access to the network drive on XP vm & Mac host

Similar Questions

• Access to the network drive. Unable to drag files to USB

  I can see the files on the network drive, but when I try to drag the file to a USB drive it. He said that problem access the hard disk, but I can open the file on that...   Any ideas would be appreciated

  Hello

  1. What is the exact error message that you receive?

  2 have you tried copier\paste manually?

  I suggest copier\paste manually the files on the USB drive and check to see if the same problem happens.

  You can also check this link:

  http://Windows.Microsoft.com/en-us/Windows-Vista/enable-file-and-printer-sharing

  It will be useful.

• Restrict access to the network on 871 router via mac address

  Hello

  I have a Cisco 871 router and I am trying to allow only specific MAC addresses access to the network. Is there a way to specify that only specific MAC addresses are allowed to access? Any other MAC access will be denied?

  I can either have static IP or DHCP for local machines.

  Can I use this "secure DHCP IP address assignment" details found here... http://www.cisco.com/en/US/docs/ios/12_2t/12_2t15/feature/guide/ftdsiaa.html ?

  I use these...

  static Mac address table

  OR

  Security table of Mac addresses

  ... to achieve this?

  Thank you.

  You can use "mac-address-table static" If you know all the mac addresses that will be connected.

  If the router is by distributing ip addresses so you can indeed do secure IP DHCP address assignment.

  Note that you can make a 'mac access-list' switch and aplly in any vlan you want.

  Alternatively, you can do "dhcp snooping" allowing guests who got a dhcp ip addresses and are not identity theft.

  I hope it helps.

  PK

• Access to the network bridge works do not (Linux host & comments)

  I am running VMware Player 3.0.1 on Fedora Core 10. (I know this is not one of the host of the OS supported; could this be the problem?)

  I built a virtual machine with a virtual adapter connected by a bridge and am under Fedora Core 10 also in the virtual machine. The virtual machine does not have any network access.

  I followed all the advice of troubleshooting to the Knowledge Base article 1008367 (at http://kb.vmware.com/selfservice/microsites/search.do?cmd=displayKC & docType = kc & externalId = 1008367 & sliceId = 1 & docTypeID = DT_KB_1_1 & dialogID = 77717080 & stateId = 0% 200% 2077715760) does not.

  On the Linux host, vmnet-bridge is running.

  / dev/vmnet0, / dev/vmnet1 and/dev/vmnet8 all exist.

  However, the Configuration GUI network (under GNOME) lists vmnet1 material devices, vmnet8, eth0 (it's my actual physical network interface), and the so-called pan0.

  On the virtual machine, I think I have configured the network correctly.

  ping an address on my LAN IP said "the network is inaccessible." (The same ping succeeds on the host).

  Clues to understand why the network access doesn't work?

  Ok

  Start by checking that the Fedora 10 vNIC is connected on the audit: VM configuration-> network adapter Bridge-> Connect at power on (must be verified).

  So when the guest of Fedora 10 begins the vNIC should be upward.

  If the eth0 is not upward, you should be able to install and configure then. You can search on the net how to set up the network on a host of Fedora 10. I recommend that you use just the console text to do so.

  Don't forget to configure fedora network depending on the configuration of your LAN (static or dhcp).

  Let me know if it works or not

  Best wishes / Saludos.

  Pablo

  Please consider providing any useful answer. Thank you!! - Por favor considered premiar las useful responses. ¡¡MUCHAS gracias!

  Virtually noob blog

• Cannot access the network drive or impossible to mount the network drive. Error "network path was not found.

  Original title: network path was not found

  HI, after the upgradation from windows xp sp2 to sp3 (next to the customer) I can't access the network drive or impossible to mount the network drive. ' ' It showa error "network path was not found.

  Hi gauravadavadkar,

  Thanks for posting your query in Microsoft Communities. Provide the following information:

  ·         Did you do changes on the computer before the show?

  ·         What is the full error message?

  ·         Work on a domain?

  Follow these methods.

  Method 1: Temporarily disable the security software.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: Follow these steps:

  Step 1: Start the computer in safe mode with networkand check if the problem persists.

