  You can configure a static strategy of nat to translate 192.168.0.0/24 to 192.168.88.0/24 when the destination is Group1Servers, the CLI command:

  Create objects for 192.168.0.0/24 and 192.168.88.0/24

  network object obj - 192.168.0.0
  192.168.0.0 subnet 255.255.255.0

  network object obj - 192.168.88.0
  192.168.88.0 subnet 255.255.255.0

  Statement by NAT:

  NAT obj destination - source (indoor, outdoor) 192.168.88.0 obj - 192.168.0.0 static static Group1Servers Group1Servers

  You can view this documentation to setup NAT:

  https://supportforums.Cisco.com/document/33921/ASA-pre-83-83-NAT-CONFIGU...

  Given that this traffic goes through a tunnel of site to site do not forget interesting traffic must be configured with the translated '192.168.88.0/24' not the real network, which is a common error just keep in mind

  Best regards, please rate.

• Virtual WiFi not presentation, it disappears from the network and sharing Center.

  Original title: Virtual WiFi not presentation

  Hello

  I created Virtual Wi Fi cmd (netsh wlan), first it was created and posted his icon in the network and sharing Center, after that show how I disabled it from the network and sharing Center by clicking on the icon and pressing the button disable I pressed off it disappear from the network and sharing Center.

  Can someone help how to activate it so that I see her back icon in network and sharing Center.

  Thank you

  Hello

  You have virtual map of Wi - Fi enabled in Device Manager?

  This problem may occur if network settings are changed.

  You try to run the following command check if it helps.

  a. press on the key Windows + X.

  b. click on (Admin) command prompt.

  c. type the command netsh wlan start hostednetwork and press on Enter.

  If the problem persists, I recommend posting your query in the TechNet Forums to get help:

  8.1 Windows networking forums

  Let us know if you need help with Windows related issues. We will be happy to help you.

• Script to create multiple virtual machines model works is not for the network adapter variable

  We are working on a script to create multiple virtual machines from a template. The script works fine, but when we try to include commands to set the NIC to a group of specific ports on a dvswitch script errors on. Here's what we have so far. This script (less network variables) works, but we would like to include the network configs in the script as well.

  -------------------

  This is the part of the script that configures the network/dvswitch adapter... but does not work properly.

  $myResourcePool = get-ResourcePool-name DQOL

  $dsName = get-Datastore-name "DQOL-DS01.

  $myTemplate = get-Template-name "DQVTemplate".

  $distributedSwitchPortGroup = get-VirtualSwitch-distributed - name "CVE-dvS04-Nexus - k 5 | Get-VirtualPortGroup-name '979-DQ-SHARED '.

  New-VM-name MyVM1-model $myTemplate - Networkname ResourcePool - $myResourcePool - OSCustomizationSpec $mySpecification $distributedSwitchPortGroup - Datastore

  (Get-$dsName data store)

  New-VM-name MyVM2-model $myTemplate - ResourcePool $myResourcePool - OSCustomizationSpec $mySpecification - Datastore (Get-$dsName data store)

  _____________________

  !!!!!!!  This part works, but without specifying a network/dvswitch... card!

  $myResourcePool = get-ResourcePool-name DQOL

  $dsName = get-Datastore-name "CVE-SAN-ISG-DS02-02ef.

  $myTemplate = get-Template-name "DQVTemplate".

  New-VM-name MyVM3-model $myTemplate - ResourcePool $myResourcePool - OSCustomizationSpec $mySpecification - Datastore (Get-$dsName data store)

  New-VM-name MyVM4-model $myTemplate - ResourcePool $myResourcePool - OSCustomizationSpec $mySpecification - Datastore (Get-$dsName data store)

  Here is the error we get:

  New-VM: all parameters can be resolved by using the specified named parameters.

