Access to Android MIC problem
I read the micro class, and I can't understand why this code does not draw anything:
var mic:Microphone = Microphone.getMicrophone ();
MIC.gain = 100;
MIC.rate = 44;
mic.setSilenceLevel (0, 6000);
mic.addEventListener (SampleDataEvent.SAMPLE_DATA, micSampleDataHandler);
private void micSampleDataHandler(event:SampleDataEvent):void {}
log ("Recording");
}
According to the adobe help files that it is alls that is necessary to actually speak into the microphone and do know that you do. But I can't micSampleDataHandler to fire all whispering, talk or scream into the phone.
Am I missing something?
On Android, you must set the permission to RECORD_AUDIO to access the microphone.
Tags: Adobe AIR
Similar Questions
-
I had a problem when a group of friends sends SMS and I do not get them from one of the individuals in the group. This group consists of 3 iPhones and Android 1. I know issues when people spend to have an iPhone and then go to an Android but forget to take of iMessage, but it is not part of the case. We all had the same type (iPhone and Androids) for a very long time who have nobody in this group never cross the line and changing. This question has been which is rampant in us for a long time.
User - iPhone
User B - iPhone
User C - iPhone
User D - Android
User A sends the text that everyone always sees.
User B replies, everyone sees
User C responds, everyone EXCEPT the user sees A
User D answers, everyone sees
The user responds, everyone sees
The user never sees any response user D sends. The user has, B, and C can send each other text without any problem in a group of different text (removing D user) and all is well. The user A and user D can text each other and all is well. User A has other groups text mixed with iPhones and androids that causes no problems. any help is greatly appreciated.
A group that contains a non - iOS device is a MMS. It has nothing to do with iMessage. A multimedia Message, as an SMS is a function of carrier. There are no settings for SMS on the iPhone, but there is a setting for MMS messaging and Group Messaging. These two must be on for these to work. If the user does not receive messages from the user D, then the user must check with the carrier so that they have a SMS/MMS profile on their account, based on the description you provide.
-
Time machine is unable to perform a backup. Not able to access the sparsebundle. First of all, there is problem with the Snow Leopard operating system. Dragon followed in the upgrade to El Capitan. Only difference was error code 109 changed to 'null '. What about someone?
We need some info.
You can access from the finder Time Capsule? If this isn't the case, then Time Machine will not work.
You upgrade the computer snow to El Capo and keep the same name?
If you want to backup, it is best to start again... clean the new backup any attempt to add a previous backup failed.
I recommend that you actually erase the TC... do a complete factory reset and start again.
The previous backup if necessary can be archived on a USB drive connected to the TC assuming that Airport utility can still access it. Airport utility accesses the TC?
With update installs all sorts of things can go wrong... so tell me more if you can not get anywhere.
-
Performance on the Web access and the certificate problem arises
Hello! I just bought a HP pro 8610 office jet and I'm trying to access the Scan function to access Web but performance is very slow and I just get a blank screen, no certificate appears. I tried to do it in Chrome and Firefox. Otherwise, the printer works fine.
I accidentally entered a wrong email as beneficiaries on the address book and need to delete an entry via the Scan option in the Web.
I'm on Windows 7 Edition home premium.
Please advise, thank you!
This has been resolved! Apparently the connection was slow for some reason any. Just tried again this morning and the certificate that is presented and not more problems. Thank you!
-
In MS access throught labview connection problem
Hello
I use MS Access 2010 and 2012 of Labview. When I'm under vi of Create table and insert a column, but I get a repetitive mistake that is shown in the images.
Please help me solve this problem.
If the memories are good, you must have the names of column in parentheses if you use spaces [DUT] [document Test/result] and so on.
/Y
-
Microsoft Access with ActiveX control problems
I did a bit of research on this topic and have found several answers that are nearby, but do not address my real problem.
I would use ActiveX control Microsoft Access, especially to create new database files without having to copy an empty file that I've stored somewhere I also can't stand it when I don't get something to work, so it's now something personal also.
Anyway, when I run a simple VI to open the reference can be created, Access._Application, I get the error: "error 3005 occurred at the opening of the Automation: object specified is not can be created in Access.vi. I have tried many of the common responses to this problem, such as navigation for the library in ActiveX window and try to save it with regsvr32, but the file is msacc.olb, which cannot be registered with regsvr32.exe. I have attached the original VI and I tried on 3 different PCs, all with slightly different installs of Office, but with Access 2007. If anyone can help me understand this point, I would be very happy.
Thank you
Your vi made the same error on my machine. Then, I removed the Access._Application reference, click right on the reference entry and chose to create a control. Then I changed the Active-X class by accessing my version of reference computers ("Access._Application.12"). The same vi took place without error.