  S tep 2: if the problem does not persist in safe mode with networking, perform a clean bootto see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow the steps to configure Windows to use a Normal startup state section of the article to start the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Startand then click run.

  (b) type msconfigand click OK.
  The System Configuration utility dialog box appears.

  (c) click on the general tab, click Normal Startup - load all device drivers and services, and then click OK.

  (d) when you are prompted, click restart to restart the computer.

  Method 3: Follow the steps in the article.

  How to troubleshoot a network home in Windows XP

  In Windows network connection issues

  You can read this article for more information:

  Windows wireless and wired network connection problems

  I hope this helps. Let us know if you need more assistance.

  Thank you.

• How to get permission to write to the network drive access?

  I installed a reader Networks to connect it to my router. It works very well for retieving files, but I can't write to it. I get a message saying "You must." authorized to perform this action

  Samsung computer laptop brand new, 6 GB RAM, CPU Intel Sandy Bridge, E4200 of Cisco router wireless.

  Everything works fine, except my network (3 sheets) drive. I find it impossible to write to it in WIndows Explorer. I can, however, open any type of file off the drive.

  I want to back up my computer to the hard drive, so please HELP!

  Hello

  You can check out the link below and provide a complete control on the network drive.

  What are the permissions?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-permissions

  Troubleshoot "access denied" when opening files or folders

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-access-denied-when-opening-files-or-folders

• Access to the hard drive USB network - WAG310G

  Hello.. I have a 500 GB USB hard drive attached to my WAG310G, but it can be accessed from the network. IM using XP Pro.

  Someone suggested to go to start / run and typing \\192.168.1.1\, but I just get an error "the network not found path.

  This seems to be a really hard to find an answer, because I can't find any help on the internet either.

  Help, please!

  See / Kevbb.

  I think that you do not have the possibility to access the drive on the network, but you can use the interface of the router to store your entire network on the USB connected to your router.

  If you have DDNS service, you can manage the storage device using the WAN IP address. To enable WAN HTTP access, you must enable remote access on the Administration > management screen and disable the firewall on the security > firewall screen.

• The user read/write register access to the network folder/drive. Some users unable to save or write to the directories.

  I have three users who have no problem with read/write & record readers records secure network access. I have two users who can read some files and save in some files, but cannot save or access certain folders even after receiving full access read/write for all files in the network drive. Help, please. The computers running Vista Ultimate and server access to Windows Server 2003. Thanks for your times * address email is removed from the privacy *.

  Problems related to access to the files on a server networked in a business environment are a produce little for Windows answers Forum.  I recommend you repost the question either in the Technet Forum to the:http://social.technet.microsoft.com/Forums/en-us/winserverfiles/threads orhttp://social.technet.microsoft.com/Forums/en-us/itprovistanetworking/threads.

  I don't know that someone there can help you.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I can't use windows Explorer or the network drive mapping to access my NAS drive more.

  original title: strange NAS problem

  Hi everyone I can't seem to fix this strange problem.

  I can't use windows Explorer or the network drive mapping to access my NAS drive more.
  I am running windows 7 Professional 32-bit on my PC, and until about a week ago she accessed from my PC very well.

  The location could not be reached and have not been able to run since said today that I went to update it and the drive mapped. I'm at my wits end.

  Here is some info.

  I can access to other computers and devices on my network.

  I can access the internet.
  I have a windows XP PC in the House who can always connect to my fine NAS drive (even if it's not mine).
  I PING the NAS drive.
  The NAS drive will do the same if connected via cable or by wireless.

  UPDATE: after the implementation of a shared folder on a Windows XP computer on the same network I am also unable to acsess the part of my PC. So I can assume that I can't browse all share folders or NAS drives on my local network.

  Help, please.

  Thanks for the help, but I fixed my problem

  Here's what I did in case anyone wants to know.

  I went into Device Manager and went to network adapters.
  I then expanded this section and under view changed to display hidden items.
  Several hundred elements appears (for most 6to4 adapters) and I deleted all the.
  Then click scan for new hardware.
  And... everything works again! YAY!

