Satellite C650D - 12 c no bootable device - insert the diskette boot & a press

Similar Questions

• Re: Satellite L350: media test failure - no bootable device insert boot disk

  I just started a new Sat L350 upward and I can not go beyond the second page that says; Media test failure and no boot device, insert the boot disk and press any key.

  I have no disc and I'm stuck,

  Help!

  Hello

  This error message appears because the BIOS didn't not find a bootable device containing an operating system.

  What of the HARD drive? Is it recognized by the BIOS?
  Check in the BIOS settings; Press ESC and F1 to access the BIOS.
  There, you should check if the HARD drive (all details of the HARD drive should appear) is recognized.
  If this isn't the case, then it means that your HARD drive is dead and so you cannot boot from the HARD drive.

• Try to install Windows 7 via USB, El Capitan, Macbook Pro 2011 but get this error "No. BOOTABLE DEVICE - INSERT BOOT DISK AND press ANY KEY ' when bootcamp restart my macbook to begin the installation. Any ideas?

  I am trying to install Windows 7 via USB, (El Capitan, Macbook Pro - early 2011), but this mistake "No. BOOTABLE DEVICE - INSERT BOOT DISK AND press ANY KEY ' when bootcamp restart my macbook to begin the installation. Any ideas?

  You cannot use a USB on Mac 2011 Installer. Please burn the ISO on a physical DVD Windows (a DVD - R Carbon SL on the rate of burning slower is better) and use it to install Windows. The file Info.plist changes only allowing the creation of USB, but does not fully support a USB Installation.

• When I turn on my laptop it goes straight to no bootable device insert boot disk which I do not have?

  When I turn on my laptop it goes straight to screen blk which then no bootable device - insert floppy to start IE, which I did not

  You burn your set of recovery disks? If so start with them. No recovery set > Contact HP to order a set for a small fee.

  You can enter the BIOS by tapping /holding F10 key immediately after turning the power on and use Diagnostics to test your hard drive.

• no boot device - insert the boot device and press a key

  I am computer purchase hp laptop for 2 days. in my laptop suddenly occur in the virus so I am recovery os DVD in the driver cd and dvd are running then suddenly second writing system is interrupted and automatically power off. Why do I admin please

  I am open to my laptop and press the login button then display automatically the no bootable disk - please insert the startup disk and press a key and then in my point of view what I say

• Yoga 2 pro - lack of default boot device or startup failed. Insert the recovery media and press a key.

  Hello

  I have a Yoga pro 2.

  I recently formatted my drive and got rid of all partitions. The reinstalled windows 8.

  Everything worked well until I went into the bios and changed the legacy boot uefi support.

  I get this is now pop up when I boot.

  By default, lack of start-up or start-up device failed. Insert the recovery media and press a key. Then select "Boot Manager" to select a new device boot or boot recovery media.

  I have no support from reccovery.

  I tried to restart the mchine pressing F2, but I still get the same screen.

  If I press on enter I then move the pop up to the Boot Manager when the list is empty, so I can't start any other readers because there is not to choose.

  I don't know what else to do...

  Help, please.

  SEB

  Mod edit: System model added to the subject line to improve visibility / clarity

  Shut down the laptop computer

  Press the NOVO button to start

  Select Configuration of the BIOS in the menu that appears

  Return to the legacy

  Exit saving changes

  Restart and check.

• Is "PXE - MOF: PXE ROM. exit" then below I don't get, "No Bootable Device - Insert Boot Disk and press any key any" why?

  I bought the lifetime windows, defender security system, I also downloaded the windows repair and ran it, I even cleaned my c drive and defragmented, but I always get the same black screen. This is what it looks like.

  PXE - MOF: Exit PXE ROM.

  No boot device - insert boot disk and press any key

  /} In this area here, I slash turns clockwise

  Does anyone know how planned it and most importantly, how to prevent?

  Try to change your startup settings for...

  1 CD-ROM
  2 USB
  3. HARD DRIVE
  4. (if available) floppy drive
  5 LAN.
  You can change it by pressing the button shown next to "Boot Order"

• Don't check the cable connection no bootable device insert boot disk

  I have a laptop Aspire 5733Z which sometimes gives me the message above. When that happens, I leave it alone for 3 or 4 days and when I turn it back on it works again. I went once to a technician, but when I arrived, my laptop was working fine. I noticed that if I ask to work with Mozilla Firefox or some complex video sites, it crashes how can I do to get a boot disk? or fixing the problem?

  Hello...

  This could be an internal hardware problem, this message usually when the hard drive is not detected by the BIOS.
  What HARD drive is not detected that the system is not a starter and promts to insert the startup disk.

  If the computer is under warranty, it is better to sedn inside to get the problem resolved.

• no boot found device, insert the boot disk and press any key

  Hello, recently tried to install Windows 10 through the Assistant Boot Camp, with the help of a DVD I bought windows. But I get an error saying "no devices found Boot insert boot disk and press a key" I tried to read and do all the patches, all offer and yet no results. Any suggestions or corrections us would be great!

  MacBook Pro mid 2012

  -i7

  Evo - Samsung 500GB SSD

  -Ram 16

  -Latest version of Mac OS x

  -L' use of 64 GB PNY flash drive

  Your Mac 2012 supported creating a USB Installer to help BC Assistant. Do not use a DVD, a USB Flash drive. Your USB drive must be a USB2 flash drive, if you choose the USB mode and you will need a Windows ISO.

  See also create an ISO image for Windows - Apple Support installation media Boot Camp .

• NO BOOT DEVICE - PLEASE INSERT the STARTUP DISK AND press a KEY ANY * please help *.

