ACER ASPIRE E5-511-ADD DEVICE USING THE UEFI BOOT.

Similar Questions

• Satellite Pro C50: Installation of Win 7 using the UEFI boot mode

  I want to install Windows 7 Pro 64 bit on Sat Pro C50 (downgrade if you like - comes with 8 win), but I want UEFI boot, with GPT partitioning.
  I'm happy wipe existing partitions if that solved the problem.

  I have disabled _have_ Secure Boot.
  Win 8 install DVD boot works;
  CSM boot and boot from Win 7 DVD works - but this is not what I want.
  Definition of return to the UEFI boot and install Win7 boot media - hangs on "Starting Windows" screen
  Media _is_ good, works well on the PC manufacturers.

  I'm not convinced that it is a problem of Microsoft.

  Hello

  On Toshiba laptops, where the UEFI BIOS is available, it of necessary to disable secure boot and change the boot to the CSM mode in order to boot from external sources and install systems other than Win 8 or 8.1 Win

  Of the workarounds in the internet described the installation of Windows 7 in UEFI mode but I doubt that this will be possible on Toshiba laptops because the BIOS is different and modified for each series of laptop.

• Acer Aspire 7750 G blue screen using the Explorer

  My Acer Aspire 7750 G crash blue screen 100% of the time if I move the mouse to the internet explore (big E) in the task bar.  Error is still the same program, causing the crash is igdpmd64.sys.  I am running windows 7.  This program is apparently associated with the HD graphics but this laptop has a built in graphics card (as purchased) whichis a Radeon HD 6650 M 1 GB) I checked all drivers for updates.  Apparently, everything is up-to-date.

  Someone at - it suggestions?

  Hi DWM

  I found some info here, regarding Windows Update KB2670838 - he suggests to remove this update, then disable it reinstall should solve the problem.

• HDD not found/detected when using the UEFI Boot

  I have a HP Sleekbook 15-b035tx, which came with a windows 8 OS already installed. a few reasons, I tried to quarterback to windows 7. After several unsuccessful attempts, I finally managed to install windows 7 by changing my boot for a legacy starting sequence.
  later due to lack of drivers for win 7, I installed, instead upgraded to win 8 running on existing startup (using the MBR if im not wrong). now, I want to install a new copy of victory 8 with UEFI, but the problem is when I change my boot sequence disable startup inherited, then installing win 8, I do not see my HARD drive ... im using a flash drive to install win 8 which is already in the UEFI (I used diskpart to do this).
  also, when I use legacy boot and try installing windows, then the HARD drive is displayed and when I format the HARD drive and create new partitions, he created 3 partitions (System, MSR), reserved and the fourth for the OS. I tried to install the windows like this, but after installation, when I change the boot sequence in the UEFI even once, it does not start

  now I want to install windows in the UEFI... and I really need help with this please ... I hope I explained the scenario... If someone wants to ask anything, please don't ... as I really need this out... and also, I would like to ask that how can I check if my HARD drive has been changed from MBR of GTP

  Hello:

  I can't find the specifications of product for your model - only these introduce yourself.

  http://h10025.www1.HP.com/ewfrf/wc/pfinder?cc=us&DLC=en&LC=en&tool=&query=15-b035

  They all have Intel hardware with an nVidia GT 630M graphics card.

  If yours has the same characteristics, you can install W7 64 bit there without too much difficulty.

  I know where all the drivers.

  If you do not see the HARD drive normally you must load the sata drivers.

  See if it works in uefi mode...

  Download the drivers from this link below (first or second file listed - 32 or 64 bit depending on the case).

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&ProdId=2101&DwnldID=23060&keyword=Intel+RAPI...

  Extract the files on a usb flash drive.

  With the flash drive and the installation of W8 media plugged into the machine, boot from the installation of W8 media.

  After selecting the install now option, select the training - Advanced menu, Options and select the option load a driver.