• Can't deleted iPhoto Library the network drive backup

  I made a backup of my library iPhoto on a network drive. Since then, I realized Time Machine made a better job of backing up my iPhoto library. So I planned to remove the library for free space.

  When I try, I get this message:

  "The operation cannot be performed because you have not granted access to some of the elements."

  If I can spend in the library and digging around, I find there are hundreds, maybe thousands of articles where I don't have permission. Y at - it a way to replace that can simply remove the library?

  Which does not imply iPhoto somehow - maybe you can get help from the forum for your operating system, but most likely, you need support from the supplier of the network drive - this is the question is

  I would ask that your post moved to the captain El forum and see if some one can help

  LN

• Adapter LAN question, "no access to the network.

  Original title: LAN adapter issue

  Hi all, when connecting my laptop to a switch of the LED on the switch is green which means connected. The IP address on the laptop is entered manually, but when will the cmd and issue ipconfig it shows "media disconnected" and the network adapter in the Control Panel indicates "no access to the network. It also indicates that "this device is working propoerly! Please advice

  Hello

  What is the number and the model of the computer?

  Remember to make changes to the computer before the show?

  Thanks for posting in Microsoft Communities.  The problem description, I understand that you can not connect to the Internet.  Correct me I misunderstood the question

  Follow these steps:

  Method 1: Follow these steps:
  How to troubleshoot possible causes of Internet connection problems in Windows XP: http://support.microsoft.com/kb/314095

   

  Method 2: Follow these steps:

  
  Step 1: renew DHCP Dynamic Host Configuration Protocol)
  a. click Start, click run, type cmd and click OK.
  b. in the command prompt, type ipconfig / renew
  c. Close command prompt.
  d. check the result.

   

  Step 2: Try to obtain an IP address automatically
  a. open Internet Explorer, go to Tools, click on Internet Options, connections, LAN settings.

  b. uncheck all boxes except automatically detect connection settings
  c. click OK to apply the changes.
  d. check if the problem persists.

   

  Method 3: If the methods above do not help, check if the wireless card is very well and try to update the drivers on the manufacturer's Web site.

  a. click Start and right-click my computer.
  b. Select Properties and then click the hardware tab.
  c. click on Device Manager and expand network adapters in the list.
  d. right click on the adapter, then click Properties.
  e. click the driver tab and click Update the driver.

  Please follow the steps and let us know if this helped.  If the problem persists, answer and we will be happy to help you.

• Store music on the network drive?

  I am considering a Director to play my music (mp3) stored on a shared network (NT) drive library. The Director can access music stored on the network drive and not on a PC? I don't want to have the PC on when I listen to music. The media to be installed and running server software need a PC for the Director to work? or the Director can access \\DRIVE\DIRECTORY?

  Thank you.

  Ah, so you're saying the multimedia files are on the USB drive connected to your WRT610N? If so, then you don't need a computer or power from the router itself already has a built-in Media Server (Twonky Media Server), which can share the multimedia files on the USB drive to your network.

• "No access to the network" problem in Windows 7 and error message "your computer seems to be correctly configured but the device or resource (DNS SERVER) is not responding."

  Hello, I have a desktop PC and a laptop (DELL Inspiron N-4050).
  I have problem with my internet connection cable which is working fine on my PC, but does not not on my laptop giving an error "no access to the network.

  When I troubleshoot it says "your computer seems to be correctly configured but the device or resource (DNS SERVER) is not responding."
  I said to many technicians of microsoft online response, but they could not solve my problem and said this is my DNS problem and advised me to contact my Internet service provider. Guess it's because of my internet so why it works on my PC not on laptop?

  Yesterday, my ethernet cable pulled out my cell phone and I couldn't connect to the internet more. But on my desktop PC, it works perfectly fine. (I do not use wifi, if this information is also required) I have studied several threads with similar situations, and I have tried different methods to solve the problem to no avail. I did a system restore, but I'm having no luck. Also, I did not of the latest changes with my anti virus software and my LAN card drivers look to date.

