Windows XP network

I have 3 computers XP on a windows network.

A computer is not authorized one of the shared folders/files anywhere, including himself.

The answer is... is not accessible.  You might not have permission to use this network resource...  Not enough server storage is available to process this command.

My windows and Macafee firewall is disabled.

Other two computers with Macafee see each other and view shared files/folders.

Dysfunctional computer can see other shared folders and files of two computers.

Any ideas?

Advertisement

Hello

Maybe this can help, http://support.microsoft.com/kb/177078

-------------

Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

General example, http://www.ezlan.net/faq#trusted

Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

Windows XP file sharing - http://support.microsoft.com/default.aspx?scid=kb;en-us;304040
Sharing printer XP - http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspx

Setting Windows native firewall for sharing XP -http://support.microsoft.com/kb/875357

In Win XP pro you can visually see the setting of authorization/security and configure them according to your preferences.

http://www.Microsoft.com/windowsxp/using/security/learnmore/AccessControl.mspx#securityTab

When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.


Jack-MVP Windows Networking. WWW.EZLAN.NET

Tags: Windows

Similar Questions

  • Impossible connecting to "fix it online." "Signins other Live" are OK - get the message "the Windows Live network is not available on this site.

    Get the message "the Windows Live network is unavailable on this site".

    Hello

    The question you have posted is related to windows live and would be better suited to the community of windows live. Please visit the link below to find a community that will provide the support you want.
    http://windowslivehelp.com/

    Kind regards
    Afzal Taher
    Microsoft technical support engineer

  • Connection to a Mac on a Windows 7 network

    I have a MacBook Air on a network of PC (Windows 7), and I can connect the PC to the Mac, but not the reverse. I used to be able to communicate in both directions, but I think I forgot the password I need to connect from the PC. Here is what is happening on the PC:

    -Windows Explorer > network displays two icons of computer, JOHNS-AIR (Mac) and the FLOOR (PC).

    -I double-click JOHNS-AIR, get a dialog titled "Windows security" that says "enter your password to connect to: JOHNS-AIR" and displays a Userid (to the FLOOR/jatay) and a text box empty for the password. The part "jatay' of the user ID is the name of the home folder on the Mac, and it's a shared folder.
    -I provide my Apple ID, I use the password as a password for my Mac, and it is rejected: "connection failure: unknown username or bad password."

    If my ID Apple for Mac is the wrong password, where can I find the right one?

    For what it's worth, I used a PC "Network Password Recovery" utility to try to find the password and for ' domain: target = JOHNS-AIR "it returns"UPSTAIRS\jatay"for the user and my Apple ID password.

    Any info, thanks a lot.

    Hello

    Since you have a problem with your login for an Apple ID, we suggest you get in contact with Apple support team to provide you with assistance of your concern.

    Kind regards.

  • Windows 7 network connection status sent/received packets in bytes by default. How can I change this setting so that the status is displayed in MBs.

    Windows 7 network connection status sent/received packets in bytes by default. How can I change this setting so that the status is displayed in MBs.

    Hey Muhammad,

    Thanks for posting the query on Microsoft Community.

    Design/default it appears in bytes not in MB.

    In the future, if you have problems with Windows, get back to us. We will be happy to help you.

  • Windows 7 network card help please!

    I'm new to the answers.

    The week last that happen recently to my computer

    Please help I tried a variety of things and don't know what else to do

    Try the suggestions to: http://windows.microsoft.com/en-gb/windows/fix-network-adapter-problems#1TC=windows-7

  • Windows 7 network icon systems do not show popup connections

    Normally, when you simply right click on the Windows 7 network icon in the system tray, it opens a window showing your connections and available all other connections. Now however, after using the laptop for several hours, and after that unlocks a few Office and a resumption of the mode standby, this no longer works. I click and nothing happens. The only way I can access this is right-click on the icon, open the network and sharing Center then click on "connect or disconnect." It is a pain I need to connect/disconnect continuously different VPN.

    If I re-boot it starts working again. I can't find the exact scenario to make, work stoppage, but it happens regularly.

    Hope there is a fix for this.

    James

    Hello

    Try these but I recommend that you ask in the TechNet forums also as perhaps more
    He has seen this happen. Usually, this is the icon itself disappearing, not functionality
    you encounter.

    Try the methods below and if no success asking on TechNet.

    Windows 7 IT Pro Forums
    http://social.technet.Microsoft.com/forums/en/category/w7itpro

    -----------------------------

    Follow these steps to remove corruption and missing/damaged file system repair or replacement.

    Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

    sfc/scannow

    How to fix the system files of Windows 7 with the System File Checker
    http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

    Then run checkdisk (chkdsk).

