Accessibility.blockautorefresh on mobile

Similar Questions

• HotSpot has been the top but cannot access internet on mobile.

  I use hp probook. I've set up point by using hotspot Wi - Fi hp and wifi is also appering on my mobile on and correctly connected to it also, but when I access internet on my mobile page does not open. It sticks on loading.pls tell me what to do.

  Hello @amritansh 
  
  To get your question more exposure I suggest you post in the trade forums since the HP ProBook is a commercial product. You can do this here laptop - HP ProBook, EliteBook, Compaq, slate/Tablet PC, Armada, LTE
  
  I hope this helps!
  
  Thanks for posting on the HP Forums.

• Access to the mobile phone HTC WIFI problem

  Hello

  We have Cisco LAP wireless environment, The WLC is WISN (software version is 7.0.98.0), access point is Cisco 1142. We have a user with HTC mobile phone (OS is Android 2.2) can not access the WLAN (WEP key + WEB-based authentication), it must take a lot of time to get the IP address or IP address cannot be obtained. Is there someone have similar problem?

  Best regards

  Jackson Ku

  Glad to know that it works...

  At first I don't think that the problem was the device but conffigured load balancing...

  Well, since you wanted to have certain amount of units in the network, by AP.  If this limit is reached by the AP, brand-new answer association will respond with code 17 the customer tell "hey dude, im complete, look for a different access point", is the customer later new which either decides if he get another one or continues to try to associate with the access point in the box...

  This feature can be used in order to customers balance the load through towers on a single controller. Customers choose the AP based on the client to report Signal to noise (SNR) in this AP and the window of the load balancing.

  Dynamic balancing works in the link phase. If active and the conditions to balance the load, when a wireless client attempts to join a TOUR, association executives of response are sent to the customer with a package of 802.11 response that includes the code of State 17. This code indicates that the PA is too busy to accept any associations.

  It is the responsibility of the customer to honour, process or ignore this frame of response association with reason code 17. Some clients to ignore it, even if it is part of the 802.11 specification. The standard requires that the client driver must seek another AP to connect to since he receives a 'busy' of the first AP message he's trying. Many customers do not do this and send it to the request of the association. The customer in question is allowed on the network wireless during subsequent attempts to associate.

  The controller sends a response with reason code 17 association frame to the client. If the customer decides to ignore the reason code 17, the customer can try the same AP again and this time the PA allows the customer to complete the association.

  If the customer meets the association 17 response status code, the client then tries to associate with a different access point. For example, if balancing is activated and the window of load balancing is configured as five customers, when a sixth client tries to associate to the AP, the client receives a frame of response of the 802.11 Association with 17, status code that indicates that the AP is busy.

  Here is the link on how it works...

  http://www.Cisco.com/en/us/products/ps6366/products_tech_note09186a00809c2fc3.shtml

• Access to the mobile site of Muse with mobile phone problem

  I've added a site to phone on a destop via Muse CC 2014.2.1.10 site.  When downloaded in Business Catalyst, the browser site works perfectly, but the site of phone cannot be previewed with any mobile device.  "office redirection" is checked in the site properties dialog box.  The phone always displays the site Office.  How can I fix this?

  Hello

  I checked the URL provided by you and I can confirm that his phone Site redirection. I checked this on iPhone and Android device as well.

  Please check this on any other device other than the one you are using. You can also install another browser in the affected device and try again.

  I'm sure it's a specific problem with the unit.

  Concerning

  Vivek

• Camera shows distortion tint/color pink when you access in Flex Mobile Application on Android

  Hi all

  I use Flash Builder 4.5.1 and test capabilites camera using simple super code just to see that it works, but I have enctountered a bug I can't fix.

  Description of the bug

  When I debug on the desktop using the webcam everything works fine, but when I test my application on a Samsung Galaxy S2 (Android) the colors of the image are distorted - all the bright colors have a pinkish tint.

  • The problem occurs in when you debug and when running a build of the final version.
  • I set the permissions of camera for the project.
  • The unit works fine when tested in the native application of camera of the device.

