accident or error when burning

Similar Questions

• Problem with burning Audio files to a blank CD error "Windows Media Player encountered an error when burning. Check that the burner is connected properly and that the disc is clean and not damaged"

  I recently burned music CD blank so I can enjoy some songs in the car. After that a few discs engraved with success, I received the message "Windows Media Player encountered an error when burning. Check that the burner is connected properly and that the disc is clean and not damaged"when trying to burn audio. To see if it was the m drive, I tried to burn audio files to four separate discs and each of them had the error message. The discs are brand new and have no information on them. I do something wrong or is my burner disconnected? Thanks for all your help and your support! I hope that we can find the cause of this problem so I can continue to make the CDs.

  Consumers concerned,

  Cody bridges

  Could you also confirm that it is playing the discs ok?

  Run the sfc tool and see if it shows anything... instructions here.

  http://support.Microsoft.com/kb/929833/en-us

• Error message "windows media Player encountered an error when burning music" when burning audio

  Original title: try to burn an audio cd in windows media player-it begins but does not end the process. Help, please!

  try to burn an audio cd in windows media player. It prepares the ways, but when it is time actually burn the tracks, it fills all tracks very quickly and finalize. then the message appears that windows media player has encountered an error when burning music or that the burner is busy and to wait for the current task to finish. using an external burner, but it is properly plugged in and have not had any problems until recently. any suggestions would be greatly appreciated.

  Hi Ron,

  Welcome to the community Microsoft and thanks for posting the question.

  According to the description, you are having problems with the error message"windows media Player encountered an error when burning music"when burning audio CDs.

  Method 1: Use the Troubleshoot utility to see if that fixes the problem.

  a. open the Troubleshooting Windows Media Player settings Troubleshooter by clicking the Start button, and then click Panel.

  (b) in the search box, type "Troubleshooting" and then click on troubleshooting.

  c. click on show alland then click the Windows Media Player settings.

  Method 2: Select a recording speed (write) more slow for the CD burner.

  Change settings for burning a CD or DVD in Windows Media Player

  http://Windows.Microsoft.com/en-us/Windows7/change-settings-for-burning-a-CD-or-DVD-in-Windows-Media-Player

  Method 3: If you have any third-party burning software, I suggest you temporarily Uninstall it and then try to burn the disc using Windows Media Player.

  Note: Reinstall the software after the trial.

  Answer to us if you are having problems with burning audio disc or any other issue of Windows, and we would be happy to help you.

  Good day!

  Hope this information helps.

• "Cyclic redundancy error" when burning a rewritable CD (CD - RW)

  original title: error cyclic redundancy when burning to a Cd RW

  During the collection of material in alphabetical order from my hard drive to a Cd-RW, I had no problem until I got to the section 'P '.  I could not copy all of the files after that.  First error: "unable to read the file or disk.  To try again, I received the error code "cyclic redundancy error".  What should I do?

  Hi GeorgiaWR,

  Control of cyclic redundancy or CRC errors, usually occur when copying data to a CD or DVD. The error may indicate a bad block, a damaged disc or a hardware problem.

  You can read the following article and check:

  Your CD or DVD drive cannot read or write media

  http://support.Microsoft.com/mats/cd_dvd_drive_problems

  Also, try to use another disk and check.

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer

• Unspecified error when burning DVDs with windows media player DVD is empty when starting get coded, then when control burn error occurs and does not burn the disk. How to fix this?

  I get an error when I burn DVDs with windows media player. He asked correctly when I lad the DVDs that I choose to burn a dvd disc. Then I add my video fles she adds and lists. Then I hit burn and it starts to create the dvd disc. All my files are wmv files. The bar regarding % moves to 100% but captured along with burning the disc, he rejected and I get an unspecified error message. with just a button to hit, which will close the error box. The files don't burn the disk accordingly. The disc remains empty.

  Hi N2tjq,

  Are a. When you facing this problem?

  B. is - what happens with all DVDs?

  C. recent changes made on the computer?

  I firstly you suggests to save the project to your computer, and then try to burn on a DVD at a slower burning speed.

  Choose a speed slower burn to your DVD recorder as follows:

  1 back to adding photos and video to the DVD page and then click on Options.
  2. in the DVD burner speed box, select medium or slow.
   
  Change-Windows-DVD-Maker-DVD-Video-settings
  http://Windows.Microsoft.com/en-us/Windows-Vista/change-Windows-DVD-Maker-DVD-video-settings

  If the problem persists, download the service pack 2 for windows vista on the computer
  How to obtain the latest Windows Vista service pack
  http://support.Microsoft.com/kb/935791

  See the link below:

  Error message when you try to publish a movie to a DVD using Windows DVD creation in Windows Vista: "unspecified error".
  http://support.Microsoft.com/kb/949281 
   
  For more information, please see the links below:

  Burn a DVD video disc
  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-DVD-video-disc

  Troubleshoot-problems-with-creating-a-DVD-Video-using-Windows-DVD-Maker
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-creating-a-DVD-video-using-Windows-DVD-Maker

  If you use windows media player, see the link below:
  Burn-a-CD-or-DVD-in-Windows-Media-Player
  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD-in-Windows-Media-Player
   
  Previous post: the result.