    How to run check disk in Windows 7
    http://www.SevenForums.com/tutorials/433-disk-check.html

    ====================================================

    After that the foregoing: (here, the NETWORK card and Wifi are interchangeable in the sense that the two must be
    fact that you can do if you first use).

    Follow these steps:

    Control Panel - network - write down of the brand and the model of the Wifi - double click - top
    tab of the driver - write version - click on update driver (can't do anything like MS
    is far behind the pilots of certification). Then right click on the Wifi/NIC device and UNINSTALL
    -Reboot - it will refresh the driver stack.

    If necessary to download drivers on another machine and transfer on the problem computer via
    removable media such as a USB key or CD - DVD.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    Installation and update of drivers under Windows 7 (updated drivers manually using the methods
    below is preferred so that the latest drivers from the manufacturer of system and device manufacturers are
    found)
    http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

    Download - SAVE - go where you put it - right click – RUN AS ADMIN.

    You can download several at once however restart after the installation of each of them.

    After watching the system manufacturer, you can check the manufacturer of the device an even newer version.
    (Those become your fonts of rescue system manufacturer).

    Repeat for network (NIC) card and is a good time to get the other updated drivers as windows
    7 love the updated drivers.

    ======================================

    If necessary:

    How to do a repair installation to repair Windows 7
    http://www.SevenForums.com/tutorials/3413-repair-install.html

    =======================================

    Other possibilities include something running is interfering - programs suspects antivirus/security
    Among others.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7
    http://support.Microsoft.com/kb/929135

    How to change, add or remove startup programs in Windows 7
    http://www.SevenForums.com/tutorials/1401-startup-programs-change.html

    Autoruns - free - see what programs are configured so that it starts automatically when your system
    boots and you login. Autoruns shows you the full list of registry and file locations where
    applications can configure Auto-start settings.
    http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • How to make the Windows 7 network icon to show availability of internet connection? With flashing.

    How to make the Windows 7 network icon to show availability of internet connection?

    Flashing

    Hi RaDiCal007,

    Microsoft has removed the option host connection icon network; apparently drain you resources. Like you, I prefer much the icon 'flashing '.

    This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

    John Barnett MVP: Windows XP Expert associated with: Windows Desktop Experience: www.winuser.co.uk | vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com

  • AAA accounting in charge of the Windows 2008 network POLICY server log

    Hello world

    We have configured our Cisco devices to use Windows 2008 network POLICY server for RADIUS.  However, we cannot configure aaa represents priv 15 commands to use the same radius servers for recording of commands in privileged mode.  When you set up by using the following command:

    AAA commands 15 arrhythmic default accounting RADIUS_SERVERS group

    I noticed that there is only GANYMEDE + servers 'group' categories and optional.  After entering the server radius group, I realized that the command is not saved and by inspecting the logs I saw the following:

    The 'MF_RAD' server group is not a Ganymede server group. Please define "RADIUS_SERVERS" as a Ganymede server group.

    This means that the function of accounting 'orders' (and probably most others) can be activated only when you use a GANYMEDE Server +?

    Thanks in advance

    You're absolutely right. Accounting command only works with Ganymede. We cannot have the command for the radius Protocol accounting. RADIUS accounting only gives you start and stop sessions package.

    ~ BR
    Jatin kone

    * Does the rate of useful messages *.

  • How can I add a network from Windows XP to Windows 7 network. I use a Linksys WRT54G2 router.

    How can I add a network from Windows XP to Windows 7 network.  I use a Linksys WRT54G2 router.

    Try the method here...

    http://www.howtogeek.com/HOWTO/15247/complete-guide-to-networking-Windows-7-with-XP-and-Vista/

  • How to make the Windows 7 network icon to show availability of internet connection?

    Hello!
    Windows 7 network icon shows no availability of internet connection. Windows Vista network icon showed availability of internet connection with a globe. How to make the Windows 7 network icon to show availability of internet connection?
    Concerning

    Hello kopn,.

    Thank you for visiting the Microsoft answers community.

    The icon for your internet connection, but the animation and the color associated with the network icon in Vista and earlier versions is no design in Windows 7.
    Chris.H
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • OfficeJet pro 8600 kills Windows XP Networking

    OfficeJet pro 8600, several computers Windows XP networking.

    I have 4 different 8600 OfficeJet Pro installed on 4 different sites, purchased from different vendors. In any case, I get the same problem.

    There is a network problem. All printers are connected to the network.

    The printer is not the cause of the problem. The problem persists even if the printer is turned off.

    The problem is that: when the computer is turned on all night, the next morning, Web pages aren't accessible, and the networks of communication with the printer is missing. You cannot print, and you can not navigate.

    You can ping the router, ping the external DNS servers, and you can test Web pages. Navigation is affected. And printing.

    Turning the printer off and restarts do not affect the problem. Restarting the computer solves the problem.

