Error when burning DVDs in pre 8.0 "target error device - the device is not suitable for use.

Similar Questions

• Problem burning DVDs. "Error in device - device target is not suitable for use.

  Hi all

  Initially, I had many problems with PE8. However, the update of nVidia Driver resolved most of them.

  Just thought it was important to note the success, but also failure!

  However, one problem remains. I get the following error at the level of the mark of 96% when burning. "Error in device - device target is not suitable for use. It is always the mark of 96% and the program is "[something] compilation" when this happens.

  After searching this site I noticed that the user rgferg posted a similar problem 13 days ago has been redirected to repost in a different place, but never did.

  I tried to burn a clip 1 hour 4 times and each time I chose the slowest burning speed (8 MB/s), as suggested. It seems that the lower support is a culprit, so I bought some Verbatim DVD media - R [quality] try in my optical drive SATA Phillips. I'm skeptical it will work, but nevertheless open-minded. I'll give it a whirl when my computer has stopped capturing VHS, I train.

  Whenever combustion not not the disc was ejected automatically and the burn process actually started and progresses maybe about 40% or more.

  That tells me it's a question of sharing, rather than issue a support. Somewhere on this forum, he suggested that I go through a process of 20 stages and remove/disable each piece of software that can compete with the first, among other things. IF I do this what do I burn through the outside of Adobe? What I need imgburn or whatever it was called? What happens if I like Nero? Nero 6 has worked very well for me for 3 years.

  So I am ready to uninstall my old optical drive burning software, who out there can recommend commercial software which, for them, creates a painless Adobe burning experience without errors or conflicts? Perhaps there is another solution that I've not seen on this forum?

  I am running Windows XP SP3. I have the latest nVidia drivers for my cards SLI GeForce 7600 GS. I have 3 monitors. RAID 0 SATA, 2 GB RAM, Athlon X 2 5400.

  Justin.

  Since you are apparently able to burn to a folder on your hard drive, but not directly on a DVD, the problem is most likely that another program (Nero, for example) is interfering with communications between Premiere Elements and your DVD burner. This is very common.

  Rather than fight with it, the easiest solution is simply to burn your files on your hard drive and then use Nero (or whatever your burner program) to burn the VIDEO_TS folder to a playable disc. This process takes no more time and offers a number of advantages, including the fact that he make several copies of your DVDs very easy.

• Error 2753 - the file is not marked for instalation

  Hello

  For a few days I am trying to install a program but keep on receipt of this message - "Error 2753 - the file is not cheap for instalation". I tried to solve the problem with Mr. Fix It but still nothing... Please help

  Have what difficulties you tried it?
  What program are you trying to install?
  Is it just the program that to happen?

  You can try (re) install the latest installer of Windows version WindowsXP-KB942288-v3 - x 86 .exe from here: http://www.microsoft.com/download/en/details.aspx?id=8483
  Note that you need to have SP2 or SP3 installed.

  Let us know if the same problem while trying to install that.

• I bought Photoshop and elements of order #AD003212006UK. When I try to download I am informed that the software is not suitable for my system (new iMac, retina) Please help

  I bought Photoshop and elements of order #AD003212006UK. When I try to download I am informed that the software is not suitable for my system (new iMac, retina) Please help

  You are 100% sure that you are clicking to download the Mac version and not the version of Windows?

  Since this is an open forum, not Adobe support... you must contact Adobe personnel to help
  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific time) <===> NOTE DAYS AND TIME
  Don't forget to stay signed with your Adobe ID before accessing the link below

  Creative cloud support (all creative cloud customer service problems)
  http://helpx.Adobe.com/x-productkb/global/service-CCM.html
  -or by phone http://helpx.adobe.com/x-productkb/global/phone-support-orders.html