  The application code

  It's all of my application code:

  <?xml version="1.0" encoding="utf-8"?>
  <s:Application xmlns:fx="http://ns.adobe.com/mxml/2009"
                                   xmlns:s="library://ns.adobe.com/flex/spark"
                                   xmlns:local="*"
                                   xmlns:assets="assets.*"
                                   applicationDPI="240" xmlns:mx="library://ns.adobe.com/flex/mx"
                                   creationComplete="init()">
            <fx:Script>
                      <![CDATA[
                                import mx.core.UIComponent;
                                import mx.events.FlexEvent;
    
                                protected function init():void
                                {
                                          var camera:Camera = Camera.getCamera();
                                          if(camera)
                                          {
                                                    var ui:UIComponent = new UIComponent();
                                                    var video:Video = new Video(320,320);
                                                    camera.setMode(320,320,24);
                                                    video.attachCamera(camera);
                                                    ui.addChild(video);
                                                    cameraGroup.addElement(ui);
                                          }
                                }
    
                      ]]>
            </fx:Script>
            <s:Group id="cameraGroup" width="320" height="320" />
  </s:Application>
  
  

  Example of bug (screenshot taken of Android device)

  
  

  Anyone know how to fix this? Help !

  Thank you!

  I have attached, just update your version of adobe air (on computer and Galaxy) 3.0

• Mobile network will not access blackBerry Z10 Z10

  Hello world.
  
  My Z10 100-1 STL gives me an option to switch on the mobile network (his protégé). Airplane mode is disabled.
  
  When I go into the settings of the Sim Card, the phone doesn't detect the Sim Card. I use a micro sim card.
  
  I did a battery pull, removed the SIM and again left the battery of the phone for a while because it is also very hot and not load completely, but when I put the battery on, there is still no access to the mobile network. I can't make any calls at all.
  
  Help, please!
  
  K.

  KeH406 wrote:
  Hello.

  Thanks for the reply.
  The phone is 1 year old. Bought new and he has never done this before.

  Is there anything specific on the phone download for example.

  My OS is 10.0.10.738
  I'm not on BIS or BES.

  Your operating system is very old.

  First, you need to upgrade the operating system to 10.2.1.xxxx, which will most likely solve the problem (s)

• 50.0 Firefox (Ubuntu LTS 16.04) bad redirects me to mobile link from my Bank (Chase) slipped detect my PC as a mobile device. How to fix?

  After connect with my username / password for my online banking credentials, the browser redirects me as a mobile device to my PC. I called chase customer and assured me that it is a browser problem because I was able to access the office chase Web site to connect. Also, I could so successfully access the Web site of the complete Office only a few hours ago. I don't know what has changed since then. Help, please!

  The application databases

  Name: Firefox Version: 50.0 Build ID: 20161114144739 User Agent: Mozilla/5.0 (X 11; Ubuntu; Linux x86_64; RV:50.0) Gecko/20100101 Firefox/50.0 OS: Linux 4.4.0 - 47-generic Multiprocess Windows: 0/1 (disabled by modules) Safe Mode: false

  Reports of incidents for the last 3 days

  All Crash reports

  Extensions

  Name: Application Update Service Helper Version: 1.0 Enabled: true, ID: [email protected]

  Name: Staging of multiple process deployment Version: 1.5 Enabled: true, ID: [email protected]

  Name: Pocket Version: 1.0.5 Enabled: true, ID: [email protected]

  Name: Ubuntu changes Version: 3.2 Enabled: true, ID: [email protected]

  Name: Web Compat Version: 1.0 Enabled: true, ID: [email protected]

  Graphics

  Compositing features: Based asynchronous Pan/Zoom: no Renderer WebGL: Intel Open Source Technology Center - Mesa DRI Intel Sandybridge Mobile WebGL2 Renderer: (no info) decoding H264 hardware: No. Audio Backend: pulse Active #1 GPU: yes Description: Intel Open Source - Mesa DRI Intel Sandybridge Mobile Vendor ID Technology Center: Intel Open Source Technology Center Device ID: DRI of Mesa Sandybridge Intel(r) Mobile driver Version : Mesa 3.0 11.2.0