  C:\Users\capuanoj\Desktop\Create-multiplevms-fromtemplate.ps1:6 char: 7

  + New-VM < < < <-name MyVM1-model $myTemplate - Networkname $distributedSwitchPortGroup - ResourcePool

  ePool - OSCustomizationSpec $mySpecification - Datastore (Get-$dsName data store)

  + CategoryInfo: InvalidArgument: (:)) [new-VM], ParameterBindingException)

  + FullyQualifiedErrorId: AmbiguousParameterSet, VMware.VimAutomation.ViCore.Cmdlets.Commands.NewVM

  You cannot use the - model and Networkname - parameters of the cmdlet New - VM in a single order, because both are in different parameter sets. You must first create the virtual machine and then use the cmdlet Set-NetworkAdapter to change the portgroup of the virtual machine. As in example 4, assistance from cmdlet Set-NIC:

  --------------  Example 4 --------------

  C:\PS>$myNetworkAdapters = Get - VM | Get-NetworkAdapter-name "NIC 1.
  $myVDPortGroup = get-VDPortgroup-name MyVDPortGroup
  Together-NetworkAdapter NetworkAdapter - $myNetworkAdapters - $myVDPortGroup Portgroup

  Retrieves all network named "NIC 1" cards of all virtual machines and connects to the specified distributed port group.

• Backups of data to virtual computer within a cluster recovery

  Hi all

  I have a VM cluster with two hosts on the inside (Server1 and Server2) and each host has its own data store.

  VM data recovery will run on one of these hosts (Server1).

  I know that it is possible to store the backups on the local storage of the host (storage of Server1) or on a storage shared (NFS partition), but Is it is also possible to backup on the data store of the host of the second pole (Server2 storage)?

  Thank you

  Antoine

  Antoine,

  Hope I understood that question you correctly, if your device data recovery work on server1, the device will be storage in shared access and local storage of server1 only and will not be able to access the local storage of server2.

  -vCloud9

• Help to get a file from the host to the virtual computer within the workstation

  Hello

  I need help with a script in the guest operating system (this is through workstation).

  Workstation will not see the USB drive (driver error), or the CD rom.   I can't mount the CDROM because he said/dev/cdrom is not a valid block device (I have modified/etc/fstab) and I tried everything listed here http://www.computing.net/answers/linux/cdrom-not-a-valid-block-device/6331.html

  I also tried to copy the script in the guest OS using vmrun

  C:\Users\rodelane\Desktop > vmrun t ws - gu root gp - password copyFileFromHostT

  oGuest "C:\Users\rodelane\Desktop\vm_discovery.pl" / tmp/vm

  Error: Invalid file names

  Any help or advice are appreciated

  I think you'll have better luck poster this problem on the forum of vCenter. VIX is not involved in the activation of vCenter.

• Question ESXi 5.5 with turn a virtual computer: "an error was received from the ESX host turning on VM" '22 (Invalid argument)"'DiskEarly on a power Module failed.'

  Here's what happens when you try to turn it on one of my virtual machines (see also accessories):

  Error stack:

  An error was received from the ESX host turning on VM vzilla-ws2012r2e.

  Unable to start the virtual machine.

  Cannot open disk ' / vmfs/volumes/51286ca4-ef967828-664d-001b2129ad71/vzilla-ws2012r2e/vzilla-ws2012r2e_3.vmdk ' or one of the snapshot disks it depends on.

  22 (invalid argument)

  Power DiskEarly module has failed.

  Cannot open disk ' / vmfs/volumes/51286ca4-ef967828-664d-001b2129ad71/vzilla-ws2012r2e/vzilla-ws2012r2e_4.vmdk ' or one of the snapshot disks it depends on.

  22 (invalid argument)

  This circumstance may be linked to a sata cable issue, with the possibility of temporary loss of connectivity, which could result in data loss/corruption, I realize.  It is a laboratory box.  Especially say that the 2 VMDK he complains (trying to light) is both on the grounds of a single physical disk. Data, read and written to the speaker, since the problem are very good (which indicates the wiring problem was resolved, and the VMFS5 file system seems to be in good health).

  No photos.  No related clones.  Just a 2012 Windows Server based VM, with several drive letters in, with those underlying files VMDK residing on different stores of data VMFS5.  Implemented end (these drives aren't really so huge), but far from running out of physical space for the data either. Everything is working great for months, until today, trying to it turns on again.

  You are looking for:

  "Failure error disk beginning module lit" results in this article:

  error disk on start module failed

  which indicates the .lck files may be present.  It does not exist.

  Then upwards, of a variety of other items:

  Re: Unable to start the virtual machine: invalid argument on *-flat.vmdk

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1004232

  https://communities.VMware.com/message/search.jspa?peopleEnabled=true & userid = & ContainerType = & Container = & q = module + DiskEar...

  error disk on start module failed

  but alas, none of them seem to relate directly, or exactly.  My vmware.log file is attached below, as well as some screenshots of to show the structure of the unity of this virtual machine.  Hoping that this post proves fruitful, if anyone has had a similar situation.  The data at stake here are (mostly) redundant, but I would rather understand my way of it, in the case where it happens to me again, or can help others.  Many preferred rather than give up, reformat the VMFS and start again.

