Acer Aspire 5738Z Driver Hotkey problem

Similar Questions

• Acer aspire switch v10 wifi problem.

  Hello

  I'm sorry if this has been asked before but I looked and that you can not see this problem.

  My friend got an Acer Aspire switch V10 from the EA Store with mobile internet, but want to connect Wifi too when shes at home.

  The problem is that there is no option for Wifi everywhere where I can see. My laptop Windows 10 in the Notifications Panel and the subnet in the settings. But these are not? How to connect to a Wifi network?

  Thanks for any help you can give and, hopefully, im missing not only something

  Welly

  It is possible that it is, for some reason, got the wireless off. There is a press of button (Fn - F3 on this laptop, may vary on the switch) which enables / disables wifi on and outside. In addition, you can toggle the wifi device in network and sharing Center, go to edit the card settings. If it does not then it is possible that the driver is corrupted or missing, open the Device Manager and look for whatever it is reported as a problem. Finally, it is possible, that there is a hardware problem in which case it will not show anywhere. This requires a trip to the repair depot.

• ACER Aspire E1-571 initialize problem.

  Hi everyone, I recently bought a new hard drive for my acer Aspire E1-571 gor because the old one (500 GB hitachi) "crushed". Then I did today, it's a WD scorpio blue 2.5 "320 GB. I have installed the new drive, run an installation of windows 7 x 64 ultimate edition of windows install I divided on 2 partitions, formatted and installed the system disk. Installation is completely normal and fast but the laptop keep coming at startup screen ACER logo then restarts after the instalator finished and did the final restart before you run the Windows for the first time and again and again and again to infinity so I reinstall windows once more and it's the same thing. After that, I got the new drive from the laptop and put it in another laptop of mine an Asus and windows proceeded to the desktop without any problem. So my question is what is the case, do I need a disk for acer hitachi because no other brand will not work with it or what? or maybe its a sort of Matherboard problem with the disk?
  Thanks for the help!

  Hmm, how about uefi? After a few readings in a thread, it seems that bios is one of messing around.

  see this link; http://community.Acer.com/T5/notebooks-netbooks/Windows-7-UEFI-install-on-aspire-E1-571/TD-p/50201

  or perhaps this, simple and could be much more useful, http://community.acer.com/t5/Notebooks-Netbooks/Installing-Windows-7-on-acer-aspire-E1-571G/td-p/930...

  some posts here might be useful (as I browse some of them, some say install win7 on GPT with active uefi)

• Acer aspire S7-392-9439: problems of the internet (dns)?

  Hello

  My acer aspire S7-392-9439 was working great upward until last week, when I started having connectivity problems.

  Once from time to time (4 - 5 times in an hour), I have no internet access for a few minutes. My chrome says:

  DNS_PROBE_FINISHED_NXDOMAIN / DNS_PROBE_FINISHED_NO_INTERNET / ERR_CONNECTION_TIMED_OUT.

  The problem occurs in different WIFI networks, and everything works fine in my laptop of friends, which is connected to networks of same that I am.

  I tried netsh winsock reset and reboot. did not help.

  I would appreciate your help,
  Michael

  from an elevated command prompt (run as administrator):

  ipconfig/flushdns
  net stop dnscache
  net start dnscache

  netsh winsock reset command interface

  then restart

• I need a new wifi adapter for my Acer Aspire 5738Z (SNID 95105981420)

  The problem is that Acer doesn't accept my serial number! The missionsdiplomatiquesetrangeresa on my laptop reads LX *, but I can't use it to get information about my Atheros wireless card. I want to buy a new one, but because I need to know what type I need.

  [private under the leadership of life]

  This model uses a minimap Wireless PCI-Express.

• Acer Aspire one notebook - browser problem

  My husband wanted to change the browser and has disabled something, we don't know what. Laptop connects to the wifi, but nothing happens when you click on the button of the browser. The thing is so fundamental it seems to be everywhere to seek to resolve the problem.

  Can anyone help?

  Without knowing what you were doing, it would be very difficult to help you correct the problem.

  Change the browser can be as simple as download another browser, like Firefox, Chrome, Safari or Opera.

  You can try to restore what you did by accessing restore points and restore before when you changed.

  It is also possible to fully restore the system using eRecovery and restore the system to factory settings.  Make sure that you want to keep all the data is saved, before using this option.