The class is still shows as Access._Application, which indicates that there may be an incompatibility which is not visible.
When and activeX node does not work when copied from any other machine, it is recommended to replace each node that is generating the error and reselect the properties and methods.
-
Is the phone call received requesting remote access to solve the problem under Windows a scam?
I received a phone call requesting remote access to my computer to solve a problem with Microsoft Windows more precisely line X 5. The call came from Salt Lake City Utah, phone number 801-839-2099.
I got this phone call once a week.
Is it a scam?
It's a scam. Next time you receive such a call, tell the caller you declare calls to the police as harassment for fraudulent purposes... maybe they'll leave the call.
http://www.Microsoft.com/security/online-privacy/msName.aspx
http://www.Microsoft.com/security/online-privacy/phishing-scams.aspx
http://www.Microsoft.com/security/online-privacy/avoid-phone-scams.aspx
-
Access to Windows Explorer problem
I have Windows Vista and yesterday after downloading a text file of my bank on my computer, I have been unable to launch Windows Explorer or my control panel, etc. I access programs such as Excel and access files via Excel. I get the error message is "Windows Explorer has stopped working".
Hello
I suggest you to try the steps below and check if they help to resolve the issue.
Step 1:
Try to start your system in safe mode and check if you are able to open Windows Explorer without any problem.
To start in safe mode, see the link below.
http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode
Step 2:
If you can able to open Windows Explorer in safemode, I suggest that you perform a clean boot in normal mode and check if the problem persists.
Follow the steps mentioned in the article below.
How to configure Windows Vista to start in a "clean boot":
http://support.Microsoft.com/kb/929135
Note:
Once the troubleshooting completed, reset the computer to start as usual.
Hope this information is useful.
-
I did a port to android app it job well but... Aspect of the Arabic language is not good, as each letter is separated
Please someone help to overcome this problem
Thank you
Hesham Magdy
Gingerbread AOSPS Arab support is incomplete. It is much better supported to Jellybean.
It is a big complaint that we get, and this is another reason why we will modernize the runtime.
-
Hello, I have a desktop PC and a laptop (DELL Inspiron N-4050).
I have problem with my internet connection cable which is working fine on my PC, but does not not on my laptop giving an error "no access to the network.When I troubleshoot it says "your computer seems to be correctly configured but the device or resource (DNS SERVER) is not responding."
I said to many technicians of microsoft online response, but they could not solve my problem and said this is my DNS problem and advised me to contact my Internet service provider. Guess it's because of my internet so why it works on my PC not on laptop?Yesterday, my ethernet cable pulled out my cell phone and I couldn't connect to the internet more. But on my desktop PC, it works perfectly fine. (I do not use wifi, if this information is also required) I have studied several threads with similar situations, and I have tried different methods to solve the problem to no avail. I did a system restore, but I'm having no luck. Also, I did not of the latest changes with my anti virus software and my LAN card drivers look to date.
When I remove my cable from the laptop and again connect my cable then it works but only after the PC sat for awhile.
1.I did flush DNS by typing "ipconfig/flushdns" in the command prompt.
2. my IP address, DNS, subnet mask etc are set to automatic.
3.I also added physical address taken from command line giving "ipconfig/all". for the properties of the network driver settings.
4.I ' installed the drivers to date of 2014 on my laptop.
5.I did a lot of searching the web, but they do not solve my problem.Please help me to solve it.
I appreciate your help.
Thank you.Hello Hall,
Please keep us updated on the status of the issue.
I suggest you to follow the steps in this Microsoft article troubleshooting and check if it helps:
Error message "your computer seems to be configured correctly, but the device or resource (DNS server) is not responding" in Windows 7
http://support.Microsoft.com/kb/2779064/en-us
Hope the helps of information.
Please reply with the results, in order to help you solve the problem.
Thank you
-
The tools of command line for applications Android download problem
Hello
I can't download 'Tools of command line for Android applications' Web of BlackBerry site. When I click on the blue download button with label 'Tools command line for Android applications' in the Tools section, browser updates the website tools and nothing more.
ARO
Maciek
Hi again,
Problem solved. A few hours later, I downloaded tools successfully.
ARO
Maciek
-
VPN access with VPN client problem. Help, please
I have a PIX 520 as VPN tunnels endpoint device. I was able to establish an IPsec connection. I checked that I have gave me an address in the IP pool that I set up but I can't to any resource on the internal network. I could only ping myself. When I run ' ipconfig/all' I see my address on the correct vpn with DNS interface, but my front door is set to my own address. I think that's the problem. Please help me solve this problem. Let me know if you need more information.
