Model number:-15-n010TX: windows 8.1 update

Similar Questions

• How can I fix a printer model number misidentified by Windows 7?

  Windows 7 identifies my printer HP 970se and shall immediately proceed to install the driver, whereas it is actually HP 970cxi.  How can I fix the model number before you install the driver?  Unfortunately, a downloadable driver is not available for this printer for Windows 7 (64-bit).  Windows 7 does have more the driver for it because once I had the opportunity to choose between these two models, but I'm not able to reproduce this particular circumstance.  Can someone help, please?

  I tink you find that printers are the same but designated for different markets.

  Fact the installed Windows 7 driver does not work?

• I have a VGN-FW290 laptop, I installed Window Pro 8, are there drivers update for my model number

  I have a VGN-FW290 laptop, I installed Window Pro 8, are there drivers update for my model number

  John_Miller53,

  Unfortunately there is no Win 8 driver for this unit on our esupport.  There are Win 7 drivers but I don't know if it will work or not...

• Update the series/model number in the BIOS (ThinkPad 2nd Gen Helix)

  Hello! I have a ThinkPad 2nd Gen Helix (model 20CG000QUS), I replaced the motherboard in (because I'm with a Lenovo authorized service depot), but I'm unable to update the series/model number in the BIOS. I tried the utilties USB and bootable diskette and nor will not work (I can't boot from either one sense). This is despite me turning off the Secure Boot option in the BIOS. When I enter my credentials for the key to maintenance/diskette, I find the download ok in, but on the page for the supported systems for this key maintenance/diskette, the Helix model I have is NOT LISTED. I tried to update using other utilities and I get the words of INVA LID, and I can only replace the "LID". So, basically, I'm stuck.

  Any suggestions? Thanks in advance.

  PM sent

• How to update the model of RDS for Windows Server 2012 collection?

  Hi team,

  I want to know how to update the collection of RDS model (model master sysprep) which is used to create the collection?

  I tried the below way but did not get the update of the collection of virtual machines.

  -Start the image of mater of sysprep

  -install the required components

  -resysprep the image and stop it

  -East went to the RDS Collection and added new virtual machines in collection (removed the old his)

  Once created, I opened a session in the machines, but I don't see the updates (I installed some software in the sysprep image however and no is not there in the virtual machines in the pool)

  Can someone let me know if I need to create a whole collection again or the way I do it is a proper way? If it's a good way what could be the reason why I get the new installed software model sysprep image in virtual machines created in the pool, based on the model?

  How do we actually updated for security and other regular patches updated in virtual machines? In my view, we use the same approach?

  Any suggestions will be appreciated.

  Kind regards

  original title: Windows Server 2012 RDS - model Sysprep update process and collection of creation

  Hi MS Expert 2010,

   

   

  I wish that you post your question in the TechNet Forums as it is addressed to an audience of it professionals.

   

  Check out the link-

   

   

  TechNet Forums

   

  Hope this helps!

   

• I am running Xp SP2 Windows does not update anything more and gives me [error number: 0x8024400A] Why can't update Windows again?

  I am running Xp Sp2 and about a month, there are, I tried updating to SP3 (new) and it sends my computer fits in. It keeps just reboot and reboot (SP3 has always done this has my computer since its release). I had to do a cover of the plant to return to the place where he could start normally but now Windows does not update anything. I go to Windows Update, it goes through the motions of checking to see if everything is legitimate, click the express button and gives me "the website has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem. [Error number: 0x8024400A]   After going through the links provided and find no solution the last link sent me here. So why can't update Windows?

  Hi kriplurr,

  Thank you for keeping us posted about the State of the question.
  I'm glad you are able to run the updates.
   
  You can download the Windows Installer under the following link and check.
  Windows Installer 3.1 v2 (3.1.4000.2435) is available
  seehttp://support.Microsoft.com/kb/893803
   
  Or you can download it directly at the following link.
  http://www.Microsoft.com/en-US/Download/details.aspx?ID=25
  (a) click on the above link.
  (b) click Download next to WindowsInstaller-KB893803-v2 - x 86-.exe
  (c) install and check.
   
  Hope this information helps.

• Windows XP pro update page 0x8024400A error number

  I'm on my pc Windows XP pro and since I format, distribution it over and over and then re install Windows XP pro again and again (9 or 10 times) in the last week.,.

  I can't work Windows XP update page.

  I get "" error number: 0x8024400A this website has encountered a problem and cannot display the page you are trying to show. ' "

  All suggestions on this site of Microsoft points people he difficulty page.

  How to practice, this will not work unless Windows XP SP3 is installed.

