Access to the DMZ to remote sites via VPN S2S

Similar Questions

• Use the remote website via VPN site-to-site

  Hi all

  We have two sites, the site has and B. At site A, we have a Web site we want to share with all of site B. Currently, site B can access the site via the VPN site-to site on X 0, which is their LAN. Nothing outside X 0 cannot access or ping to the address.

  We added access rules to allow access from the DMZ to this interface, but again, no ping and no communication at all. The other strange thing is that we see that no trip package for these access rules either.

  Any help is appreciated. Thank you.

  It seems that the demilitarized zone is not part of the VPN tunnel.

  Can you confirm that the DMZ subnet is part of local destinations on the site B and a part of the local destinations on site?

  Kevin

• When you expand to show the local and remote sites in DW CS6 how local to be left?

  When you expand to show the local and remote sites in the previous version of DW, the type of files (local or remote) selected when you see do not both, automatically came on the left.  I liked local when I'm editing and when I'm ready to download I expand to see the two premises remotely.  Before, the one you selected, in my local case, was always displayed on the left.  In CS6 when I local selected before I develop, the local is now right and distance on the left. For me, this is not correct.  I find that having local on the works of best left to me as reading, left right, I want the room on the LEFT, so I put the update on the left of the remote control on the right.

  in DW CS6-> How to get the local to be on the left?

  Edit > Preferences > Site

  Change the right to the left on the top.

• How can I change the definition of remote site without breaking all the links?

  I created a website and put it here http://home.Comcast.NET/~alpsf/index.html to test it during construction.  Now when I change the definition of remote site to the local site in DW, all the links are broken.  I suspect now that the problem is I did my site root and ~alpsf/ DW inserted in all the links.  Is there a way to fix this?

  Thank you very much.

  You can do a search and replace to change the links in the world. Make sure you do a full backup of the site before doing this incase you do not correctly. Let me stress what still once, backup your entire site incase you need to restore. If you have created a "new site" and it will not part of the / ~ alpsf site, then you will need to define a new site and copy all the files in this folder (I'm guessing that this is the case). I copy the files outside Dreamweaver. You could do this without touching the files in the ~ alpsf directory. There are many variable here because I don't know exactly what you are doing.

  On the file menu select window/results-select search. (This is done if the search engine is not open).

  Find: all of the current Local Site

  Search: Source Code

  Search: "/ ~alpsf/".

  Replace: ' / '.

  That should do it, but it is a very delicate thing. I wouldn't have a problem doing this as long as I backed everything up.

  Jim

  Published: you will need to enter in your css, spry files and all others who has links to do the same (this time only select search in: current document when the document is open). Once this is done, delete the entire remote site and upload the changes once you check that everything is complete.

• Programmatic access to remote files via VPN on Playbook

  Hello

  It is technically possible to download remote files via VPN programmatically?

  I can't find any documentation on this topic.

  Thank you

  Oh, not... I don't think it's possible.

• How to implement a local SOA/BPM project using remote resources via VPN

  Hello world

  Sorry for the dummy question, but I am a beginner and I'm in trouble with this problem.

  This is the scenario: I have to carry a BPM project using JDev 11.1.1.7 on my local environment and then deploy them on remote servers via VPN where a development environment is configured.

  All services are on remote servers.

  My question is: what I put up in my local environment?

  1 DB connection (distance connettion)

  2 configuration of MDS to share components?

  3 WebLogic server?

  3. what else?

  Any link o idea to share?

  Thank you.

  Fairlie

  Hello

  If you need to deploy and test in your front room to deploy remotely, then you will need to set up all the people in your premises + SOA Suite... If you need to do is put on your local, but can check remotely, you only JDev and connections...

  See you soon,.

  Vlad

• Easy traffic between remote sites via Cisco VPN

  We have a Cisco 2921 router at Headquarters (Easy VPN Server) and deployed Cisco 887VA (EasyVPN - Extension of remote network) for remote offices using EasyVPN. We allow voice traffic and data via VPN.  Everything has been great to work until this problem has been discovered today:

  When a remote user behind Cisco 887VA calls another remote user also behind Cisco 887VA, the call connects and Avaya IP phone rings but no voice in both feel.