    Kill all the services of iexplorer running in taxk Manager solves the problem.

    HP support says it is a XP problem and they have no intension to work on the problem. They think it's a network problem disconnected operating system after 2 hours. They are wrong. I left the computer alone for more than 4 hours and the problem is. It occurs if you leave the computer on all night.

    Windows XP-based computers were all updated for the latest updates and are running SP3.

    The solution is to disable the computer function on computer analysis, solves the problem of navigation.  Always change the notification of ink for printing only.  This action has resolved the problem of printing defect.

    I have the latest version of the software and the latest firmware.

    I can't believe that if panasonic can write software because it has networked copiers (all printers) that still work and are easy to install on windows xp, HP cannot write similar software.  I am referring to analyze computer software.

  • Windows 2008 network load balancing

    I hope someone can help.

    I'm looking to start to test the Windows 2008 network load balancing. This will serve a webfarm. I went through various whitepapers, and forum messages but who have a few more questions:

    1. I get VMWare recommends multicast. Windows 2008 gives you two options, multicast and IGMP multicast. Seeing that I'm not an expert in network management, I'm a little nervous about the switched. Apparently to enable IGMP Snooping on your Cisco switches eliminate this? Is this true, if so you need install your cluster as IGMP Mulicast?

    2 do you need to have dedicated NICs for the NLB cluster, separate vSwitch etc.? If this is not the case, there will be interference with the existing production network?

    3 is a necessary static arp entry on your switch? All switches or just the farm goes where the ESX hosts are connected to?

    Some info would be appreciated.

    1 have not tested, but IGMP snooping is what caused problems before because the switch ports would not join the group correctly, so it is suitable to test whether the OS is ready to send packets.

    2. it is better to use separate vNIC to the virtual IP address of the NLB cluster

    3 static arp would be necessary if the IGMP snooping does not work for the switch ports that will be the virtual machine hosts that are part of the NLB cluster.

    -KjB

  • After update to 10.11.5 I may more access shared folders/printers Windows PC network

    My Mac repeat myself "you are not allowed access to this server." whenever I try to connect to a shared folder on a Windows 7 PC. Also, I can't print on a shared printer connected to a Windows PC.

    These two things worked perfectly before the update. Nothing has changed on the PC.  I tried to restart both computers. I tried without sharing and re-sharing the folder on the PC. The folder is configured to allow "free access" to "everyone" access as guest.

    Any suggestions?

    No problems like that here (post - 10.11.5). But inter-networking with windows has been hit or miss as long as I remember. Good luck finding the bug...

  • BootCamp6: Microsoft Windows 10 network software error

    Hello

    Last week, I tried to install Windows on my MacBook Pro 10 (model: MacBookPro11, 5) using BootCamp6 and everything worked fine (it was a test).

    I uninstall and try to install it again (for a show), but I'm stuck with the problem of network error ("cannot download the software due to a network problem). I tried to use my iPhone as a modem, a network cable, nothing works.

    I also tried to download the package with Brigardier (https://github.com/timsutton/brigadier), the software can be downloaded successfully.

    You have an idea how I can deal with it?

    Thank you!

    Can you try to repair your disk using disk utility and first aid?

  • Problem domain Portege Z930-13 x - error Windows 8 - network

    Hello

    I am owner of a Portege Z930-13 x with windows 8 is installed.
    My work is connected to a domain network and work very well until today.

    When I started the PC and I put my password it says: "the security on the server database has not a computer account for this trust relationship.

    On windows 7 and XP I could easily enter the admin user and correct this problem by re-connected to the domain of may server.

    In this case, I can't enter the administrator or user mode because it gives me the error of the soul.
    I can't restart the computer with a cd/dvd-rom or a usb pen with hirens boot or other kinfd of the software that I use.

    How can I fix?

    Thank you

    In my opinion that's not Toshiba related question and the answer should be offered by Microsoft.
    Perhaps someone can offer a solution. Until then check it please if someone can help on http://social.technet.microsoft.com/Forums/en-US/category/windowsserver

    I hope someone can help. If you will be able to find solution to be nice and post small report on this issue.

  • Satellite 2410-504-driver Windows 2000 network missing

    Where can I ask for Toshiba create a network of Windows 2000 for my PC driver laptop Toshiba 2410-504? As you can see, Toshiba 2410-504 has drivers for the two 2000 & XP. If I install XP then I get everything works perfectly. If I install 2000 then I get everything works perfectly but the network card. Somehow the Intel PRO network adapter is not detected...

    You are right. LAN driver is not available for download, and I presume that driver LAN should not be installed separately. I found the info that this Satellite is supported for W2000 SP3. This means that this book must be installed with the W2000 SP3 to have all the features.

    Which SP is preinstalled on your laptop?

Maybe you are looking for


HashFlare