Qosmio F60 - error when burning Blu - ray discs

Similar Questions

• Dvd player MediaSmart not working - when a Blu - ray Disc I'm invited to be updated, but even with the update it will not play.

  I have laptop HP Pavilion dv7-1260.  When I put in a blu - ray disc I'm propmted to get an update.  Even with the update, it will not play a blu ray.

   

  Hello

  ·         What is the update message that you receive?

  ·         Do you have an error message when you try to read the Blu - ray Disc?

  ·         This problem occurs only with Blu ray discs or any of the others?

  To play a Blu - ray disc, you must use a non-Microsoft program that supports Blu - ray playback and a device that can play Blu - ray discs.

  See the link below:

  http://Windows.Microsoft.com/en-us/Windows7/MPEG-and-DVD-video-frequently-asked-questions

• Still ignores recent changes created when burning Blu - Ray

  Hi everyone-

  When I change the detailed underlying film Premiere project file pieces, I take care of to save.

  At the opening, still, I'm going to project window (top left label) then highlight the relevant first project File.pproj, and then click on revert to the Original.

  When I burn a DVD, yet many transcoding etc perhaps spending an hour on this (an hour on DVD hardware) before starting to write.  So, he burns the latest version of the Premiere project file.

  BUT when I burn a Blu - Ray disc, still seems to "remember" the previous version of the project file underlying first, doesn't bother to do many transcoding, etc. and after a maximum of 5 minutes he began to write the disc - which then the precedent not the latest version of the first underlying project file.

  (Either by the way, I'm in CS5 and Windows 7 and did not have problems of major software so far.)

  I understand that if I start a new project from scratch, it will be important to the latest version of the Premiere project file and I did it with success on another project where the menu is so simple to recreate it is not a problem.

  However, on THIS project, I have a complicated menu, giving access to a long (with a submenu preselection of stage) and three film projects short first and so begin a new reminder of the project file and build a whole new menu with scene selections would be a lot of hassle, that I would rather.  Simply copy the project still would probably just in me the problem of the copy.

  Anyone got any ideas?

  Thank you very much

  Jan

  To make comic books, you must change the project type to BD. the build type, Yes?

  When you see in the comic book the type of transcode is transcoded, it means that you have not restored. Change the type of project in BD, then return to this asset.

• Yet 5.1 on OS 10.5.8 burn Blu - ray discs, but crashes during the generation of the same project DVD

  I spent a few weeks creating a Blu - ray disc double layer with 20 menus and 44 timelines lengths ranging from 18 minutes 9 seconds.

  The final product will be a double pack containing the replicated Blu - ray Disc and DVD.

  I have pre-transcoded DVD and BD and related assets proper. The Blu - ray Disc built properly and seems to have no problems.

  When I try to output in DVD Encore crashes almost immediately. I also tried to record just a DVD image, and it crashes at the same place.

  I don't really want to recreate this entire program in DVDSP, but that's my plan.

  Other ideas would be appreciated.

  Thank you!

  So I solved the problem by removing all the ac3 and m4v (including the related m2v) records on the SNA timlines replacing the original self-contained reference movies from FCP7. Then, I left still transcode and build from one day to the next, hop in the DVD to work one morning.

  Now, I just need to transcode again for the Blu - ray or return to a backup...

• Error 'Could not create ac3' when burning Blu - ray

  I spent the last week, a reader Blu - ray in Encore CS5 design.  Combustion, they gave me the error message "Cannot create"_sessionfiles_Dsf_session_1_audio.ac3", and the burn failed (after going to seven hours).  I don't really know even where to start with this.  The Blu - ray is about 80% of the full (20 GB) and includes several chronologies and several menus (including audio).  No pop ups.  It should be a fairly simple project.  However, it gave me problems after the problem and has taken far too long.  Can anyone offer insight before I spend another week chasing the problem?  Thank you.

  Congratulations and condolences then!

  Either the burn was bad (the inability to check), in which case a reburn could fix, or you have a navigation problem, in which case you will need to fix this.

  You can navigate through the menu of the specific aspects? The action of the end of the scenario for the main movie is clearly defined in the menu special functions? In preview, but still on the main timeline, click the icon for "end action"; that works correctly?

  You can also try to play the image, and see if it behaves correctly (again showing a bad burn). The problem with this is that a) have you usually mount the image and b) some software players emulate correctly and a failure doesn't mean much. But if it plays properly, it indicates a bad burn.

  What third-party burning software has failed?

• Still crashes when burning blu ray to disk image

  I created a disk image of 15,88 GB blu ray and with success (after several tries) burned a nice blu ray player, then when I try to burn another disc by importing the disk image, the grip of the software after burning several hundred MB, making the disc useless, and I have to force leave again to escape.  Advice in why I get this conflict?

  Switched to Toast for burning.  Thanks for your help Stan.

