Acer 5920 no sound on HDMI port only when play Skyplayer

Similar Questions

• HDMI port stops when stowing E7450 processor and controller

  I have recently received a new E7450 processor and controller to replace an E7440. My E7440 worked perfectly in my PROX3 docking station. I have three monitors (right now, just try with two until the issue is resolved). Again, my E7440 works PERFECTLY with all three connected monitors. I connect two of them to the back of the docking station (VGA/DVI). The third is connected directly to the laptop's HDMI port. I used this configuration during the previous several years and two laptops from Dell.

  Now that I've updated for E7450 processor and controller, HDMI port ceases to push graphics as soon as the laptop is connected. Two other monitors work fine. Here is what I tried:

  1. I disconnected the other two monitors (ensuring that this isn't a problem with the graphics card does not support three monitors).

  2. I then plugged into the HDMI Jack on the laptop - nothing

  3. I seconded the portable - PHOTO! YAY!

  4. I have connected the laptop - photo gone, boo!

  5. Rinse and repeat in many different ways.

  ALSO, in which case it is suggested, I have already updated all drivers (BIOS, chipset, GPU, etc.).

  Conclusion, the laptop docking station seems to just close the HDMI port. How can I get that laptop to the HDMI port to continue working moored?

  * UPDATE *.

  I unplugged the other monitors of the docking station and the connected HDMI monitor started working. I reconnected it then either the docking station monitors and monitor HDMI immediately lost the connection again. For some reason, this laptop is not allow both HDMI and VGA or DVI to work simultaneously.

  Never found a solution to the problem with HDMI works not as any other view is hung. That being said, I've found a workaround. I hope this helps others.

  Rephrase the question more clearly - I have an E6420 E7440 and a processors E7450 and controller. I installed Windows 7 Professional on all three laptops. Each laptop has all the updates applied and latest windows drivers. The E6420 and the E7440 both work with a connection HDMI, VGA and DVI (HDMI on the laptop itself, VGA/DVI on the docking station). E7450 processor and controller, although it has the same exact port as the E7440 design, does NOT allow for the HDMI port to work as any other display (VGA, DVI or DP) port is connected.

  Fortunately, the E7450 processor and controller has a mini DP to this topic. I bought an adapter mini DP to HDMI and connected my third monitor to the card and the mini DP port on the laptop. Now, all three monitors are working once more.

  Now Interestingly if I connect the mini DP to my E7440, it does NOT work while the other monitors are connected. So for the E7440, can I use the HDMI connection, but NOT the DP connection. Just the opposite with the processors E7450 and controller.

• Slow laptop only when playing online games

  Hello
  So I noticed that my laptop has become suddenly very slow BUT! Slow down its only when I play online games, it's going to be ok for the 1st 5 minutes but after that it will really slow down, his strange since I can watch videos on youtube, etc and surf the web without problem. But if I try the game it will be slow.
  My specs are: Intel (r) Core (TM) i3 m350 2.27 GHz 2.26 GHz CPU
  RAM: 4 GB with 3.80 GB usable
  and the type of system is the 64-bit operating system
  I have windows 7
  And no, it's not a connection problem.
  Also my CPU usage when you play the game will no more than 54% (mainly bounces between 23% and 40%). and my ram is stable enough to 53%

  I use google chrome, I noticed he blames only when I use chrome, its fine with firefox.

  Going to uninstall chrome and download the latest version to see if that helps.

• No sound via HDMI port to tv

  Hi all, I know it was question about it in the net, but I can not toot'paste any info helpful for my situation.

  Please advise,

  I have a HP DV9700 laptop running Windows Vista SP1 and 32 bit OS.

  I'm reading of my machine videos through my LCD tv.

  My TV is a Visio 1080 p full HD HDMI compatible 40 "or close

  No matter what I play a video on my computer I can't get audio through my TV lights.

  Audio playback fine on my machine.

  I have read the discussions and tried what I could understand too without success.  It is at this point in front of me.

  My taskbar has only a: Realtek HD audio Manager icon

  When I go on to the Graphics Device Manager, everything I have is no other device NVIDEA Geforce 8600 M GS

  No matter what I go in I do not see any options or settings to speak of HDMI anywhere?