  Diagnostic AzureCanvasAccelerated: 0 AzureCanvasBackend: skied AzureContentBackend: AzureFallbackCanvasBackend Cairo: no CairoUseXRender: 0 Log HW_COMPOSITING decision: blocked by default: blocked by platform OPENGL_COMPOSITING acceleration: not available by default: material composition is disabled

  Important change preferences

  Accessibility.blockautorefresh: true accessibility.typeaheadfind.flashBar: browser.cache.disk.capacity 0: browser.cache.disk.filesystem_reported 358400: 1 browser.cache.disk.hashstats_reported: 1 browser.cache.disk.smart_size.first_run: false browser.cache.disk.smart_size.use_old_max: false browser.cache.frecency_experiment: browser.download.importedFromSqlite 3: true browser.download.useDownloadDir: false browser.places.smartBookmarksVersion: browser.sessionstore.upgradeBackup.latestBuildID 8: browser.startup.homepage_override.buildID 20161114144739: browser.startup.homepage_override.mstone 20161114144739: 50.0 browser.tabs.remote.autostart.2: true browser.urlbar.suggest.searches: true browser.urlbar.userMadeSearchSuggestionsChoice: true dom.apps.lastUpdate.buildID: dom.apps.lastUpdate.mstone 20161025170400: 49.0.2 DOM.apps.Reset - permissions: true dom.mozApps.used: true dom.push.userAgentID: e753f1e29adc43eaa2dc33a3c4ff7999 extensions.lastAppVersion: 50.0 font.internaluseonly.changed: false media.gmp - gmpopenh264.abi: x86_64-gcc3 media.gmp - gmpopenh264.lastUpdate: media.gmp 1471540750 - gmpopenh264.version: 1.6 media.gmp - manager .buildID: media.gmp 20161114144739 - manager .lastCheck: media.gmp.storage.version.observed 1479616148: 1 media.webrtc.debug.aec_log_dir: media.webrtc.debug.log_file/tmp: /tmp/WebRTC.log network.cookie.prefsMigrated: true network.predictor.cleaned - up: true places.database.lastMaintenance: places.history.expiration.transient_current_max_pages 1478625891: plugin.disable_full_page_plugin_for_types 79943: plugin.importedState application/pdf: true print.print_bgcolor: false print.print_bgimages: false print.print_duplex : 0 print.print_evenpages: true print.print_in_color: true print.print_margin_bottom: print.print_margin_left 0.5: 0.5 print.print_margin_right: print.print_margin_top 0.5: 0.5 print.print_oddpages: true print.print_orientation: 0 print.print_page_delay: 50 print.print_paper_data: 0 print.print_paper_height: 11.00 print.print_paper_name: na_letter print.print_paper_size_unit: 0 print.print_paper_width: 8.50 print.print_scaling: 1.00 print.print_shrink_to_fit : true print.print_to_file: false print.print_unwriteable_margin_bottom: 56 print.print_unwriteable_margin_left: 25 print.print_unwriteable_margin_right: print.print_unwriteable_margin_top 25: 25 security.ssl.errorReporting.automatic: true services.sync.declinedEngines: services.sync.engine.prefs.modified: false services.sync.lastPing: services.sync.lastSync 1479609024: Saturday, November 19, 2016 21:17:04 GMT - services.sync.numClients 0800 (PST): 2 storage.vacuum.last.index: 1 storage.vacuum.last.places.sqlite: 1478625891

  Important preferences locked

  Places database

  JavaScript

  Incremental GC: true

  Accessibility

  Enabled: false prevent accessibility: 0

  Versions of the library

  Minimum version expected NSPR: 4.12 Version used: 4.12

  Minimum version should NSS: 3.26.2 Version used: 3.26.2

  Minimum expected version of NSSSMIME: 3.26.2 Version used: 3.26.2

  Minimum expected version of NSSSSL: 3.26.2 Version used: 3.26.2

  Minimum expected version of NSSUTIL: 3.26.2 Version used: 3.26.2

  Experimental features

  Sandbox

  Seccomp-GMP (call filtering system): true synchronization of Thread Seccomp: true user Namespaces: true Media Plugin Sandboxing: true

  I note repeated mention of mobile in your chart. However, I don't see the changes to preferences that may be involved in this. I use Ubuntu 16.04, but very probably part of this problem is hardware related.