  Bindu S - Microsoft Support

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Problem with "unknown error" when burning DVD

  I'm having problems to burn a DVD after manufacturing and save the file to Windows Live Movie maker, I am trying to burn the DVD and it takes forever to get to 83,0% and stops before burning.  99%, stops the burn and I get an unspecified error.  I'm not very technical, trying to correct this error, please do it fast and easy for fix me!  Thank you

  Hi Ronda, P

  Welcome to the Microsoft answers site!

  (a) edition of windows vista you run on the computer?

  (b) how exactly you are trying to burn the DVD? What file format you are using?

  I firstly you suggests to save the project to your computer, and then try to burn on a DVD at a slower burning speed.

  Choose a speed slower burn to your DVD recorder as follows:

  1. return to the page Add images and videos on the DVD and then click on Options.

  2. in the DVD burning speed box, select medium or slow.

  Change-Windows-DVD-Maker-DVD-Video-settings

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-Windows-DVD-Maker-DVD-video-settings

  If the problem persists, download the service pack 2 for windows vista on the computer

  How to obtain the latest Windows Vista service pack

  http://support.Microsoft.com/kb/935791

  See the link below:

  Error message when you try to publish a movie to a DVD using Windows DVD creation in Windows Vista: "unspecified error".

  http://support.Microsoft.com/kb/949281

   

  For more information, please see the links below:

  Burn a DVD video disc

  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-DVD-video-disc

  Troubleshoot-problems-with-creating-a-DVD-Video-using-Windows-DVD-Maker

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-creating-a-DVD-video-using-Windows-DVD-Maker

  If you use windows media player, see the link below:
  Burn-a-CD-or-DVD-in-Windows-Media-Player http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD-in-Windows-Media-Player

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• PrimoSDK unknown error when burning disk

  Hello

  Yet CS6. I have the record of generation a DVD with my stuff. Then I try to still use to burn the DVD. Immediately after I started this process, I get "Unknown error PromoSDK" yet.

  I tried to use Windows 7 to burn the disc - it strives to burn, but when I try albums look in my DVD player, it is recognized as a "data disc" and that it is not played.

  I also tried to burn an ISO, but I Don t understand how it works - what to write to the disc? My DVD player does not recognize this.

  May be several problems here, combined with my limited knowledge - hope someone can help with one or all the problems!

  Thanks in advance!

  Håkan

  1, can help to the tutorial in the #3 http://forums.adobe.com/message/2276578 message list, with more help in the message #5

  -close to the bottom of page 3 there is a section on learning yet

  2nd, the FREE http://www.imgburn.com/index.php?act=download to write files or folders or ISO disk (send the author a PayPal donation if you like his program)

• Qosmio F60 - error when burning Blu - ray discs

  I have a Qosmio F60

  Recently, I tried to burn my data on BD - R 25 gb disc. Aftre burn about 6 GB of data, it stopped burning with unexplained error. I tried another disc with the same problem. This time the suggested message updated firmware. This is MY * A BD - MLT uj240ES blue ray player. I am unable to find any updated firmware update. Current firmware is version 1.10.

  Can someone help me on this

  Hey,.

  If a firmware update is available, you can find it on the official website of Toshiba:
  http://EU.computers.Toshiba-Europe.com

  If this isn't the case, you already have the latest version of the firmware.

  In your case, I recommend to test different brands of blu - ray discs. I have good experiences with Verbatim and TDK discs.
  Check this box!

  By the way: I prefer a backup of the data on an external HARD drive. It of safer and easier! ;)

• Error when burning a DVD DVD Maker - "impossible to crΘer the cataleptic failure of dvd.

  Original title: Windows DVD maker
  I get the error (failed to create the cataleptic failure of dvd)

  Hello

  I suggest that you try reducing the burn speed in the creation of DVD and check if it works.
  Choose a speed slower burn to your DVD recorder as follows:

  1. return to the page Add images and videos on the DVD and then click onOptions.
  2. in the DVD burning speed box, selectmedium orslow.

  Also, make sure that you save the movie on the computer and try to burn it.
  If the previous step fails, then I suggest that you uninstall any third-party DVD burning software from the computer and check if it works.