• Acer Aspire V5 473g quality problem (no touch) webcam

  Then Yes. The title is self explanitory. I have this laptop and the webcam looks terrible. And I mean really TERRIBLE. It seems that I'm looking at a rendering of DOOM 2 myself, and it's a relatively new laptop. My sister has a V3 and the cam is at least decent, but this one on this thing... It's WICKED!

  I just want to know if it's a software problem, or really a hardware problem. Thank you!

  I was able to fix already. Mainly through drivers software, Crystal Eye and juuust enough hummus

• Aspire 5738z motherboard works outside the laptop breaks but not?

  Hope this is the right part of these forums...

  Someone at - he heard of this before. (STUPIDLY), I decided that my fan needed a good, clean, and in a moment of madness I removed the heatsink and cleaned, I have had no paste to renew with at the time but thought it would be ok.

  Acer Aspire 5738Z dedicated ATI Graphics Intel Core 2 Duo

  I missed the fan plug when I re assembled the laptop and of course, it wouldn't start. So after back by getting the cleaners and stick and PLUG the fan, I tried to start again... Nothing to do apart from the fan works and stops, then comes back on - the power light lights up - the processor lights up for a second - and the cd tried to run.

  I did all the usual like removing the Ram etc Hold button power and did so on... still no joy

  So I stripped the motherboard into the case and everything took off, I have replaced the following only

  HARD DRIVE

  1 x 2 GB Ram

  Monitor

  Battery

  And success, that it starts without a problem

  I tried then restarts and they were very good, so I put everything together and nothing only happened?...

  So I stripped it again and this time I plugged everything

  HARD DRIVE

  2 x 2 GB Ram

  CD/DVD

  Monitor

  Battery

  WiFi

  USB mouse

  USB keyboard

  Began and once again without any problem she started and restarted a time without end. So I removed all and placed in the base of the case and then reconnected everything and got the same good boot. I then placed the upper part of the base on so he was running and it was fine, then I rebuilt around the laptop running until the unit was together again... Always slept running. Although my mousepad not working keyboard

  OK, the moment of truth... Restart... or rather not - back to the beginning with no boot

  Does anyone have any idea as to the cause - I wonder if the keyboard or mouse may be at fault, but as far as I know, it could be more sinister.

  Any help would be fantastic - but please no suggestions to remove the ram and pressing the power button down as my finger no headache trying this lol

  It seems to me the connection of the USB unit on the side of right which is at fault. I have rebuilt the laptop but removed the USB cable and it works fine... Looks so much like problem solved for the moment in any case

• Acer Aspire 4530 coprocessor driver problems

  Hello

  I have this Acer Aspire 4530 running Windows 7 (32 bit) opportunity and it didn't gave me no problems so far.  When I boot, everything loads and works very well, but I now get an error message for the coprocessor indicating:

  The drivers for this device are not installed. (Code 28) There is no driver selected for the item or a set of device information. To find a driver for this device, click Update driver.

  (Location: PCI bus 0, device 1, function 3)

  When I pick up my hard drive, and the www, it can't find the drivers.  I'm at a standstill.  My laptop still works and all the programs run very well, but if I'm supposed to have a driver installed for the coprocessor, so I want to install it.  Any help would be greatly appreciated.  Thank you

  You must install the chipset driver Nvidia from here: http://www.acer.co.uk/ac/en/GB/content/drivers

• Video driver problem Acer Aspire 5334

  Acer Aspire 5443 of my child worked well for years, and then she "cleaned things" or run Windows update & the problems started with the video.  I could not solve Windows 7 Home Premium 64 bit crashing.  The best I after factory default charging system, basic VGA.  As soon as the updates are detected and applied for graphics cards, it flashes to black screen / distorted when Windows opens, then crashes, usually with a message that the adapter detected a problem & recovered - all frozen.  Shows Device Manager two instances of the Mobile Intel(r) 45 Express Chipset Family MS Corp - WDDM 1.1.

  I've updated the bios BIOS v1.06 & vga to v1800, ran Windows Update, try to find/load drivers Intel GMA 4500 m, install the updates to intel chipset, all to the same effect - it crashes.  I delete one instance of the device, same thing.  The only thing that I can do so far is to disable graphics cards.  The latest driver from Acer do not fix it.  What is happening with this?