• HP Pavilion Elite HPE - 480t computer and burner blu - ray 12 x HP bd 340i

  Model bd340i in the middle of last year, I bought HP 12 x Blu - Ray burner. When I bought my HP Office in December 2010 model HP Pavilion Elite HPE - 480 t, I installed the burner and everything worked very well. Today, I tried to burn a blu - ray disc, and he returned with can't read media, which stood on imgBurn. So I tried the same thing on the burner systems, and she came back as no drive in the status bar. I have also tried burning CyberLink software and the same thing no disc.

  I then tried to play the two store bought and home made blu - ray disc and could not read media. I was ready to blame it on a bad burner but then I tried a regular DVD the two store bought and done House, and it plays very well. I then tried to burn a single dvd double layer with all the burning software three I have and it is still fine, no problem. It's just the blu - ray media that cannot be read or written. The only supports blu - ray, I used from the first day was Kodak and never had a problem. That's what baffles me.

  At this point, I don't know if it's a hardware or software problem with the computer or burner blu - ray or both. 3 different burning programs works fine on DVD but not blu - ray, DVD plays fine but can't play or burn blu - ray discs.

  Could this laser blu - ray crapped out and the dvd reading and writing laser still works?  Must a blu ray burner still lasers for both media (DVD and Blu Ray)?

  Everything else with the computer works fine. I even tried uninstalling and reinstalling and it is the same, I tried to update the drivers and firmware on your site and still does not work. Please help.

  When did you purchase your product? : December2010
  Product HP Pavilion Elite HPE - 480t CTO desktop PC
  Select a problem area: other
  What is your serial number (SN): [personal information deleted]
  What is your operating system? : Microsoft Windows 7 Home Premium 64
  Your computer is unable to work with Accessories products? Please select all the boxes. other
  What type and brand of CD/DVD media you are using? Kodak 25gig of Bu-Ray and dvd HP
  The CD/DVD writer burner was built in the computer when you bought it? NO.
  You hear the sound from the speakers connected?
  The display on the product seems to work correctly? Yes
  Have you connected the product to your TV, DVD player or a music system? NO.

  If there is an error message, please specify: cannot read media
  Description of the problem: I bought burner HP 12 Blu - Ray model bd340i in the middle of last year. When I bought my HP Office in December 2010 model HP pavilion Elite HPE - 480 t, I installed the burner and everything worked very well. Today, I tried to burn a blu - ray disc, and he returned with can't read media, which stood on imgBurn. So I tried the same thing on the burner systems, and she came back as no drive in the status bar. I have also tried burning CyberLink software and the same thing no disc. I then tried to play the two store bought and home made blu - ray disc and could not read media. I was ready to blame it on a bad burner but then I tried a regular DVD the two store bought and done House, and it plays very well. I then tried to burn a single dvd double layer with all the burning software three I have and it is still fine, no problem. It's just the blu - ray media that cannot be read or written. The only supports blu - ray, I used from the first day was Kodak and never had a problem. That's what baffles me.
  Please provide previous steps of troubleshooting, or information that can help HP help you. : I don't know at this point if it's a hardware or software problem with the computer or burner blu - ray or both. 3 different burning programs works fine on the DVD but not blu - ray, DVD plays very well, but can not play blu - ray.
  Nothing changed since the device was working properly (installation of SW, settings, wiring, etc.): everything with the computer works fine. I even tried uninstalling and reinstalling and it is the same, I tried to update the drivers and firmware on your site and still does not work. Please help.
  How would you describe your level of technical skill? : intermediate
  First name Peter
  Name, first name rider
  [Personal information]

  Arcticwolf, sorry, I miss read your post details. That strangely resembles a failed drive. Try unistalling and reinstalling the drive, including the software and driver. If a problem has occurred, it may fix.

• Qosmio F750: Toshiba Blu Ray Disc Player does not play videos in 3D

  Hallo,

  I had to re set my PC and installed then drive Blu Ray Disc tosbiha and also Super D and XTune.
  Also also made installation with xtune.

  So now, I'm trying to watch a 3D movie it is not possible to play, the system displays only 2 parallel pictures.
  In the player, Miss me the 3D icon.

  I also installed Caberlink Power DVd V13. But here also no 3D film is projected...

  Does anyone know how to enable 3D in Toshiba Player or how Cyberlink Power DVD to work with this laptop...

  Thank you

  > If I try now to watch a 3D movie, it is not possible to play, the system shows only 2 parallel pictures.
  > In the player, Miss me the 3D icon.