  Calls from Headquarters and external mobile/fixed are very good. Only calls between two remote sites are affected.

  There is no need for DATA connection between the remote desktop, our only concern is the voice.

  By the looks of it, I think that "hair - pinning" traffic on the interface VPN is necessary. But need some advice on the configuration. (Examples configs etc.).

  Thanks in advance.

  Thanks for your quick response.

  I am sorry, I assumed that the clients have been configured in client mode.

  No need to remove the SDM_POOL_1, given that customers already have configured NEM.

  But add:

  Configuration group customer isakmp crypto CliniEasyVPN

  network extension mode

  You are able to ping to talked to the other?

  Please make this change:

  105 extended IP access list

  Licensing ip 192.168.0.0 0.0.0.255 192.168.0.0 0.0.0.255

  * Of course free to do trafficking of translated on the shelves.

  Let me know if you have any questions.

  Thank you.

  Portu.

• Is access to the DMZ on VPN best practices?

  Hello

  We have aDMZ which hosts comments wireless society and also installed on the same network of network security cameras. We must be able to access these security cameras remotely (from office) and one way to do that would be to include a network DMZ on your remote access VPN access. I don't know if this is a good/best practices since the same DMZ network also called Wireless on it.

  I think that since the security/DVR cameras is something private, they should be moved inside the network instead of on the DMZ.

  Could you please comment and suggest?

  Thank you.

  Yes! Move the inside security cameras and create another guest lan, do not use the demilitarized zone for the guests!

  DMZ must expose several services outside.

• Cannot access remote network via VPN

  Hello

  I'm trying to set up a router vpn access to my office network. The router is connected to the Internet through using pppoe vdsl.
  There is also a public oriented Web server in the office which must be accessible.

  I can access the Web server from the Internet and the vpn connects successfully. I can also ping the LAN Gateway, however, I can't access all the local machines.

  I'm quite puzzled as to why it does not work. Please could someone help.

  The results of tests and the router configuration are listed below. Please let me know if you need additional information.

  Thank you and best regards,
  Simon

  1. routing on the router table
  Router #sh ip route
  Gateway of last resort is ggg.hhh.125.34 to network 0.0.0.0
  xxx.yyy.zzz.0/29 is divided into subnets, subnets 1
  C XXX.yyy.zzz.192 is directly connected, Vlan10
  GGG.hhh.125.0/32 is divided into subnets, subnets 1
  C GGG.HHH.125.34 is directly connected, Dialer0
  172.16.0.0/32 is divided into subnets, subnets 1
  S 172.16.100.50 [1/0] via mmm.nnn.ppp.sss
  S * 0.0.0.0/0 [1/0] via ggg.hhh.125.34

  2. ping PC remotely (172.16.100.50) local GW (172.16.100.1) successful
  > ping 172.16.100.1
  Ping 172.16.100.1 with 32 bytes of data:
  Response to 172.16.100.1: bytes = 32 time = 24ms TTL = 255
  Response to 172.16.100.1: bytes = 32 time = 10ms TTL = 255
  Response to 172.16.100.1: bytes = 32 time = 10ms TTL = 255
  Response to 172.16.100.1: bytes = 32 time = 11ms TTL = 255

  3. ping PC remotely (172.16.100.50) to the local server (172.16.100.10) failure
  > ping 172.16.100.10
  Ping 172.16.100.10 with 32 bytes of data:
  Request timed out.
  Request timed out.
  Request timed out.
  Request timed out.

