Acer aspire 5732z wait almost exactly a minute at the start

Similar Questions

• I have a mac with an SSD, it freezes after almost exactly 60 minutes

  I have a Mac with an SSD. It freezes after almost exactly 60 minutes and made for quite awhile - new version of iOS makes no difference

  What specific model Mac?

  Install a speed temperature and fan monitoring app like the following to see if overheating is the cause of the problem

  http://www.CrystalIDEA.com/Macs-fan-control

  • Note the time of the next frost. After the reboot, open the Console app in Finder > Applications > utilities and look for entries of the log at the time of freezing. Suspicious message here.

  Search before the journal entry that begins with BOOT_TIME since it is the first line of ahttp://www.crystalidea.com/macs-fan-control start

• Acer Aspire 5000 XP to Windows 7, cannot detect the audio drivers

  original title: Acer Aspire 5000 XP to Windows 7

  I recently updated my Acer Aspire in XP to Windows 7 5000. The process went well, but now he says it detects all audio devices. I checked the control panel and go to the sound section and it says that no devices are installed. Also, I am having some problems with graphics (a few black lines appear every now and then). I'd appreciate your help with this. Thank you!

  There are no Windows 7 drivers for your model, something that you should have checked before the upgrade.

  There are Vista drivers on the Acer site which may operate, but don't hold your breath...

  http://support.Acer-euro.com/drivers/notebook/as_5000.html

  If they are not, return your machine back to XP, if you want to keep all the features...

• Why my drive hard Boot keep reading and writing for 20 minutes after the start?

  As the title says my HDD Boot continues to read and write for about 20 minutes after the start. Read and write up to 10 GB in the process. I would say a good way to destroy a disc. I have not seen this behavior in any other OS.

  10.10.5 OS version

  Model: Mac Pro

  ID: MacPro3, 1

  Processor: Intel Quad-Core Xeon

  Number of processors: 2

  Total number of cores: 8

  (Vivid RAM) memory: 8 GB

  Any help will be greatly appreciated.

  Thank you.

  Check Console.app and see what happens.   Could be something of a time Machine for Spotlight indexing to a process of runaway of an OS X or a bug in the application.

• Key 3 C often does not work for several minutes after the start, the other keys work fine.

  I got am HP Pavilion 17-e049wm Notebook PC product #E0J75UAR for about 4 weeks now.  I bought it refurbished.  A week ago I started having this problem.  3, e, d and c keys do not work when I first start the computer all of the other keys work.  Nothing happens when they are pressed.   Sometimes I will restart the computer and they work again, other times they won't, but often will start working if I left the computer set for about five minutes after the start.

  The computer is spotlessly clean.  I've only used a dozen times or more.  Nothing has been spilled on the keyboard.

  Sounds like software for me, but what?

  I am running Windows 8.1 and no programs are running at startup, with the exception of a program start button, but the problem began weeks after installing that.

  Any ideas?

  FWIW, I called hp. They believed excluded material and had me do a full system restore. Problem persists... The things you own end up owning you they say... I guess it's doubly true if you own a hp laptop. Full day turned... One day closer to death. Thanks Obama.

• XPS 13 (9343) crashes minutes after the start of

  A week ago, my Dell XPS 13 running Windows 8.1 suddenly stopped working about 1-3 minutes after the start, then rebooted - just to keep crashing and restarting after a few minutes. Unable to understand what caused the problem, I did a clean install of Windows 10; that is, fitness and installing W10 bootable USB drive.

  After installing a few Dell drivers (wifi, video, sound), the problem returns. Same question; After connection, Windows seems to start as usual, then crashes after 1 to 3 minutes.

  The system is a Dell XPS 13 (9343), i7-5500, 512 GB SSD, QHD touchscreen.

  TIA for any help.

  -Robert

  The memory on this model is welded in - it cannot be deleted.

  If you haven't run a complete diagnosis of the hardware, F12 repeatedly at startup will help you do.  You can also watch to see if you have crash dump files (WhoCrashed is a good utility for their sight-reading).