  I have a Compaq CQ-50 that worked very well. It has been upgraded to winows 7 Bonus a year ago. This is the message I get when I press the power button

  NO BOOT DEVICE - PLEASE INSERT THE BOOT DISK AND PRESS ANY KEY

  any help would appreciated more than you know

  Hello

  Have you tried to reinstall the hard drive if yes. Then the drive is bad & who has need of a replacement.

  If your laptop is still under warranty, contact HP and arrange for the disc replaced.

  If you are out of warranty and would like a guide to replacing the hard drive yourself, let me know.

• Re: Satellite P200-1EE - displays an error message in the windows Boot Manager

  I left my laptop alone and down for a few hours and when I'm back on him shows an error message in the windows Boot Manager.
  It says unable to start windows and a recent hardware or software change might be the cause. It asks me to insert my windows installation CD, and if I n t have the CD then to ring for help but unfortunately I really can t find a number at the present time.

  It also reads this:
  File: \BOOT\BCD
  Status 0xc000000f
  Info: an error occurred trying to read the boot configuration data.

  Does anyone know how to deal with this, or this happened to anyone before?

  Hello

  Maybe this article can help http://support.microsoft.com/kb/927391

• Problems become more problems... DISK BOOT FAILURE, INSERT THE FLOPPY DISK AND PRESS ENTER

  I recently had a question on my toolbar menu and begin to disappear.  While I was trying a number of different ideas through forums, I myself in another problem.  Now my computer boots but windows never start I just get a screen saying: "FAILURE of STARTUP DISK, INSERT the DISK AND press ENTER.  It worries me because my computer never came with a CD-ROM it was all preloaded when I bought.  Can anyone help, thanks

  Home premium Windows Vista, 64-bit operating system

  Hello

  Here are the different ways to reinstall Vista

  Contact the manufacturer of the laptop computer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  ____________________________________________________________

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  __________________________________________________________

  or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  ____________________________________________________________

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• Satellite C855-1RP fail/no bootable device media?

  My 2 years old Satellite C855-1RP crashed yesterday and now will not start?

  I get the fail check standard support and no boot device.
  I can't get into the bios and by disk HARD she shows none?

  I changed the boot parameters to the csm found in the forum, but which does nothing.

  Sometimes I have the password for hdd/sdd?
  It came pre-installed with Win8 and I don't remember it asks me a password hdd/sdd create Setup?

  I checked the disk hard where it was losing, but it's not.
  I put a hard drive of a computer dell laptop work in but who had the same answer, don't know if it is compatible if.

  Then I put the disc in the computer hard toshiba dell laptop, but the new medial check fail.

  Any help would be greatly appreciated.
  All my pictures from my baby for 9 months of birth are on the laptop so I really need to make it work.

  If the disk HARD isn t appearing on the first page of the BIOS, it means that the HARD drive was not recognized by the BIOS, and in most cases, this means that the HARD drive is faulty.

  From my point of view of a few you need to replace the HARD drive.
  Then you must install the new system using the Toshiba recovery media.

  In case you have not created this recovery (recovery or USB flash memory stick drive) media in the past, you can try installing the OS using another disc (from Microsoft?)

  But where you would choose Win 7 system, you must disable secure in the BIOS startup and you should pass the CSM UEFI.

• My Toshiba laptop error: No. Bootable device-insert boot disk and press any key.

  When I put the bootable disc in I lost all my data. Now the problem is that I have a disk of Home Premium Windows 7 64 bit with product key number. This drive doesn't have SP1 on it, and when I tried to load the disc the message was that he could not install this drive.  This hardware of computers may not support booting to this disk.  Make sure that the drive controller is enabled in the Bios of the computer.  (I don't have the original software provided with the purchased used laptop computer).

  I called Toshiba and they said I needed a new drive and it would install for $149.00. I did not pursue it.

  Is my question there a way to get a Microsoft update disc that includes the original as well as the Service Pak data? I see several option on the web site but do not know what I can do.  It seems to me that everything I need is the service pak but cannot load the original software. Is there something in the BIOS I can change?

  Or is there another solution without buying all new software.

  Thank you

  Pickle, farmer

  Your PC Toshiba laptop includes a manufacturer recovery partition, and unless you have screwed up the hard drive, it should still be there and accessible...

  That's how access you... For Toshiba, press and hold the "0" BEFORE and during power-up Need you options recovery and overall the machine back exactly as it was when you bought it first.

  Several updates and hours later, you would still have a working machine. After re-installing your programs preferred and your applications, you must use the data backups made to recover what you have done on the machine since...

  It takes a lot of time, but it all works.

  An alternative...

  You can download a Windows 7 ISO, Windows 7 downloads , create a boot from it and pure media install Windows. The only catch here is that you must be able to read the sticker COST on the machine, the version of Windows and the key code. Then you re - install your favorite programs and do data backup procedure as above.

  If you have no backups of data or copies elsewhere and your Windows does not start, you need to make the drive of the machine, connect to another and copy the important of her data files, then place the player to the original host, using one of the methods above to re - install Windows...

• PXE - e61: media test failure, check cable__pxe-m0f: exit pxe rom__no bootable device - insert boot disk and press any key

  My boyfriend knocked over a glass of soda on my laptop and it had the same error message for always, I'm not terribly computer savy, but 'shop' means they want 200-275 to fix! Help!

  It would seem that you have a hardware problem, caused by the spilled liquid.

  Hardware issues are beyond the scope of these Forums.

  I suggest that you take it to a reputable repair shop, computer room.

  See you soon.

  Mick Murphy - Microsoft partner