  Have you tried to install this driver (Mobile Intel 4 Series Express Chipset Family):

  Intel GMA driver

• Acer Aspire its problems after Win 7 Pro and the new installed HARD drive

  I have an acer aspire 8735 laptop g-6502 which has recently undergone a WD 500 GB drive HARD failure. I replaced that with a 7200 RPM Hitachi 1 TB drive and given that I don't have a Win 7 original used a disk Win 7 Pro with an extra friend.

  Windows 7 Pro and HARD disk installation went smooth. But now when I plug an HDMI cable to watch through my Marantz receiver, comes from the video, but I have to do manually the Marantz the default audio device for sound. When I unplug the HDMI, I must return to the parameters of sound and unenable Marantz and re - activate the Realtek audio.

  Before the drive died HARD, happen all perfectly when you plug the HDMI cable in and the fact to disconnect without any fiddling around with settings.

  I also have a few other questions:
  1. the touch volume control next to the numeric keypad does not control the volume more
  2. the keyboard key used to have a setting to display it. You can use two fingers on a tablet to drag the image to the screen bigger and smaller.

  I looked the site of Acer and also used my drive Application and drivers to reinstall everything that looked related to these issues. When first, I installed Win 7 Pro I let Windows find the appropriate drivers. It worked for some things but not others.

  Any ideas? I have a few scratches on my face and my forehead in frustration pain making me beat me here. Funny, but true, so all ideas are appreciated!

  Here's my screen design Mgr impression - there's an 'unknown' device IDK how to understand what it is.

  

  Hello...

  You have installed the application to launch mnager. Alternatively you can install from this link and check the function of touch volume control and display adjustment launch application manager

• Problems with the driver of the sensor on the windows 10 x 86 with the Acer Aspire Switch 10 E company

  Hello

  I installed windows 10 x 86 business on my Acer Aspire switch 10F, because there were 10 x 86 host windows install before and I couldn't get into my computer in the domain. Now, the computer is in the domain, but I have problems with drivers. I tried to install all the drivers that are on the site acer for my Acer Aspire switch 10F. And then I did the windows updates, but I have 2 drivers that do not work is the one whose name is "Kionix sensor Fusion device" and the other whose name is 'Micro Capella CM3218x ambient light sensor. Without these drivers, I can't activate the automatic rotation for when I want to use my device in the form of tablets and I can't use the automatic brightness for display.

  can someone help me please? Thank you.

  Sellion

  The answer of the Acer support is that this computer is not done for the company and it will never be drivers for the HOME version of windows 10 x 86 version.

• I need to replace the hard drive of my Acer Aspire all-in-one 5600U?

  I have an Acer Aspire all-in-one 5600U. The other day the power in our House went out due to a storm. After she came back and went to use my computer, the screen was black and said "Reboot and select proper... boot device." ». I tried to download the tool of creation of media to a USB port and start the system using this. I can get into the menu troubleshooting but nothing works. When I try to make a custom Windows installation, it says "no signed device drivers were found". What is a hard drive problem? In the BIOS, under Boot Options is does not list a specific hard drive. It just says: 'hard drive '. Thanks in advance for any help or suggestion.

  Thanks, that's what I needed to know. Appreciate the help, IronFly.

• Acer Aspire HD E1 graphics driver - 571-4000

  Hello, I tried to update the HD Graphics 4000 driver in my Acer Aspire E1-571 and I'm able to get the latest version of the driver works very well from the Acer support page. However, this driver is almost 3 and a half years now or dates from 2012 with the fact that every time I encounter a problem with a modern game support always telling me to update my drivers. The latest driver from Intel page is perhaps not more than two months. I am aware that the driver must come from the OEM for him to be recognized, but decided to opt for a workaround see if I could update it in any case.

  I tried the advice from the support page from Intel to uninstall the driver from Acer and do a fresh reinstall with the latest Intel driver instead, but it does not work. It seems that it only allows for Installer try to install it but fails halfway through, as supposed is not at all tell me to go to my OEM. It seems that Acer genuneily uses the custome for its driver software and if the latest driver must be provided.

  I'm I missed something here, this is really the last version supplied by Acer and would it be possible for Acer to release a newer version. I also checked with people who use an HD Graphics 4000 and they do not seem to meet the same problems I did when using DX11. Which none use Acer laptops.