  You should now see the storage driver files listed.

  If you check the box, it only includes the compatible driver.

  Follow the prompts and I hope that the W8 should install.

  If this does not work, and no one else can help out you, let me know if you want to install W7 x 64 on and I'll guide you installed the drivers you need.

• Satellite C50 - B with Win 8.1 - PXE error is displayed using the UEFI boot mode

  I have a laptop of C50 - b under Win 8.1 and recently needed to boot from a USB stick so finally found the way to do it (missing the start of the first bios menu) and managed to do.

  My problem is same when I returned in the uefi and set the boot order local drive, cd, network, he asks every time that I want to start PXE IP4, IP6 then IP4 and IP6 again. I also disabled secure boot

  I think that a value is missing, when I went to the BIOS and return to the start of IEFU option, but where is the laptop get the setting to tell him to network/PXE boot when the bottom of the list and the wake we LAN is disabled.

  Exactly, secure boot must be enabled in order to boot from the internal HARD disk where the 8.1 for Windows has been installed.

  If you want to boot from external sources (IE USB flash memory stick) you will need to disable secure boot.

• Want to make my Acer Aspire X 3475 able to use the connection to the wireless network

  How should I do and what wireless adapter to use? Modem/router is Netgear CG 3000.

  Hello

  I recommend the TP-Link boards PCIEx1 for your office.

  For example, this model: TP-LinkTL-WN781ND (including regular support and a low profile support).

• Acer Aspire E5-511-P7SJ reinstalled with windows 7 32 bit. Brightness of the screen does not

  I use Acer Aspire E5-511-P7SJ windows.81 preinstalled. The system had Intel HD Graphics. I formatted the system and load windows 7 32 bit. After windows 7 installed, I am not able increase or decrease brightness.

  How can the problem be solved?

  At present, the system has Standard VGA Graphics Adapter. I tried and it driver from this link https://downloadcenter.intel.com/ /23763/Intel-HD-Graphics-Driver-for-Windows-7-8-8-1-32bit HD graphics card

  When installing, it says "the computer does not meet the minimum requirements to install the program.

  What are the solutions? Please advice

  Hello

  Have you tried the Intel HD graphics driver for Pentium N3540:

  J1750 processor Intel® Pentium® /J1850/J2850/N3510/N3520/N3540 N2805 / N2806 / 2810/N2815/N2820/N2910/N2920/N2940 n with Intel® HD Graphics

• Acer aspire es1-511-c665

  I have an acer aspire es1-511-c665 laptop with windows 8.1 on the right side of the laptop has a cover of the device that will fake CD cd/dvd drive Bay.  can I remove this cover and open the acer to install a reader of cd/dvd internal of my toshiba satlight lap top which has windows vista and if I can install the toshiba player what other equipment or drivers will be I need to do.

  You can install the optical drive with below mentioned specifications.

• Screws missing Acer Aspire ES1-511

  Hello so I have an Acer aspire es1-511 they are outside of the merits of the case and I'm missing about 3 screws do you know what size are they? or where I might be able to get a few screws of this size? I understand that you're not suggesting 3rd party but I really need to do. A little, I prefer to keep my thanks own technolagy for that meet. also do you know if a M2.5x8mm screw would hold? I am from, Alberta, Canada

  Can be here but 50 pieces for 6CAD + free shipping.

• Upgrading memory on my Acer Aspire ES1 - 511

  Hello, of course I could use assistance change memory on my Acer Aspire ES1-511.  It has 4 GB, but I really could use 8 GB

  
  

• Acer Aspire ES1-511 plugged in, not charging ~ ~ Orange flashing

  I have an Acer Aspire ES1-511 and the orange light (flashes charge) and when I unplug the charger and the laptop stops and custom lights unless I plug in.

  Also, when I plug it in, it says "plugged in, do not load.

  If someone could help me, it would be great!

