Acer Aspire V5 473g quality problem (no touch) webcam

Similar Questions

• Acer Aspire 4530 coprocessor driver problems

  Hello

  I have this Acer Aspire 4530 running Windows 7 (32 bit) opportunity and it didn't gave me no problems so far.  When I boot, everything loads and works very well, but I now get an error message for the coprocessor indicating:

  The drivers for this device are not installed. (Code 28) There is no driver selected for the item or a set of device information. To find a driver for this device, click Update driver.

  (Location: PCI bus 0, device 1, function 3)

  When I pick up my hard drive, and the www, it can't find the drivers.  I'm at a standstill.  My laptop still works and all the programs run very well, but if I'm supposed to have a driver installed for the coprocessor, so I want to install it.  Any help would be greatly appreciated.  Thank you

  You must install the chipset driver Nvidia from here: http://www.acer.co.uk/ac/en/GB/content/drivers

• Acer aspire switch v10 wifi problem.

  Hello

  I'm sorry if this has been asked before but I looked and that you can not see this problem.

  My friend got an Acer Aspire switch V10 from the EA Store with mobile internet, but want to connect Wifi too when shes at home.

  The problem is that there is no option for Wifi everywhere where I can see. My laptop Windows 10 in the Notifications Panel and the subnet in the settings. But these are not? How to connect to a Wifi network?

  Thanks for any help you can give and, hopefully, im missing not only something

  Welly

  It is possible that it is, for some reason, got the wireless off. There is a press of button (Fn - F3 on this laptop, may vary on the switch) which enables / disables wifi on and outside. In addition, you can toggle the wifi device in network and sharing Center, go to edit the card settings. If it does not then it is possible that the driver is corrupted or missing, open the Device Manager and look for whatever it is reported as a problem. Finally, it is possible, that there is a hardware problem in which case it will not show anywhere. This requires a trip to the repair depot.

• Acer aspire S7-392-9439: problems of the internet (dns)?

  Hello

  My acer aspire S7-392-9439 was working great upward until last week, when I started having connectivity problems.

  Once from time to time (4 - 5 times in an hour), I have no internet access for a few minutes. My chrome says:

  DNS_PROBE_FINISHED_NXDOMAIN / DNS_PROBE_FINISHED_NO_INTERNET / ERR_CONNECTION_TIMED_OUT.

  The problem occurs in different WIFI networks, and everything works fine in my laptop of friends, which is connected to networks of same that I am.

  I tried netsh winsock reset and reboot. did not help.

  I would appreciate your help,
  Michael

  from an elevated command prompt (run as administrator):

  ipconfig/flushdns
  net stop dnscache
  net start dnscache

  netsh winsock reset command interface

  then restart

• Acer Aspire E5 - 473G bluetooth issues.

  I don't know if there's a thread on this issue. So be gentle with me on this one.

  In some way, while using my bluetooth headset, listening to music, the audio had disappeared. I have double/triple/quadruple checked my audio on my laptop by turning the power switch bluetooh. The sound was fine without BT, but when I turn it on, the remains of audio problems.

  So I searched on the net it and found that the issue concerned the pilot. When I opened my device manager, several bluetooth drivers related had on yellow triangles. So I "updated" these drivers and even showed "the driver/device is up-to-date. However, when I tried to use my BT headset again, it's the same thing - there was still no audio (well, technically, it was a sound confirming the pairing State / connected to my BT device, and there was still some sounds from my laptop.) But after a few seconds (about 10-20) later, the noise was gone.)

  Is there a driver that I've updated and same "downloaded" who told the driver. When he was done, somehow, I don't know why, the bluetooth on my laptop DISAPPEARED. I checked the settings of the laptop, using devices and there is no Bluetooth not found. I know that it was there before my problem happened.

  Then, I checked on my device manager to see what happened. Now, even the bluetooth device is gone.

  Then I clicked on 'Show hidden devices' and saw the BT drivers with an icon blurred. I did the update again just nothing helps. So what I finally did I "uninstalled" these drivers hidden BT. I then download new drivers of BT to the site hoping to reinstall the driver. But to my dismay, he did nothing. I checked the 'programs and Feautres' on the control panel to see if the new drivers have been installed. It's there, but my bluetooh went still.

  I know this is kind of a long post. I did it so you guys can check where I was wrong. I hope you can help me with that.

  Thank you and good day.

  My laptop specs and OS:

  OS: 10 home language Windows 64-bit (under license)

  System model: Aspire E5 - 473G

  Processor: Intel i3-5005U

  Go to programs and features and uninstall everything concerning Bluetooth. There are 4 drivers for this laptop bluetooth, try first the Atheros and if one does not work, uninstall everything that was installed before that you try the following.

