Acer Aspire ES1 111 M cannot install windows 10

Similar Questions

• Acer aspire ES1-111 questions

  Hi all

  I decided to enroll in this community to get some tips and reviews the problems I am experiencing with this laptop. I own an Acer Aspire ES1-111 I bought a week ago.

  Since its first configuration, I noticed problems using it with windows 8.1 (its native operating system). For example, touchpad or keyboard not working not properly and, especially, shutdown problems. In this case specific I could never stop the device correctly, because he remained with the power indicator which continued into 'works' although it seems that the system is freezed was arrested. However, in order to really stop I had to press the power button / stop.

  First of all, I decided to reset the system with built-in software eRecovery but problems remain.

  Secondly, I decided to do a clean install of the operating system and I tried the two Windows 8 and Windows 8.1. In both cases, installation process complete without problems, but when you try to install all the drivers, I experienced freezes and once again the shutdown problems. I followed an order to install drivers (Chipset first, only VGA, etc), but in most cases, I had problems of supra. I also tried to disable "Fast start (recommended) turn" without success. 

  But now comes the strange part.

  I finally decided to give it a try for Windows 7 and, to my surprise, everything works fine! I was able to install the drivers correctly and to stop or restart my laptop without a problem. Now I use Windows 7, but, as it is under warranty, I would ask you what you think of this questions.

  I find it quite strange that a laptop does not properly with its native operating system but it is very good with an older operating system! Do you think I should send to Acer support or ask to change it (although, I don't know if I'm still able to pursue this second option).

  Thanks for your attention!

  MIC

  I think I found the reason why I was unable to run Windows 8.1 smoothly after a new installation. I tried to install it during the configuration of the Bios in LEGACY mode, which is good for the BONES before Windows 8 (like Windows 7, as it was working perfectly) but not for Windows 8/8.1 as it probably some issue when install drivers etc.

  So I decided to reset the Bios original UEFI mode. It was the right decision. Not only touchpad was recognized well when loading the USB bootable (expecially since the Touchpad has been on "Advanced", which in legacy mode, would not work), but also because, when the operating system installation process has been completed, I was able to install all the drivers hardware properly and stop/restart of operations fully worked without problems / freezes and so on.

  Hope this information is useful for other users.

• Acer aspire es1-131 display driver for windows 8.1 32-bit

  Downgrade my acer aspire es1-131 10 64-bit for windows 8.1 32-bit windows, but the acer display driver is only for 8.1 64-bit windows. There's the 32-bit driver for graphics card? TIA

  no need to buy windows 8.1 64 bits, your product key works for 64 bit also.

• Windows 8 on Acer Aspire ES1-131-C1NL

  Hello! I bought mu new Acer Aspire ES1-131-C1NL. There Windows 10 aboard, but I want to install Windows 8, not 8.1. And the question: will be Windows 8 on this machine work propely? Windows 8 support 8.1 for Windows drivers aspire es1-131-c1nl? Because I'm sure that windows 8.1 will be work propely, but I don't know what Windows 8. Please help me

  Make the drive from USB recovery Acer before do you so you can return the laptop to factory State. You will need to do a clean install of win 8 or 8.1 and you lose the recovery partitions and all the stuff of Acer.

  http://Acer.custhelp.com/app/answers/detail/A_ID/38147/~/Windows-10%3A-create-a-USB-recovery-drive-u...

  Having big problems with Win 10? It's just 8 improved Windows.

  If it runs 8.1 iy should work 8, but you could have driver problems.

  What is the problem with 8.1?

  I installed 8 Start ($4.99) http://www.stardock.com/products/start8/

  in mine and I forgot I have Windows 8.1 and there is also a 10 to start.

• Acer aspire es1-511-c665

  I have an acer aspire es1-511-c665 laptop with windows 8.1 on the right side of the laptop has a cover of the device that will fake CD cd/dvd drive Bay.  can I remove this cover and open the acer to install a reader of cd/dvd internal of my toshiba satlight lap top which has windows vista and if I can install the toshiba player what other equipment or drivers will be I need to do.

  You can install the optical drive with below mentioned specifications.

• Acer Aspire ES1 - 331 - shield Bluelight Acer does not work

  Hello, user of instant messaging of Acer Aspire ES1-331. I've used it since February 2016 with Windows 8.1

  For a long time, quick access Acer and Acer Bluelight shield worked properly but a few days ago something happened and: WiFi sharing option disappeared (it was under "Rozruch do Desktop") AQA and it has become impossible put absolute earlier when I turned it on or off, it happened immediately. Now, some points will for a few seconds and I get this:

  http://imgur.com/a/Epfjt

  It means: "you can not control the device. the same thing happens when I change the intensity of the APA - nothing changes, however she can write that it has changed. 'High' level is activated on the display, but you see that it is a lie. I use it on the Admin account of course.

