In MS access throught labview connection problem

Similar Questions

• Remote access over Internet connection problems

  I'm trying to figure out how to get remote access to work via the internet. I used to work and it works very well, but we are also on a local network. I have sent the invitation to someone and the password, but it does not connect. I tried the following:

  • Computer Management / Services / connection manager (manual) remote access & routing and remote access (manual)
  • Windows Firewall / allow a program... / Exceptions / Allow: Remote Assistance & routing and remote access
  • Disabled Norton Firewall

  I have alos got my friend to make sure that its parameters match mine. And I still have no success. Does anyone have other ideas? Alternatively, it won't work because I am trying to connect via the internet?

  Hi nataar, 

  Welcome to Microsoft Answers Forums.

  • What software do you use for remote access?
  • What is the version of Windows installed on the computer?

  If you use Remote Desktop connection in Windows Vista, try the procedure below

  Log your PC computer with an account that has administrator privileges.

  Step 1 open the start menu, right-click on "My computer" and select "Properties". A window with the options and details of the computer opens on your screen.

  Step 2 go to the 'Remote' tab at the top of the window "Properties".

  Step 3 check the box for the option "Allow users to connect remotely to this computer" in the section "Remote Desktop" in the Properties window.

  Step 4: click on the 'Apply' button at the bottom of the window to save the changes and enable the remote desktop. Outside users will now be able to access your computer over the Internet.

  Enabling remote desktop access to your computer

  To activate the Office remote connections to your computer, follow these steps:

  1. Click Start, right-click computer, and then select Properties.
  2. Under tasks, click settings on the remote control and confirm the user account control prompt.
  3. Select allow connections from computers running any Version of remote desktop. (Version 'more safe' only works on using IPSec security, and on these networks business networks, you probably will not be allowed to change these settings in any case).
  4. By default, all administrator-level accounts can connect to the computer. If you want to grant remote desktop access to a limited number of users, click Select users, add, advanced, find now and then find the desired name in the search results section. Double-click it. To add another name, click Advanced and find now again.
  5. Click OK to close the dialog boxes.

  NOTE A password must be set on a user account before the user can connect to the remote computer.

  At this point, you must do two things to make sure that remote desktop has been implemented correctly:

  • Click Start, Control Panel. Under Security, select allow a program through Windows Firewall and confirm the user account control prompt. On the Exceptions tab, find the Office remotely in the list of Exceptions and do not forget, that it is checked. If it isn't, check it out. On the general tab, make sure that block all incoming connections is not checked.
  • Use another computer to test the remote desktop before you get involved in the Internet game. Follow the instructions in the second part of the chapter to open the desktop client remotely on another computer on your network. As the host name, type the name of the computer you just put up. Make sure that you can connect on your own local network before continuing.

  Remote Desktop connection: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/Remote-Desktop-connection-frequently-asked-questions

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Why do I get "Connection problem" on my laptop, when I try to access my e-mail account Yahoo with the new version of Firefox?

  Since I updated firefox to 29.0.1 on my desktop, I can't access my account at Yahoo.com from my ASUS laptop. "Connection problem" appears when he tries to retrieve new messages. I received mail on the ASUS 12/03/13, but from now on I get this message and no new mail arrives at the ASUS.

  Some problems occurs when your Internet security program was set to trust to the
  a previous version of Firefox, but no longer recognizes your updated as version
  level of confidence. Now how do I solve the problem: to allow Firefox to connect to the Internet
  Once again:

  • Make sure your Internet security software is up-to-date (for example, you are using the latest version)
  • Delete Firefox to list your program of trusted or recognized programs, then add it again. For detailed instructions, see Configure the firewall so that Firefox can access the Internet.

• I can't access the internet. Diagnostic says I have problem winsock. Windows XP could not fix the connectivity problem.

  For windows XP Network Diagnostics says I have a problem with the Winsock provider catalog.

  Hello

  1. don't you make changes to your computer, after which the issue started?