  Bluetooth	Atheros	Driver Bluetooth (NFA335 HAI)	10.0.1.0	59.2 MB	25/11/2015	Download
  Bluetooth	Atheros	Driver Bluetooth (NFA435 HAI)	10.0.0.137	101.6 MB	25/11/2015	Download
  Bluetooth	Broadcom	Bluetooth driver	12.0.1.653	9.2 MB	25/11/2015	Download
  Bluetooth	Intel	Bluetooth driver	17.1.1532.1814	5.9 MB	25/11/2015	Download

• ACER Aspire E1-571 initialize problem.

  Hi everyone, I recently bought a new hard drive for my acer Aspire E1-571 gor because the old one (500 GB hitachi) "crushed". Then I did today, it's a WD scorpio blue 2.5 "320 GB. I have installed the new drive, run an installation of windows 7 x 64 ultimate edition of windows install I divided on 2 partitions, formatted and installed the system disk. Installation is completely normal and fast but the laptop keep coming at startup screen ACER logo then restarts after the instalator finished and did the final restart before you run the Windows for the first time and again and again and again to infinity so I reinstall windows once more and it's the same thing. After that, I got the new drive from the laptop and put it in another laptop of mine an Asus and windows proceeded to the desktop without any problem. So my question is what is the case, do I need a disk for acer hitachi because no other brand will not work with it or what? or maybe its a sort of Matherboard problem with the disk?
  Thanks for the help!

  Hmm, how about uefi? After a few readings in a thread, it seems that bios is one of messing around.

  see this link; http://community.Acer.com/T5/notebooks-netbooks/Windows-7-UEFI-install-on-aspire-E1-571/TD-p/50201

  or perhaps this, simple and could be much more useful, http://community.acer.com/t5/Notebooks-Netbooks/Installing-Windows-7-on-acer-aspire-E1-571G/td-p/930...

  some posts here might be useful (as I browse some of them, some say install win7 on GPT with active uefi)

• Acer Aspire 5738Z Driver Hotkey problem

  I bought a laptop (Acer Aspire 5738Z) with Windows 7 Home Premium x 64 installed. Of course, the laptop came with many other software pre-installed Acer. I reinstalled W7 Home Premium, repartioned my HARD drive, I did a clean install (formatted the HARD drive, repartioned he C, D partitions). After that, I installed all the drivers for my system drivers download Acer.com section.

  I have a few keys on my laptop (wireless, bluetooth, Backup Manager - 3 keys in the left corner of the keyboard). (volume and the "P" key (I read what a user programmable key) in the right corner of the keyboard).

  After the driver installation of "Launch Manager" which is of these keyboard shortcuts, the 'P' key does not work properly (eg. Before reinstall W7 this key launched an application in which I could define what App should be open when I press (e.g. open the browser)) now it opens a window in which I can set these keys (http://img838.imageshack.us/img838/2117/pkey.jpg), but I don't have them on my laptop.

  My question is: How can I install the driver that came with my laptop for the P key opens the user-defined application and not the window you can see in the link I posted. Please help, I tried over and over again on the internet but I can not find a solution. Thanks (sorry for my English if I get errors) If you have any questions for me, I'll be there to answer.

  I bought a laptop (Acer Aspire 5738Z) with Windows 7 Home Premium x 64 installed. Of course, the laptop came with many other software pre-installed Acer. I reinstalled W7 Home Premium, repartioned my HARD drive, I did a clean install (formatted the HARD drive, repartioned he C, D partitions). After that, I installed all the drivers for my system drivers download Acer.com section.

  I have a few keys on my laptop (wireless, bluetooth, Backup Manager - 3 keys in the left corner of the keyboard). (volume and the "P" key (I read what a user programmable key) in the right corner of the keyboard).

  After the driver installation of "Launch Manager" which is of these keyboard shortcuts, the 'P' key does not work properly (eg. Before reinstall W7 this key launched an application in which I could define what App should be open when I press (e.g. open the browser)) now it opens a window in which I can set these keys (http://img838.imageshack.us/img838/2117/pkey.jpg), but I don't have them on my laptop.

  My question is: How can I install the driver that came with my laptop for the P key opens the user-defined application and not the window you can see in the link I posted. Please help, I tried over and over again on the internet but I can not find a solution. Thanks (sorry for my English if I get errors) If you have any questions for me, I'll be there to answer.

  Access the website of Acer drivers at the link below > get latest drivers for Windows 7.

  Acer support:

  http://support.Acer.com/

  Acer support at the above link

  http://support.Acer.com/drivers_download.aspx

  Driver Acer downloads at the link above

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forums.

  There is a list of the Windows 7 Forums at the link above to help you.