• How to error if the Date is not expected for the CSV Format

  Hi Experts,
  I have a situation where I expect to format DATE as "LUN-DD-YYYY", but there are issues when the CSV file is created with a DATE as "MON-DD-YY" (example November 15, 12 '). The date is inserted in the DB as November 15, 12 ', so I'm looking for a way to not load these files and these folders with incorrect dates added .bad and .log files. Here is my SQL:
  DROP TABLE PER_ALL_ASSIGNMENTS_M_XTERN;
  
  create table PER_ALL_ASSIGNMENTS_M_XTERN)
  PERSON_NUMBER VARCHAR2 (30 CHAR),
  ASSIGNMENT_NUMBER VARCHAR2 (30 CHAR),
  DATE OF EFFECTIVE_START_DATE,
  DATE OF EFFECTIVE_END_DATE,
  EFFECTIVE_SEQUENCE NUMBER 4,
  ATTRIBUTE VARCHAR2 (30 CHAR) CATEGORY,
  _ATTRIBUTE1 VARCHAR2 (150 CHAR),
  ...
  ATTRIBUTE Numero20 NUMBER,
  ATTRIBUTE DATE1 DATE,
  ATTRIBUTE DATE2 DATE,
  ATTRIBUTE DATE3 DATE,
  ATTRIBUTE DATE4 DATE,
  ATTRIBUTE DATE.5 DATE,
  ATTRIBUTE DATE6 DATE,
  ATTRIBUTE DATE7 DAY,
  ATTRIBUTE DATE8 DAY,
  ATTRIBUTE DATE9 DATE,
  ATTRIBUTE DATE10 DAY,
  ATTRIBUTE DATE11 DAY,
  ATTRIBUTE DATE12 DATE,
  ATTRIBUTE SMOKERS13 DAY,
  ATTRIBUTE DATE14 DAY,
  ATTRIBUTE DATE15 DAY,
  ASG_INFORMATION_CATEGORY VARCHAR2 (30 CHAR),
  ASG_INFORMATION1 VARCHAR2 (150 CHAR),
  ...
  ASG_INFORMATION_NUMBER20 NUMBER,
  ASG_INFORMATION_DATE1 DAY,
  ASG_INFORMATION_DATE2 DAY,
  ASG_INFORMATION_DATE3 DAY,
  ASG_INFORMATION_DATE4 DAY,
  ASG_INFORMATION_DATE5 DAY,
  ASG_INFORMATION_DATE6 DAY,
  ASG_INFORMATION_DATE7 DAY,
  ASG_INFORMATION_DATE8 DAY,
  ASG_INFORMATION_DATE9 DAY,
  ASG_INFORMATION_DATE10 DAY,
  ASG_INFORMATION_DATE11 DAY,
  ASG_INFORMATION_DATE12 DAY,
  ASG_INFORMATION_DATE13 DAY,
  ASG_INFORMATION_DATE14 DAY,
  DATE OF ASG_INFORMATION_DATE15
  )
  external organization
  (the default APPLCP_FILE_DIR directory
  access settings
  (records delimited by newline jump 1
  BadFile APPLCP_FILE_DIR: 'PER_ALL_ASSIGNMENTS_M_XTERN.bad'
  APPLCP_FILE_DIR log file: 'PER_ALL_ASSIGNMENTS_M_XTERN.log'
  ' fields completed by ',' EVENTUALLY ENCLOSED BY ' "'
  (PERSON_NUMBER,
  ASSIGNMENT_NUMBER,
  DATE MASK EFFECTIVE_START_DATE CHAR(20) DATE_FORMAT 'DD-MON-YYYY. "
  DATE MASK EFFECTIVE_END_DATE CHAR(20) DATE_FORMAT 'DD-MON-YYYY. "
  EFFECTIVE_SEQUENCE,
  _ATTRIBUTE_CATEGORY,
  _ATTRIBUTE1,
  ...
  _ATTRIBUTE_NUMBER20,
  DATE MASK _ATTRIBUTE_DATE1 CHAR(20) DATE_FORMAT 'DD-MON-YYYY. "