  ID is recommended to run the program "Fixit" of this article or / and follow the steps manually and check if the problem persists.

  http://support.Microsoft.com/kb/811259

  See also:
  Windows wireless and wired network connection problems

• Access only "Local". Wireless connection problem.

  I have a Compaq Presario CQ60-211DX running MS Vista. Yes I know. in any case, I am able to connect to any available WIFI, except my personal home WIFI. If it is directly connected to the ethernet cable, I'll have internet, but once I disconnect it-i lose. My wireless says "Local" only signal I've tried everything. To restart all electronic devices which means my internet to read on the fourms a lot, a lot. I used the Norton removal tool, I did the regedit, MS Vista update, checked for drivers updated and nothing else I can read up. SO PLEASE! Help!.

  Hi RedskinsBnG,

  ·         Did you do changes on the computer before the show?

  ·         You get the error message?

  ·         He has already worked?

  Follow these methods.

  Method 1: Temporarily disable the security software .

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: Follow these steps:

  Step 1: Start the computer in safe mode with network and check if the problem persists.

  Step 2: If the problem does not persist in safe mode with networking, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow the link step 7 to return the computer to a Normal startupmode.

  Method 3: Follow the steps in the article.

  Solve problems, find wireless networks

  Windows wireless and wired network connection problems

  Reference: wireless networking: frequently asked questions

• Strange internet connectivity problem

  Hello!

  I'm having a connectivity problem I have never met before. I use a wireless router from Apple with internet cable.

  Yesterday, my computer would be is no longer in contact with my router wi - fi. I get a message that the network could not be attached (I ran the Diagnostics wireless, but it's a whole lot of sense to me empty files). However, I also have a Roku, and which IS connected to the WiFi without problem. I completely stopped and restarted the computer, no joy. Reset the modem and the router, no joy. Still works with Roku, not with the computer. But the weird part is, I have Optimum Online, which allows subscribers to log-in to its hotspots, and it worked! I am connected Optimum wi - fi network on my computer right now.

  So I don't know where is the problem! It is not the router, because this is related work with Roku and is not the computer, because it is connected and working with the Optimum hotspot. What gives?

  Try this!

  Go to the Apple menu > System Preferences > network

  Select a Wi - Fi connection in the sidebar and then click on the button "Advanced...". "in the lower right corner of the screen

  In the list of preferred networks, delete the name of your Wi - Fi network

  Click on the "OK" button to save that change and then 'apply' in the network preferences window.

  Now, go to the Applications folder > utilities > Keychain Access

  Make sure that "Login" keychain is selected and "All items" in the category is selected in the sidebar

  Use the search field to find items that Keychain with the name of your Wi - Fi network and remove

  Quit Keychain Access

  Now try and access your Wi - Fi network

• LJ pro M177fw: eprint center connection problem

  Hello

  today I am trying to add my new printer to my eprint account, but I do not remember my pwd, so I want to co reset the password.

  By e-mail, I received a link

  http://h30495.www3.HP.com/reset_password/xxxxxxxxxxxxxxx

  but it didn't work, the Web server show this error:

  SERVER ERROR

  Oops! Only, something was wrong with our server.

  Try refreshing the page.

  I tried different browser and pc, but I can not reset my pwd.

  Is there a solution to this problem?

  Is the server down for ever?

  Thank you and best regards.

  Roberto

  Hey @Roberto_ITALY,

  Thanks for posting in the Forum from HP Support.

  I understand that you are unable to claim your HP Color LaserJet Pro MFP M177fw in your account ePrint Center due to a connection problem.  I would like to help.