  Is the site

  • https://www.Chase.com/
    • Mobile https://www.chase.com/online/digital/mobile-banking.html

  I guess it is worth trying once signed on the modification of the URL in the bar to remove the /online/digital/mobile-banking.html or else address Firefox. (I don't know what the actual URL is that you will see)

  A most obvious potential solution is to clear the cache and Cookies for the site.

  • The hotkey Ctrl + F5 will replace any cached info
  • These instructions explain how to: delete cookies to remove the information from Web sites is stored on your computer_delete-cookies-for-a-single-site

  TAKE CARE alone do this whist you are trying to view information only not allowing transactions. Clear cookies sign almost certainly will sign if you are connected. So try initially while not connected, but you need to be connected to clear all cookies. Only all trying a day when you need to do something important, because you might temporarily lose access to the Bank's website and for example need your password reset.

  Have you tried another browser like chrome? If it works ok it proves that it is a matter of Firefox.

• Tethering with USB and reactive mobile questions

  I'm all new to android. I can't get my phone via USB to tie or to authorize my laptop work him as a mobile hot spot. I can see the phone as a mobile hotspot and the connection, but it won't let me access the internet. My laptop says that it is unable to acquire an IP address. Also, when I use USB it doesn't let me download the driver to use as a modem. Can someone tell me please in the right direction.

  Thank you!

  You can pay AT & t for hotspot access tie or mobile? It is a separate service.

• SIMM Mobile 4G: locked out!

  My HP Chromebook 14 just bought (with capacity of 4G) arrived yesterday and is working fine. So of course I had to try something that immediately work! (Well, not the works, in fact.)  The purchasing group includes 2 years of free access to the 4G mobile network (limited to 250 MB/month). Everything seemed to be activated from the moment that I inserted the SIMM card into the slot of edge designated. So far so good.

  But then THIS happened...

  By reading the configuration information for the access to the Mobile 4 G network, it is recommended to create a PIN code to restrict access to authorized users only. As I often work in public spaces, it seemed like a prudent idea. I started the process of setting up in accordance with the instructions and reached the point where it asks for the PIN code. Naturally, I assumed that it was a reference to a NEW PIN that I would. Not the case, unfortunately.

  Instead, the requested pin was one thing apparently had already been set. As a result, I received an error message that I had entered a wrong PIN code, and I had two remaining trials before the SIMM card would be disabled. I'm not a fool, so I immediately called the number of customer support for the mobile phone service provider (T-Mobile) and explained my situation. I had assumed that they will simply assign some kind of reset code or something... ANYTHING to help me to re - activate my mobile network access.  Unfortunately, it is not so simple.

  The T-Mobile person asked me my phone T-Mobile number, there is none which is a. I explained that I try to add a PIN code for my access to the 4G mobile computer and had been locked. She asked the model number of my T-Mobile Hotspot device. I explained that there is nothing, I don't have a from T-Mobile SIMM card that I inserted into my 4G compatible computer. Is not consistent with all existing concepts in its cognitive domain. After a few frantic seaching of its database, she suggested that I try to use the identification number of the PIN SIMM card. I have it done, but which also failed. I was now down to one remaining attempt. She said then that the PIN is apparently managed by the computer system, and that I need to contact the manufacturer of the computer.

  I then went through the help of the online system for the Chromebook, examined the activation process of the 4 G mobile wireless service and I tried a second number on the SIMM card. Not good. Card locked SIMM. This time the error message says I have 10 attempts to enter the right PIN code remaining, after what the SIMM card will be DEACTIVATED permanently!

  And then... here we are. Please PLEASE indicate how I do. There is no information in the user guide that is specific to the T-Mobile as the operator of mobile telephony (only Verizon and I've never heard of the other.)  T-Mobile seems to be clueless as to what I'm trying to do. I don't know who/what that is to control the security of the PIN, and I lose my line of life on every attempt segments. Help!