  I left the HDMI pluged and rebooted, still nothing

  There is no setting on the TV to HDMI or external speakers.  House of theatre people or a computer at stores not any use either.

  Is this true of HDMI audio and video.  I will not need a separate right audio cable!

  Help, please.

  worked on this path too long for such a seemingly simple problem...

  Hi all

  I just wanted you to know that my problem has been corrected.

  I know, hit me in the head, I would have had a...

  Sometimes the simplest things are overlooked (I should know better).

  I was not select RealTek Digital Output the spokesperson for "Default" to use.  So, it was still using the Realtek HD Audio internal speakers.

  I just did not realize that I had to choose 'set as default' in for the external speakers to work.

  After doing this all my concerns have been resolved.

  Everything works fine now.

  Sorry to sound like a newbie & thank you for your patience.

• Compaq 8000 Elite SFF PC: No sound from HDMI port dispayMonitor

  I have a display port that I plugged an adapter to use a HDMI cable for external HD (TV) video.  The video is fine but I have no audio on the TV.  What I need to in Exchange for the map of the screen for a video card?  Or, if the current DM port support audio.  I downloaded all the video and audio drivers available.

  Thank you.  I was afraid of that.  I guess that the solution is to install a new video card?

• Dell studio xps 1645 sound driver IDT works only when it is installed.

  I have the dell studio xps 1645 with windows 7 home premium 64-bit installed on. I have a problem since I format the laptop and reinstalled windows 7 and driver.

  The problem is that with the IDT sound card driver. When I start up the laptop, I couldn't find any noise until then I install the IDT audio driver which is from the website of dell (dell.com.au) under the drivers of dell studio xps 1645 by download. Sounds appears when I installed this driver, but it is not as it should. I mean whenever I do reboot or turn off and then on the laptop, the sound will not come up to what I do reinstall the driver again. The thing is that I have to reinstall the driver whenever I want to use the laptop. can you help me out of this problem? is there any solution for this? I did some research until I get the way to recover my sound, but yes I'm stuck with this relocation pilot to use sound. I did troubleshooting of windows and he said nothing wrong with it. I'll also technician support close to home and they couldn't find anything wrong. I therefore ask microsoft in the hope that they know the way

  . Thank you.

  Hi Felix,.

  Thanks for posting your question on the Forums of community of Microsoft.

  I understand that the sound of your system plays only after you update the audio drivers. The question could arise due to the installation of the corrupt or incompatible driver package.

  Before troubleshooting, I would like to inform you that the drivers for the model of your system on the Dell Web site are displayed for Windows Vista, by default. So, I recommend you to change the operating system to Windows 7 while choosing for pilots.

  In addition, I would suggest trying the following methods and check if the problem persists.

  Method 1:

  Try running the fixit for audio playback of Windows problems and check if it helps.

  Diagnose and solve the problems of Windows audio playback automatically

  If the problem persists, try the following method.

  Method 2:

  If you have installed Windows 7 drivers from the website and have not properly been able to play the audio, then I suggest you to install the Windows Vista drivers from Dell site in compatibility mode and check for the issue.

  1. Download the Windows Vista driver on the Dell website.
  2. Right-click on the downloaded driver file.
  3. ClickProperties , and then select the compatibility tab.
  4. Check enable the option run this program in compatibility mode for: , then select Windows Vista from the drop down.
  5. Click OK and install the driver.

  For more information, please visit:

  Make older programs in this version of Windows

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

• Only get sound and a green screen when playing videos in MS Edge

  Hi, I have recently upgraded to Windows 10 and were not able to watch videos in the edge browser.  I get a green screen and his only.  I tried the guide troubleshooting, but when I right click to bring up the flash player settings there is no tab display.  I also have Chrome installed and videos play fine in it.  The view tab appears in the flash player settings when using Chrome.  Any help with this would be appreciated.  Thank you.  Flash Player version: 18.0.0.232

  Hi Jason

  Thanks for providing the dxdiag.

  To disable hardware acceleration, just add the threshold at the end of the file (mms.cfg):

  DisableHardwareAcceleration = 1

  Also, while your changes if you get an error similar to: "the file is already in use", follow the procedure; below

  1 copy the file to another location(for eg desktop)

  2. then make the necessary changes, then save the file

  3. copy the file to the original location.