  DATE MASK _ATTRIBUTE_DATE2 CHAR(20) DATE_FORMAT 'DD-MON-YYYY. "
  DATE MASK _ATTRIBUTE_DATE3 CHAR(20) DATE_FORMAT 'DD-MON-YYYY. "
  DATE MASK _ATTRIBUTE_DATE4 CHAR(20) DATE_FORMAT 'DD-MON-YYYY. "
  DATE MASK _ATTRIBUTE_DATE5 CHAR(20) DATE_FORMAT 'DD-MON-YYYY. "
  DATE MASK _ATTRIBUTE_DATE6 CHAR(20) DATE_FORMAT 'DD-MON-YYYY. "
  DATE MASK _ATTRIBUTE_DATE7 CHAR(20) DATE_FORMAT 'DD-MON-YYYY. "
  DATE MASK _ATTRIBUTE_DATE8 CHAR(20) DATE_FORMAT 'DD-MON-YYYY. "
  DATE MASK _ATTRIBUTE_DATE9 CHAR(20) DATE_FORMAT 'DD-MON-YYYY. "
  DATE MASK _ATTRIBUTE_DATE10 CHAR(20) DATE_FORMAT 'DD-MON-YYYY. "
  DATE MASK _ATTRIBUTE_DATE11 CHAR(20) DATE_FORMAT 'DD-MON-YYYY. "
  DATE MASK _ATTRIBUTE_DATE12 CHAR(20) DATE_FORMAT 'DD-MON-YYYY. "
  DATE MASK _ATTRIBUTE_DATE13 CHAR(20) DATE_FORMAT 'DD-MON-YYYY. "
  DATE MASK _ATTRIBUTE_DATE14 CHAR(20) DATE_FORMAT 'DD-MON-YYYY. "
  DATE MASK _ATTRIBUTE_DATE15 CHAR(20) DATE_FORMAT 'DD-MON-YYYY. "
  ASG_INFORMATION_CATEGORY,
  ASG_INFORMATION1,
  ...
  ASG_INFORMATION_NUMBER20,
  DATE MASK ASG_INFORMATION_DATE1 CHAR(20) DATE_FORMAT 'DD-MON-YYYY. "
  DATE MASK ASG_INFORMATION_DATE2 CHAR(20) DATE_FORMAT 'DD-MON-YYYY. "
  DATE MASK ASG_INFORMATION_DATE3 CHAR(20) DATE_FORMAT 'DD-MON-YYYY. "
  DATE MASK ASG_INFORMATION_DATE4 CHAR(20) DATE_FORMAT 'DD-MON-YYYY. "
  DATE MASK ASG_INFORMATION_DATE5 CHAR(20) DATE_FORMAT 'DD-MON-YYYY. "
  DATE MASK ASG_INFORMATION_DATE6 CHAR(20) DATE_FORMAT 'DD-MON-YYYY. "
  DATE MASK ASG_INFORMATION_DATE7 CHAR(20) DATE_FORMAT 'DD-MON-YYYY. "
  DATE MASK ASG_INFORMATION_DATE8 CHAR(20) DATE_FORMAT 'DD-MON-YYYY. "
  DATE MASK ASG_INFORMATION_DATE9 CHAR(20) DATE_FORMAT 'DD-MON-YYYY. "
  DATE MASK ASG_INFORMATION_DATE10 CHAR(20) DATE_FORMAT 'DD-MON-YYYY. "
  DATE MASK ASG_INFORMATION_DATE11 CHAR(20) DATE_FORMAT 'DD-MON-YYYY. "
  DATE MASK ASG_INFORMATION_DATE12 CHAR(20) DATE_FORMAT 'DD-MON-YYYY. "
  DATE MASK ASG_INFORMATION_DATE13 CHAR(20) DATE_FORMAT 'DD-MON-YYYY. "
  DATE MASK ASG_INFORMATION_DATE14 CHAR(20) DATE_FORMAT 'DD-MON-YYYY. "
  DATE MASK DATE_FORMAT ASG_INFORMATION_DATE15 CHAR (20) 'MON-DD-YYYY ".
  )
  )
  location ("PER_ALL_ASSIGNMENTS_M.csv")
  )
  REJECT LIMIT UNLIMITED;
  
  .. example report CSV:
  
  E040101, EE040101, 1-Aug-00: 31-Dec-12, 1, NDVC, YES, SFC, N, STIP Plan - pressure, E040101, 2080, 5, 31113, 31113, 31113, 31113, 31113, 31113, 1-Jan-12, 31-Dec-12.
  