  Unfortunately, you will need to replace the battery. I give you the part numbers of the original batteries:

• Acer Aspire E5-511 thought, it was too good to last. Laptop turns off when loading?

  The battery fell to 65% so I plugged in and turned on the charger, the screen went white and laptop off.   Laptop and charger switch off will be on again.   Catch 22 situation.   I'm starting to regret buying an other Acer Aspire.  Would be grateful for the help?

  Machine took to curries, Ollie fixed in a few minutes, the fault due to the update of Windows 10 and pilot - fixed by adjusting the brightness.

• Hi, I have an acer 7739G and I want to use the construction in camera, but I don't know how to put on... help please!

  Hi, I have an acer 7739G and I want to use the construction in camera, but I don't know how to put on... help please!

  Hello

  Search for information to Acer.

  http://support.Acer.com/us/en/default.aspx

  See you soon.

• Satellite C650D - 12 c no bootable device - insert the diskette boot & a press

  Hello

  I have a C650D that worked very well in a week ago.
  Stop ok, it refused to start at the next startup.

  It comes up saying "no boot device - insert the diskette boot & press any key".
  So I blocked a recovery bootable dvd and the same thing came, but although the dvd player "trembled" when I inserted the disc, it does not seem to watch it at all when I rebooted.
  I rebooted again & you press F12 to check the boot order. 1st is usb, then cd/dvd, lan, floppy, then hdd/ssd drive.
  I chose cd/dvd and then a wait of a few seconds, he says ' disc error has occurred. Press ctrl + alt + delete to restart.

  As well the HDD & dvd player display correctly in the bios.

  I plugged a usb dvd drive, put in a recovery cd, rebooted & it started to boot from the USB, but then stopped doing anything after that the first bit of the info came on the screen.
  I tried several bootable CD and they all do the same thing. They begin the startup, then freeze. For example, if I put in an XP installation disc I get - "Press any key to boot from the CD" usb (one), then "Setup inspects your hardware", then a black screen.

  For example, I tried to change anything that could help in the bios, the SATA controller mode, but nothing has no effect on the situation.

  Any ideas, anyone please?

  Thank you very much.

  EDIT:
  I just tried to boot from the USB stick with the hard drive removed from the system and the boot process continues normally. If I try and boot from the internal dvd player if he still doesn't see any disk...

  > I just tried to boot from the USB stick with the hard drive removed from the system and the boot process continues normally. If I try and boot from the internal dvd player if he still doesn't see any disk...

  This means that if you remove the HARD drive, you can boot from the USB flash drive, but you cannot boot from CD/DVD drive even if the HARD drive is removed?

  It seems really strange, but I think this means that either the controller SATA on the motherboard is defective and therefore it is not possible to boot from CD/DVD or HARD disk drive. Or it could also be that the ODD and HARD drive is malfunctioning. But it would be really strange that the two aircraft would begin to malfunction at the same time

  So maybe the second idea is not true however, it means that something has happened to the motherboard.

  But try this: access the BIOS by pressing F2 at the beginning. Now set to the default settings by pressing on F9 and then save the changes by pressing F10.
  Now try to start it again using a recovery disk

• IM 10 atm installation initiated Preview and I want to know: is it easy to use the dual-boot functionality, if I have 2 hard drives

  Hello!

  IM 10 atm installation initiated Preview and I want to know: is it easy to use the dual-boot functionality, if I have 2 hard drives? I have win7 on my main drive (SSD) and I want to install 10 preview initiated a new partition on my 500 GB hard drive, I created. I'll have to change smth in the bios menu, or I will be asked to choose between win7 and win10 in a menu after boot?

  Yes, it's, it's just like installing Windows on another partition.

  To learn more:

  http://answers.Microsoft.com/en-us/Insider/wiki/insider_wintp-insider_install/how-to-dual-boot-the-latest-Windows-build-with/9695dfc7-1C13-4D8D-B10B-587e78c6ac36