  Solve problems with creating a DVD-video using Windows DVD creation
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-creating-a-DVD-video-using-Windows-DVD-Maker

  Change Windows DVD Maker DVD-Video settings:
  http://Windows.Microsoft.com/en-us/Windows-Vista/change-Windows-DVD-Maker-DVD-video-settings

  Burn a DVD-video disc:
  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-DVD-video-disc

  
  Kind regards
  Afzal Taher-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error when burning DVDs in pre 8.0 "target error device - the device is not suitable for use.

  I'm trying to burn a dvd in first elements 8.0 but after 96% iam getting this error:

  "device target error - the device is not suitable for use.

  I tried all these steps according to this link: http://kb2.Adobe.com/CPS/515/cpsid_51553.html .

  System configration:

  Win vista 32 bit.

  Processor: Amd athlon 64 dual core 2.60 GHz.

  RAM: 3 GB

  Graphics card: nvidia geforce 6150 is.

  Model number of camcorder: JVC gz-hm320.

  Format: .mts

  Image size: 1920/1080

  Frame rate: 29.97.

  

  Please look at this problem.

  Concerning

  Manoj Khati

  Here are the search results for your error: http://forums.adobe.com/search.jspa?q=device+error+target+device+isn%27t+suitable+for+use& resultTypes = MESSAGE & dateRange = all & communityID = 3271 & username = & numResults = 15 & rankBy = 10001

  See you soon,.
  --
  Neale
  Insanity is hereditary, get you your children

• Error writing and freezing when burning Audio CD in WMP Windows Media Player 11

  WMP11 has always worked well for me in the past, but in recent weeks it has errors of intermittent and inconsistent writing.

  @ 50% of the discs I burn out very well. The rest will be error when writing and I get a message saying to try different media (which I did) or try a slower speed (which I also did). Bought 2 new types of CD - r and same thing @ 50% of success. Slow speed seems to have no improvement, always @ 50% of success. I have 2 drives and I've tried both and same thing, @ 50% of success with either. The last disc I tried to burn today order written almost 78% and then froze my computer all, no control of cursor, no keyboard, nada. I had to turn off the Tower!

  All other functions in WMP look normal. It seems to me be excluded from media-related questions, speed and material issues so I am at a loss for what to do. Help, please! It becomes very expensive and frustrating with all these failures. Help! ;)

  PS I went in the application event log and it does not show the gel today.

  Try to remove the CD-ROM drive in the Device Manager. Then reboot, Windows should automatically reinstall the drive.

  If this does not help, make sure that the DMA mode for the drive: http://www.cdrlabs.com/forums/how-enable-dma-windows-with-pictures-t7625.html .

  Tim Baets
  http://www.BM-productions.TK

• 'Burning disc error' when you try to burn a DVD

  Original title: I get the message "disc error" when trying to burn a DVD. I have recently restored factory settings and had no problem burning DVD previously. Any suggestions to fix this?

  I have a computer laptop advent 9117.

  Hi Adam,.

  What is the full and exact error message?

  I suggest you to refer to the article and see if it helps:

  Error message when you try to burn files on a recordable disc in Windows Vista: "there was an error burning this disc."

  http://support.Microsoft.com/kb/934544

  Let us know if it helps.

• I can't uninstall nero programes from my computer it install to properly dose not work and I get a critical system error when I try to burn lightscribe cover__

  I can't uninstall nero programes from my computer it install to properly dose not work and I get a critical system error when I try to burn the lightscribe cover

  http://www.Nero.com/enu/tools-utilities.html

  Uninstalling a Nero product did not work properly?
  Use Nero General CleanTool to delete all remaining Nero entries from your system.

  Read the above info.

  See you soon.

  Mick Murphy - Microsoft partner

• I get an 0XC0AA0301 error code when burning DVDs...

  I get an 0XC0AA0301 error code when burning DVDs...

  Hi mohamed,.

  Thank you for visiting the community Microsoft Windows 7.  This message provides troubleshooting steps about the error you received when you try to burn DVDs.

  Please let us know if this helped.

  Dena
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• creation of DVD Windows guard give the error message indicating the error occurred when burning the dvd

  I'm trying to use creation of Windows DVD to burn a DVD. The program starts in mode "coding" and after a minute or two, I get an error message informing me "cannot create an error has occurred when burning the DVD DVD»  Can someone tell me what to do?

  "DVD burning speed. This option allows you to select the speed to burn your DVD. The default value is the fastest growing. Some DVD burners do not burn at full speed if you use certain types of DVD. If you have a problem burning a disc, try selecting medium or slow. "Also try another brand of blank DVD.

  Change Windows DVD Maker DVD-Video settings
  http://Windows.Microsoft.com/en-AU/Windows7/change-Windows-DVD-Maker-DVD-video-settings

  See if there is another program interfering.

  How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8
  http://support.Microsoft.com/default.aspx/KB/929135