  Thank you

• Warning only when playing games coming

  Recently, while playing games on laptop there is a warning msg saying: the cooling system to burst failure turn off computer immediately. can't that playing games. any ideas would be great

  Hello

  Here's my idea: get the unit to a service provider!
  Your PC is probably not get enough cooling.
  Games usually generates a lot of heat, and thus can cause the message of cooling.

  Hope this helps

  Tom BR

• Satellite Pro 6070: no noise, only when playing DVD

  Tried the drivers updated to toshiba for its yamaha - they do not work. Installed drivers updated Yamaha, still no joy with dvds.

  Has any body got any ideas or encountered this problem?

  Thanks Simon

  Hi Simon,.

  First of all, I suggest you check the settings of the application that you use to play your DVD. In particular, check that the "Mute" box is not checked and applications owner of the volume is turned up and active.

  Then, make sure the audio properties in your application are on the right audio device.

  Kind regards

• HP pavilion dv-6 hang up & overheating when working on the battery (only when playing games)

  Hang up my hp dv-6 & overheating when working on the battery, especially when playing games, even online games.

  but when I use the AC everything works fine

  I did all the updates to day and scan for virus, & error also I bought the new battery, but the problem still exists

  Information on my laptop:

  OS: win 7 pro 32 bit

  VGA: Intel (r) Graphics Media Accelerator HD

  RAM: 4 gaeremynck

  I need advice please.

  Clean the vents of your laptop using compressed air.

  Resources:

  Reduce heat and the fan noise by cleaning the air vents

• PC restarts only when playing games :(

  I was faced with this situation like 2 months ago and I think its gpu overheating I checked the temperature is 95 + the BCCode is 113

  And my features are

  Windows 7 Professional x 64 bit

  2 GB of Ram [1 x 1]

  NVIDIA 8400GS 1 GB [I know its really old, but there's a solution to solve this]

  Intel E7500 2.93 Ghz Core Duo

  Power supply - 450 Watt [I usually before 300 that I upgraded to 450 thinking he could fix but didn't]

  So pls help and answer the question, I hope you know these problems

  Yes - we know these problems.

  95 + what... (Too hot) Celsius or Fahrenheit (not too hot).

  To do this, then we can see what you have and eventually eliminate the cycles of message:

  Click on the button/ORB start in the lower left corner of your screen. Or, press the button of your keyboard Windows logo.

  In the type box:

  Msinfo32

  Select / click msinfo32.exe and the system information dialog box opens.

  Click System summary, click on edit, select all (Ctrl-A), copy (Ctrl-C) and then paste (Ctrl-V) the information back here in your next reply.

  For information about video drivers, expand components, click view, click on edit, select all (Ctrl-A), copy (Ctrl-C) and paste (Ctrl-V) feedback here.

  There will be some personal information (such as the user name and the name of the system), and anything that turns information private for you, simply delete the pasted information.

  In case it is NOT a temperature related problem you must configure your system to generate a dump of crash for analysis file so anyone can analyze the result.

  Here's how:

  On your desktop right click on advanced computer, system settings properties and make them look like this:

  

  There is no need to create the Minidump folder as window will create one if it takes.

  Then click OK, enough times to close all dialog boxes and restart your system for the changes to take effect.  After that restart, you can go back and check the new settings to make sure the adjustments 'stick '.

  There are a lot of temp monitoring programs.

  Some people like the free version of Speccy you can download here:

  https://www.Piriform.com/Speccy

  A good thing is when you launch it, then cut it, it will continue to show you the temp in the Windows System Tray/Notification area near the clock:

  

  Take note of the temperature when you are not playing games, so you can have a base line.

  Then play your game and see if you can recreate the problem of crash while monitoring the temp to see how hot things get before the crash (may take once or twice).

• No sound on hdmi out after windows 7?

  Help, please!