Here are some suggestions you might try to get this working:
1.) change your "taken" to access-list. The lines are no longer supported by Cisco even if they still work. This will help you in debugging your access list because there will be some hitcounts.
There is a tool from cisco for conduits of concert on access lists:
http://www.Cisco.com/cgi-bin/tablebuild.pl/PIX?sort=release
Download the: occ - 121.zip
PIX Firewall Outbound leads binary converter for Windows, version 1.2.1
2.) change your pool of VPN.
IP local pool techvpn 10.x.x.100 - 10.x.x.120
With this, it's already you have a 10.x.x.x subnet in your internal network. The ip pool automatically assigns a 255.0.0.0 for the VPN Clients subnet mask. This may cause routing problems. You can use a subnet used anywhere 172.16.100.x.
example:
No vpngroup address techvpn pool lsdvpn
no ip local pool techvpn
IP local pool techvpn 172.16.100.1 - 172.16.100.254
vpngroup address techvpn pool lsdvpn
No inside_outbound_nat0_acl access list
No outside_cryptomap_dyn_20 access list
inside_outbound_nat0_acl ip access list allow any 172.16.100.0 255.255.255.0
outside_cryptomap_dyn_20 ip access list allow any 172.16.100.0 255.255.255.0
Claire ipsec his
Claire isakmp his
sincerely
Patrick
-
Deployment on ADF Mobile (Android emulator) problem
Nice day
I use Jdeveloper 11.1.2.3.0
I have a problem when deploying my app on the Android emulator. Here is the log:
[13: 54:56] update Android profile dependencies with FAR profiles created from application projects...
[13: 54:56]-deployment began. ----
[13: 54:56] the target platform's (Android).
[13: 54:56] early deployment of ADF Mobile application 'FirstMobileApp' in Android using «TestProfile» profile
[13: 54:56] check the State of the Android Debug Bridge server...
[13: 54:56] Server Android Debug Bridge already running.
[13:55] check a single Android emulator is online and connected to the ADB server...
[13:55] early deployment of ADF Mobile application 'FirstMobileApp' in Android using «TestProfile» profile
[13:55] analysis of the dependence running...
[13:55] building...
[13:55] deployment of 3 profiles...
[13: 55:01] wrote the Archives Module to C:\JDeveloper\mywork\FirstMobileApp\ApplicationController\deploy\ApplicationController.jar
[13: 55:01] wrote the Archives Module to C:\JDeveloper\mywork\FirstMobileApp\ViewController\deploy\ViewController.jar
[13: 55:01] start preparing the package...
[13: 55:07] check the Application Controller project exists...
[13: 55:07] checking dependencies of applications...
[13: 55:07] Validation of the application XML files...
[13: 55:07] Validation of the XML files in the ApplicationController project...
[13: 55:07] Validation of the XML files in the ViewController project...
[13: 55:08] copy of FARs in the application of the Mobile ADF framework...
[13: 55:08] far from the source of the copy: ViewController...
[13: 55:08] copy by far the source: ApplicationController...
[13: 55:08] copy of resource files java framework...
[13: 55:24] copy of the common javascript files...
[13: 55:38] deployment of counting files...
[13: 55:38] copy of the application image files...
[13: 55:38] copy of the ADF Mobile configuration files...
[13: 55:38] .adf files...
[13: 55:38] copy of file security related to the application of the Mobile ADF framework...
[13: 55:38] Creation of preferences Android XML files...
[13: 55:39] creating AndroidManifest.xml file...
[13: 55:39] Creation of unsigned Android application file...
[13: 55:50] compile the file of the Android resource identifier...
[13: 55:52] create file classes.dex Android since the class files...
[13: 55:54] run command line: ['C:\Users\Nasir Amin\AppData\Local\Android\sdk1\platform-tools\dx.bat»,--dex,--keep-classes,--output="C:\JDeveloper\mywork\FirstMobileApp\deploy\TestProfile\classes.dex', C:\JDeveloper\mywork\FirstMobileApp\deploy\TestProfile\classes, C:\JDeveloper\mywork\FirstMobileApp\deploy\TestProfile\framework\build\jar\AND_ksoap.jar, C:\JDeveloper\mywork\FirstMobileApp\deploy\TestProfile\framework\build\jar\Container.jar, C:\JDeveloper\mywork\FirstMobileApp\deploy\TestProfile\framework\build\jar\IDMMobileSDK.jar] C:\JDeveloper\mywork\FirstMobileApp\deploy\TestProfile\framework\build\jar\logging_dalvik_release.jar C:\JDeveloper\mywork\FirstMobileApp\deploy\TestProfile\framework\build\jar\phonegap.jar, C:\JDeveloper\mywork\FirstMobileApp\deploy\TestProfile\framework\build\jar\vmchannel_dalvik_release.jar]
[13: 55:54] "" C:\Windows\system32\java.exe"" is not recognized as an internal or external, order
[13: 55:54] operable program or batch file.