  You get the help you need there.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• Acer Aspire one notebook - browser problem

  My husband wanted to change the browser and has disabled something, we don't know what. Laptop connects to the wifi, but nothing happens when you click on the button of the browser. The thing is so fundamental it seems to be everywhere to seek to resolve the problem.

  Can anyone help?

  Without knowing what you were doing, it would be very difficult to help you correct the problem.

  Change the browser can be as simple as download another browser, like Firefox, Chrome, Safari or Opera.

  You can try to restore what you did by accessing restore points and restore before when you changed.

  It is also possible to fully restore the system using eRecovery and restore the system to factory settings.  Make sure that you want to keep all the data is saved, before using this option.

• Acer Aspire TimelineX 3820 t - Windows Update - Synaptics Touch Pad conflict

  Hello

  I just bought an Acer Aspire TimelineX, 3820 T. It's like a Synaptics Touchpad, which works fine until I do a Windows Update. Once I do the update of Windows, the touch pad doesn't work. Even if it works, there is no control over the touchpad. It is an old laptop of the week and I won't send it to Service Center for repair. Also, I'm afraid to get Exchange of the same model, since it is a software problem with Windows update and could be the same thing with another of the same model. I disabled the Windows Update and there is no problem since then. But with the new laptop, I cannot deal with Windows update and will be updated soon.

  Help, please!

  Welcome & thank you for your comments but I said nothing about disabling the automatic update from Windows Update.

  See...

  Understand the automatic Windows Update
  http://Windows.Microsoft.com/en-us/Windows7/Understanding-Windows-automatic-updating

  Updates: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/updates-frequently-asked-questions

  [Maybe you want to disable the automatic installation of the driver & other option updates or maybe just change the way which THE supply & install updates by my previous answer?]

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Problems with Acer Aspire V5 - 573 G UEFI?

  Hello

  I have Acer Aspire V5 - 573G. Before all the problems start I used Legacy BIOS mode with 10 Windows Pro 64 bit OS. Have the latest BIOS v2.30.

  So, recently, I decide to move from the Legacy BIOS UEFI and reinstalled Windows 10 Pro 64-bit with UEFI mode activated with the GPT partition style. Everything went well with the installation.

  Now I am facing following issues with UEFI and Windows 10 witch, which I didn't in Legacy BIOS mode:

  1. When the laptop goes to sleep and is not touched for a while, I can't wake up to laptop. Press any key on the keyboard or touch the touchpad don't wake it either. Only way is to press the Power button to stop completely and then turn it back on. I don't know if it's something to do with the Windows settings to resolve this problem.
  2. Restart Windows sometimes stop laptop computer. It's really strange... Windows shows it restarts, screen goes black and does not start, instead it laptop shutdown. ??
  3. And when I shut down the system, it is not entirely clear. Often the blue light continues to blink, CPU and GPU fans are always and still closing system entirely to press on the button / stop.

  These issues are somehow related to UEFI, because I had no such problems with the traditional mode and Windows 10. This is starting to annoy me when the laptop stops completely.

  Any help on this?

  Thank you!

  http://community.Acer.com/T5/Windows-10/Acer-Aspire-S7-stuck-in-sleep-mode/m-p/427855#M3432

  http://community.Acer.com/T5/Windows-10/aspire-V5-573G-freezes-instead-of-sleep-irregularly-not/m-p/...

• Help! -Acer Aspire all-in-one touch screen after upgrade Windows 8 Pro

  Hi all!

  This is a rather confusing questions and about * me off no end!  I know that some of you may have encountered this already and could have a potential solution?

  I have an Acer Aspire all-in-one, AZ5101 (Aspire Z5101), with 4 GB of RAM, etc..

  Since the Developer Preview of Windows 8 came out, I've been running Windows 8 perfectly.  I completely uninstalled (each time itself) and run the following:

  Windows 8 Developer Preview, 64-bit

  Windows 8 Preview of consumer, 64-bit

  Windows 8 Preview, 64-bit version

  In any case, on this PC worked perfectly - y INCLUSIVE of the TOUCH SCREEN.  I never had a problem.

  So far so good.  Then, they finally released updates Windows 8 Pro official licensed by download.  I bought the upgrade and downloaded.  Just like in * ALL * other cases, upgrade, I chose "keep nothing" of the old system (I never really got all the important data on here), and do the upgrade itself.

  After the upgrade was complete, and ALL Windows 8 Pro updates have been applied by Windows update, I have a system where the screen is clear and precise, everything works, and all devices in Device Manager, show the Greens well, it works fine - NO ERRORS.  HOWEVER - NO CONTACT!  No touch no screen function at all.  The screen now has this time as a standard monitor.

