Acer aspire 5740-6378 will no longer charge the battery under Windows 7

Similar Questions

• Acer aspire 3820-7250 will no longer start. has frozen at startup, power off and now will not start.

  Windows 7 operating system.  tried system restore (all the recovery tools fail), tried the battery leaving aside all night, says now "no HDD found".  What should I do? What is wrong with him?  Should I try to boot from a USB key containing a boot file?  The big question is how can I recover my important files?

  Ok. Finally saved Rufus on desk, placed the iso HirensBootCD file on the desktop, used to burn it to a blank USB Rufus (by selecting the thumbdrive you want to use under "device", select "Partition for BIOS MBR scheme" for the partition scheme, select "FAT32" to the file, 64 k for "cluster size" system, then down 3 boxes must be checked.)  Make sure that you select "ISO Image" and click on the small icon next to make it burn your HirensBootCD.iso file, click Start, burn it, because of CD/HDD) then plugged the laptop thumbdrive is crushed, ensured he was set to boot from USB and good to go.  MiniXP selected and I'm now recover all my files from the HARD drive.   SO, this is the procedure to recover my data, thank God, but what is the solution permanently to repair the laptop?  He needs to have a new operating system installed?

• Battery charging port is no longer charge the battery.

  The charging port on the laptop seems to the eye, didn't notice any visible damage. I have to recharge my battery using laptop of her husband... We have the same type battery. The charger works fine.

  Any thoughts?

  Thank you

  Kit

  So much worse... spoke to a gateway tech and he told me the problem is the chipset that controls the loading or the port itself.

  Thanks anyway,

  Kit

• Aspire M5 - 481 T-6488 - does not recognize that AC is plugged. Will not charge the battery.

  Aspire M5 - 481 T-6488 - does not recognize that AC is plugged. Will not charge the battery.

  Laptop is about 2 years old.  Running on the Windows 8 origninal accompanying.  Had the same problem when it was purchased.  He sent to Acer.  Returned with no report / Details.  Has worked very well. Until recently.

  Noticed that seeing orange lights up when it feels like load and stops at 35% load.  Load is something dark, don't miss especially.

  Tried:

  Stick a PIN in the "battery reset" hole on the back

  Uninstalling the 'API Microsoft' battery

  Remove the battery to see if it'll work without it (it has an internal battery)

  Of course Acer won't help now since the warranty has expired.

  Please notify.  Thank you.

  Power plug has been checked, flinched 19V.

  Laptop briefly, then lost load capacity.  Checked power once again, 0V.

  Power adapter is bad.

• Acer Aspire ES1-511 plugged in, not charging ~ ~ Orange flashing

  I have an Acer Aspire ES1-511 and the orange light (flashes charge) and when I unplug the charger and the laptop stops and custom lights unless I plug in.

  Also, when I plug it in, it says "plugged in, do not load.

  If someone could help me, it would be great!

  Unfortunately, you will need to replace the battery. I give you the part numbers of the original batteries:

• Satellite A100 - will not charge the battery

  Hello

  I have ned to help. My Satellite A100 will not charge the battery. He works the power adaptor for the led indicates charging status, battery shows 1% of loading tatus information, but none does change - no loading any time. When disconnected everything just stops off like normal desktop.

  I've already put battery in and out, made upgrades to the antivir software, makes Toshiba controls, tests, but what ever he did did not any change. If there is no way for restoration of battery how to check what the problem is I have no second battery or AC I can always buy new batttery but I don't know if the old one is broken and weather new would work properly?

  Best regards
  pawelg

  Hi pawelg,

  I agree with the user above. The battery can be charged only up to 500 times, and after that, it must be replaced. I think it's the case now, I mean that everything works correctly on the AC adapter so I think that the battery must be the reason for this.

  By the way: you can buy a new battery to an authorized service provider. ;)

• Portege Z10 will charge the battery if connected Dynadock U3?

  Battery for laptop will charge while the U3 Dynadock docking station is connected to the laptop?

  Best regards
  Machines of Bede the venerable - Bochum
  Berni Debes

  No matter if the Dynadock is connected or not, s laptop adapter has to be connected to the laptop to charge the battery!

• Satellite A100 - 166 PSAA9E will not charge the battery

  Hello

  My laptop will not charge the battery.
  Although Windows Xp recognize the battery and says loading, the battery does not charge.
  I tried with a spare battery that I thought that the battery was faulty, with the same results.

  Strange thing is, when I turn off the laptop the power led remains lit and the blue, even without the power supply attached therefore discharge the battery.
  The battery led is still orange but not load!

  What is the problem with the laptop?
  Thank you

  Hello

  Generally, there are three possibilities;
  (1) the adapter is faulty
  (2) the battery is faulty
  (3) the logbooks electronic malfunctions (ESF)

  So now he of needed to check all these steps to find the fault.
  You said you've tried different batteries and AC adapter works too.
  So it is possible that there is something wrong with the electronic power supply

  In this case there is not much to do to contact the ASP in your country. Technicians should check the portable and should run diagnostics tests

  I recommend contacting the guys and ask for more details and manipulation still good luck and happy new year.

• Does not not on the AC adapter / CC, but it will charge the battery

  Hi all

  Little annoying it...

  The laptop can run on current alternative at all... but it will charge the battery while the laptop is turned off. If I remove the battery it will not work for flashing the bios seems to be a fruitless task.

  Any ideas what could be the problem? Some of my reading on this forum suggest a motherboard failure, but I bought this laptop as a reconditioned/end of the line of PC World model and I'm not sure exactly of my rights with this.