  Is there something silt, then this thing stupid construction of Microsoft, to find the solution on how to solve an error with windows XP pro updates?

  I just don't feel the HD reformatting and waisting my time again and again when I have the same problem each time.

  BTW, someone read this if you have to re install windows XP and plus size your time by signing up immediately as you will certainly have to start over and over again!  MONEY IS good TIME BILL! Laughing out loud

  Hi phoe_nix,

  (1) what is the update that you are trying to install? I would like to the KB article number.
  (2) what are the troubleshooting steps you have tried to solve this problem?
  (3) did you change on your computer recently?

  I suggest to try the steps in the following link and check if it helps.
  You cannot install updates from Windows Update, Microsoft Update, or by using the auto update after a repair of Windows XP after installing Windows XP SP3 immediately after a clean installation of Windows XP SP2 or

  http://support.Microsoft.com/kb/943144

  Hope this information helps.

• I can't update my windows xp (windows or microsoft update) service pack 2... When he attempts indicates the error number: 0x8024400A

  I can't update my service pack 2 for windows xp (windows or microsoft update) after formatting... during the attempt, it displays the error number: 0x8024400A... Please advise

  Hello

  1. is the service pack 1 installed on your computer?

  2 has there been recent changes made on the computer before the show?

  Please follow the steps mentioned below and get back to us with the results.

  Method 1: Temporary connection error may occur when you use Windows Update or Microsoft Update.

  http://support.Microsoft.com/kb/836941

  Warning: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Note: disable the Windows Firewall and antivirus may make your computer (and your network, if you have one) more vulnerable to damage caused by worms or hackers.

   

  Method 2: I suggest you perform the clean boot and check.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  After you have used the boot is a way to solve your problem, you can follow these steps to configure Windows XP to start normally.

  a. Click Start and then click Run.

  b. type msconfigand click OK. The System Configuration Utility dialog box appears.

  c. click on the general tab, click Normal Startup - load all services and device drivers and then click OK.

  d. When you are prompted, click on restart to restart the computer.

  For more information, please go through the link below.

  For Windows XP Service Pack 2 installation procedure

  http://support.Microsoft.com/kb/875364

  I hope that helps!

• I get the error number: 0x80072EE2 when I try to run windows or microsoft update under Win xp

  I get the error number: 0x80072EE2 when I try to run windows or microsoft update under Win xp

  Hello

  I suggest you try all the steps in the following article.
  You may encounter temporary connection related errors when you use Windows Update or Microsoft Update to install updates.
  http://support.Microsoft.com/kb/836941

  I hope this helps.

• Windows XP & Office update error - error number: 0x800A0046

  Windows XP & Office Update error

  When I try to update, I get the following error.

  [Error number: 0x800A0046]
  Please change your Internet Explorer security settings
  To save the changes made to the settings of this Web site, you must enable the for Internet Explorer userdata persistence. Follow the steps below, then click on change settings on the left and try to save your changes again.
  1. in Internet Explorer, click the Tools menu, Internet Options.
  2. click on the Security tab, click the Internet security zone icon, and then click Custom level.
  3. in the settings dialog box, scroll down to the Miscellaneous section.
  4. persistence of Userdata, select Enable.
  5. click on OK and when the security warning dialog box appears, click Yes.
  Learn more about the measures to take to solve this problem (0x800A0046 error number) yourself.

  I tried all the suggestions of Microsoft and others as follows:
  http://support.Microsoft.com/kb/836941
  Verification of Conficker
  http://www.Microsoft.com/security/PC...Conficker.aspx
  security/scan
  http://www.Microsoft.com/security/SC...s/default.aspx
  Avast ran
  Ran SUPERAntiSpyware
  Malwarebytes' Anti-Malware ran

  Hi Skos1,

  Try resetting IE, follow these steps: http://support.microsoft.com/kb/923737

• I can't install Windows 8 on my Asus (model number: U56e)?

  I have installed the Windows Upgrade Assistant, went through the whole purchase Windows 8 Pro and uninstalled all unnecessary programs, which were Norton Symantec and Wifi Intel ProSet software.

  After that the screen turns blue and it says at the top that I have to wait a while, and the computer may restart several times.  But before it restarts it stops at 90%, every time that I tried this happens.  Is there something that I remember to do at some point?
  Again, for my Asus model number is U56E.  Help, please.  I already paid for it, and I wouldn't claim because I'd love to have Windows 8.

  You may want to consider choosing the option "Keep personal files only" do the upgrade. Can a faulty application or driver prevents the upgrade to complete successfully.