  I reinstalled quick access Acer but nothing has changed and I can't use Acer Bluelight shield.
  The rest of the Acer access options fast work (Wifi and Bluetooth).

  Thanks for reading!

  Don't know why it happened, but you can try the rotation system to a job previously set up. Try the steps to do this back in http://acer.custhelp.com/app/answers/detail/a_id/37096/~/windows-10%3A-restore-windows-from-a-restor.... If Windows updates run before what happens something could have installed that caused this. Restaurant back like this should solve the problem.

• Acer Aspire es1 512 - Win 8.1 bing Win10 failed to upgrade now the code error 0xc000000f

  Hi all.
  Acer Aspire es1 512 about 8 months old... unfortunately was running that bloody Win 8.1 with Bing oem

  Started slower and slower start for no apparent reason... (+ 10 mins to start)

  Tried restoring win 8.1,repairreset palarvour and he just constantly stuck on auto repair, do nothing.

  Tried to upgrade to win 10 (the one where I'd install clean drive)... got so far and then projected black.

  Now when it boots up, I get the screen where it says that the image below

  Ok

  Just a quick update, so I'm not leaving this hanging.

  Scan found 100, in thousands of errors.

  During the next startup the laptop told me that there is no bootable operating system.

  The hard drive was dead as a dodo so he sent to Acer via UPS.

  They said that the hard drive was indeed defective and replaced the hard drive and sent it to me

  within 5 days under the 1 year warranty.

  Turn on the computer laptop and relocation of the stuff, I was immediately greeted with a "this laptop.

  can be upgraded to windows 10 '' unfortunately I don't think I'll try that again :-)

  Many thanks Acer for the fast turnaround and Ultra thanks for Ace Ironfly for taking the time

  to try to help out me.

• I have an Acer Aspire 5542. Since I was Windows 10 MyWinLocker Yo-Safe will not open.

  Hi, I have an Acer Aspire 5542.  It came with Windows 7, and had MyWinLocker Yo-Safe pre-installed.  Since I upgraded to Windows 10 MyWinLocker Yo-Safe will not open.  After I entered my password in the window of MyWinLocker Yo-Safe he said Yo-Safe is open in a small window pop up at the bottom right of the screen, but Yo-Safe will appear in the window of this PC, and the overview of the tray icon still says it is closed.

  I found the answer: open an administrator command prompt and then type in: sc mwlservice start

• Cannot install Windows 7 on Envy 14-1211nr of HP recovery disc sent twice

  Cannot install Windows 7 on Envy 14-1211nr of HP recovery disc sent twice

  The Recovery Manager starts well. He correctly completed the following steps:
  1 format HDD

  2. copy the files from the CD to the drive. It copies all the 3 CD.

  Then he ask the driver (the 4th CD) CD. Once I have this CD, then after awhile I get messge below:

  Contact HP support

  In most cases, recover the hard disk will solve your problems.

  If your problem persists, you may have to contact HP support. Find details of support HO in the documentation of your PC.

  After that I see above meaage the only button I can click is "Finish". Once I click on finish, then in a minute, I get a message that "recovery completed successfully.

  The laptop restarts and displays the message on the screen "Bootmger" not found

  I called HP support and asked to run the hard drive and memory test and he succeeded.

  I can install windows on another CD I have with.

  But I can't install WIndows using the recovery CD, I received from HP. It's the 2nd CD series that I received these don't work or the other.

  I have two identical laptops. Tried installing on both and having the same problem on both.

  Can you please help with this.
  HP sends fake CDs?

  Kind regards

  Hello

  Here is another solution, you can try to see if you can get Windows 7 to install correctly.

  Before you try the following, make sure that you can always read the character product activation key 25 on your label Windows COA (5 blocks of 5 alphanumeric games).

  An example of a COA label can be seen here.

  You can create an installation disk yourself using another PC - just download the good Disk Image ( this must be the version exact same origin supplied with your laptop ) from the link below and use an app like ImgBurn to burn the ISO correctly on a blank DVD - a guide on the use of ImgBurn to write that an ISO on a disc is here.  These Images are clean and a well respected source, however there are only limited versions available.

  Windows 7 sp1-iso-official-32-bit-and-64-bit

  Use the disk to perform the installation, enter the activation key of Windows on the label of the COA at the request and once the installation is complete, use ' 'phone Method' described in detail in the link below to activate the operating system -this made method supported by Microsoft and is popular with people who want to just have a new installation of Windows 7 without additional software load normally comes with OEM installations.

  http://www.kodyaz.com/articles/how-to-activate-Windows-7-by-phone.aspx

  All pilots additional and the software, you may need can be found here.