  4. ping the router to the successful local server
  router #ping 172.16.100.10
  Type to abort escape sequence.
  Send 5, echoes ICMP 100 bytes to 172.16.100.10, wait time is 2 seconds:
  !!!!!
  Success rate is 100 per cent (5/5), round-trip min/avg/max = 1/1/4 ms

  5 see the version
  Cisco IOS software, software of C181X (C181X-ADVIPSERVICESK9-M), Version 12.4 (15) T1, VERSION of the SOFTWARE (fc2)
  ROM: System Bootstrap, Version 12.3 YH6 (8r), RELEASE SOFTWARE (fc1)
  the availability of router is 1 hour, 9 minutes
  System image file is "flash: c181x-advipservicesk9 - mz.124 - 15.T1.bin".
  Cisco 1812-J (MPC8500) processor (revision 0 x 300) with 118784K / 12288K bytes of memory.
  10 FastEthernet interfaces
  1 ISDN basic rate interface
  Configuration register is 0 x 2102

  6. router Config
  AAA authentication login default local
  connection of local AAA VPN authentication.
  AAA authorization exec default local
  local authorization AAA VPN network
  !
  !
  AAA - the id of the joint session
  !
  !
  !
  !
  crypto ISAKMP policy 1
  BA 3des
  preshared authentication
  Group 2
  !
  Configuration group customer isakmp crypto ASI_Group
  key mykey
  DNS aaa.bbb.cccc.ddd
  domain mydomain.com
  pool VPN_Pool
  ACL VPN_ACL
  !
  !
  Crypto ipsec transform-set esp-3des esp-sha-hmac TS1
  !
  crypto dynamic-map 10 DYNMAP
  game of transformation-TS1
  market arriere-route
  !
  !
  list of authentication of VPN client VPN crypto card
  card crypto VPN VPN isakmp authorization list
  crypto map VPN client configuration address respond
  card crypto 10 VPN ipsec-isakmp dynamic DYNMAP
  !
  !
  !
  IP cef
  !
  !
  !
  Authenticated MultiLink bundle-name Panel
  !
  !
  username admin privilege 15 password mypassword
  Archives
  The config log
  hidekeys
  !
  !
  !
  !
  !
  interface FastEthernet0
  WAN description
  no ip address
  no ip redirection
  no ip unreachable
  no ip proxy-arp
  no ip mroute-cache
  automatic duplex
  automatic speed
  PPPoE enable global group
  PPPoE-client dial-pool-number 1
  !
  interface FastEthernet2
  Description Public_LAN_Interface
  switchport access vlan 10
  full duplex
  Speed 100
  !
  FastEthernet6 interface
  Description Private_LAN_Interface
  switchport access vlan 100
  full duplex
  Speed 100
  !
  interface Vlan1
  no ip address
  !
  interface Vlan10
  Public description
  IP address xxx.yyy.zzz.193 255.255.255.248
  no ip redirection
  no ip unreachable
  no ip proxy-arp
  no ip mroute-cache
  !
  interface Vlan100
  172.16.100.1 IP address 255.255.255.0
  no ip redirection
  no ip unreachable
  no ip proxy-arp
  no ip mroute-cache
  !
  interface Dialer0
  IP unnumbered Vlan10
  no ip unreachable
  IP mtu 1452
  IP virtual-reassembly
  encapsulation ppp
  no ip mroute-cache
  Dialer pool 1
  Dialer-Group 1
  Authentication callin PPP chap Protocol
  PPP chap hostname myhostname
  PPP chap password mychappassword
  PPP ipcp dns request accept
  failure to track PPP ipcp
  PPP ipcp address accept
  VPN crypto card
  !
  IP pool local VPN_Pool 172.16.100.50 172.16.100.60
  !
  !
  no ip address of the http server
  no ip http secure server
  !
  VPN_ACL extended IP access list
  IP 172.16.100.0 allow 0.0.0.255 any
  !
  Dialer-list 1 ip protocol allow
  not run cdp
  !
  !

  Simon,

  Basically when you connect through a VPN Client PC routing table is updated automatically as soon as the connection is established. If you do not need to manually add routes. You can check this by doing a "route print" once you are connected.

  Ideally, you need to put your pool of VPN on subnet that does not exist on your physical network, the router would be to route traffic between the IP pool and internal subnet.