  When I remove my cable from the laptop and again connect my cable then it works but only after the PC sat for awhile.
  1.I did flush DNS by typing "ipconfig/flushdns" in the command prompt.
  2. my IP address, DNS, subnet mask etc are set to automatic.
  3.I also added physical address taken from command line giving "ipconfig/all". for the properties of the network driver settings.
  4.I ' installed the drivers to date of 2014 on my laptop.
  5.I did a lot of searching the web, but they do not solve my problem.

  Please help me to solve it.
  I appreciate your help.
  Thank you.

  Hello Hall,

  Please keep us updated on the status of the issue.

  I suggest you to follow the steps in this Microsoft article troubleshooting and check if it helps:

  Error message "your computer seems to be configured correctly, but the device or resource (DNS server) is not responding" in Windows 7

  http://support.Microsoft.com/kb/2779064/en-us

  Hope the helps of information.

  Please reply with the results, in order to help you solve the problem.

  Thank you

• LATITUDE DE820 wiped out loaded XP drivers DELL & SW, no access to the network

  Everyone out there - I need HELP... I bought a second hand LATITUDE DE820 with Windows 7 above and it worked fine (also WIFI). I need to load XP Prof on it (Yes...) and therefore all DELL SW disappeared (had no CD DELL) that I loaded package XP 3 Service that I plugged in Ethernet, but I also have a WLAN - but NO communication to all NETWORKS. Ping an IP address any LAN brings 'Host unreachable' IPConfig/all shows: IP of Windows host Setup...: laptop Prim. DNS: Enter Mode: Broadcast IP routing enabled: No. WINS Proxy enabled: Ethernet adapter without Bluetooth network connection: media state: media disconnected Description: peripheral physical addr Bluetooth (Personal Area Network): Mac addr. Control Panel-> network connections displays LAN at the Connecticut 1394 network adapter (properties: peripheral works properly, driver: MS 07/01/2001!) Connection status: connected but 0 packet protocols: f. Client Microsoft NW File & Printer sharing TCP - IP - trying to hit the repair-> msg "TCP/IP not enabled for this connection") Conclusion: I think that my XP drivers are too old, or not DELL problem: I have no access to the network - minimum need drivers update for access to Internet, and then upgrade to download that/those pilot on a Non-Dell PC then CD, then install on the laptop don't know DELL HW, used Service tag to find 11 drivers, drivers resp. 75 for that I think it's a driver of 'network' - but don't know what or any other suggestion? Thks for any help Peter

  Well well maybe it was because I realized that I needed to insert HTML
  to get my text with line breaks.
  But in any case the problem is solved by support group European German DELL who responded very quickly by there DELL Forum and help me great to go again. Thank you DELL-Dave S.
  Problem solved by:
  followind drivers downloaded from the CD, and then installed on D820
  WLAN: HTTP://WWW.DELL.COM/SUPPORT/DRIVERS/DE/DE/DEBSDT1/DRIVERDETAILS/PRODUCT/LATITUDE-D820?DRIVERID=R257701&OSCODE=WW1&FILEID=2731111614&LANGUAGECODE=DE&CATEGORYID=NI.
  LAN: HTTP://WWW.DELL.COM/SUPPORT/DRIVERS/DE/DE/DEBSDT1/DRIVERDETAILS/PRODUCT/LATITUDE-D820?DRIVERID=04VK6&OSCODE=WW1&FILEID=2731090506&LANGUAGECODE=DE&CATEGORYID=NI.
  Now using Ethernet and wireless network worked with access to the network, all the others downloaded drivers from the net.
  Viva

• The file on the network drive management home

  My Win 7/64 Pro is connected to our home network, that has a Maxtor drive.  If I use my PC to edit the files and folders on the network drive, the changes do not appear on the other computers on the network.  I am the only user on my 7 box and have administrator privileges.  How to fix this?

  Hello

  I suggest to follow the steps provided and check if it helps.

  Method 1: Open the troubleshooter group living

  http://Windows.Microsoft.com/en-us/Windows7/open-the-HomeGroup-Troubleshooter

  Method 2: Make sure that network discovery is enabled on the computer. Access the link below and follow the steps described in the article and check if it helps to solve the problem.

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-other-computers

  Hope this information is useful.