  Thank you
  Thai

  Message details pl of the OS and database versions

  Use the RRRR instead of AAAA - http://docs.oracle.com/cd/E11882_01/server.112/e26088/sql_elements004.htm#SQLRF00215

  HTH
  Srini

• I get an 0XC0AA0301 error code when burning DVDs...

  I get an 0XC0AA0301 error code when burning DVDs...

  Hi mohamed,.

  Thank you for visiting the community Microsoft Windows 7.  This message provides troubleshooting steps about the error you received when you try to burn DVDs.

  Please let us know if this helped.

  Dena
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Missing slides when burning DVD

  I use PPT10 to create a slideshow convert ppt to WMV

  When burning DVD some slides don't you burn to a disc.
  Can someone tell me please on a solution?
  I'm using win DVD maker
  Thank you

  I use PPT10 to create a slideshow convert ppt to WMV

  When burning DVD some slides don't you burn to a disc.

  Can someone tell me please on a solution?

  I'm using win DVD maker

  Thank you

  ===========================================
  Just a couple of alternatives... I think that PowerPoint can
  not be the best software for this task.

  FWIW... If your project includes digital photos... you could
  import them into Windows DVD creation and create a DVD
  no need for other software.

  If you wanted a more polished slideshow with careful motion
  effects and transitions, you can create the slideshow in
  Windows Phioto Story 3 and save it in the WMV format...
  then import the WMV in DVD Maker.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  PhotoStory 3 for Windows
  http://www.Microsoft.com/download/en/details.aspx?ID=11132
  (works on XP, Vista and?) Win7?)

• I get this error message 'The URL is not valid and cannot be loaded' when I try to go to Firefox home. I uninstalled the modules, uninstaleed and reinstalled a new fresh firefox which did not help

  I get the following error message 'The URL is not valid and cannot be loaded' when I try to go to firefox home. I uninstalled modules, uninstalled Firefox and then install a new version. Still have the problem.
  Thanks for the help

  This problem may be caused by a corrupt installation of Visual C++ or incomplete (several versions can be installed-by-side; SxS) it lacks certain runtime components (redistributable Packages), which depends on Firefox (problem with an embedded manifest file that specifies a specific runtime version).

  You need to install the missing components (for example, Redistrbutable end 2005 ++).

  • https://www.Microsoft.com/download/en/details.aspx?ID=5638
  • [908165/questions/908165] The URL is not valid and cannot be loaded
  • bug 713167 - Microsoft.VC80.CRT SideBySide errors, browsercomps.dll

• When you try to import photos, I get an error that says that the preview is not available for this file.

  When you try to import photos I get an error that says: Preview is not available for this file. Then when I try to download these files, a gray box returns for each photo with the name of the file, and this error message -Preview is not available for this file but no picture. The files are JPEG files. I use Lightroom CC help?

  Some additional information. I received these photos of my granddaughter of my son with Dropbox. I checked the files under properties and found that they were listed as "some blocked properties" so I checked the box to 'unlock' and click on apply. The blocked message went away. Then, I took the original photos out of the folder of file they were in. I went back to LR and made sure those grey boxes with the Preview is not available for this file was missing. Then I went to the new files with the status of unlock in a new folder and tried to import into LR... same thing happens again! UGH

  Hi rsobieski,

  Could you please copy the images of Dropbox in a new folder on the computer/pictures folder.

  Also, then try again to import images into Lightroom and also please check if you have read and write permissions on the images.

  Kind regards

  Tanuj

• my window media does not play wen I insert the dvd disc it say that a compatiable device is not install please tell me what I need to do thanks.