• Acer Aspire V3 - 571G hang up when connecting to the internet

  Hello

  My Acer Aspire V3 - 571 G sometimes crashes upward and freezes when I want to connect to the internet or a network, for example when the network cable is pluged, and I turn on the laptop, he hung up on the Welcome screen. or when I want to turn on sharing, he hangs up. Now I use windows 7 and later, I used windows 8, and this problem in windows 8 has been exist, and the blue screen appeared. I bought this laptop about 1 month ago.

  Thanks for your help

  Problem has been solved, by unistalling IDM a page fault occur by IDM and couse to hang up system.

• Acer Aspire e 15 is unable to boot from the CD

  I bought an Acer Aspire E 15 yesterday and am relatively satisfied so far.  However, I have one caveat.  While I don't mind Windows, I prefer to use a Linux OS.  I burned a Ubuntu ISO on a DVD and rebooted the system.  Windows 10 has begun.  I rebooted, went into the BIOS and change the boot order so that the DVD player should be started everything first.  No power-, always loaded Windows.  I changed the boot for a legacy one sequence, and then nothing would start at all when you restart.  So I just had to go back and change back to where it was.

  I want to try it on a flash drive, but can't find it at the moment.  I think that if I could not start the DVD, it probably wouldn't start a Flash either, but will try anyway.  Upgrading the BIOS would make a difference?  I know that it is not recommended, but for me, not being able to boot from a CD to install the OS I use is a pretty big problem for me.  I googled and lift you on several Linux forums who have not been supportive.  You guys can understand a fix?  Thank you.

  If you try the way that the flash player, please use Rufus to create a flashdrive bootable with Ubuntu .iso

  Select FAT32 format and UEFI/EFI system partition scheme

• Hi, install SSD on Acer Aspire VN7 - 591 G-70RT and setting for the primary boot device?

  Hello

  I have an Acer Aspire VN7 - 591 G-70RT that came with a Western Digital blue 5400 RPM HARD drive which is limitation of my performance of laptops. I contacted Acer recently to ask for upgrades that might be made and they confirmed that I could build an SSD 256 GB and up to 16 GB of ram.

  I bought an SSD now and install, but I wanted to ask how I could continue on the definition of the SSD as my main drive.

  At this point, I guess I could install the SSD, then select it as primary boot device in the BIOS by pressing F2, and then install windows 10 via my USB. If this should be good to reboot or the existence of windows on my current HARD drive causes a conflict?

  Thank you

  I have the device works now and here's what I did.

  WEAR AN ANTI STATIC BAND:

  Step 1) remove all the screws on the underside of the laptop

  Step 2) use spudger or credit GENTLY lift a gap between the keyboard and the base, then use the credit card to slide slowly into the space to jump open clips, NOT FORCE.

  Step 3) (OPTIONAL) remove the keyboard connectors by moving clip and gently remove the cable from the Jack. However the HARD drive slipped in for me without necessary to detach.

  Step 4) unplug original WD HDD blue reversing the clip and disconnect the cable

  Step 5) close laptop together and boot with Windows 10 USB install

  Step 6) install windows on new SSD (for me windows automatically activated via the BIOS/UEFI) if it doesn't happen for you, simply re-attatch the original HARD disk.

  Step 7) if the activation is successful, again set HARD drive and original format. I have kept all the original ACER RECOVERY and Partitions (Healthy) in case I need to restore factory default, but formatted primary partition.

• I have an ACER Aspire One model ZG5/A150 can I put the card WIFI B/G card WIFI B/G/N

  I have an ACER / Aspire One model / ZG5 / A150 may update the WIFI B/G card for a WIFI B/G/N card?

  My system (Windows XP) will make use of the new speed of the upgrade card?

  If you are familiar with the process, yes you could upgrade the wireless card and Windows XP would be able to use the speed of upgrade, subject the new wifi card you select has Windows XP drivers available.

• Acer Aspire its problems after Win 7 Pro and the new installed HARD drive

  I have an acer aspire 8735 laptop g-6502 which has recently undergone a WD 500 GB drive HARD failure. I replaced that with a 7200 RPM Hitachi 1 TB drive and given that I don't have a Win 7 original used a disk Win 7 Pro with an extra friend.