  I tried the driver Idéacom - no luck.  Anyone know (please? LOL) how to get the touch screen to work again?  Thank you very much!  I really appreciate any help you can give.  Microsoft technical support had NO idea and no reply emails from Acer! Laughing out loud

  Thanks again,

  Mike

  [edited to conform to the guidelines]

  Hello Mike

  I sent the pilot. Please test and advise.

  Kind regards

  FReeZA

• I can't open my application in my Acer Aspire V5 touch (Windows 8)

  Hello world.

  Please help me. I have this problem with my laptop computer touch Acer Aspire V5 Windows 8... I can't open my apps such as Mail, people, e-mail, camera and other applications in the menu START computer laptop said. Whenever I open these applications, it will just load, and then suddenly it will return to the menu and START...

  Hi Sir,

  Thank you very much for the help. I already solved the problem. also the camera, I just uninstalled and installed again and it's working now.

• Boot Acer Aspire E1 problem

  I have an Acer Aspire model E1 Q5WPH, runnng Windows 8.  All has been well until this week when the screen started flashing random colours.

  I put the power off and then it won't start back upward.  Power seems to happen as it starts the DVD player, but then the power led goes off - then turn it back on and the process continues until I turned off the machine again.

  Is this a known problem and is there anything to do about it?

  Hello

  Check if you have the extended warranty or service plan of the store that you got of the device, which can help you save a few $s.

• Hi there I have an acer aspire one and I have a problem with my wireless connection.

  Hi there I have an acer aspire one and I have problems with my wireless connection.it is connected, but I can't use internet.any thoughts? Thank you

  A look at the "front" face, under the lip of the keyboard, similar to where a lock would be on a laptop. There is here a cursor that is not a lock, but it is a switch that activates / deactivates him wireless on and outside. Slide it on until it turns on the light above it (with the logo of the antenna), indicating wireless is turned on and drag it again to turn it off.

• I formatted my computer to windows xp, I have an acer aspire m5100 is the message I get [error number: 0x8024400A] the website has encountered a problem and cannot display the page you are trying

  I formatted my computer to windows xp, I have an acer aspire m5100 is the message I get [error number: 0x8024400A] the website has encountered a problem and cannot display the page you are trying

  Sasha,

  What browser (exact version). ?

  Harold Horne MVP on September 24, 2012

  0x8024400a

  You must be at Service Pack 3 level before you can use Windows updates.

  To determine which service pack is currently installed on your computer, follow these steps:

  1. on start and then click Run.

  2 copy and paste, or type the following command, and then click OK:

  winver

  A dialog box displays the version of Windows and the service pack that is currently installed on your computer.

  See also: http://support.microsoft.com/kb/2497281>

  You may be unable to access the Windows Update of Windows XP Web site.

  If you haven't already done so, you will need to install the SP2 and SP3 (SP1 note no longer exists).

  How to obtain the latest Windows XP service pack

  http://support.Microsoft.com/kb/322389>

  SP2 - http://www.microsoft.com/en-us/download/details.aspx?id=28>

  (for single PCs too)

  For Windows XP Service Pack 2 installation procedure

  http://support.Microsoft.com/kb/875364>

  Steps to take before you install Windows XP Service Pack 3

  http://support.Microsoft.com/kb/950717>

  It is stated in "How to obtain the latest service pack XP" is.

  If you have problems obtaining the service pack from Windows Update, you can download the package of standalone update from the Download Center.

  This page will say that this installation package is intended for it professionals and developers. However, you can download this file safely.

  The following file is available for download from the Microsoft Download Center:

  Download the Windows XP Service Pack 3 package now

  FIRST: Uninstall IE8 and IE7 if they are installed. Back to all the way back to IE6. You want other patches before you get those. Reboot after doing this.

  You are not the first to ask questions about how to upgrade a clean Windows XP - not even installation in the last week. In fact, I will just cut and paste my answer here... here:

  Get SP2 (manually) and save it to your desktop. (There's a link here.) [You are a COMPUTER professional for now.]

  Install it.

  Then restart at least a couple of times for a few minutes between each restart.

  Get SP3 (manually) and save it to your desktop. (There's a link here.) [You are a COMPUTER professional for now.]

  Install it.

  Then restart at least a couple of times for a few minutes between each restart.

  Download at least Internet Explorer 7 (if it is not Internet Explorer 8).

  Install it.

  Reset.

  Now, try to get the updates through the normal web page (http://windowsupdate.microsoft.com/) and see how much more you can get (100 +) and keep checking until you no longer have.

  Back - let everyone know if it worked for you.

      
  

  UTC/GMT is 14:12 on Sunday, October 28, 2012