  I don't see this particular error with password resets from time to time.  I have a workaround that can clear up this place for you:

  • Click here.  This will bring you to <www.snapfish.com >.  As the Snapfish site is linked directly with ePrint Center and HP connected, you can try to reset your password as follows - click the connection icon and then "forgot your password":

  

  • Enter the e-mail address that you use to connect to the ePrint Center and click on submit.
  • You should receive a message of automatic reset of password by email - the reset as expected before and then try to use this new password to Snapfish to connect downtown ePrint.
  • If this does not solve your problem of access ePrint Center, please call our Cloud Services to 855-785-2777. If you do not live in the United States / Canada region, please click the link below to get help from your region number.
    
    http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  I hope this helps.  If my suggestion worked in your favor, feel free to give me a virtual h.o.t. by clicking on the 'Thumbs Up' icon below.

  Have a great day!

• Satellite U400 - S00 Wireless connection problem

  I have a Satellite U400, which was lowered to XP Business.
  Wireless networking seems to work only intermittently.
  I can see several netoworks available and that you have selected the office, wireless access Point to connect automatically. It is the only network that I listed for to connect you.

  The laptop often fails to connect the access point, often trying to connect to another nearby wireless device unsecured.
  If I manually select the office network and click 'Connect', it asks for the key wireless (I have enter) and then it connects briefly, gets an IP via DHCP and disconnects quickly about 10 seconds later.

  If I repeat the reconnection attempts, sometimes I am able to keep the connection for several hours, but if I stop and restart I have to repeat the same procedure. I downloaded what I think is the most up-to-date intel wireless drivers, but I would appreciate a pointer to the most recent.

  I'm not using the ConfigFree, just the menu of Windows Wireless configuration base (Zeroconf service)

  This is driving me crazy. Help, please.

  J

  Hello

  I found this thread and I would like to my experience with the U400.
  Yes, I have a U400 and I installed Win XP Pro.
  I have an Intel WLan card and I already updated the driver WLan to the State.

  I found new drivers here:
  http://APS2.toshiba-tro.de/WLAN/

  I must say that my WiFi works without problem! I have the latest version of the BIOS and I never noticed any problems.

  I must also say that I have don t use tools of any additional WLan configuration but ONLY options specific to Windows and its ok.
  I have disabled the Intel ProSet utility Msconfig and it does not load at the beginning.

  I have configured my OS and laptop computer ONLY connects to my wireless private network.
  Of course if my private Wlan is not available it automatically connects to a WLan unsafe in my range.

• How to allow another computer to access my wireless connection

  I'm connectedo to router Wireless 'InfostradaWifi '. Please help to allow me to set up this computer to allow access wifi by any computer nearby. A nearby computer gives the message: "cannot connect to the hidden network"InfostradaWifi". Thanks in advance for your help.

  Isaac

  Hello

  Windows operating system you are using?

  Method 1:

  Configure the computer to start clean, temporarily disable the firewall and Antivirus

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  How to set up Windows 7 to start in a "clean boot" State

  http://support.Microsoft.com/kb/929135

  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 2: Wi - Fi and in Windows network connection issues

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  See also:

  Wireless network card: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/wireless-networking-frequently-asked-questions

  I hope this helps.

• I got these messages: "Sorry, there is a problem with Hotmail right now"... "Hotmail is having connection problems.

  I got these messages: "Sorry, there is a problem with Hotmail right now"... "Hotmail is having connection problems. You might see an error message when you try to connect.

  original title: cannot access Hotmail

  I need to go to my account to retrieve an important document for a meeting! Please advise how can I sing to my account?

  Hello

  The Hotmail service problems. See the following link to check the status of the service.

  Status of hotmail - Windows Live: https://status.live.com/detail/hotmail

  Once the service has been restored, there will be a notice at this link.

  Concerning

• G-72 laptop HP: network connection problems

  Hello: I have no internet connection. Here's what I know: unidentified network no internet access. Wireless LAN, Microsoft Virtual WiFi Miniport Adapter. In addition, all security settings are OFF. This has just begun. I have no explanation. Any help is appreciated. Thank you... M.