  Kind regards

  DP - K

• Cannot install Windows updates (has no status) on the computer desktop and laptop

  Desktop               (Purchase date: 13/07/2010)

  Model: Pavilion p6402f or 6402f

  Product: BK275AA #ABL

  Serial No.: {removed privacy}

  OS: Windows 7 Home Premium Service Pack 1 64-bit

  Product ID: {removed privacy}

  Portable               (Purchase date: 14/07/2011)

  Model: Pavilion g6 Notebook PC

  Product: QD317UA #ABC

  Serial No.: {removed privacy}

  OS: Windows 7 Home Premium Service Pack 164-bit

  Product ID: {removed privacy}

  Description of the problem: same problem on the computer desktop and laptop at the same time began: cannot install Windows updates (has no status)

  No hardware changes or software recently made to the system: I followed the usual procedure to install Windows updates.

  Method of connection: wireless

  Technical expertise: intermediate level

  Performed troubleshooting: because the error # 80071 A 90 type indicated by the system, I followed the instructions of Windows Help and Support, for example to run Microsoft Fix it which did not work; a more advanced method has also been used, who recommended to start Windows Update in Mode safe, then open Windows Update and install the updates and then restart normally. At this point, the problem was that any stage of Windows Update was available.

  Hello amib004,

  As much as I know, only Windows Update cannot be run in safe mode. That being said, I saw where install several updates may conflict with each other. Try to disable all updates installation and install the updates failed one at a time.

• Cannot install windows XP on the Satellite Pro A200-1N2

  Jin

  I have a Toshiba Satellite A200 - 1N2 PSAE3E and I don't want Vista on my laptop. I downgraded the bios to V5.30 but still cannot install windows xp and there is still no optin for SATA in the bios.

  Can someone help me?

  Thank you.

  Hello

  Did you install the SATA drivers first?
  You need this driver to recognize the HARD drive!

  You must download the Intel Matrix Storage Manager. You should find it on the page of the Toshiba driver or the Intel Web site.

  You must perform the installation of an external USB FDD drive using the F6 key during the installation of Win XP.

• ThinkPad R60 cannot install Windows XP After erasing the HARD drive using the lenovo diagnostic utility

  WinXP pro Setup cannot find that any installed HARD disk so cannot install windows. Unfortunately after many attempts to use rescue and recovery to restore the factory settings and for some reason constantly default... After leaving another utility popped up giving me the opportunity to erase the HARD drive and so I did... After fact as well and all I had was a blank screen, no windows more or no matter what utility to reinstall windows, then I used my winxp pro installation CD, but the program installation would continue not after a certain point by saying that the installation did not find any HARD disk installed. followed by "ensure that any disk HARD r turned on and correctly connected, and that no matter what material associated drive configured correctly, this may involve running a manufacturer provided diagnostic or Setup program. Clearly it took me by surprise. What was supposed to be a cut to white erase and reinstall now me baffled and angry. Formats the HDD of the solution? If so why didn't not the usefulness of lenovo do... If not, what is the problem? Someone help pls

  Welcome to the forum!

  Go into the BIOS (F1 at startup), set the "compatible" SATA mode (NO AHCI), then press F10 to save and exit, and you should be all set.

  Good luck.

• Cannot install Windows 7 Professional 64 bit on HP Envy 4-1053TX (AVL)

  1. product name and the number: HP Envy 4-1053TX (B9K16PA #UUF)

  Windows 2 operating system installed 7 Home Premium 64-bit

  3 error message/symptom: blue screen * STOP: 0x0000007B (0FxFFFFF880009A9928, 0xFFFFFFFFC0000034, 0 x 000.., 0 x 000...)

  4. all changes made to your system until the problem occurred pre-installed Windows 7 Home Premium, trying to get at operating system level to Windows 7 Professional 64-bit using free license.

  5 cannot install Windows 7 Professional 64 bit which is open license. No player appears when Windows DVD/USB boot. Tried to install when Windows is running, appear a blue screen upon restart.

  Hello

  I see that you have a problem in the installation of new Windows USB port. It seems that your HDD was not detected, right? It's because your laptop uses a SATA HDD.

  what you need to do are:

  1. download the driver AHCI SATA website of intel. (just google it)

  2. copy the files (size 700 KB for 6 files) into the new USB

  3. reboot and install your laptop with win 7 (dvd/usb)

  4. by the time win 7 installation reached the drive to install (none detected), click load drivers.

  5. now load your other USB SATA drivers.

  6. then will show all disks in your system.

  7. continue with the installation process.

  hope this helps.

• Cannot install Windows server 2012

  Cannot install Windows server 2012. Whenever I get * error

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• Error code: 80246007 (cannot install Windows Live Essentials 2011)

  I don'tseem able to install updates automatic, quest is my wide ban and they switched to norton antiviris of a care of windows live, had problems since I went.  Cannot install windows live essentials completely, still the same code error 80246007.

  I already changed the setting in "bits" to allow updates to day and downloads by following the instructions in the help, no change can not load low HP Essentials * msi.