  Now, you said that you have a web server with a public IP address that you need to access through the VPN, that host also as a private IP addresses on the 172.16.100.0? If it isn't then the ACL that I proposed should work. If she only has a public IP then your ACL VPN address must have something like

  IP 172.16.100.0 allow 0.0.0.255 192.168.100.0 0.0.0.255

  219.xxx.yyy.192 ip 0.0.0.7 permit 192.168.100.0 0.0.0.255

  Who says the router and the client to encrypt all traffic between the subnets behind your router and your VPN pool.

  I hope this helps.

  Luis Raga

• Copy the VM on the ESX server @ remote site

  Need a virtual machine to copy to an ESX Server at a remote site. The remote site is on a WAN to 12 MB link.

  What would be the best way to get a copy of the virtual machine on the remote site?

  The virtual machine on the remote site is using local storage in its VMFS data store.

  Would this work.

  Orginal VM clone

  Unregister the Clone

  Copy all the files of the virtual machine to USB using FastSCP

  Download files of the virtual machine to the local VMFS data store

  Right-click VMX and click on add to the inventory

  Am I missing measures?

  If bandwidth is a problem, and your VMDK is thick provisioning, you can use vmware converter to convert format of vmware workstation in the USB, Converter it will be thin. and then reupload again via the converter when you're there. It could save you a few upload and download times.

  iDLE-jAM | SC 2, SC 3 & VCP 4

  If you have found this device or any other answer useful please consider useful or correct buttons using attribute points

• Access to the table of dynamic addresses via SNMP

  Hello

  I am trying to access the table of dynamic addresses via SNMP, with a PowerConnect 6248 switch. I tried to follow the instructions [1], as other parts of the BRIDGE-MIB are ok on this switch.

  When snmpwalk'ing BRIDGE - MIB:dot1dTpFdbEntry, I have nothing, while, on the switch web interface there are entries in the table.

  Any idea?

  [1] http://www.cisco.com/en/US/tech/tk648/tk362/technologies_tech_note09186a00801c9199.shtml

  
  

• Vpn client access to the DMZ host

  I'm having a problem where my customers who establish a VPN with Pix 515 cannot access hosts on the DMZ. VPN clients can access hosts inside network without any problems. I discovered that when I make a route to trace from a client computer that has established a VPN connection to a host on the DMZ, he tries to go through the default gateway of computers instead of the client from cisco. Any ideas?

  More information:

  When a client connects with the PIX over the VPN, it is given the internal DNS servers and the DNS Server internal, we have a host entry that says "www.whatever.com" 2.2.2.2 (this is the DMZ host). Customers within the network can access this host with problems, it's just the customers who establish a VPN connection. But the VPN Clients can access "www.whatever.com" using the public ip address. The problem is that if remove us the entry from the host on the DNS server so that the name of "www.whatever.com" decides the public ip address customers inside will not be able to access the DMZ host. The names and IP numbers are not real just using those as an example.

  Any help would be apperciated. Thank you

  You'll currently have something like this in your config file:

  sheep allowed ip access-list

  NAT (inside) 0 access-list sheep

  This tells the PIX not to NAT any traffic from inside interface, which is to go to a VPN client. You need the same thing but for the DMZ interface, then add the following:

  sheep allowed ip access-list

  NAT 0 access-list sheep (dmz)

  Who should you get.

• Restrict access to the network on 871 router via mac address

  Hello

  I have a Cisco 871 router and I am trying to allow only specific MAC addresses access to the network. Is there a way to specify that only specific MAC addresses are allowed to access? Any other MAC access will be denied?

  I can either have static IP or DHCP for local machines.

  Can I use this "secure DHCP IP address assignment" details found here... http://www.cisco.com/en/US/docs/ios/12_2t/12_2t15/feature/guide/ftdsiaa.html ?

  I use these...

  static Mac address table

  OR

  Security table of Mac addresses

  ... to achieve this?

  Thank you.

  You can use "mac-address-table static" If you know all the mac addresses that will be connected.