  Hello my pblem is that my Windows media player does not play wen I insert my dvd disc it say that a compatiable device is not installed please help me thanks in advance

  Hello

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Hope these helps.
  Rob - bicycle - Mark Twain said it is good.

• can not install the latest version of itunes, get the error msg: "the component you are trying to use is on a network unavailable resource."

  Can not install the latest version of iTunes.  Everytime I try I get this error msg: "the component you are trying to use is on a network resource that is unavailable."

  Then I click OK and get this msg: could not find the path C:\users\my name\appdata\local\apple\apple software update\itunes6464.msi.

  I need to sync my new iPad pro and because used to synchronize requires the latest update, I have my laptop but I never have syncd my ipad with this computer and if I try to backup if I agree to erase everything on my device and sync with the laptop.  Of course, I don't want to do what I want to see everything on the NEW ipad from the old version.

  I went through the troubleshooting and found a solution, but when I had finished making all this trouble report said, there was a pesky itunes shortcut file on the left and I can not delete this shortcut, regardless of how many times I try.  If I can't remove it, the Installation will be terminated.  How can I delete this file?

  For general advice, see troubleshooting problems with iTunes for Windows updates. Start by Missing MSI errors .

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  TT2

• Error: The system does not license for the OS image. The system cannot find the path specified

  Hello

  I copied the image of Windows Embedded 7 T510 using HP thin client capture on a USB port. Now, I'm trying to load this image in an another thin client Embedded Win 7 T510 via a USB port.

  However, when the customer starts using this image of the USB, I get error below.

  "Error: the system does not license for the OS image! The system does not have the specified path.

  What solutions do you recommend.

  Thanks in advance

  Solution:

  I tried to install it on a Linux Thin client... Is there had this error.

• Setup error Application-"the application could not initialize properly (Oxc0000135). Click on OK to terminate the application. »

  Had this feature Sharper Image 5 days weather for Christmas and of course we have over-paid for her-$50 bed bath & beyond.  I'm not as technical as most of you, but I am unable to even get the software to install.  I get an application error installation "the application could not initialize properly (Oxc0000135).  Click on OK to terminate the application. "I got the Version 1.01 in the box (and it does not say is the app forecast 4 days) and am running XP.  Thanks in advance for any help - of course, the is Helpline is to give an ambiguous 'we are closed for the holidays' without parameters for the last seven days... Grrr...

  Sure that the error occurs when you don't have a .NET framework is installed on your system. You can download/install here: http://www.microsoft.com/download/en/details.aspx?displaylang=en&id=26

• Error "LoadLibrary failed with error 126: the module is not found ' at the launch of programs

  Original title:

  From some programs, the program starts partially, then a pop up message saying "LoadLibrary failed with error 126: the module is not found. When you click on the 'OK' button, the program stops. I had this problem with several graphics applications such as PSP and Rhinoceros 3D.

  Any suggestions what can be causing this "error 126"?

  type cmd and click the black box for it...

• Impossible to install the software to receive error message like "16-bit MS-DOS subsystem config.nt msiexec.exe file system not suitable for running MS-DOS and Microsoft Applications."

  Hello

  Original title: problem installing the software
   
  When my wife tries to install software (for example the updates of Windows or Itunes) on his Dell laptop (Windows Vista Home Premium), she gets this error developed box.
  "the 16-bit MS-DOS subsystem
  The msiexec.exe config.nt file this system is not suitable for running MS-DOS and Microsoft Applications. »
  Grateful for any ideas on how to fix this problem!

  Hello

  1. what 16-bit or software program you try to run? Should I use the CD Rom drive?

  2 - is the question also appear during the installation of Windows updates?

  3. have you made changes on the computer before this problem?

  Follow the methods and check them out below:

  Method 1: Perform a clean boot and check.

   

  To help resolve the error message, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  
  Please note:  After troubleshooting, be sure to start your computer in normal mode by following step 7.

  Method 2:

  Run an analysis of auditor of system files on your computer and check for the issue.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 3: Solve problems with programs that cannot be installed or uninstalled

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

  Hope the above information is helpful.