  Besides being able to keep your Windows settings and personal files, you can keep your personal files too during the upgrade to Windows 7. If you choose No, Windows 8 place your files in a folder named Windows.old.

• In the course of my recent upload Lightroom 5 on my Macbook I bought recently with the serial number of the disk that I bought the year last for my Windows PC (an update of Lightroom 4) of the license.  I have an error message "you entered the serial numb

  In the course of my recent upload Lightroom 5 on my Macbook I bought recently with the serial number of the disk that I bought the year last for my Windows PC (an update of Lightroom 4) of the license.  You receive an error "the serial number you entered is invalid."  Why does CC not recognize this as a serial number valid?

  Soyouca how did you install Photoshop Lightroom?  Please uninstall the current installation by using the uninstall program located in Applications/Utilities/Adobe Installers.

  Once Photoshop Lightroom is deleted please download a new copy of the installation files of Adobe - Lightroom: for Macintosh.  The update contains the full installer then please download the latest version of Photoshop Lightroom 5.

  You may be asked to enter your serial number for Photoshop Lightroom 4.  You can find information on how to locate the serial numbers under your account to find your serial number fast - http://helpx.adobe.com/x-productkb/global/find-serial-number.html.

• TECRA M10 (models PTM40E/PTM42E) for Windows 7 upgrade

  Hello
  We have two former TECRA M10 (models PTM40E and PTM42E) and you want to update the PC now for Windows7. After the installation of a new (larger) HARD drive, we ran the recovery DVDs. After that recovery completed successfully, we have installed a version of Windows 7 Professional (replacing the recovered Win - XP) and let Windows Update all the drivers on the Internet. After installation is complete, the majority of work and PC applications of material (e.g. display drivers where found and installed, stylus for touch screen works). But touch rotation does not work, the touchpad has also no scroll function).

  We found 47 drivers Toshiba basic support, but not of documentation on how to use them.

  Can we using this forum?

  Thanks in advance...

  Peter

  Are you sure you have Tecra M10? M4 maybe?

  On the Toshiba download page, I found only Tecra M4 with model number PTM40E and PTM42E.

• Product Information from Toshiba tool model number is "invalid".

  Just received alert Tempro about upgrading Windows 10 (currently on Windows 7)
  It will list all products which could be upgraded to Windows 10
  It seems to do that no list for my Satellite C855-1J0
  I used the Toshiba product information tool that returns information identical to that on the plate on the base of the machine.
  On which type in the update of Windows 10 box, she's back in is not a valid model number.

  The machine was bought in a shop chain throughout the country, so there is no reason to doubt of authenticity.

  Is the info on the specific plate?
  If so, then why not identified by the compatibility of Windows 10 list?
  Is it right for the upgrade?
  I have already registered on the Microsoft website "get Windows 10'.

  Toshiba take in charge that the nine models of laptops for Windows 10. For them, less than two years older laptops models are 'old' models? They don't even support Windows 8.1 laptop models for Windows 10, not to mention these models like yours with Windows 7 installed.

  Who cares what you said Microsoft, if Toshiba does support your drivers for Windows 10 laptop model because they like to have small extra margin on your model, it is not good to install Windows 10 no mater what Microsoft compatibility app tells you. Next time buy those brands that will support new drivers for laptop, more than three years, not those who, like Toshiba, who support only nine drivers with new laptop models.

• Windows will not update the screen resolution and the color depth

  Out of the blue today, my Windows XP installation had its color depth and screen resolution back to the lowest setting and whenever I try to update it refuses to put up-to-date.

  I even try to restart my computer and a bubble appears downstairs offering reset the color depth and resolution to my automatically.  When I click, it appears as if he's trying to return to normal, but again once nothing happens - the colors and the screen resolution is still at the lowest setting.

  Can any ideas on how I fix?

  Hello

  Here are some things to try to fix it.

  Change the screen resolution.

  "How the resolution screen on Windows XP"

  http://pcsupport.about.com/od/Videocards/HT/screenres.htm

  You can also right-click on an empty desktop > properties > settings > it the slider bar allows you to increase the resolution > Apply > OK > agree in the next window, etc.

  If that fixed it, have damaged you graphic drivers.

  Access the site on your computer or the manufacturer of the graphics card > look for a driver download Section > search for your model number and operating system > get graphics / video / Chipset Drivers (depending on how it is formulated) > download and install.

  Change the screen resolution.

  You can also try a system restore before all these problems started:

  "How to use System Restore in Windows XP"

  http://pcsupport.about.com/od/fixtheproblem/HT/system-restore-XP.htm

  See you soon.