  Thanks for this info. After reading your reply and receive additional information from HP and Google, it was obvious that the question was indeed with the SIM card. more specifically, with the "pre-activation" of the factory. Once again, I contacted T-Mobile and reiterated the problem. This time around the Rep. from T-Mobile has determined that the SIM card only had never been set up correctly for acitivation once I received it with my Chromebook. A quick transfer to their Tech Support Dept. and we not to not process fairly quickly. It turns out that the SIM card number and the number of "PUK" were essentially what was needed after all. With this information and a right down here undocumented "phone number" assigned to the SIM card, I had everything that I needed to complete the activation process on the T-Mobile website. I guess that the representative of the customer service for my first call (without success) was not clear on what I need to do. But the good news is that I am running.

• question of 3102 - cell phone access

  Hello

  I think to buy a SPA3102 after seeing the reviews that you can access from a mobile phone or fixed.

  My wife's family is from abroad, and I want to use my Voip provider free international calls when she calls from his cell phone or his job.

  I want to check that it is compatible with the following scenario.

  I don't have any phone PTSN service.  I've only voip services.

  I have a voip with unlimited international calling service.

  Can I set up one of the ports on the 3102 with my current provider of voip and the second port of the provision on the 3102 to use another service of voip (such as gizmo5 etc...).  My wife would dial the number of the gizmo from his mobile phone, enter a PIN and be able to dial internationally via free international voip service?

  As an alternative, is anyway to do this with just the voip provider (and not to worry the second digit)?

  I just changed my current voip service because ATT cancelled CallVantage.  I'm not very happy with the service, but I chose because it was the only one with unlimited calling in South America and had the ability to dial an access number to call for free from a mobile phone.

  I'd rather have a new voip service which has better quality, even if they do not have cell phone access, if I can get access the 3102 celll.

  Thanks in advance.

  The SPA3102 cannot fill of voip-to-voip call.  It only helps fill a voip with a line call (port FXO) call RTC.  You can optionally use the SPA3102 to fill a call to another service of voip so you interface ata of the other service to the SPA3102 FXO port.  Even if you do this it is not quite optimal, and you might have problems.

  Some voip providers don't allow you to configure your own card and insist that you use a locked card they provide.  Others don't have this restriction.

  When South America with VoIP calling, you may experience some severe quality problems according to the voip provider and the provider that they use to deliver and to end the call.  Day of the week and the time of day can also make a significant difference.  This probably has something to do with the bandwidth available to the supplier in the long term for South America.

  A nice benefit of the SPA3102 is that you can configure up to four additional outbound-only suppliers on the adapter and it allows you to use additional providers PAYG (pay per minute) and have a choice on appeal.

  I would try different vendors for a sampling of the quality of the voice to the destination (s) require you to find the right combination of voice quality of cost vs.

  Four distribution providers (pay per minute) to check out are CallCentric, future-nine, CallWithUs and OneSuite.   Future - nine and Callwithus have different quality levels (roads of termination) that you specify when you call the number.

  Suppliers also have "access numbers" that you can call without having to use a PIN, even though some have more than others and with future-nine numbers, you can also access their "calling card" function through access SipBroker numbers. Access numbers are nice because you can use them without having a physical voip service.

  With CallCentric, you can also get a CallCentric DID (incoming number) and configure your own inbound number private as an access number.  CallCentric has also a few South Americans is that you can set as your own private access number...

• Access bursts using WCS

  Can someone specify exactly the mechanisam involved in the comments, access to the Internet?

  How ge automatically retrieves config settings like proxy address atc?

  'It depends' to use a quote from Neil Reid. You can set up guest access ways. Mobility anchor methd controller is one of the most commonly used. This requires you to configure a ssid of comments which uses a mobility anchor controller that resides outside the firewall. The traffic on this ssid joined the anchoring on a tunnel PAES mobility controller. See the Configuration guide for mobility anchor

  http://www.Cisco.com/en/us/docs/wireless/technology/guest_access/technical/reference/4.1/GAccess_41.html

  Yes, this requires a dedicated but controller the most effective method.