  Hi there @MesaRey,

  I understand that your computer is no longer connected to the internet. I'm happy to help you with this. Please report the number of complete product for your laptop. Check out the following, if you need assistance with this information. How can I find my model number or product number?

  If other devices are connected and the only one having trouble is your laptop, then you can try a system restore, just in case there is a change to your system. Select a restore point before the problem started and test the connection.

  Using Microsoft System Restore (Windows 7)

  The following pages are useful for troubleshooting wireless connectivity problems.
  Troubleshooting your wireless network and Internet access (Windows 7)

  In addition, you can watch the the power management of your wireless adapter:
  Turn off the power to the adapter:
  1. open Device Manager. (Win Key + R > type devmgmt.msc > OK)
  2. expand the network adapters.
  3. right click on the Ethernet adapter / wireless, and then click Properties.
  4. click on the power management tab.
  5 remove the check mark next to allow the computer to turn off this device to save power.
  6. click on OK.
  7 test cycle.

  Forget a network (Windows Vista)
  1. start network and sharing Center.
  2. in the pane tasks, click on manage wireless networks.
  3. right click on the connection that you want to delete and then click on remove network.
  4. in wireless networks handle - warning dialog box, click OK.
  5. the connection is removed from the list of wireless connections that you can view or edit.

  Forget the network: (Windows 7)
  1. press start.
  2. tap manage wireless networks, click on the application at the top of the start menu.
  3. right click on the network, and then click on remove network.
  4 confirm the warning by clicking OK.

  Forget the network: (Windows 8)
  1. press Windows Key + C
  2. click on settings.
  3. click on change PC settings.
  4. click on network on the left.
  5. click on manage known networks.
  6. click on the name of the network.
  7. click on forget.

  Reset TCP/IP on your PC:
  1. go to your start screen/menu and type CMD.
  2. right-click on the command prompt icon and select run as administrator.
  3. in the window that opens type "netsh int ip reset resetlog.txt" without the quotes and press ENTER.
  4 restart your PC and test.

  It can also help to reset the winsock catalog:
  1. go to your start screen/menu and type CMD.
  2. right-click on the command prompt icon and select run as administrator.
  3. in the window that opens type "netsh winsock reset" without the quotes, and then press ENTER.
  4 restart your PC and test.

  Reinstall the NIC drivers:
  1. download the drivers from here, but do not run them again.
  2. go to your Start menu/screen and type Device Manager.
  3. expand network adapters.
  4. right click on the wireless adapter and choose uninstall.
  5 install the drivers downloaded in step 1.
  6. restart your PC and test.

• Standard user (guest) account can not access my wifi connection

  Original title: I installed ie9 on my administers ACCT. and she sails very well, but now the standard (guest) user account cannot access my wifi connection. How can I get the hanging guest account?

  Windows vista 32 bit

  Hello

  You get the error message? If Yes, what is the full and exact error message?

  Method 1:

  Try to run the troubleshooter and check if it helps.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 2:

  I suggest you to refer to the article and check if it helps.

  Setting up a wireless network

  http://Windows.Microsoft.com/en-us/Windows-Vista/setting-up-a-wireless-network

  Method 3:

  I suggest to disable the antivirus software and check if it helps.

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Note: run the computer without antivirus software or firewall is a potential threat to the computer; Be sure to activate security software after completing the troubleshooting steps and after identifying the problem.

• Connection problems on Netflix in Media Center: "there was a problem of signing. Make sure your internet connection is working and try again. »

  Original title: Netflix in windows media center, connection problems

  I saw disorder connect to Netflix on windows media center. I am running windows vista x 64. When I select the icon of the login screen appears, but when I try to connect it comes up with the error message "there was a problem of signing. Make sure your internet connection is working and try again. "my internet connection is fine and I can connect to http://www.Netflix.com/, so this problem should make windows media center, but I can't understand it. I have updated windows and windows media center and I'm still having this problem. Thanks in advance for any advice.