  See this Toshiba document:
  [3D video content not displayed in 3D when you use the disc drive Blu - ray Toshiba on the Qosmio F750 | http://aps2.toshiba-tro.de/kb0/TSB1C038C0000R01.htm]

• Qosmio X 500-116 will not play blue-ray discs

  Hello world

  bit of a newbie on laptops but my Qosmio dvd player won't play Blu - ray movies using the "Toshiba DVD Player", although it will play normal DVD movies no problem. I use the wrong software? search through programs pre-installed, I as ' nt seem to find those related to playback of a blue-ray disc! Or the problem would be something to do with not having the correct drivers? The laptop can read BD - RE drive, and I can look at the files but when I try and play movies Blue-ray using "Toshiba DVD player" he either says "application not found" or "launcher from DVD Toshiba cannot detect Toshiba DVD Player.

  Any help would be appreciated, thx

  Hey,.

  I put t know but maybe it s a useful article:
  http://APS2.toshiba-tro.de/KB0/TSB0402V40000R01.htm

• Qosmio-F750-10 q: compatibility of DVD/Blu-ray Disc player to help to win 8

  Since the upgrade to Win7 for Win8 the TOSHIBA DVD/Blu-ray Disc player has compatibility problems. When is an update due please?

  Y at - it a update driver also needed to activate the 3D?

  Thank you

  Hello

  I assume you are using the Win 7 Toshiba DVD/BD drive.
  So I t wonder compatibility issues appears.

  Looks like you will have to wait for the release of Win 8.

• Qosmio X 500 - 10z - acoustic bass watch Blu - ray disc

  Hello

  for all those who can help me
  I bourght this computer very well and I was told it's of amazing sound.
  now I reinstall windows 7 and all drivers - now when I play a blu - ray disc the sound player is very very low. This maybe on that expensive computer of Pentecost harman/kardon spekers? or something wrong. the sound is fully active
  100%. I use windvd to read comics.

  best regards wery

  Hoffer

  Hello

  I don't think it's a real problem.

  The laptop supports the Harman Kardon speakers so they are really good speakers.

  In addition, you can check the Panel of-> sound-> the Read tab
  Choose here the speakers and click Properties.
  If the level is set to max and then sound loudness is already at full level
  In addition, you can check the volume of the player.
  But that's all you can do,

• Blu Ray error "Mediasmart DVD does not support playback of Blu - Ray disc on a virtual device"

  Blu - Ray has suddenly stopped playing Blu-Rays, with the error message "Mediasmart DVD does not support playback of Blu - Ray disc on a virtual device. A Blu - Ray disc must be inserted into a BD - ROM drive for reading. »

  I don't think it's a hardware problem. And I did nothing, it just happened by itself. Help, please.

  Thank you.

  HP PAVILION XX209AV

  Thomas Pellegrino

  Hi RowlandShaw,

  I saw your post and I'll be happy to help you. You receive the correct Mediasmart DVD error message? What is your product number?

  Find your product on a desktop computer number:

  http://support.HP.com/us-en/document/bph07555

  Find your product on a laptop number:

  http://support.HP.com/us-en/document/c00033108

  Thank you

• LG GGW-H20L ATA use to work now, does not burn and no formatting Blue Ray discs but a DVD.

  I was burning Verbatim 25 G Blue Ray discs like crazy, as well as the monolayer regular and double layer DVD for more than two years and now it will not burn or format Blue Ray discs. It appears in my computer and it won't give me the options of the ISO image or Live to get in shape. I use both bury camera Panasonic and Adobe CS4 software.  I use only the part simple DVD sex the LG GGW - H20L ATA now. I tried several things here on the internet, but nothing works, nothing works yet. Even tried the new installation of Vista 64 and still nothing. I tried to reflash LG GGW-H20L-ATA with the same version of the software package.

  Anyone has the same problem or a solution? I need Blue Ray for my video business.

  Hi NewVideo,

  Try the troubleshooting steps suggested in thisthread.

  Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Dena
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Problem with burning Audio files to a blank CD error "Windows Media Player encountered an error when burning. Check that the burner is connected properly and that the disc is clean and not damaged"

  I recently burned music CD blank so I can enjoy some songs in the car. After that a few discs engraved with success, I received the message "Windows Media Player encountered an error when burning. Check that the burner is connected properly and that the disc is clean and not damaged"when trying to burn audio. To see if it was the m drive, I tried to burn audio files to four separate discs and each of them had the error message. The discs are brand new and have no information on them. I do something wrong or is my burner disconnected? Thanks for all your help and your support! I hope that we can find the cause of this problem so I can continue to make the CDs.

  Consumers concerned,

  Cody bridges

  Could you also confirm that it is playing the discs ok?

  Run the sfc tool and see if it shows anything... instructions here.

  http://support.Microsoft.com/kb/929833/en-us

• Burn a Blu - ray disc and 3D

  How do burn you a blu - ray disc 3D video?

  Thank you

  Joe

  First of all, you still get

  Instructions again, cloud or version https://forums.adobe.com/thread/1992717 serial number