  Thank you!

  Good news, the best result I could hope. No data is lost. No corruption of the VMFS or NTFS don't drive in the virtual machine. Nice!  Saved me a few terabytes of data restoration and learned a little more on file system of troubleshooting along the way.

  It took a technician of VMware Service excellent, attentive, methodical remote 2 hours in a WebEx previously to resolve problems with these 2 files vmdk manually, because he found that there is a lock on them. I opened a request of Service (SR) # with VMware by following the instructions here:

  VMware KB: Cannot access certain files on a VMFS datastore

  To resolve this problem, apply for support from VMware Support and note this ID (1012036) Knowledge Base article in the description of the problem. For more information on the filing of a request for support, see How to submit a support request.

  I'll cover this saga and the exact process for collecting and downloading of newspapers, through to my TinkerTry.com, including the ride video.  I even captured much of the technical work that has been done. That said, it is true that little of the magic that was made to resurrect the metadata will remain a mystery, given that this piece is VMware.

  I'm ok with a bit of black box, considering how I'm happy that I got all my data, and time savings that the quick recovery represented.

  By clicking on the button "answer".

• Impossible to access Windows 8 Apps store... connection problem or the network server.

  Have you tried all the suggestions that covered this problem and then some but I can't upgrade to 8.1 windows

  Would like to than anything to help solve this problem. I am very patient and willing to address the issue in a methodical way.

  Where is the best place to start?

  Hi Bob,

  1. What are the steps you tried to solve the problem?

  2. what happens when you access Windows Store? What is the exact full error message?

  3. which antivirus program is installed on the computer?

  I suggest to update the content in the store, and check for the issue.

  Method 1: To refresh the content in the store

  a. type in the right edge of the screen, and then click search.
  (If you use a mouse, point to the upper right of the screen, move the pointer of the mouse down and then click Find.)
  b. Enter run in the search box and then press or click Run.
  c. wsreset.exe enter the command run and then press or click OK.
  d. restart your PC
  e. on the start screen, tap or click on Store and check to see if Windows 8.1 now appears on the store home screen.

  Method 2:

  If you use a proxy connection, then try to disable the proxy, then check if the problem persists.

  Follow the steps to disable the proxy:

  a. open Internet Explorer

  b. click on the Tools buttonand then click on Internet Options

  c. click the Connections taband click LAN settings

  d. uncheck it Server Proxy use.

  e. click on apply then Ok to save the changes.

  Now, check if you can access Windows Store.

  If the problem persists, you can read this article on how to get the update on the store.

  Why I can't update in the store?

  http://Windows.Microsoft.com/en-in/Windows-8/why-can-t-find-update-store

  Hope this information helps. Response with status so that we can help you.

• Restrict access of a user AD to a specific folder on the network

  I have a Windows 2008 R2 and Windows 7 users.

  I have a group in my ad called "Finance".

  I have a folder on the server C:\fileserver\department\finance\

  All users in the group above are mapped to the C:\fileserver\department\finance\

  In the C:\fileserver\department\finance\ folder there is a folder called payroll.

  A new employee (finance) started working today.  I created his profile in AD under the Finance group.  But his boss told me that it cannot access the pay record (a little).

  Where can I go and block access to this new user to access the payroll folder? I have no idea.

  Thank you very much

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Activate Windows XP on a computer that is not connected to the network

  I have a machine that is not connected and I have to activate the XP software.  It is supposed to be a phone number on the activation window that appears, but there is not - does anyone know what number to call to get this activated machine before it expires?  Any help is appreciated.

  This Help article How to activate Windows XP and Microsoft Help support?

  How do to activate Windows XP by phone to contact a Microsoft customer service representative to activate Windows by phone, follow these steps:

  1. Click Start , point to programs , point to Accessories , point to System Tools and then click Activate Windows .

     Or, click on the Activation of Windows icon in the notification area

  2. Click on Yes, I want to telephone a customer the service representative to active windows now .
  3. Click read the Windows Product Activation privacy statement , click new , and then click Next .
  4. Follow the steps in the Activate Windows by phone dialog box, and then click Next .

     Note The number appears now and differs based on the location you select.

  5. When activation is completed and you receive the following message appears, click OK .
     You have activated your copy of Windows.