• BlackBerry Smartphones Blackberry 9700 - inability to access e-mail settings

  Hello - today, I had to change my password of e-mail on the server of Shaw as a spammer had diverted my address. I could not update the password of e-mail on my 9700. After clicking on the Setup icon, and then tap email, and then the option Internet e-mail account, nothing happens - I go back to the previous page. I tried to access to the
  mobile site. BlackBerry.com", as cool by a few others who have experienced this problem, but nothing helped. I keep to redirect to Canadian Blackberry mobile site, and there is no option to scroll down to a tab of Communication, etc. Anyone know how to fix this? I have not had any trouble to change the password in my ipad.

  Help!

  Another link to your phone's browser is www.blackberry.com/integrate

  Let us know if that helps you.

• Unique to the multiple SSID and possible access point single channel?

  Hello world.

  I have a silly question.

  Let say, we have three VLAN, vlan1, 2, 3 and they are mapped to the following wireless LANs:

  VLAN 1 ssid1

  VLAN 2 ssid2

  Vlan3 ssid 3

  AP - trunk - dagprogramm network.

  Our access point has mobile devices in three local wireless networks, IE ssid1ssid2 and ssid3

  Since the mode AP use half duplex, mobile devices need acknowledgement positive to ap they can send data, so once channel let channel 3 (assuming that 802. 11b is used) can be shared by all the devices in three local wireless networks.

  My understanding is correct?

  Thanks and a great weekend.

  An access point = an associated action related channel and each ssid and the customer that one channel and the AP is essentially as a hub

  concerning

  Joe

• Access blackBerry Smartphones to Mr. websites

  My "BOLD" will not provide access to the mobile sites from witn Mr. as Mr. google or m.blackberry. I get the number of error message 503 - Server is not available.

  ehindin wrote:
  ING www. non-mobile sites.

  Do not enter www. or http.

  for example in your BB browser, simply enter

  m.YouTube.com

  and nothing else.

• My Windows 7 PC does not access the internet and the IP Address of the local router

  My desktop PC gets internet access. She also cannot access my router (via IP address), although it shows a connection to the router in the network and sharing (correct network name) Center. The administration of the router shows in turn as connected desktop pc.

  I tried the following:
  -Restart the PC several times - no change
  -Reset my cable modem and router - no change
  -try to connect by using a wifi adapter - no connection
  -Try the windows network diagnostics - first "DNS server is not responding", now "broadband modem is known of connectivity issues.
  -use the same cable and port on the router with my laptop (also windows 7)-internet access works
  -internet access with my laptop via wifi - works
  -internet access with my mobile android (wifi) - works
  -check the settings of the router (my laptop has access) - everything is OK

  The problem must be in the system Windows 7 from my desktop PC.

  I hope you can help!

  P.S. I rebooted in "safe mode with network" and now got access to the internet. I just read about a problem with McAfee products and now running McAfee Virtual technician to see if it helps.

  P.P.S. McAfee virtual technician several questions and some of them, now, I have access to the internet (yay!), now upgrade from McAfee and hoping for the best.

  PPPS problem solved.
  Solution (was http://service.mcafee.com/FAQDocument.aspx?id=TS101446):
  -Restart the computer in safe mode with networking
  -go to mvt.mcafee.com and install McAfee Virtual Technician
  -run and repair
  -Restart
  -updating McAfee
  -run again the MVT (no problem found)

  You have McAfee? McAfee has been updated at the same time as the last batch of updates from Windows 7 and this is the cause of problems of internet connection for most, if not all, users of McAfee.

  See the communication from this "criticism" - McAfee

  Some customers may experience a loss of network connectivity and/or errors in McAfee Security Center after a recent update

  You should make the fix McAfee, if necessary. There are corresponding communications for their enterprise products.

  I had to run the removal of McAfee Development tool a few times before and it caused a problem with the license if the PC was not connected to the internet during the abduction. Due cat of McAfee support reset their files in order to allow the relocation-reactivation. Here is their link cat - McAfee - media contains the link to the cat