  If the router is by distributing ip addresses so you can indeed do secure IP DHCP address assignment.

  Note that you can make a 'mac access-list' switch and aplly in any vlan you want.

  Alternatively, you can do "dhcp snooping" allowing guests who got a dhcp ip addresses and are not identity theft.

  I hope it helps.

  PK

• Manage the 5512 ASA with SSH via VPN

  Hello

  We are facing problems with ssh access on our ASA5512 on a Site-2-Site VPN tunnel.

  SSH seems to be implemented properly, because we can login from inside and outside on both Interfaces.

  But when we try to connect the ASA from a remote location with SSH Putty reports a timeout.

  We set up a lot of these configurations with ASA5510 and ASA Image 8.x without any problem, so I guess it must have something to do with the new version of the ASA.

  The value by defect-rsa-key was generated successfully.

  VPN is ok and log viewer shows:

  6

  March 21, 2016

  10:21:44

  302013

  192.168.0.100

  51682

  192.168.1.1

  22

  Built of TCP connections incoming 597903 for outside:192.168.0.100/51682 (192.168.0.100/51682) at inside:192.168.1.1/22 (192.168.1.1/22)

  That's how we set up the configuration:

  the ssh LOCAL console AAA authentication

  SSH 192.168.0.0 255.255.255.0 inside (192.168.0.0 is the remote VPN network)

  management-access inside

  username privilege 15 PASSWORD USER password

  We missed something?

  Thank you

  Best regards

  Dennis

  Hi Dennis,

  The config looks very good.

  Are you able to ping inside the interface through the tunnel.

  If not can check you the nat for traffic and adds the route search key word.

  If you use not all certificates on the SAA you can use the command for related on the SAA rsa keys:

  encryption key tied rsa or try to be specific: related encryption rsa label key<>

  Try to remove the SSH configuration and reapply.

  I would like to know if it works or not. If this isn't the case, then take debug ssh 255 and part.

  Kind regards

  Aditya

  Please evaluate the useful messages.

• Ontario Regulation distributes dynamic routes via VPN S2S

  Hi halijenn / experts

  (1) please let me know if IPP works on a Site in tunnel

  (2) I have a behind remote ASA 10.10.1.0 and 10.10.2.0 network that must be distributed to another branch ASA with S2S ASA remote via OSPF

  3) there is an L3 Switch behind the ASA of the branch and Switch L3 there is a router that has a default route pointing router WAN

  Router WAN
  |
  |
  Users-> router-> L3 Switch-> ASA-> Internet-> remote ASA branch (10.10.1.0, 2.0)

  Note: 10.10.1.0 2.0 AND are already configured in the ACL Crypto at the ends.

  Users are able to reach the 10.10.2.X network to the remote end.

  Now for the 10.10.2.0 static routes are already there in the router and the switch finally pointing the ASA branch however as the network grows, it is impossible in the router behind the switch to add static whenever routes (such as the default route to router WAN points). This is why in order to learn routes dynamically, I will add an ospf process to the ASA to branch with the following configuration. Please let me know if iam correct when I add IPP and other OSPF commands to the ASA of the branch. (hope I have nothing to do on ASA remote associated with IPP or OSPF?)

  I take just an example of a remote host 1 10.10.1.4. Inside ASA interface leading to users is 172.16.1.0/24

  access-list redistribute allowed standard host 10.10.1.4 255.255.255.255

  router ospf 1
  network 172.16.1.0 255.255.255.0 area 0
  Journal-adj-changes
  redistribute static subnets redistribute route map

  In addition, I will also be allowing the order for IPP in the encryption of the VPN S2S said card.

  Please help me understand if I'm wrong

  Pls set the OSPF firstly on the SAA process before removing the static routes. Once you have confirmed that the OSPF is configured correctly and the roads are in the OSPF database, then you can delete the static routes. Static routes will always take precedence over OSPF because it has higher metric. Please keep the default route configured on the SAA.

  Hope that confirms it.