  My characteristics are i5 - 3210 M 2.5 GHz with Turbo boost of 3.1 GHz technology

  8 GB RAM DDR3

  Version number of Intel Graphics HD 4000 9.17.10.2867

  I finally found the solution, you had reason to propose a system reset but that only highlighted the real problem. It was a combination of issues, hive corrupted corrupted windows installer and interference from program files. I recommend to anyone who tries this correction to create a Windows easy transfer file and backup register and license keys.

  First of all, I tried to do a refresh of the system and then install the driver, even though I've updated first he failed and blue screened after the installation of the driver as he had not the necessary DirectX update. Which implies that updates has not really saved. I opened a restore point to back up the system and he projected blue perma then. The system repair tool is not actually grant me access to the restore point to try again. To work around this problem, I opened the disk part via the command prompt in the advanced and then forced Startup Repair tool permissions. To do this, I typed first 'Diskpart', then 'list volume', then select the disk D and C drive by their volume number. For my part D training was 0 and C disk 1, then withdraw their letters and assign again so that the primary drive is drive C (even if it does not change letters volume the end of it, it will always be you grants the permissions you need). This love so much "select volume 0", "Remove letter = d','select volume 1','Remove letter = c','select volume 1','affect letter = c',"select volume 0", " affect letter = d'. "" "" Then type 'exit' and 'rstrui.exe'. Perform the restore from here point and you should be able to continue the restore point.

  With myself however, the restore point has been so severely altered it could not load up, worse yet, I was not able to make an another refresh or reset. I discovered that this was due to corrupt hive files, I renamed to solve this problem through the command-line as follows, ""C: ', 'cd %windir%\system32\config', "ren system system.001", "ren software software.001', 'exit'." This then allowed me to perform a system reset.

  The first thing I tried to do was last updated in the system and even once, it has failed, it is constantly necessary to restart and wouldn't install anything. After you perform a clean boot, I realized that it was interference program McAfee and after he could not afford to be disabled I uninstalled it completely (I might have updated to see if he would settle the matter, but at this point, I was losing patience). Procceded updates until the end of the first batch. After that, the update has been stuck in a loop of always trying to find updates but never finished. It was because corrupt windows files from the installer, to solve this problem, I restarted the machine to make sure that the update has been closed and I opened as an admin command prompt so I could rename them and force the system to make new files by typing the following. "net stop wuauserv", "net stop cryptsvc", "net stop bits. Then type "ren SoftwareDistribution.old C:\Windows\SoftwareDistribution", "ren C:\Windows\System32\catroot2 catroot2.old. Then type 'net start wuauserv', 'net start cryptsvc', 'net start bits' reactivate the update and then restart the computer. The update then worked fine until he hit Security Windows KB2756872 solve this I used a manual installation.

  Available to the Update for Windows 8 for x 64 systems (KB2756872) - Microsoft and then select Windows8-RT-KB2756872-x 64.msu (162.8 MB).

  After this all updates completed fine, I created my restore points (and a backup just in case restore point) and continued to install the driver manually. It worked the first time after having solved the problems. I use Windows easy transfer to restore all the files and after I re - install my programs, I'll be as good news.

• Acer Aspire V15 Nitro replace SSD HARD drive

  I bought this laptop in March 2015. This laptop comes with 1 TB of HDD.

  I wanted to replace the HDD SSD but I called the service center (Service of Highpoint), Acer technician told me that there is no way to replace with SSD because the port is different, any SSD can also compatible with this laptop HARD drive port.

  This make me very confuse because I search in google, replace with SSD is quite possible.

  So I'm here to ask for advice. Hope can get a response. Thank you.

  Published:

  My laptop model: Acer Aspire V15 Nitro Black Edition (VN7 - 591 G)

  -Core i7 4710Q

  -12 GB OF DDR3 RAM

  -HARD DRIVE 1 TB

  -NVIDIA GeForce GTX 860M

  you have 2 options on your laptop:

  (1) switch for one SSD 1 TB HARD drive

  (2) add an SSD on form factory M2 on its location (top-left, near the fan), so you can have installed SSD and HDD

  the second option, other users have done so, and sometimes they have had some problems during the recording of the SSD as first boot device (or window Boot Manager), since the BIOS tries to boot from SATA port.

  You can force it by pressing F12 at startup and select the appropriate boot device.

  It is up to you.