  Any help is very appreciated.

  Vaughan

  Hello

  Other people may be right. It looks like something wrong with the motherboard.
  Eventually it s a power supply electronic problem. but that's just a guess

  However, the solution is the same:
  You need a hardware technician who would like to know what part exactly malfunctioned and he would replace
  I think in your case it s a motherboard

• Satellite P100 - 10 p: how long should I charge the battery

  Hallo,

  Today I have a new Satellite P100 - 10 p and ID like to know for how long should I charge the battery. I checked the manual and it says that I must just connect the adapter on pc and enjoy.

  Can you please tell me how long should I charge a battery for the first time.

  Thanks in advance

  Jan Birsa

  Hello

  You must charge the battery until the battery LED on the front of the laptop appears in green (or blue)!
  It s advisable to run the empty battery before you resume the second indictment.

• LC - E6 quickly shows the flashing orange light. Will not charge the battery.

  The charger that comes with my new 5 d Mk III LC - E6 battery could not operate right out of the box. Would not load my new battery, nor any of my other Cannon batteries. Amber led flashes quickly.
  The old LC - E6 charger supplied with my EOS 7 d charging these batteries normally.
  I updated the scrapped charger delivered with my 5 d Mk III, and bought a new LC - E6 B & h. This unit has the same question. Sometimes it will load some of my batteries of Cannon, but more often the clear amber, after 20 seconds of just flashes quickly and will not charge the battery. My old charger LC - E6 Bill still all these batteries in normal mode.
  I use brand Canon LP - E6 batteries in these cameras.

  I followed the instructions found in the owner and guide online the site of Canon USA to charge the battery. The batteries are relatively new and show the good working condition on the information panel of the menu camera camera battery. These units (LC - E6) never worked properly.

  Tim,

  AC power removed normal home. All high-tech devices are functioning normally.

  As for replacement by Canon, I don't have the original invoices for this item, so I'm just going to buy another.

  Thanks again for your contribution.

• Satellite M100 will not charge the battery while the computer is on

  Hi all

  I have a M100 and the battery won't charge while it is running.
  The battery starts to charge when I plug in the adapter and the orange light comes on. 10 seconds later it stops charging.
  If the battery has more than 90% of the costs it wll the rest very well.
  I have three batteries that all do the same thing on this computer. All three batteries are working fne on my other M series.

  When the computer is off, it loads very well.

  Why is it so?

  Hello

  I think that the problem of charging the battery is about the problem of portable equipment.
  Maybe it's something s wrong with electronic power supply or another part on the motherboard.
  I doubt that the problem could be solved by updating the BIOS but you should definitely check if you are using the latest version of the BIOS update and test again
  If that does not help, then you should get in touch with a local service for verification of equipment technician

  But note; If it s the question of the motherboard, the motherboard needs to be replaced and it would be a costly affair

• How long should I charge the battery first?

  Hello!

  I would like to know how many time I charge the battery the first time...
  So, my laptop is new, but the battery's discharge after an hour, the power manager is installed...

  Site Web of Toshiba said I have work with laptop for 2 hours...

  Hello

  Battery charging time depends on the laptop model.
  But you must charge the battery until battery LED appears in green.

  Also battery life is also depends on the use of the laptop.

• Re: This option is available to charge the battery?

  It is rather a general question, although I use now L500-226 laptop running Windows 7 Home Basic.

  One of the main reasons, I continued using PC instead of the battery of computers (as laptops) is their need (laptops) periodically remove the charger and then reinsert it when the battery is low. Otherwise, keeping the charger is still plugged, the battery would suffer in two ways:

  1 - where the loading stops, the battery will not be able to restore full capacity for the first time. Of course, if the charge process to full discharge then to a low level is repeated once again, internal chemical reactions of the battery could be reactivated gradually to a good extent.

  2. in the long term, keep the battery in full charge State also decreases its MTBF (Mean-Time-Before failure).

  As we all know, the process of charging the battery to full then shock it in an optimal level of low could be repeated automatically by the software.
  Obviously this option must be set by the user first. In this case, there is no need to unplug the charger.
  And only when the user has to take the laptop where the voltage of the network are not available on request, this option would be disabled to avoid discharging the battery automatically.

  Does anyone think that this option is already available in some new Toshiba laptops and maybe L500 models?

  To be honest, I was told that the large companies in the world that produce batteries games can get significant extra revenue of the replacement of the battery packs in shorter periods. But in my opinion, the majority of PC users replace their PCs with laptops that are implementing the battery above, option since they will not have to pay each year (at best) to replace their relatively high price (specific for the manufactured product!) battery pack.

  Any idea?

  Thank you.

  This option is not available. All works automatically, and as the Akuma wrote, you should disconnect manually.

• How to charge the battery if the power input is damaged?

  The decision-making power on my 4070CDT satellite was damaged and the laptop will no longer take power or charge the battery from this socket. (Attempts to re - solder the joint damaged power detection circuits!)

  Does anyone know if I can feed the appropriate voltage (10.8 v?) to the battery contacts in the battery casing to keep the laptop going, and if so, which comes into contact with and what tolerance on the voltage?

  (Application of 12v through the + ve and a particular contact - EV seems to persuade the power management software, it runs on sector without battery, but after 20 seconds the laptop turns off.)

  Any ideas? Thank you.

  Hello

  In my opinion to do something like that, you have to be an expert and know very well the construction of the motherboard and electronic load.

  Sorry, but I don't see a great chance to do that successfully. Try to contact the Service partner. Perhaps, they can give you a useful tip.

  Good luck!