  Windows 7 Pro and HARD disk installation went smooth. But now when I plug an HDMI cable to watch through my Marantz receiver, comes from the video, but I have to do manually the Marantz the default audio device for sound. When I unplug the HDMI, I must return to the parameters of sound and unenable Marantz and re - activate the Realtek audio.

  Before the drive died HARD, happen all perfectly when you plug the HDMI cable in and the fact to disconnect without any fiddling around with settings.

  I also have a few other questions:
  1. the touch volume control next to the numeric keypad does not control the volume more
  2. the keyboard key used to have a setting to display it. You can use two fingers on a tablet to drag the image to the screen bigger and smaller.

  I looked the site of Acer and also used my drive Application and drivers to reinstall everything that looked related to these issues. When first, I installed Win 7 Pro I let Windows find the appropriate drivers. It worked for some things but not others.

  Any ideas? I have a few scratches on my face and my forehead in frustration pain making me beat me here. Funny, but true, so all ideas are appreciated!

  Here's my screen design Mgr impression - there's an 'unknown' device IDK how to understand what it is.

  

  Hello...

  You have installed the application to launch mnager. Alternatively you can install from this link and check the function of touch volume control and display adjustment launch application manager

• How can I change it to English version my acer aspire one D255 window7 because it is in the language and Japanese characters

  I don't know how to change my aspire D255 in English language.it is in japanese.please help me... Thank you

  Looks like you bought it with the Japanese and want to just English from top to bottom.  Probably the best thing to do is call Acer Support and see if you can pay for the DVD of restoration.  This will not only get you on English, but you'll have the right support for future use.  I hope less than a hundred dollars.

  If you want to be darring you could wipe the computer and install Windows 7 English yourself.  To do this, you must ensure that there is a COA sticker and the key on the bottom of the computer.  25 letters in five groups.  Second, you must borrow a DVD of Win7 which corresponds to the version of Windows 7 on this sticker.  Home Premium, ultimate, whatever.  Then boot from the DVD, format the computer and install Win7 English.  When asked to activate, you need to use the 25-digit key.  If that sounds scary, it take to Best Buy or store and have them do you like 50 dollars.

• I have an Acer Aspire 5732Z who gets stuck in a loop in the splash screen before windows loads.

  When I run my laptop it will show the Acer screen with F2 F12 options then goes black with the cursor in the upper left corner and when windows should load it back to acer screen and will continue to do this until I got a smack on the side, and then it will load windows and run normally. I have created a disk image, bought a hard drive of ner, loaded my image on the new hard drive and it worked fine for a few hours to start and stop. Then he started to do it again and now I'm a little frustrated. Is there something I can do to fix this?

  If you hit your device so it can start something is not properly installed in your laptop. This could be the RAM modules or your hard drive. You will need to open and check all of the components that are in any way connected to the motherboard.

  There is another possibility that one of your components/devices of external periphery is cause of this behavior. Disconnect all external devices and check to see if that makes a difference.

• Aspire S7 - 392 stop every 30 minutes after the upgrade to Windows 10

  Hello

  My S7-392 stops after 30 minutes (exactly) to be on almost everytime (I normally use it plugged in). This problem became very regular after the upgrade to Windows 10. When I had Windows 8.1 it is happened, but not every day, it is now very regularly (like 90% of the time, he stopped unexpectedly).

  I also have experience in Mode without failure.

  There are no BSOD, no message in the event viewer, except that prior to the shutdown was unexpected. He has not collected from overheating.

  What should I do? This is known issue?

  Yes, there are some hardware or BIOS problem.

• Why not my Acer Aspire 5336, burn cd / dvd? I tried the update and uninstall drivers! I have

  Why my acer 5336 cannot burn CDs / DVDs on secondary storage (DVD/CD), its leaves is failing or simply the empty disc after burning process took place. It's very frustrating! Help, please. I want my acer to burn CD / DVD. Properties of my acer 5336: CD-ROM/DVD-ROM (standard CD-ROM drivers).

  It may be a problem with the software that you use or the laser on the optical drive can no longer work. I recommend performing a factory restore and then try to burn files to a blank DVD-R/CD-RW. I would try to copy certain files and images just as a test.