  I have a compaq presario cq71-230sa and I try to play the video through the hdmi on my samsung tv. before I upgraded to windows 7 (from vista) it worked fine. but now he only plays the picture but still sound comes from my laptop!, in sound devices is no longer an option for sound hdmi, but in Device Manager it says I have intel (r) high definition hdmi audio driver. I tried to disable the devices, display devices turned off, reinstall the drivers and everything said sound up-to-date and functional? I found no other aid anywhere! This is driving me crazy because he used to work very well? If any details are req please let me know. Help, please

  Hello

  This is the email from a friend:

  Establish the connection:

  1. connect the HDMI cable to the computer and television. If the TV has a "DVI/HDMI" port not in use. Use a HDMI port only.

  2 turn on the TV and select the HDMI port you use. Adjust the TV settings to receive audio HDMI if necessary.

  3. turn on the computer. (Optional, some people close the lid of the laptop immediately after hitting the power button, but I don't know why.) Most of the people shouldn't need to do).

  4. optional. Some models are better if the TV is set to the main display. To set, repeatedly press Fn + F8 (or ctrl + alt + F4) to scroll through the settings (laptop display only / display of the laptop with external/external display display only). Reboot the laptop.

  5. go to start > Control Panel > sounds > playback make "HDMI" the default device. (If "HDMI" is not there, right click in the white area and go to the section "Show disconnected devices" or "Show disabled devices" and see if it is there.)

  After connection problems:

  1. If there is still no option to select "HDMI" as default audio playback device, try to re-setup of update driver graphic or even try an older version. "" The graphics driver is the HDMI audio driver, not the audio driver on a regular basis a few people with Intel graphics card had the best results by uninstalling the graphics driver, reboot and let Windows search for a driver (instead of download the Dell printer driver

  support site).

  2. try to disconnect and then reconnect the HDMI cable.

  3 If you are using Windows Media Player or Windows Media Center but don't get no audio HDMI even after that that he is selected as the default playback device, go to

  Control Panel > sound > playback > Audio playback device / > HDMI > properties > Advance > exclusive Mode and uncheck "exclusive mode".

  4. try another HDMI cable.

  5. try another HDMI port on the TV.

  Good luck.

• HDMI port is not detected on my Satellite L755-1NX

  Hello

  I have a problem with the conector HDMI to my new laptop, I have bougth 2 weeks ago.
  The laptop detects no HDMI port. When I conect the laptop to a TV or monitor on a different pc, any of these detects anything.

  I tried to update a lot of drivers, old and new drivers Nvidia display drivers Intel... And I also do the 4 recovery DVDs, to restore the laptop to factory settings.

  All this without any solution. When I press Fn + F5, only there is the option of the LCD screen.

  I intend to use the guarantee to repair the laptop, because I think it's a hardware problem.

  What should I do?

  Thank you!

  Hello

  I think you should use the recovery discs that you made in the past.
  Retrieve the computer laptop back to factory settings and check if the HDMI would work again.

  And of course: it is possible that your HDMI cable is not correct.

• Satellite A200 - no DTS or Dolby Digital HDMI, stereo only

  I just bought a receiver AV HDMI especially wth for movies in avi or mkv with DTS or Dolby digital with my A200, but I can't seem to get the DTS or DD sound via HDMI, stereo only. Receiver AV should display the symbol DTS or DD if the source has, but I can't make it work. I don't get that audio stereo via HDMI, but not DTS or DD.

  Can anyone help? Please note that I already have the HDMI as default playback device.

  What you can try is to check the support of encoded formats.
  Start > Control Panel > Sound > reading > if no digital signal is peripheral (HDMI) listed click on it with the right button of the mouse and choose the option properties. Go to the Supported Formats tab and verify the encoded Formats it.

  I think that by default, all formats must be activated.

• Satellite L310-S408 - cannot connect the cable HDMI port

  Hi all...

  I bought this laptop about 1 week ago.
  I check that the HDMI port. but when I look closely, I realized that I can not use this port.
  because the HDMI port is closed by this body of the laptop.

  Can anyone give me the solution on this case?

  Thank you...

  I'm afraid I n t m understand exactly what you mean by closed by this body of the laptop.
  Is the HDMI port available or not? Can see you?

  The point is that different L300 are equipped with components different hardware and different hardware configuration.

  If the HDMI port is covered with the plastic cover then that would mean that this laptop doesn't support HDMI port