[13: 55:54] command-line execution failed (return code: 1).
[13: 55:54] run command line: 'C:\Users\Nasir Amin\AppData\Local\Android\sdk1\platform-tools\dx.bat»--dex--keep-classes--output="C:\JDeveloper\mywork\FirstMobileApp\deploy\TestProfile\classes.dex' C:\JDeveloper\mywork\FirstMobileApp\deploy\TestProfile\classes C:\JDeveloper\mywork\FirstMobileApp\deploy\TestProfile\framework\build\jar\AND_ksoap.jar C:\JDeveloper\mywork\FirstMobileApp\deploy\TestProfile\framework\build\jar\Container.jar C:\JDeveloper\mywork\FirstMobileApp\deploy\TestProfile\framework\build\jar\IDMMobileSDK.jar C:\JDeveloper\mywork\FirstMobileApp\deploy\TestProfile\framework\build\jar\logging_dalvik_release.jar C:\JDeveloper\mywork\FirstMobileApp\deploy\TestProfile\ framework\build\ jar\phonegap.jar C:\JDeveloper\mywork\FirstMobileApp\deploy\TestProfile\framework\build\jar\vmchannel_dalvik_release.jar
[13: 55:54] undeployment.
[13: 55:54] - incomplete deployment.
[13: 55:54] deployment failed due to one or more errors returned by "C:\Users\Nasir Amin\AppData\Local\Android\sdk1\platform-tools\dx.bat". What follows is a summary of the returned error:
Command-line execution failed (return code: 1).
You have Java 1.6 installed SDK? If Yes, can you specify the environment variable JAVA_HOME for this?
See you soon
AJ
-
Help with MS Access SQL Developer Import (problem of DateTime field)
So here's my dilemma...
I am currently trying to import from MS Access to SQL Developer, by exporting MS Access to MS Excel and then import in my table of the exporting Excel sheet. What happens is that when I import the excel sheet, it is does not keep the format of date/time / I tried several different formats, but everyone seems to exclude the time and the date.
My field of date/time is currently set up like this on SQL Developer:
DD/RRRR/MM HH: MM: SS AM/PM
And the Excel sheet, I'm importing the field corresponding, defined as follows:
mm/dd/yyyy/hh/mm/ss AM/PM
The answer (s) I'm importing is as follows:
Date/time physical_cpu server_id
01/11/2013-12:01:23 AM scc415 6.03999996
When the record is imported, it eliminates the time, so the imported data are:
Date/time physical_cpu server_id
01/11/2013 6.03999996 scc415
Any idea on how to get this timestamp to import properly? Many appreciate the ideas in advance!
Looks like I have found the solution. For some reason, export to leave access to Excel first and then open and save the file as a .csv instead of a .xlsx, date/time information are maintained. This problem has been resolved.
Found the solution on the following link for anyone interested.
-
Hello
I create an application with HTML5 which uses the cache manifest file. All files has been cached fine (good), but I can't know when the cache is finally over because your status to stay the same (zero) and the event fires. The same problem occurs with DPS, and talk without a solution to it (even now, the currently adobe content viewer stay with this bug).
Do you know when it's going to be fixed?
An example: https://gist.github.com/felipehaack/c858e416e7187763739d
Thank you very much.
To close the loop on this, the change to enable this API on Android in 2015 of DPS is done and will be available in the version that comes out about four weeks from now.
Neil
Maybe you are looking for
-
Cannot find the driver for Win 7 32 bit for TOS6205 Satellite L series camera
Hello After that I have SEVERAL tests can not find a driver for my pc consist of: TOS6205,. Can you help me. Thanks guillaume
-
I have 3 computers XP on a windows network. A computer is not authorized one of the shared folders/files anywhere, including himself. The answer is... is not accessible. You might not have permission to use this network resource... Not enough serve
-
BlackBerry Torch 9800 Blackberry Smartphones
I need to remove an IT policy from the phone that I'm no longer with the company of that phone has been registered? How can I go about it?
-
Need a script for the network card and Vswitch info
HelloCan we have a script to list out the output of information network/vsiwtch as below for all clusters in VC to CSV. Name of host mcadress name of the physical card Vswitch name team Vswitch (NLB/FTL)