  The most likely explanation is NetFlix changed something in their routine of authentication (i.e. SOAP structure or just a URL string, whatever) and who broke the Vista NetFlix WMC client. It did not affect the web interface of NetFlix because operated a NetFlix service, they were obviously aware of the change pending and adjusted their web client to use the new method.

  Customer WMC NetFlix in Windows 7 (which is a new product), was probably already coded to use the new method. The client in Vista has continued to work with the old method, until NetFlix finally stop this method. Microsoft, slow to react and to assign developers to fix the Vista NetFlix WMC client missed the deadline and Vista users have been in the dark for a while.

  That's pretty standard for web services that cross corporate barriers. Particularly involving slow mega-body like Microsoft. A company change a routine and the other has to play catch-up. Communication is often difficult between the divisions within a company, between companies, it is often non-existent.

  The level of prissy whining in this thread was good for a laugh however. Those threatening to cancel NetFlix: rolleyes: your access was still working on their Web site. You were not without service, just, without the convenience of WMC. People grumble at Microsoft... anyone know if Microsoft was still knowledgeable of * when * NetFlix was going to turn off the old authentication? If they were told the night before (or any) "Hey let's turn off the old authentication routine" what kind of response do you expect? How long is it since the problem began, 28 days? It's actually a pretty fast for an element relatively low priority. Or it could just be that NetFlix reactivated their old methods of authentication as a temporary solution to this problem (they share a part in creation) until Microsoft can respond formally with an update.

  Now if Microsoft was duly informed advanced evolution of the service, still dragged feet (quite possible) I don't give them no slack. But at the end of the day, it is always a matter of low priority. It's fixed now, be happy until the next time that Netflix change their authentication routine.

• WRT610N connection problem

  I just bought my router today but there is a connection problem.

  My vista has shown that there is connection to my router, but when I launched internet explore there is no internet connection.

  I tried to use all the different browsers (Firefox, Opera), but the result is always the same.

  I then restart my computer stop and on my modem and router. but the problem always arises.

  I tried to connect it to my other routers, WRT54GL(wireless G) and BEFW11S4 (wireless-B) which worked yesterday (got to check out them before buying my new router to make sure that the problem can be the cause of my new router). but my computer still facing the same problem. the router is connected to my computer at 100% but I can't access the internet.

  I then directly connect my computer to the modem to verify that the modem works and I type to now you. I also changed my cable lan to ensure that all my cables work.

  Please tell me what to do to get my fixed connection. Thank you!

  Well try the upgrade of the firmware on the router & then reset the router for 30 seconds in order to feed the light flashing on the router & also make the full network of such feeding cycle so that the power light flashing on the router, you will be able to solve your problem.

• Wireless connection - problems since the installation of our BT package

  Since the evolution of our package BT last year, we have been unable to connect to one of our computers with a Windows operating system on a wireless basis. We have transformed a machine to the Linux operating system and that connects to each time. The old Center has been postponed, but did not make a difference. BT feel is the environment, however why the OS linux connect wirelessly. Can be a help for this?

  Here is a tutorial on how to set up a home network (including a wireless)-click on additional links for more information that may be helpful:http://windows.microsoft.com/en-US/windows-vista/Setting-up-a-home-network.

  Here is an article on troubleshooting network connections wireless (with links):http://windows.microsoft.com/en-US/windows-vista/Troubleshoot-network-connection-problems.

  Here's a long guide on wireless internet connections in Vista:http://www.techwarelabs.com/guides/misc_mod/vistaconnection/.

  Here is an article on how to set up wireless internet in Vista:http://www.clpgh.org/usingthelibrary/technology/wireless/WindowsVista.pdf.

  You must set up a wireless internet connection in the network as well as the connection sharing normal LAN wireless and connect to it as well as the local connection.  If you don't do this, you will not have an internet connection.  You need both.  You must also enable some features in the main area sharing network to access the internet - they are quite well defined.

  I hope this helps.

  Good luck! Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.